Used Flanged Motor for sale (25,598)

Condition: new, sheet thickness: max. 30 (bei 280 MPa) / max. 22 (bei 360 MPa)total power requirements: 124weight approx.: 54000messurements (LxWxH): 8000 x 2300 x 4700CAPACITYMax. thickness (280 MPa) mm 30 Max. thickness (360 MPa) mm 22 Max. flat plate diameter mm 7000 Min. flanging diameter (ØD) mm 1700 Min. flanging diameter (with additional manual   device) (ØD) mm 1200 Flanging (knuckle) radius (r) mm 120-850 Max. head height (H) mm 1535 Max. torispherical head diameter (ØD) mm 6000 Max. elliptical head diameter (ØD) mm 5500 Total power kW 124 SIZELength mm 8000 Width mm 2300 Height mm 4700 Weight (Approx.) Ton 54    QUOTATION SCOPE OF SUPPLY & PRICING Ledpfxex Dfmhe Ab Uert FMB 30x7000 FLANGING MACHINE Special steel and heat treated (one) knuckle roll – R100 mm Special steel and heat treated (one) flanging roll Hydraulic bottom support rollers adjustable in height Manual centralized auto-lubrication Control panel placed on the body Hydraulic (air) oil cooler Variable speed of rotation Automatic flanging feature (called CNC/NC by other manufacturers) Lightning for flanging area Telescopic and stainless protection cover sheet for bottom head holder channel Top and bottom head holders driven by hydro-motors Rear lifting cylinder Roll changing device

Condition: used, mileage: 7,05,000 km, power: 169 kW (229.78 HP), first registration: 03/1970, fuel type: diesel, number of seats: 34, next inspection (TÜV): 08/2026, color: yellow, Year of construction: 1969, 2 former Swiss Postbuses available as a package. Vehicle 1 Saurer L4C left-hand drive One of the last bonneted vehicles on a Saurer chassis. Bodywork by Ramseier + Jenzer. The vehicle underwent a complete professional restoration at Ramseier + Jenzer in 1991 (factory restoration). The previous owner had the vehicle for 40 years. Immaculately maintained and immediately ready for operation. 125 hp, 4-speed gearbox + overdrive, power steering, pneumatic doors at the front and rear, length 10,005 mm, height 2,980 mm, width 2,300 mm, 33 passenger seats + driver, 2 roof hatches, radio with microphone. Vehicle 2 Volvo chassis with Lauber body 23 passenger seats, automatic transmission, first registered in 1982, converted to a party bus, length 11,750 mm, 230 hp. Special package price: €99,000.00 Net export available. We make shipment worldwide. Lrsdpfx Absz Dhi Nj Ujt

Condition: new, power capacity / kW Lredpfx Aboy Spxae Ust volt / V ampere / A total power requirement 42,5 kW MOLL-Motor Typ: Y2PE-200LB2B3 / ML2001011997 V: 400/690 A: 64,0 / 37,1 / 64,4 Rpm: 2970 / 3564 Total power: 42.5kW Weight:260kg Condition: New

Condition: excellent (used), For sale: SEW-Eurodrive RF32DT71D6 geared motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear resulting from use. Thanks to its robust construction, it is ideally suited for driving industrial machinery, conveyors, feeders, rotary tables, and other drive systems. Technical specifications: Manufacturer: SEW-Eurodrive Model: RF32DT71D6 Gearbox type: RF32 Motor power: 0.25 kW Power supply: 220 V Δ / 380 V Y, 3-phase Frequency: 50 Hz Motor speed: 870 rpm Output speed: 36 rpm Gear ratio: i = 24.17 Protection class: IP54 Insulation class: B Mounting method: IM B5 Weight: 11.43 kg Lrodpfxjzm Rimo Ab Ust Country of origin: Germany The geared motor has a shaft with a keyway and a B5 mounting flange.

Condition: excellent (used), For sale: a line pump from the renowned German manufacturer KSB, model ETALINE ETL 032-032-200, complete with Siemens motor. This unit is intended for use in industrial installations, heating and cooling systems, as well as water circuit applications. TECHNICAL DATA OF THE PUMP Manufacturer: KSB Model: ETALINE ETL 032-032-200 Flow rate: Q 4.0 m³/h Lrodjywu Hajpfx Ab Uet Head: H 12 m Impeller diameter: 191 mm Rotational speed: 1459 rpm Year of manufacture: 2021 Flange connections MOTOR Manufacturer: Siemens Power: 0.55 kW Voltage: 400 V, 50 Hz Speed: approx. 1440 rpm Efficiency class: IE3 Design: ATEX Ex II 2G Protection: PTC CONDITION Very good condition Complete unit Minor visible signs of storage Technically fully functional APPLICATIONS Industrial process installations HVAC systems Water and liquid circulation Manufacturing plants Explosion hazard zones

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 250 mm, filter area: 80 m², noise level: 85 dB, actuation type: electric, total height: 3,000 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Equipment: CE marking, Used filter, model PC 8 TV, in excellent condition, like new. Year of manufacture: 2018 The electrical control cabinet for the filter is included. Upon purchase, the filter will be supplied with 8 new filter cartridges. Technical data of the PC 8 TV filter: No of cartridges: 8 pcs Filtering surface cartridge m²: 10 Filtering surface collector m²: 80 Total capacity m³/h: 6.000 Size of the cartridge mm: Ø325-600 No. of valves pcs: 8 Lrsdpfxoztqcts Ab Ujt El. motor power kW: 5,50 Static pressure Pa: 1.800 Air consumption max. m³/h : ~40,00 Dimension of filter A (length) mm: 1.700 Dimension of filter B (width) mm: 930 Dimension of filter C (height with silencer) mm: 2.950 Inlet flange Ø mm: 2x250 We reserve the right to errors in the data provided. We accept no liability for any errors or inaccuracies in the description or technical specifications.

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. Ledpfjyc T Apjx Ab Uert 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 1,450 mm, travel distance Y-axis: 2,250 mm, number of axes: 4, This 4-axis HBS MPW 2010/3K/4MZ/1FK was manufactured in 2019. It features a maximum X-axis travel of 1450 mm and Y-axis travel of 2250 mm, with a motorised working stroke of 0-200 mm. The machine is equipped with advanced servomotor technology and includes a fully automatic stud feeder and a chip extraction unit. If you are looking to get high-quality welding capabilities, consider the HBS MPW 2010/3K/4MZ/1FK machine we have for sale. Contact us for further details. - Working Range (X-axis): 1250 mm (heads 1 to 3) / Max. 1450 mm- Working Range (Y-axis): 2250 mm- Work Stroke (Z-axis): 0-200 mm (motorized, freely programmable, total stroke 215 mm)- Traverse Speed (X/Y-axis): approx. 48 m/min- Traverse Speed (Z-axis): approx. 25 m/min- Welding Capacity: approx. 30 to 40 studs/minute- Machine Accuracy (Steel/Aluminium): ± 0.2 mm (for HBS CD studs Ø3 - Ø8mm)- Stud Diameters: Ø 3 mm to Ø 8 mm (with flange)- Stud Lengths: 8 mm to 40 mm (feed output for 7 to 50 mm)- Primary Power: 3 x 400 V AC / 32 A / 50-60 Hz- Connected Load: max. 12 kVA- Air Connection: min. 6 bar, max. 10 bar- Air Consumption: approx. 10 l/welded stud- Control Unit: HBS PC Control (Schneider Electric)- Power Units: 3x HBS-CDMI 2402 / 230V EU units- Automatic Stud Feeders: 1x HBS VBZ-3 fully automatic stud feeder with bowl feeder- Automatic Welding Heads: 1x HBS KAH 412C LCD automatic welding head- Safety System: Category 4 safety light curtain (1500 mm height) with 2-side perimeter fence and Emergency Stop Lrsdpfx Abozx S Rco Ujt Included Accessories: HBS tool/conversion case for KAH 412, pneumatic hold-down device (HBS-PN-NH), 3-nozzle sprayer (MPW TC), VBZ-U6 conversion kit (Ø 3, 4, 6, 8 mm)

