Profile bending machine

PARMIGIANI MERCURY PROFILE ROLL

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Gbjdowlkwwjpfx Ah Hog

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. Gbjdpoxddvnsfx Ah Hog 125 kg auxiliary crane on spindle box.

Condition: used, functionality: fully functional, Year of construction: 1989, roller (top) diameter: 200 mm, side roll diameter: 150 mm, sheet thickness (max.): 6 mm, working length: 3,000 mm, Working length 3000 mm Bending capacity 6 mm Bending capacity 4 mm Gsdpfeuzm Ayjx Ah Hjbg Top roller diameter 200 mm Diameter of side rollers 150 mm Hydr. folding bearing

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: welded steel construction 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Optional equipment: Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm Gbjdpfx Ajr Ddureh Hsg working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Gbjdjkvnumjpfx Ah Hog Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm Gbsdpfx Ahomdqllj Hog - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation - separate control panel

Condition: new, - Ring bending machine - Shaft diameter 60 mm - The two lower rollers are hydraulically driven - Three rollers are driven Gbjdpfx Ajgg N Amoh Heg - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm Gbedpfx Aefw Ah Rsh Hjg

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 - Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm Gbjdpewrcq Nofx Ah Heg - Weight approx. 250 kg

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Gjdovi Hryopfx Ah Hsbg Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .