Used Ercolina Topbender Tb 60 T for sale (82,074)

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Njdpfx Asuf Rw Tekfjla Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: new, Year of construction: 2026, neu 2026 090209 Mai 2026, Zwischenverkauf Italien 7780 € 150.15 € 1 42 mm 400 mm 570 mm 1000 mm 80 kg 4 cm³ 42 x 3 mm 48 x 1,5 mm Njdpfx Ajwirzfjkfjla 42 x 4 mm 42 x 2 mm 42 x 2 mm 50 x 3 mm 54 x 2 mm 54 x 2 mm 60 x 2 mm 50 x 4 mm 30 mm 40x20 (liegend), 40x12 (s mm 260 mm 10 mm 3,3 U/min 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, Equipment: documentation/manual, Ercolina ECO 50 V1T is a professional and reliable pipe and profile bending machine. Compact, durable, and easy to operate, it is designed for precise bending of steel, stainless steel, aluminum tubes, as well as square and rectangular profiles. This unit is used but in good working condition, fully tested and ready for operation. ⚙️ Technical Specifications* Model: Ercolina ECO 50 V1T Max. pipe diameter (steel): up to Ø 50 mm Max. square profile: up to 40 × 40 × 3 mm Max. round hollow profile: up to Ø 48 × 3 mm Minimum bending radius: from ~80 mm (depending on tooling) Bending angle: up to 190° (programmable) Control: electronic (V1T version – with digital angle setting and memory) Motor power: approx. 1.5 – 2.2 kW Power supply: 400 V, 3-phase Dimensions: ~1100 × 600 × 1200 mm Weight: approx. 250 – 300 kg ✅ Key Features High-quality Italian brand ERCOLINA. Bending up to 190° with programmable radius. Compact and robust construction. Nodoxdnx Hopfx Akfsla Electronic angle setting with memory for fast and accurate production. Suitable for both one-off jobs and serial production. Used but tested and in good working condition. 🎯 Applications Pipe and profile production Railings, furniture, and metal structures Metalworking workshops Small and medium industrial companies

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 560551, conveyor belt length: 12,023 mm, conveyor belt width: 557 mm, conveyor belt speed: 10 mm/s, total length: 6,000 mm, total height: 1,000 mm, type of input current: DC, input voltage: 24 V, input frequency: 50 Hz, input current: 12 A, motor manufacturer: Montech, Equipment: documentation/manual, type plate available, For sale is a Montech conveyor belt, model TB40-600L, manufactured in 2023. The conveyor is in very good condition and is divisible along its length. Thanks to the aluminium profile system, the belt can be easily integrated into existing installations or reconfigured with minimal effort in case of process changes. Modular design! 2 units available Technical specifications: Model series: TB40 Nsdpeyzzy Uofx Akfjla Belt type: TB40-600L Year of manufacture: 2023 Belt specifications: Belt type: FNB-5E Belt width: 557 mm Belt length: 12,023 mm Performance data: Speed: 1.0 – 33.0 m/min Max. load: 200 N Pre-tension: 0.32% Transport and loading can be organised Europe-wide upon request, at additional cost. All prices are plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: used, functionality: fully functional, load capacity: 500 kg, total length: 780 mm, total width: 600 mm, total height: 1,900 mm, We are offering used roll containers for sale. TECHNICAL DATA - Manufacturer: Wanzl - Height: 1,900 mm - Width: 780 mm - Depth: 600 mm - 2 swivel castors and 2 fixed castors - Nestable - Lockable - Assembled - Condition: used PRICE - €150.00 net per unit - €178.50 gross per unit incl. VAT Available quantity: 20 units Tiered pricing per unit - 1 - 5 units: €150.00 net - 6 - 10 units: €142.50 net Nledpoy Epqasfx Akfoa - from 11 units: €135.00 net YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. The exact costs depend on the delivery location and scope of the shipment and can be provided upon request. PROJECT PLANNING Our sales team will be pleased to prepare a non-binding, customised offer according to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The quoted price refers to the unit price/net price, or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer attractive used items from various manufacturers/brands at favorable conditions. For any questions, please do not hesitate to contact us. Connect Four – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Year of construction: 2017, condition: used, This ICE-Trade industrial conveyor belt winding machine, model ITBW-2600-20, is being auctioned online in our industrial/machinery auction due to the site closure of ContiTech Transportsysteme. Nlsdpfx Aksyz R Uzefea

