Condition: good (used), Functionality: fully functional, Year of construction: 2001, operating hours: 2,249 h, machine/vehicle number: 07.05.11005345.0321, USED WIRTHEN MILLING MACHINE IN WOKRING CONDITION MODEL : W1000L SERIAL :07.05.11005345.0321 YERAR : 2001 Golhcjwv Apasdw Dsbp HOUR : 2249

Condition: used, Field of application: Construction Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Gbjlhcewy A Hajdw Dop Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: new, Functionality: fully functional, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 110 Production capacity: 100 m3 Mixer type: Twinshaft – 2 m3 Aggragate bunker: 4x20 m3 Cement weighing: 900 kg Geljwx Ixfjhcdw Debp Additives weighing: 40 kg Water weighing: 700 lt Cement silo is optional. COMPACT 110 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, power: 42 kW (57.10 HP), fuel type: diesel, color: green, Year of construction: 2008, operating hours: 8,101 h, Applicable material: Asphalt Empty weight: 5.900 kg Paving width: 2000 mm Auction item. Asphalt paver in working condition. Working width 2 000 mm. Gbslhewyu Amjcdw Dsp Sold with two extensions of 600 mm each.

Condition: used, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Gelhcdswy A Epjw Dsbp Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: new, Functionality: fully functional, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 120 Production capacity: 120 m3 Mixer type: Twinshaft – 3 m3 Aggragate bunker: 4x20 m3 Cement weighing: 1750 kg Additives weighing: 40 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 120 consist of: Gbjlhcdwjwx E Hts Dop • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, power: 92 kW (125.09 HP), fuel type: diesel, Year of construction: 2010, operating hours: 8,000 h, Field of application: Construction Gbolowyuw Rehcdw Dop Applicable material: Asphalt Empty weight: 7.800 kg Auction item. Asphalt milling machine in working condition. Sold with conveyor. Moto hours may be inaccurate.

Condition: used, Year of construction: 2024, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Golhcdewy A Eijw Dsbp Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Year of construction: 2006, Condition: used, Empty weight: 3.600 kg Gelewyuwdohcdw Djbp Auction item. Unit is in working condition.

Condition: used, Polygonmach drum mix or continuous type hot mix asphalt plant is a type of asphalt plant where the heating and mixing processes occur in a continuous manner within a rotating drum. The functions of a drum mix/continuous type Polygonmach asphalt plant include: Gelhcdwewy A D Ej Dobp Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are fed into the rotating drum, where they are heated and dried using hot gases. This process removes moisture from the aggregates. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before being introduced into the drum. Mixing: As the aggregates move through the drum, they come into contact with the hot asphalt binder, resulting in the mixing of the materials to produce hot mix asphalt. Storage and Loadout: The hot mix asphalt is temporarily stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Polygonmach drum mix/continuous type asphalt plants are used in various applications, including road construction, highway projects, airport runways, and large-scale paving projects. Options: continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 40 t/h(24 lb/s)

Condition: used, fuel type: electric, Year of construction: 2021, GVW: 60.000 kg Productivity: 320 tph Auction item. Gslhcdwjwyufbj Debp Mobile soil mixing plant in working condition. The plant is designed to produce the base of the roadway, as well as a number of other related works. Productivity 320 t/h.

Condition: used, Polygonmach mobile or portable hot mix asphalt plant is a type of asphalt plant that is designed to be easily transported and set up at different job sites. Unlike stationary plantsPolygonmach mobile plants can be quickly assembled, disassembled, and moved to different locations as needed. Capacity vary from 40 to 200 tph on design based. Gbslhcdwswy A Dxe Dsp The functions of Polygonmach mobile/portable asphalt plant are similar to those of a stationary plant and include: Aggregate Storage and Handling: Polygonmach Mobile plants have storage bins or silos to store aggregates of different sizes. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: Polygonmach Mobile plants have storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored temporarily in storage silos or bins until it is ready for loadout onto trucks for transportation to the construction site. Options: mobile, continuous Capacity: Max.: 200 t/h(122 lb/s)Min.: 40 t/h(24 lb/s)

Year of construction: 2009, Condition: used, Empty weight: 520 kg Auction item. Vibrating plate compactor in working condition. Golhcdswyua Ejw Dobp Sold as shown in the photos. Przedmiot aukcji. Zagęszczarka sprawna. Sprzedawana taka jak na zdjęciach.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating Gbjlhcdjwy Ayaew Dsp - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, color: orange, Field of application: Construction Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ h quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Gslewy Ax Nshcdw Djbp Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and...

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 Gbjlswy Ax Aohcdw Dep FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. Gjlhcdswy Axvow Debp • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: new, Field of application: Construction Empty weight: 120.000 kg Cargo space capacity: 160.000 l Productivity: 240 tph STANDARD CONDITIONS The plant is designed for a production of, 160 t/h of road mix with a finished product at initial moisture 4% and of 160 C, under the following standard conditions: •Aggregates temperature at dryer inlet 10 C •Altitude sea level •Average feed aggregates density 1.650 kg/m3 •Heavy-oil No: 6 calorific value ≥ 9.200 kCal/kg •Heavy-oil No: 4 calorific value ≥ 9.700 kCal/kg •Diesel-oil calorific value ≥ 10.200 kCal/kg •Natural gas calorific value ≥ 7.600 kCal/kg •Hot aggregates temperature increase 160 K •Mixture residual moisture content 0,3 % •Max. aggregates size 40 mm •Material passing screen 3 mm 35 % Gjlhcdwjwy Axie Debp •Material not porous and hygroscopic with normal shape •Production tolerance rate according to ambient and parameterconditions ± 4 % COLD AGGREGATE BUNKERS •There shall be 4 cold aggregate bunkers made of 5 mm St 37 sheet, they shall be approximately20 m3 and each one shall be produced separately.•There shall be 800 mm high upper additions made of 6 mm sheet on the bunkers to preventmaterial overflow.•Material cast of the bunkers shall be made with group.•Material cast flow rate of each bunker shall be frequency controlled (speed controlled) dozingone by one if desired or adjustable from computer screen.•The flow rate of the material flowing from bunkers shall be adjustable from the manual gate to beplaced on each bunker.•In case of running out of the aggregate flowing from the bunkers, there shall be a warning systemand a warning sign shall be displayed on the computer screen to warn the operator.•Vibrator engine controlled from computer screen shall be placed to relieve material flow andprevent blockage in the bunkers with thin materials.•A conveyor belt system shall be installed under each bunker to ensure material flow.•Each bunker shall be equipped with modular gratings consisting of 10x50 metal sheets 10mmrounds.•Silo loading width shall be 3000x2400 mm.•There shall be rope emergency stop system for emergencies.•Possible failures on belts shall be displayed on the computer screen. 2.SUB-BUNKER COLD AGGREGATE COLLECTOR BELT •Horizontal belt shall convey the material taken from each bunker separately in a controlledmanner to the dryer sloped belt and be able to convey material to 160 t/h capacity plant.•Rubber belt shall be 10 mm thick; 800 mm wide 4 layered court fabric and have 4 EP 125qualities.•Belt Start/Stop operation shall be performed from computer screen. When the materials in thebunker are desired to be discharged at the end of the season, the belt may be run reversewithout running the other units.•Horizontal belt chassis shall be made of steel construction material by which the belt can operatesmooth and produced with belt tensioning system. •The belt shall be with separator system from each end. •The driving drum shall be rubber coated and it shall be 1 degree angle lathed. •There shall be rope emergency stop system for emergencies •Possible failures on belts shall be displayed on the computer screen. •The belt shall be 7,5 kw d/min red./motor driven, driving drum shall be rubber coated, the beltshall be able to be driven triple roller chassis. The bearings in the roller shall be enclosed type...

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation Gbslhcdswy Awxsw Djp • Turn-key ready to use

Condition: new, Field of application: Construction Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 Gslhcjwy Aw Esdw Dobp 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET

Condition: new, Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe Gjljwy Av Iehcdw Dsbp - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: new, Empty weight: 18.000 kg Warranty: 24 months Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. Gjlhcjwy Arpjdw Dobp - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit pipe. 6. ELECTRIC AND CONTROL SYSTEM - Air - Conditioned operator station...

Condition: new, Empty weight: 290.000 kg Cargo space capacity: 3.000.000 l Productivity: 200 tph 1.1 COLD AGGREGATE FFEDING CHASSIS 4 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 0 2.9 Filler stock silo 25 M3 1 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 1 Set 3.5 Filler Screw Conveyor 1 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET Golswy Aq Sohcdw Djbp 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.500.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET

Condition: new, power: 450 kW (611.83 HP), fuel type: gas, color: blue, Year of construction: 2021, Year of manufacture: 2021 Field of application: Construction Empty weight: 215.000 kg Make of engine: Perkins Cargo space capacity: 4.000 l Productivity: 240 tph 1.1 COLD AGGREGATE FFEDING CHASSIS 5 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 1 2.9 Filler stock silo 25 M3 1 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 1 Set 3.5 Filler Screw Conveyor 1 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 40 Ton capacity boiling oil heating isolation bitumen tank 4 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAl GENERATOR CHASSIS GROUP 5.1 1.500.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET Gboljwy Aq Ejhcdw Dsp

Condition: new, color: blue, Year of construction: 2022, Field of application: Construction Empty weight: 300.000 kg Cargo space capacity: 3.000.000 l Warranty: 24 months Productivity: 240 tph Gelhcewy Aqrjdw Dobp 1.1 COLD AGGREGATE FFEDING CHASSIS 5 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 1 2.9 Filler stock silo 25 M3 1 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 1 Set 3.5 Filler Screw Conveyor 1 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 40 Ton capacity boiling oil heating isolation bitumen tank 4 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.500.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET