Used Femi Ng 105 for sale (10,329)

Condition: used, Year of construction: 2024, front tire size: 710/60R38, rear tire size: 900/65R46, Equipment: compressed air brake, Section Control Load weight rear wheels 2x 1,000kg Fendt Stability / Control Tire pressure control system Fendt VarioGrip Reverse fan Cooling box Hood camera / Infotainment package Lane guidance RTK Novatel TI Headland Contour Assistant / Agronomy Basi Chsdpfx Apstt I Nyetsb

Condition: used, Year of construction: 2022, front tire size: 710/60R38, rear tire size: 900/65R46, Equipment: front power take-off, VarioGrip / tire pressure regulation system Chedpfx Aeucqcqjptsb

Condition: new, Incl. parabolic suspension / spare wheel / full-width ramp / lockable coupling head / spiral cable Technical data: • Brand: Ifor Williams • Model: GX105 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle Cedpfxex S Ri Ts Aptshb • First registration: none • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 303 x 157 x 30 cm • External dimensions (LxWxH): 502 x 209 x 162 cm • Loading height (floor): 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 664 kg • Payload: 2,836 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 155/70R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced side panels, covered with tread plate and walkable • 24 mm anti-slip, waterproof phenolic plywood floor • Extremely robust, fully welded tubular steel frame • Frame fully hot-dip galvanised in immersion bath • 2 individual ramps (skids), standing on shaft, 120 cm high • Ultra-low chassis for minimal loading angle • Excavator bucket rest at the front • Spare wheel mounted under excavator bucket rest • 6 lashing rings mounted in the sideboard • 4 foldable lashing eyes (plate anchors) mounted in the floor • KNOTT leaf spring axles for maximum heavy-duty use • Automatic reverse mechanism • KNOTT overrun hitch and parking brake • Lockable coupling head • Very robust, bolted, reinforced V-drawbar • 13-pin plug • Removable plug cable from front wall • Reversing light • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in the rear frame • Heavy-duty centre support wheel Optional equipment – available on request: Various accessories can be retrofitted to this trailer as shown in the pictures, e.g.: - 4 foldable lashing eyes (plate anchors) mounted in the floor New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be shipped in advance or export plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been specialist dealers & repair workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Errors, mistakes, and prior sale excepted -

Condition: used, empty load weight: 3,880 kg, maximum load weight: 6,120 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 10/2019, loading space length: 7,090 mm, loading space width: 2,480 mm, loading space height: 2,430 mm, loading space volume: 42 m³, suspension: air, tire size: 235/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/70 R 17,5, rear tire size: 235/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, tail-lift, Front with portal doors for through-loading with drive-over plate, Dautel tail lift, 4 cylinders, aluminum platform 1,800 mm long, incl. 2 roll-off safety devices, batteries and charging cable, 2 times combination lashing rails, , Vehicle is sold on commission, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Csdpfxezymm Ie Aptohb

Condition: used, empty load weight: 3,050 kg, maximum load weight: 6,900 kg, overall weight: 9,950 kg, axle configuration: 2 axles, first registration: 04/2019, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, loading space volume: 44 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 14 x lashing eyes, 2 rows of lashing rails, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Chsdpozymmzefx Aptsb

Condition: new, empty load weight: 2,950 kg, maximum load weight: 7,050 kg, overall weight: 10,000 kg, axle configuration: 2 axles, loading space length: 7,080 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 44 m³, suspension: air, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, BPW axles, front loading with short ramp, 2 rows of combination lashing rails, 7 pairs of lashing eyes in the floor, load securing according to 12642 Code XL, 1 interior light, side wall thickness approx. 17 mm, , Rental price from 650 ¤ per month, , --  Misprints, errors and changes excepted, Sample images --, More details at: !, More details: ! Chedpfx Apozx Tbijtjb

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 39 m³, suspension: air, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, front for through-loading with short drive-over flap, 2 x rows of combination lashing rails, 6 pairs of lashing eyes in the floor, load securing to 12642 Code XL, 1 x interior light, , Rental price on request, , Also available in 7.28 m loading area length, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Csdezx Tb Aepfx Aptshb

Condition: good (used), Year of construction: 2011, operating hours: 23,105 h, functionality: fully functional, Soon available Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: as of 09/26: 23,105 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-strand horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Cedpfxezyl Htj Aptohb Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. The conveyor belt shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: new, spindle moulder with tillable spindle Codpfxscuwpto Aptehb guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Codpfx Apszyakmotjhb

Condition: used, empty load weight: 3,000 kg, maximum load weight: 7,000 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 03/2025, next inspection (TÜV): 03/2027, loading space length: 7,080 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 44 m³, suspension: air, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, BPW axles, with a short, through-loading ramp at the front, 2 x sets of combination lashing rails, 7 pairs of lashing eyes in the floor, 1 x interior light. Rental price starting from €600 per month. Cjdpfxezxnl Ns Aptjhb -- Printing errors, mistakes, and changes reserved. Sample images --. More details can be found at: !

Condition: used, Year of construction: 1993, COMI/RIGO 0599 inner liner thermoforming machine, SL200x90 NG DX Machine Specifications Forming & Tool Dimensions Maximum mold base dimensions: 2000 × 900 mm Minimum mold base dimensions: 800 × 480 mm Maximum frame interior dimensions: 2000 × 900 mm Maximum mold height: 800 mm Maximum molded part height: 550 mm Maximum sheet stack height: 1000 mm Maximum sheet support stack height: 180 mm Heating System Cedpfx Aszumuueptshb Upper heating power: 89 kW Lower heating power: 78 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Motors & Drives Oil pump motor power: 30 kW Vacuum pump motor power: 12 kW (3 × 4 kW) Sheet transport motor power: 1.6 kW Transport regulation motor power: 1.1 kW Sheet moving motor power: 0.25 kW Fan motor power: 0.50 kW (2 × 0.25 kW) Pyrometer motor power: 0.18 kW Discharge transfer motor power: 0.70 kW Single-blade motor power: 5 kW Cooling & Utilities Chiller power: 78 kW Auxiliary equipment maximum consumption: 3.87 kW Electrical Requirements Maximum installed power: 399 kW Vacuum System Vacuum pump capacity: 570 m³/h (3 × 190 m³/h) Vacuum tank capacity: 4,000 L (2,000 + 2,000 L) Water Requirements Water inlet temperature: 12-20 °C Water inlet pressure: 2-3 bar Closed-circuit water maximum flow rate: 130 L/min Pneumatic & Hydraulic Requirements Pneumatic operating pressure: 6 kg/cm² Hydraulic operating pressure (min/max): 110 / 140 kg/cm² Mechanical Characteristics Upper die clamping force: 9,000 kg Lower die clamping force: 9,000 kg Oil quantity for operation: 480 L Air consumption (movement = 700, cooling = 800): 1,500 N litres/cycle Machine weight: 25,000 kg (25 tonnes)

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Water inlet pressure: > 0.1 kPa Cedpfx Ajzumrmoptohb Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Thanks to its modular structure, our Metro 78/105 folder-gluer is a "platform" machine for the realization of specialized jobs, without the commitment and complexity of dedicated machinery. In other words, Metro grows with your jobs. Its digital management system allows it to interface with the other elements and attachments of the system, and the product path can be controlled from the console. Chedpfx Apjzwmduotsb Applications include presentation folders, multimedia packaging, a variety of envelopes, boxes, calendars, cases, and more.

Condition: good (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, 30 BT-40 tool magazines. Spindle and axis movements are very quiet. Fully functional, regularly used and maintained. Complete documentation is available! Chodpeyr D Axsfx Aptsb For more information and videos, please contact me privately.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,000 h, machine/vehicle number: 66642, Coarse material screening plant 6 m³ feed hopper with steel plate belt feeder CAT C4.4 (3054) with 75 kW Codsznl Hispfx Aptjhb Double-deck screen box: 3,660 x 1,370 mm Feed capacity: up to 300 t/h Transport weight: approx. 23,000 kg including various spare screen decks

Condition: good (used), Year of construction: 2021, functionality: fully functional, cooling capacity: 90.3 kW (122.77 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,375 kg, input voltage: 400 V, total width: 1,550 mm, total length: 2,250 mm, total height: 2,460 mm, warranty duration: 6 months, heating capacity: 105 kW (142.76 HP), Aircooled chiller/Heat pump GALLETTI EVI092HS2ASP01 90.3 kW/105 kW Cooling capacity: 90.3 kW / 25.68 tons (12/7 — 35°C) Heating capacity: 105 kW / 29.86 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module. Economizer. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH146K1P-TWD-477 (scroll, soft starter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Chsdpfozwt S Eex Aptjb Hydraulic module: 1 pcs. water pump EBARA 3M4E/E 40-160/0,55R SCA IE2 (Frequency inverter), expansion vessel. Dimensions: 2.25x1.55x2.46 m. Weight: 1375 kg. Working hours: 2034/1846 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Bandsaw width 130mm Chjdpfxozwfyns Aptob Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: used, mileage: 16,49,805 km, power: 375 kW (509.86 HP), first registration: 08/2007, fuel type: diesel, overall weight: 18,000 kg, emission class: euro5, REAR TIRE – AUTOMATIC TRANSMISSION WITH RETARDER – HYDRAULIC SYSTEM Chsdpfx Apjy Rvahotob For further information.

Condition: used, Year of construction: 2002, turning diameter 290 mm turning length 850 mm swing diameter over bed slide 600 mm Control Siemens SINUMERIK 840D total power requirement 58 kW Chodpfezrzxcsx Aptob Automation: Portal with 2 belts Number of turrets: 3 Spindle: Yes # Stepping wheel: No X-axis (transverse) travel: approx. 220 mm Z-axis (longitudinal) travel: approx. 950 mm Feed rate: approx. 25 m/min (x/y) Rapid traverse: approx. 25 m/min

Condition: used, Year of construction: 2000, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 290 mm Control Siemens 840D Chsdpfx Apoydfpdsteb Turning length: 850 mm Rotation diameter over table: 600 mm x-axis: 220 mm z-axis: 950 mm Control: Siemens 840D Speeds: 0-4500 rpm Tool revolver: 2 pieces Spindle bore: 65 mm Rotation diameter: 290 mm Feed rate x/y: 25 m/min Rapid traverse x/z: 25 m/min Working height: 1200 mm

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Chjdozu T Smopfx Apteb Technical data without guarantee!

Condition: used, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 116831, input voltage: 230 V, type of input current: AC, plate width: 850 mm, plate length: 1,050 mm, input frequency: 50 Hz, For sale is a Glunz & Jensen Unigraph Quartz Stacker Mk III 85/105 SP for the automatic transport and stacking of CTP/offset printing plates. Chjdpfx Ajzxf Dpsptsb Technical specifications: Manufacturer: Glunz & Jensen Model: Stacker Mk III 85/105 SP Machine type: PS 85/100 SP Year of manufacture: 01/2005 Power supply: 100/115/200/230 V Frequency: 50/60 Hz Single-phase Conveyor belts/round belts Tilting/stacking unit Sensor control Speed control for conveyor and tilting unit Condition: Used, well-maintained condition. Optical condition and scope of delivery can be seen in the original images.

Condition: used, turning diameter over bed / mm turning length / mm Cedpfozu A T Tex Aptohb centre height / mm

Condition: good (used), mileage: 1,12,917 km, first registration: 06/2020, fuel type: diesel, tire size: 215/65R15, axle configuration: 4x2, wheelbase: 3,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,530 mm, total width: 2,020 mm, total height: 2,450 mm, loading space length: 3,040 mm, loading space width: 1,780 mm, loading space height: 1,880 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Codpfx Aszvmtgoptjhb Configuration: 4x2, trailer coupling, cab type: single cab, cruise control, air conditioning, number of airbags: 1, parking assist: front and rear, electric mirrors, partition, radio/cassette, color: white, heated mirrors, lighting type: halogen lamp, Bluetooth, fuel: diesel, Euro: 6, drive technology: timing belt, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: extended and raised, side wall paneling, roof rack: none, side doors: 1, rear closure: double door, central locking, seats: 3, seat arrangement: 1+2, seat upholstery: fabric, seat adjustment: manual, L2H2, air conditioning, tow bar, spare wheel, tire type: all-season tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 215/65R15 Brakes: disc brakes Axle 1: Suspension: coil spring suspension Axle 2: Suspension: leaf spring suspension Functional Loading area height: 56 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €226 per month (delivery van, 72 months); ask for further information and conditions.