Condition: new, R10-R260 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm einphasig - 230 V drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Nodeyv I Tkjpfx Akfela Patented fast tool change system A single bending speed

Condition: excellent (used), mileage: 3,98,000 km, power: 441 kW (599.59 HP), first registration: 08/2010, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x6, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: beige, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2010, Equipment: retarder, = Additional Options and Equipment = - Leaf suspension - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Toolbox - PTO (Power Take-Off) = Notes = Nledpfx Akeuu Hb Iefsa Transmission: Manual transmission Number of gears: 16 Transmission model: ZT 440 Torque converter Color: Red Payload capacity: 375,000 kg Manufacturer: Mercedes Benz Type: Actros MP 3 / 4160 8x4 SLT VIN: WDB9301821L470692 First registration: 19-08-2010 Odometer: Approx. 398,000 km Engine: V8 / 600 HP / Euro 5 Transmission: Manual ZF Transmission / Low – High Range + Split 16-speed with clutch pedal 8x6x4 Axle 1: Steel suspension / 9,000 kg / Tyres 385/65R22.5 Axle 2: Air suspension / 8,000 kg / Tyres 385/65R22.5 Axle 3: Steel suspension / 13,000 kg / Hub reduction / Tyres 315/80R22.5 Axle 4: Steel suspension / 13,000 kg / Hub reduction / Tyres 315/80R22.5 GVW: 41,000 kg GCW: 5th Wheel Use / 250,000 kg Drawbar Use / 375,000 kg Additional information: Push front coupler Rear Rockinger RO56E coupler Jost JSK 38 fifth wheel mounted on sliding frame Toolboxes mounted behind the cab ZF Retarder ZF 440 Torque Converter PTO + hydraulic pump Counterweight box loaded with 15 tons of steel for extra rear axle pressure Tractor fuel tank capacity 1,000 ltr. = Further Information = Transmission Gearbox: Manual ZF Transmission / Low – High Range + Split 16-speed manual gearbox with clutch pedal Axle configuration Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Suspension: Leaf spring Rear axle 1: Tyre size: 385/65R22.5; Max. axle load: 8,000 kg; Hub reduction: Outer planetary axles; Suspension: Air suspension Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 13,000 kg; Hub reduction: Outer planetary axles; Suspension: Leaf spring Rear axle 3: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 13,000 kg; Hub reduction: Outer planetary axles; Suspension: Leaf spring Weights Kerb weight: 15,920 kg Payload: 250,000 kg Gross vehicle weight: 41,000 kg Condition Technical condition: Very good Optical condition: Very good Financial information Price: On request Further information Contact Stefan Schaapveld for more information.

Condition: used, mileage: 4,21,030 km, power: 345 kW (469.07 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 13,310 kg, maximum load weight: 18,690 kg, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,600 mm, next inspection (TÜV): 08/2026, brakes: VEB, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. I-Shift, company-owned, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), VEB brake, PTO (power take-off), vertical exhaust, differential lock, fog lights, work lights, leaf spring/air suspension, last axle liftable, trailer coupling with air and electrics, aluminum fuel tank, second axle with steered leading axle, underrun protection, roof hatch, green environmental badge. Nsdpfx Akeyaaiqofjla Wheelbase: 4,600 mm. Superstructure: 26t Hiab Multilift XR26S56 roll-off system for containers up to 6.5m; extendable underrun protection; I-Shift AT2612F transmission; disc brakes front and rear; ABS, EBS, FM driver comfort package, cruise control, Volvo Engine Brake+, rearview camera, LED daytime running lights, LED fog lights, additional off-road program, extra thermal insulation, air conditioning, under-engine oil sump guard, 8 mm frame thickness, PTO on gearbox. Roller height approx. 1,310 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: used, Year of construction: 2002, We have here a Buskro mailtable with feeder and vakuummodule with dryer available. Complete with a conveyor belt at the end. Nlsdpjyxmt Iefx Akfsa The mailtable has a vacuum shuttle feeder for infeed of documents. Inkjet which is installed works still but our advise is to change this for a new installation. Next to this there is a vacuum table with dryer installed. This system is complete with a conveyor belt at the end.

Condition: used, axle configuration: 3 axles, first registration: 03/2009, color: other, Year of construction: 2009, Empty weight: 7.340 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 12 mm Axle 3: left 8 mm right10 mm Nodpfxey A Rq Ej Akfela We have the possibility to stack trailers! 

Year of construction: 2024, condition: ready for operation (used), Offered is a continuous dryer/drying system: Drying units: Alraun infrared and hot air tunnel, transport system: Alraun railing belt TB70x300 (model 2233), infrared drying (model IR70x60/250C/2109): IR radiant heat, digital temperature controller A-Senco TR-85, adjustable upper alarm value (uPal) up to 300°C, hot air drying (model WL70x60/150C/480m³/h/2208): convection heat/hot air, air capacity: 480m³/h, temperature range: controlled heat up to approx. 150°C, transport system: Alraun railing belt TB70x300 (model 2233): drive: SEW-EURODRIVE gear motor, control: MOVITRAC®-LT frequency inverter infinitely variable speed control, dimensions X/Y approx. 700mm/3000mm, inspection possible by appointment. Nlodpfx Aksyzr Hrjfsa

Condition: excellent (used), functionality: fully functional, fuel type: diesel, output voltage: 10,000 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 6,750 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Deutz MWM, 5 units of power generator (power plant), total output: 6750 kVA. Completely overhauled in 2017, equipped with a new control system and advanced central management. The units were in use until 2025 as emergency backup power supply for a large data center and have always been maintained to the latest technical standards, with comprehensive servicing and upkeep. The system is in excellent condition. Engine: Deutz MWM TBD604 BV12, 200 operating hours, year built 1994. Generator: Siemens 1FC7 567, 10,000V, 50Hz, 78A, 1350 kVA. Generator control: DEIF, genset control, new version year 2016/17. Nljdpfjyzb R Tex Akfsa Central management: DEIF, load management, synchronization, fuel management, etc., year 2017. 10kV circuit breaker: Siemens. Accessories: silencers, radiators, pumps, etc.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 38900 € 742.99 € 64 mm 4000 mm 950 mm 1250 mm 850 kg 10 cm³ 64 x 3,3 mm 2" mm 60,3 x 2,2 mm 60 x 60 x 2 mm Nsdpfeynmtfjx Akfela 40 x 60 x 4 mm 60 x 40 x 3 mm 76 mm 200 mm 20 mm 210 ° 4.2 kW 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm

Condition: excellent (used), High-quality and very clean condition – well maintained automatic shrink wrapping line consisting of Lady Pack Auto 60 shrink wrapping machine and Madax shrink tunnel. This is a reliable industrial packaging solution suitable for a wide range of products including boxes, printed materials, cosmetics, food products, and general consumer goods. The machine offers automatic operation, making it ideal for efficient and consistent packaging in production environments. Main features • Manufacturer: Lady Pack (Italy) • Model: Auto 60 • Automatic shrink wrapping machine • Included shrink tunnel: Madax • Complete packaging line Nledpfx Asywpabjkfea • Industrial quality construction • Easy operation and maintenance Condition The machines are in good working condition. Previously used in production and well maintained. Logistics Machines are available for immediate pickup. Loading assistance available. Located in Finland. Additional information • Suitable for industrial and commercial packaging • Reliable and proven technology • Compact and efficient line. Higher capacity alternative to semi-automatic machines. Can be connected and tested before purchase. After all, very clean condition – well maintained and ready for production use. Keywords: Shrink wrapping machine Automatic shrink wrapper Lady Pack Shrink tunnel Packaging machine L sealer

