Used Veneer saws for sale (37)

Condition: good (used), Scheer Veneer Saw Cutting length approx. 3000 mm Handwheel tensioning Chain feed Bwjlq Uiewf Uztjwcsl L x W x H approx. 4200 x 800 x 1400 mm All information is subject to change without notice.

Condition: reconditioned (used), Veneer saw / fine-cutting saw Belqjv D I Uxj Uiwcswl Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 1975, used hole line drilling machine Model Scheer DB 20 Bwelq Uiwjri R Hajcol table size 1400 x 630 mm 1 drill beam a 21-spindle, 32 mm pitch height adjustment 40-100 mm Spindle distance max 640 mm, Working length 700 mm per cycle by moving the workpieces max. 2656 mm throat 550 mm Motor 1.8 KW 1 stop rail with immersion stops Weight approx. 240 kg

Condition: excellent (used), Year of construction: 1978, used, good condition Make Mayer Type FSK Year of manufacture 1978 Motor 2.2 kW Cutting length 3000 mm Saw blade diameter approx. 170 mm Belqovlzras Uiwcjwl Pneumatic tension Parallel stop Front support table Rear support table Extraction channel Pneumatic maintenance unit Extraction connection D 100 mm Space requirement approx. LxWxH mm 3900 x 1200 x 1300 Weight approx. 450 kg Total connected load approx. 2.2 kW Chassis Location: From warehouse 54634 Bitburg Handed over in the current condition as viewed - free loading -

Condition: good (used), Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw Belqeb A Hnhj Uiwcewl -Cutting length: 3000 mm -with suction

Condition: used, Year of construction: 2024, Functionality: fully functional, load capacity: 3,500 kg, net weight: 305 kg, Rotator Load center of gravity: 500 Belq Uowfauljiwcjwl ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good

Condition: good (used), Year of construction: 1979, Veneer saw w. planing unit cutting length 3100 mm Bwelq Uep T T Ukjiwcol with beautiful rear fence

Condition: excellent (used), Veneer saw Front support table Pneumatic pressure beam control Rear table consoles with angle stop Suction channel Cutting length 4200 mm Cutting height approx. 50 mm Motor power 3.0 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 5800 x 1350 x 1200 mm Advise used machines: - Technical data without obligation, mistake and intermediate sale reserve. - Price is considered ex-location price - All articles or machines are bought as seen without any entitlement on warranty. - It is left to the choice of the buyer to view the machines before at its location. - Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! Bwjlq Uisvbzpkjwcjl - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 2006, FH 2 jointing saw and fine-cutting saw with jointing unit (planing unit) and veneer stop table Robust mechanical engineering by Mayer A video of the machine in operation can be sent upon request. For tear-free and joint-tight cutting of veneer, including thick-cut veneer Maximum cutting length: 3100 mm The saw unit and jointing unit are combined in a single unit, so only one unit needs to be moved. Easy-to-guide saw unit, runs on precise linear guides. Rear support table with full-length finger stop, adjustable from 2 - 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8 kW, milling unit 1.0 kW Belq Uiswamnzewcjwl The motors can be conveniently switched on using the handle, meaning they only run when needed. Carbide-tipped fine-cutting blade, sharpened Z4 planer head, equipped with new knives and spare knives included Practical front veneer support, extendable for planing unit Left-hand angle stop 100mm extraction connection with extraction duct Emergency stop switch CE mark Operating instructions On-board tool kit Original paint, only a few areas touched up Machine dimensions approx. 4350 x 1700 x 1400mm (LxWxH) Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "Other offers from this supplier."

Condition: excellent (used), Year of construction: 1984, used, top condition, hardly used Make Scheer Dqmmnt Type FM5 - 3100 Year of manufacture 1984 Mach. No. 41134 Motor 1.8 kW Saw feed / handwheel Cutting length 3100 mm Saw blade diameter: 180 mm Pneumatic tension Rear support table Parallel stop Chassis Bwelq Uiwovld I Docsl Space requirement approx. 4200 mm x 1200 mm x 1200 mm Storage location 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, Year of construction: 1989, Fine-cutting and grooving machine Saw and planing unit Cutting length: 4200 mm Belq Uiwswazxhscewl Saw motor: 2.2 kW Saw blade diameter: 180 - 200 mm Planing unit motor: 1.8 kW Joining head diameter: 85 mm, 50 mm high Coupable Extraction connection diameter: 100 mm All information is provided without guarantee. Sold as is without warranty.

Condition: used, Functionality: fully functional, load capacity: 8,000 kg, construction width: 1,500 mm, net weight: 900 kg, Rotating device Load centre of gravity: 600 ISO class: ISO class 4 = 5,000 - 10,000 kg Bslsu Dz Txsq Uiwcjwl Condition: Ready for use and fully functional Technical condition: very good Description: 360° endless rotation in both directions Assembly Fork carriage width: FEM4 / 1200 mm Fork carriage width: 1500 mm

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Bslq Uiweq Rb Irecjwl

Condition: used, machine/vehicle number: 199710, max. Schnittlänge : 3000 mm Bwolqsv U Hahe Uiwcol max. Schnitthöhe : 45 mm Sägeblattdurchmesser : 160 mm Spannbalkenbewegung : per Handrad Bewegung Sägewagen : manuell Maschinentyp : fahrbar Motorleistung : 1,8 kW

Condition: used, Functionality: fully functional, Year of construction: 2025, load capacity: 1,500 kg, construction width: 1,200 mm, Rotator Belq Usu D N Rfsiwcewl Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: New Description: Rotator 205 degrees, for complete emptying of all containers, load capacity 1500 kg, fixed/folding support arm, incl. hoses & quick couplings available from stock

Condition: used, Veneer scissors Bolq Uiov Ulpbowcswl Hydraulic Casolin 3100mm Working wide 3100mm 4500x1100x1900mm, Weight 2000kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2025, - Saw unit 2.2 kW (3 HP) - Milling unit 1,1 kW - Sawing length 3700 mm Bolq Uiwj Azdijcjwl - Double high-grade LM-linear guides - Mechanic axial saw blade adjustment 0 – 2 mm infinitely variable - Power supply in cable duct with plastic link track - Cutting height 45 mm - Safety equipment

Condition: used, Year of construction: 2020, Functionality: fully functional, load capacity: 2,000 kg, construction width: 980 mm, net weight: 385 kg, Rotating device Bwjlq Uev Dng Ijiwcol Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Scheer joining and fine-cutting machine, Bslq Uiwov Rvpkocewl built in 1990, machine number 83464, type FM 8- 3100

Condition: good (used), Year of construction: 1981, Functionality: fully functional, - pneumatic clamping beam - cutting length 3000 mm - front support table Belq Uiwev A U Ivjcjwl - rear unloading table with stop - motor 2.2 kW

Condition: used, Year of construction: 1985, with großer cut length 3500 mmused, good conditionmanufactured by Mayertype FSKbuilt in 1985 or 2,2 kWcut length 3500 mmsaw blade diameter ca. 180 mmpneumatic clampingrip fence with hand wheel adjustablefront extented tablerear extented tableveneer strip fence with stop fingerexhaust ductpneumatic service unitexhaust connection D 100 mmrequired space ca. l x w x h mm4400 x 1200 x 1300weight ca. 600 kgtotal connected power ca. 2,2 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Bjlq Ujvwf Uveiwcowl

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 3394, - 3700 mm cutting length - milling unit - rear support table - digital position display / adjustment via hand-wheel - gear rack balance on pressure beam - fence - pneumatically adjustable (autom. activated) - Touch panel Bwolqo Ic Rdo Uiwcol - Front support table, pneum. adjustable - Fence - pneumatically adjustable – 2 steps 600/900 mm

Condition: used, second handMade by ScheerType FM 2P-3000Machine no. 81394Motor 1.1 kWCutting length approx. 3000 mmpneumatic tension 1 cylinderrear support tableRequired space approx. 3600 mm x 1100 mm x 1300 mmWeight approx. 350 kgStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Bwjlq Uievwf E Iowcel

Condition: new, Year of construction: 2025, + with automatic feeding + intuitive operation via Touchscreen + saw unit 2.2 kW (3 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + milling unit 1.1 kW (1.5 PS) - invinitely variable height-adjustable on two high precision ball-rail-systems + cutting and milling height 45 mm + saw- and milling unit can be Bjlqebnu T Aj Uiwcswl lifted and lowered pneumatically + front support table pneumatically adjustable - width of support: 230 mm + guiding of the saw- and millingunit via of two high precision ball-rail-systems + central lubrication points for the simple and complete maintenance of the guiding carriage + pneumatic axial saw blade adjustment, 0 – 2 mm infinitely variable + electromotoric feed of the saw- and millingunit, (2 – 20 m/min infinitely variable) in self-holding contact + swivel switch console with rotating operating console + transparent lamella cover protects the cutting area + area of the saw and milling unit is totally fenced in metal sheets in front and at the side + power supply in cable duct with plastic link track + chipping device up to 25 mm + safety equipment

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Bwolq Uiwjvwf Agecsl