Used Ermak Power Bend Pro 26.100 for sale (42,508)

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Redpfx Ajd E A I Ijgujcb Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on Rjdpfx Agjdz Srajuscb - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF Rcodpedz Srbofx Aguob MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: used, Year of construction: 1976, Profile bending machine Rodjytn E Tepfx Agujcb IRLE - B 160 HH Technical data on photo

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement 4/380 kW weight of the machine ca. 1645 kg required space 1500 x 1000 x 1400 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 80 Upper shaft diameter: Ø 80 mm Bottom shaft diameter: Ø 70 mm Roll diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1500 x 1000 x 1400 mm Weight: 1645 kg Standard accessories Steel construction welded frame 3 Rolls are powered Hardened and ground shafts made of high tensile special steel Rolls are hardened and ground Horizontal and vertical working position Hardened standard rolls Mobile control panel 3 Axis mechanical lateral angle guide rolls Brake motor equipped for the precision bending Digital Read-Outs (2pcs) Optional Equipments Pipe, tube and profile bending rolls Rjdpfsyk Im Eox Aguocb Hydraulic lateral guide rolls (2 axis) Automation with NC control

Condition: excellent (used), functionality: fully functional, TAURING PROFILE BENDING MACHINE DIAMETER 40 Rsdpfxjyv Hrxj Aguscb MODEL: ALFA 40 R USED MACHINE INTERNAL CODE: SVR 399

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Rjdpfx Agou Snm Ioujcb Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: excellent (used), Year of construction: 1994, Technical Data: - 2 hydraulically adjustable rolls - 3 driven rolls - Main motor power: 5.5 kW - Machine can operate horizontally or vertically - Drive shaft diameter: 105 mm - Standard attachment roll diameter: 275 mm - Working speed: 0 – 7 m/min - Digital display Bending Capacities: - Flat steel: 100 x 25 mm - Angle steel: min. 100 x 100 x 12 mm - T-profile: min. 120 x 120 x 13 mm - Round steel: 70 mm - Round pipes: 100 mm Rcsdpfx Ageyurwvouob - Square tubes: 90 x 90 x 5 mm - CE marking - Dimensions (L x W x H): approx. 1600 x 1500 x 1500 mm - Weight: approx. 3 t Condition: Very good condition Accessories: Various tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology, and wear consistent with its age; used machines are sold without any guarantee.

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop Rcedjucqquspfx Aguob - Documentation - 400 V

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Rcsdpfx Agsytyf Seueb Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Year of construction: 2019, condition: used, functionality: fully functional, Profile and tube bending machine. Sets of rolls for pipes 1/2", 3/4" and 1". Rcedpfxoymmd Io Agujb

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Sahindler - Scantool profile bending machine Model PV 60 NC Year 2019 - New / Demo Roll diameter : 215 mm. Rjdpfx Ajytb U Uogujcb Capacity flat iron : 120 x 25 mm. Capacity flat iron on edge : 80 x 20 mm. Capacity angle iron: 70 x 7 mm. NC control 1 set profile bending rolls Hydraulic top roll movement Bending support Footpedal

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Rcedpfsxc N Rhox Agusb Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Redpfx Agoxh D Nveujcb Standard bending set Weight: approx. 200 kg CE certification Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Rodpfx Aou Snlksguocb Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE Rcsdjxackcspfx Agueb SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine Rsdpfx Aod Naw Ajguscb -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm -Bore: Ø 49 mm -Quantity: 2 rolls available Price: complete -Dimensions: Ø 200 x 81 mm -Weight: 11 kg

Condition: new, functionality: fully functional, Year of construction: 2026, New three rolls angle roll Roundo R3 with tools, digital readout and remote control. Rcjdpfxed N Ahdo Aguob

Condition: new, Year of construction: 2026, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - Lower two rollers are moved hydraulically - Three rollers driven - Hydraulically adjustable guide rollers - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel Rcsdpfx Asg Sr I Usgueb - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, rotational speed (max.): 50 rpm, - Ring bending machine – Shaft diameter 50 mm – The top roller is moved hydraulically – Digital display – Can be used horizontally/vertically – Foot control Rsdpfslp Ryhex Aguocb – Emergency stop – Documentation – 400 V

Condition: new, Year of construction: 2025, shaft diameter: 30 mm, - Shaft diameter: 30 mm Rcjdpsxgb A Dsfx Agueb - Rotates both clockwise and counterclockwise - Usable horizontally and vertically - Foot operation - Emergency stop - Documentation - 400 V

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Rcedpfx Agjpxmausuob Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm Rcedpoxrd Rnsfx Agusb • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: new, Ring-profile bending machine Akyapak APK 81 I-steel - upright 100 x 20 (d 2100) mm raw diameter max. 100 x 3 (d 3000) mm angle steel 80x80x8 (d 2000) mm square steel 50 x 25 x 2 (d 600) mm I - steel - flat 120 x 30 (d 600) max.140b mm solid material - diameter 60,0 (d 1000) mm tool holder 80,0 mm Speed 4,2 m/min. Weight 1.600 kg Dimension L-W-H 1240 x 1375 x 1540 mm Equipment: hydr. roller drive planetary gear feed of the 2 lower rollers for extra small bending radii hardened tool holder (42CrMo4) standard roll set, hardened Rodpfxod R Iquo Aguecb mobile control panel 3 driven rolls digital display machine can be used horizontally and vertically CE-sign / declaration of conformity Operating instructions in German

Condition: new, Akyapak Akbend ring APK 35 profile bending machine Description •. base • horizontal and vertical working • Foot switch • Standard rolls (shared) • 2 driven rollers • CE mark / conformity declaration • User manual in German Technical details • I - steel - flat: 120 x 15 (d 750) mm • I steel upright: 60 x 10 (800 d) mm • Angle steel: 50 x 5 (1200 d) mm • Round material: 35.0 (800 d) mm • Max size: 70 x 2 (1200 d) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m / min • Diameter of the roller - top: 155 mm • Bore: 50.0 mm • Total power: 1,5 kW • Weight: 320 kg • Dimensions L W H: 730 x 830 x 1350 mm Rcjdpfxod Er S Io Agusb