Condition: used, mileage: 8,93,162 km, power: 412 kW (560.16 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 14,795 kg, maximum load weight: 11,205 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,600 mm, next inspection (TÜV): 12/2024, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro5, number of seats: 2, loading space length: 6,600 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, airbag, cabin, crane, cruise control, differential lock, navigation system, parking heater, power assisted steering, seat heater, trailer coupling, * German vehicle * Condition, see photos * Documentation available * Over €27,500 invested in truck and crane in the last 3 years * All invoices, e.g. swivel cylinder crane available * Crane HIAB 185K * 15 m hook height * 2 hydraulic outriggers * 5+6 control circuit * Grapple control Nodpfx Aovhqcyokfela * Crane extension 11m=1.5t - 8.20m=2.1t - 5.40m=3.3t - 4.50t=4t * High seat steering * Trailer coupling GVW 44000 kg * 29000 kg possible without technical modification * Scania V8 engine 15607 ccm * Air-suspended luxury cab * Air conditioning * Auxiliary heating * Leaf/air suspension + raise/lower * Roof hatch * E-window * Electric mirrors * Stereo CD * Bed * Refrigerator * Reversing camera * Telephone * CB radio * Comfort seat * Heated seats * Multifunction steering wheel * Alloy wheels * Storage compartment * Differential lock * Retarder * High bulkhead * Stone tongs * Working lights * ABS * Wheelbase 3600 mm + 1400 mm * Unladen weight 14,795 kg * Payload 11,205 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 24,000 rpm, overall weight: 545 kg, spindle motor power: 4,000 W, number of axes: 3, This 3-axis T-Rex Servo-0609 was manufactured in 2023. It features a CNC portal milling machine with a KinetiC-NC control system and PC software. The travel dimensions are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It includes a Hiteco 4.0 kW ATC spindle, air-cooled, with a 24,000 rpm and an automatic 4-fold tool changing station. Consider the opportunity to buy this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Additional equipment • Accessories: Electronic handwheel, Gigabit network switch (5 ports) Machine Benefits Technical Machine Benefits • Drive: servomotors with automatic lubrication • Clamping system: vacuum plate with t-slot rails • Tool change: 4-fold changing station (iso30), automatic (atc) • Tool holder: 6× sk30/er32 with nuts and tightening bolts • Single collet er32 (3. 175 mm, 0. 0006” concentricity) • Vacuum generation: side channel blower 2. 2 kw (520 mbar, 155 m³/h) • Transportation: box dimensions: 175 × 180 × 200 cm Njdpjx H A Nnofx Akfela Extra Information Machine still under power

Year of construction: 2011, condition: ready for operation (used), overall weight: 700 kg, This ERCOLINA Megabender TOP 030 die bending machine was manufactured in 2011. It features a maximum pipe diameter of 2" (60.3 mm) and a pipe slide length of 3,000 mm. With 30 programs and the capability to work with various materials, consider the opportunity to buy this ERCOLINA Megabender TOP 030 die bending machine. Contact us for further details. • Maximum pipe diameter: 2" gas pipe (60.3 mm) • Pipe slide length: 3,000 mm • Programs: 30 programs × 9 bending angles + correction angle • Material capability: • Stainless steel up to 2 mm • Steel up to 3 mm • Copper and aluminum up to 4 mm • Working hours: 150 h Additional equipment Nlsdpeyiavmsfx Akfea • Included mandrels: • 60.3 mm × 2 mm • 50 mm × 2 mm • 40 mm × 2 mm • 32 mm

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min Nledoxz Aygopfx Akfsa * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Nodoxbd U Espfx Akfsla

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Nledpfx Aoynlrajkfja This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: not inspected (used), functionality: unexamined, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery voltage: 48 V Njdpfxeytpqwo Akfsla Battery capacity: 625 Ah Battery condition: very good, measured at 51.76 V Battery type: 5PzS625 Dimensions & Weight Dimensions (L x W x H): 83 x 63 x 63 cm Weight: 1,500 kg EQUIPMENT Battery from former Linde service Last service valid until 10/2026 All dimensions are approximate. No liability is accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY upon receipt of email payment confirmation! Collection WITHOUT prior notification Monday to Friday 7:00–16:30. If the mast is too high for transport, it can be removed on request. In case of delayed collection, a storage fee of €20 per machine per day will apply (payment must be made before collection).

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Nodpfx Aoyr H A Iokfjla Inspection and demonstration possible by appointment.

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-185M with adjustable guide rails -Speed: frequency-controlled 38.3 - 51.1 m/min Nodpfx Akoyh Uvlefsla -Drive: Oriental Motor 120W, see photo of the nameplate -Voltage: 0-240V / 0-333Hz -Belt width: 155 mm -Conveyor length: 460 mm -Transport dimensions: 460/345/H200 mm -Weight: 11 kg

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Nlsdsyrihgepfx Akfoa Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg