Used Elsterwerda Electromagnet for sale (310)

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm Dsdpfoy Du N Usx Aa Nocg TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm Dcsdpfewlvlasx Aa Neg spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: used, machine/vehicle number: 10E5T60-1001, KEB Automation EMC Filter, part no. 10E5T60-1001, is an advanced passive component from the COMBILINE series, designed to eliminate high-frequency electromagnetic interference in drive systems. The device is specifically dedicated for use with KEB COMBIVERT F5 series inverters (housing sizes F4 and F5). Technical Specification: Dcjdsy Dqbmepfx Aa Nsg - Rated Voltage (UL): 480V AC - Max. Input Voltage: 3-phase, up to 528V AC - Rated Current (UL): 6.7 A - Rated Current (nominal): 8.0 A - Mains Frequency: 50/60 Hz - Number of Phases: 3 phases + PE - Operating Temperature Range: up to 45°C (Class 3K3) - Protection Degree: IP20 Key Functions and Application: - Interference Suppression: The filter effectively blocks conducted radio frequency interference (RFI/EMI) in the range of 150 kHz to 30 MHz. - Mains and Device Protection: Prevents harmonics generated by high-speed IGBT switching in inverters from entering the power grid, protecting sensitive electronic equipment. - Standard Compliance: Helps meet EMC requirements according to EN 61800-3 for categories C1 and C2. - Mounting: Designed for control cabinet installation, often on a 35 mm DIN rail.

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 1,80,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 1,80,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Dcsdpfx Aaewdmy So Nog Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: used, functionality: unexamined, machine/vehicle number: M11359*17765, Year of construction: 2018, Swedish Manufacture Load Capacity & Mast • Load capacity: 12,000 kg at 1,200 mm load center • Mast: Duplex standard o Lift height: 6,500 mm o Collapsed height: 4,895 mm o Extended height: 8,100 mm o Free lift: 0 mm • Tilt: 5° forward / 10° backward _____ Dimensions • Length: 5,205 mm • Width: 2,550 mm • Height: 2,905 mm • Wheelbase: 3,500 mm _____ Attachment: STEINWEG Stone Stacking Grab Type HG1T-6000S • Gripping range: 0.96–1.00 m • Opening range: approx. 0.6–1.3 m • Gripping height: 1.3 m (special height) • Grab capacity: 6,000 kg • Double gripping rails: 1 pair, shock-absorbed plastic jaws, length: 2.3 m • Pendulum-mounted • Forklift carriage arm: Double-beam design, with endless rotator and pendulum suspension, capacity: 8,000 kg at outreach 1.6–2.1 m • Hydraulic outreach: 1.6–2.1 m • Stabilizers: 2 units for compensating pendulum movements • Integrated sideshift: travel 250 mm • Lock valves: Electromagnetic, 24 V DC _____ Wireless Pressure Monitoring • Transducer: Wireless transmission, frequency 868.4 MHz • Temperature range: -30°C to +85°C • Battery: 3.6 V lithium, approx. 1 year lifespan (with 5-second interval) • Receiver: Digital display, signal lamp, control box mounting _____ Powertrain & Chassis Component Description Engine Volvo TAD-871-VE, 6-cylinder, 185 kW at 2,200 rpm, 7.7 L displacement, 1,160 Nm, EU Stage IV Transmission ZF 4WG-191 automatic, 3+3 gears Drive axle Kessler D81 Steer axle Hydrostatic, double-acting steering cylinder Tyres Drive axle: 4 × 12.00 × 20" Solid Hauler Steer axle: 2 × 12.00 × 20" Solid Hauler Braking system Oil-immersed wet disc brakes, hydraulic parking brake (spring applied, electronically controlled) Hydraulics Parker load sensing system, variable pump capacity, 4 servo-assisted control levers Electrics 2 LED front headlights, 2 LED work lights on mast, 4 indicators, LED rear lights, CanBus control for engine, transmission and cabin _____ Cab & Equipment • Driver's seat: BeGe 9100, air-suspended, 2-point seatbelt • Cabin: OPTIMA, ergonomic, high noise and vibration insulation, hydraulically tiltable to the side, 2 doors, tinted windows, sliding windows on both sides • Windscreen wipers: front, roof, rear window incl. washer system • Steering wheel console: Adjustable • Heater & defroster • Interior cabin lighting • Rearview mirror, parking brake warning buzzer _____ Additional Equipment • Mud flaps front & rear • Exterior rearview mirrors on fender (high) • Turbo II Heavy Duty air filter • Additional hydraulic function • Quick couplings on fork carriage Dodpfx Aeyyvvhsa Njcg • Hydraulic accumulator/vibration damper 60 bar/2 L • Hydraulic oil tank pre-heating • Additional LED work lights (2x on mast) • Reversing alarm, LED beacon • Electric cables above mast • Power connection 400 V, 3-phase • Blue Spot front and rear • EMC 107 electronic weight display (0.1 t) • EMC 114 electronic joystick with RPM boost • EMC 122 speed limiter 20 km/h, switchable to 15 km/h • Electric seat heating • DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers • Intermittent wiper • ACC air conditioning • SMV universal mounting rail • Movable A4 writing pad • Diesel parking heater + engine water heater

Condition: new, 20 mm 40 mm MK 4 spindle stroke 160 mm throat 300 mm column diameter 145 mm 615x430 mm Dcedpfx Asyv Nxboa Nog 2x14x224 mm distance spindle /table 147/688 mm feed 0,1-0,2-0,3-0,4 mm/U 140-4000 U/min. total power requirement 4,0 kW Machine height 1885 mm Standard equipment: - Electromagnetic feed clutch with overload protection and electrical    Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class "F" - Spindle protection with electrical protection

Condition: used, Year of construction: 1978, grinding length 600 mm grinding width 300 - 320 mm Electromagnetic clamping plate 500 x 200 mm Dcsdocwic Iepfx Aa Nsg Important note! There is no hydraulic and no coolant unit included! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 2024, operating hours: 200 h, condition: excellent (used), functionality: fully functional, Industrial food-grade conveyor metal detector for production line quality control. Fully operational and ready for immediate use. This Jindun JD-602 was previously utilized in a food production facility and has been professionally maintained. Constructed entirely from 304 stainless steel, with a food-grade blue conveyor belt, the unit is specifically designed for hygienic food processing environments. The electromagnetic detection tunnel reliably locates ferrous, non-ferrous, and stainless steel contaminants within processed products. Dcjdpfx Asyzwp Soa Nog KEY SPECIFICATIONS: • Model: JD-602 Conveyor Metal Detector • Manufacturer: Guangdong Jindun Electronic Technology Co., Ltd. • Year of manufacture: November 19, 2024 • Serial Number: 20241119010919 • Power supply: 220V, 50Hz (single-phase) • Chassis: 304 stainless steel • Conveyor belt: food-grade (blue) • Control interface: Color LCD touchscreen (English/Chinese) • Detection capability: ferrous, non-ferrous, and stainless steel metals FEATURES: ✓ Fully functional – all features in working order ✓ Food-grade design compliant with HACCP / BRC / IFS requirements ✓ Ideal for testing dry products Reason for sale: Upgrade / surplus to requirements. Inspection and testing available by arrangement. Delivery or collection can be organized upon request.

Condition: reconditioned (used), Year of construction: 2020, The DMK 20 C table cutter is the ideal solution for small to medium-sized meat processing businesses, upscale gastronomy, as well as large kitchens and catering, due to its compact, robust, and precise design. Its well-engineered construction offers users virtually unlimited versatility in all application areas. The machine is equipped with two independently operated, powerful motors, providing a wide range of control options. With the optional robust, mobile base frame, the desired mobility is ensured. You will receive an invoice with VAT shown. Our used equipment service for you: • 6 months warranty on electrical components, limited to the replacement of defective parts, excluding removal and installation costs • High-quality branded equipment at fair prices • Professional overhaul, inspection, and expert cleaning • Tested and fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase Dedpeyx A Riefx Aa Nocg • Provision of operating instructions, wiring diagrams, and spare parts • Safety inspection in accordance with DGUV V3 Professional engineering in a compact space: The DMK 20 C2 table cutter is distinguished by its exceptionally smooth and low-vibration operation, even at high speeds. The elaborate manufacturing of each component is carefully and precisely matched. The thick-walled cutter bowl, cast from high-quality stainless steel, provides extremely accurate concentricity, enabling tight adjustment of the cutting blades within the bowl radius. Small cutter, big performance: The powerful motors deliver the highest torque, even with challenging materials. Vibration-damping machine feet, the heavy, double-walled cutter lid, and the Plexiglas noise reduction cover all significantly reduce operational noise and emissions. The clearly arranged control panel with push buttons and the easily readable analog thermometer ensure efficient operation with a broad spectrum of applications. Machine features: • Completely stainless steel construction • Massive cast stainless steel bowl (Bowl capacity: 20L) • High-precision, maintenance-free cutting system • Stainless steel knife head with 6 blades • Tight cutting tolerances within the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter lid • Analog, clearly readable thermometer • 6 stainless steel knives, 7 stainless steel spacer rings, two bowls Drive & Controls: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox • Two speeds, independently switchable • Large, easy-to-use push buttons with easy-to-clean protective covers Technical specifications: • Bowl volume: 20L • Usable fine sausage emulsion capacity (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse: (A) 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base on castors • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Model: DMK 20 C2

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm Dcodpjykubisfx Aa Njg ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy Dodpfsykty Djx Aa Njcg TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: new, Year of construction: 2026, Single-needle chainstitch - 3-way feed (needle, presser foot, feed dog) - electromagnetic thread trimming - electropneumatic thread tension - electropneumatic backtacking and presser foot lift Dodpfsyzxcmex Aa Necg

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp Dcedpfx Aaexz R Nio Njg - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head Dcjdpfofg U Tqsx Aa Nog - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp Dcsdefg U Tpspfx Aa Neg - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table Dodpfx Aajfg U Tns Njcg - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Model: T150 Class Year of manufacture: 1993 Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Dcodpfoyx Nadex Aa Neg Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, without warranty or guarantee

Condition: new, A huge stock of spare parts for Poreba lathes: TR55, TR70, TR70B, TR80, TR90, TR90B, TR100B, TR115, TR135, TR135B, TCC125, TCA125, TCA 160, TCG125, TCG160, TCG200, TPC90, TRP110MN, TZG250, TNA90N and many more. - wheels, shafts and gears - toothed racks - lead screws with nuts - cross slide screws with nuts - electromagnetic clutches and brakes, brush holders - pumps, filters, motors - steady and movable rests - tailstock sleeve - tool post - lathe chuck Dodpfsv R Uauex Aa Necg Ask for more.

Condition: new, Clutches and brakes for Russian machine tools We offer for sale original electromagnetic and mechanical clutches, brakes and complete clutch assemblies for Russian machine tools such as: 1M63, 1M65, 1H65, 165, 1512, 1516, 1525, 1L532, RT-117, DIP-300 and many others. Our warehouse also offers spare parts such as: - electromagnetic clutches and brakes, clutch plates and brush holders; Dcodpev Sb Eyefx Aa Njg - complete electromagnetic and mechanical clutches for 1M63, 16K20, clutch shafts, friction plates and discs; - parts, clutches and brakes for 6P82T, 6P83 milling machines, etc. - pneumatic clutches for KD2128, KD2328 series presses, etc., made in Russia. Most of the above-mentioned items are available from stock, for the remaining ones we offer the fastest possible delivery times.

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. We cordially invite you to cooperate! Dcjdpfxjv Rpn Ts Aa Njg

Condition: new, New tool holders for the FAT Wrocław TUR-50, TUR-560, TUR-63, TUR-630, TUR-710, and TUD 40/50 lathes. Dcsdpfxowak Dto Aa Njg Spare parts for 4-way tool holders and many other mechanical parts and electromagnetic clutches for metalworking machines are also available for sale. The largest selection in Europe. We ship our parts worldwide.

Condition: new, We specialize in the sale of electromagnetic clutches and brakes and spare parts for them, i.e. clutch and brake plates and discs, brush holders, carrier baskets and others. We have the largest stationary warehouse in Europe of electromagnetic clutches and brakes from Stromag, ZF, Heid, Psp Pohony, Ema Dessau and many other brands. Thanks to our extensive experience, we help in the most difficult situations. To minimize possible production downtime, we ship some clutches within 24 hours of ordering. If you do not know the type of clutch you are looking for, write to us, together we will choose the best solution for your needs. Dedpev Tz Absfx Aa Necg From the Stromag brand we offer mainly: EKE 25, EKB 16, EDE 16 T, EKE / EDE 25 S, EKE / EDE 41 S, EKE / EDE /EFL100 T, EKE 161, EKE 40, EDE 41 T, EKE / EDE 64 S/T, EDE 250, EZE 2, EZE 5, EZE 10, EZE 16, EZE 25, EZE 40, EZE 63, EZE 100, EZF 40, clutch series ERD 2, ERD 5, ERD 10, ERD 16, ERD 16A, ERD 25, ERD 40, ERD 63, ERD 63/75 A EX

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Dsdpfxey Agm Ao Aa Necg

Condition: new, Year of construction: 2022, A mid range, industrial level sliding table panel saw for cutting sheet material or timber. Standard features include electric rise / fall / tilt of the saw group, table locking in any position and quick angle setting of the cross cut fence. Specification : Ex College A1 Condition - Unused Worktable dimensions 1000X560 mm Sliding table dimensions 3200X350 mm Max squaring capacity with scorer 3350 mm Cutting width max - blade to rip fence 1300 mm - manually adjusted - scale / pointer Tilting blade 0.45 degrees Max cutting height with blade at 90° d.350 mm 118 mm Max cutting height with blade at 45° (d.350 mm) 81 mm Max sawblade dia and bore size 350/30 mm Saw rotation speeds 3000/4600 RPM Dust extraction outlet on machine base d.100 mm Main sawblade motor 4kW (5.5HP) 50Hz Scoring motor 0.55kW (0.75HP) Max squaring with stops 3600 mm STANDARD EQUIPMENT: Carriage in anodised aluminium alloy sliding on high precision adjustable guides in hardened and ground steel Mitre gauge on sliding table 90° quick locking and single degree tilting scale plus reference at 10, 15, 22.5, 30 and, 45 degrees. Quick fence positioning at 90° 10° 15° 22.5° 30° 45° keeping without change the stop position in reference to the blade position. Anodised aluminium profiles Table locking in any position Main saw blade speed change accessed through the table Sliding table with push handle Eccentric workpiece clamp Motorised blade rise / fall Motorised sawblade tilting with electronic read out Electrical safety micro switches on access door Overload switch protection Key locking master witch Emergency stop Electromagnetic main motor brake Dcodpfoy Efz Rjx Aa Neg CE compliant overhead saw guard with extraction point Outfeed side extension table Complete with set of sawblades - 350dx30x3.2 Z60 and 120dx20x3.5 Z24

Condition: new, Year of construction: 2022, Ex College A1 Condition - Unused Worktable size 1200 x 700mm Useable spindle height 140mm Max spindle protrusion above the table 190mm Spindle rotation speeds 1300 / 2500 / 3500 / 5000 / 6000 / 8500 rpm. Max size of tool retractable under the table 320 x 50mm Main motor power 5.5hp Spindle tilting range -5 to +45 degrees 11/4" dia fixed spindle Adjustable fence max tool dia 250mm Dsdpfx Aaoy Efvho Njcg Mechanical readout and hand wheel for total fence displacement Mechanical readout and hand wheel adjustment for right infeed fence Dust extraction point on hood 120mm Dust extraction point on rear of machine frame 120mm Gravitational display for tilting angle of the spindle - adj by hand wheel Power rise / fall of spindle with decimal height readout Safety interlock on door Safety microswitch on fence assembly Key locking master switch Electromagnetic spindle brake LED light display for spindle speed setting Emergency stop button Pre arrangement (electrically) to accept a power feed unit (Feeder extra cost) Left and right table extensions 200mm total overall length with frontal retractable support bar