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Crossfeed 0.1 – 20 mm Cross travel rate 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding wheel spindle speeds 1450 / 2900 rpm Lrjdpfxjizka Io Ab Ujt Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent lift • Electro-magnetic clamping plate L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 piece grinding wheel with flange • Control panel • Lighting • Coolant system with belt filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 Lsdpfx Ajzpfgfob Ujrt THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Lredpfx Aber H Sqyo Ujt Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D Lrsdpfxezarn Eo Ab Ujt - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag No.: MR-INH-VPR61-KK6751 Equipment No.: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motors Stainless steel pump housing Inline design Heat Exchanger: Integrated stainless steel heat exchanger Shell and tube or jacketed tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Instrumentation: Pressure transmitter Pressure gauges Temperature measuring points Integrated flow measurement Electrical: Integrated control cabinet or terminal box Ready-wired for connection Industrial standard components Piping: Stainless steel process pipelines Fully insulated Ljdpfxjyl Ib Es Ab Uort Flange and clamp connections Transport: Forklift- and crane-compatible Heavy-duty stainless steel base frame Application The temperature control unit is designed for controlled temperature regulation of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical processing plants, as well as temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready to connect High-quality stainless steel construction Industrial-grade quality components, including GEMÜ valves Service-friendly design Condition New system Never used Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Premium industrial components Ideal for new projects or as a replacement/redundant unit Immediate integration possible

Condition: ready for operation (used), Siemens 1HC5106-0EJ16-1RU7-Z Motor SN: E0T86884001004 with Hübner Long Life Tacho TDP 0.09LT-3 - Z = A11 / G30 / K18 (radial shaft seal, oil-tight (oil-tight flange) - IP65), used, in good condition, 100% functional, delivery as shown in photos. ATTENTION: Please enquire separately for packaging and shipping costs! Lrodpfxsx Dvd Rs Ab Ust

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed Lrodpfx Aot Hwzijb Ujt • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 1,55,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Lodpjzu S U Hofx Ab Uert Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Ledpfxjwbqrte Ab Usrt Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel dividing saw 1x Compact label printer 1x "eye-M EVO" control console 1x Human-Machine Interface (HMI) software MAESTRO ACTIVE 1x Maestro pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance mobile air cushion table - 2500x600 mm, with infeed rollers 1x Double-sided automatic lateral aligner with motor drive 1x Foot switch for START/STOP of the work cycle 1x Set-up for grooving with height adjustment of the saw blade via the control system 1x "Autosetting" device on the saw carriage for cutting length/width 1x Main saw blade motor 25 hp (18 kW) 50 Hz with star-delta starter 1x Quick clamping of the saw blades with mechanical flanges "AKE" 1x Selective collet closure (area 0 - 1600 mm) Ljdpfx Asxlvkteb Usrt 3x Additional double collet 4x Additional collet with single finger 1x Compact Office label printer 1x Cut editor 1x Maestro optiwise - Advanced - N. 1 license 1x Maestro connect: Service agreement for 1 year (including "plug&play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: German 1x SPEC01 Special version 01 1x European safety regulations (CE marking) incl. 123 hours of on-site commissioning (within Germany) (daily working hours are 8 hours including travel time). incl. 1 day online training MAESTRO OPTIWISE PRO (as needed) incl. MAESTRO CONNECT 1 year incl. MAESTRO PATTERN IMPORT (255€ free of charge)!!! FULL MANUFACTURER'S WARRANTY IN THE FIRST YEAR!!! Due to customer insolvency, offered for sale at a reduced price. Location:

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 630 mm, grinding width: 200 mm, total length: 2,710 mm, total width: 1,288 mm, workpiece weight (max.): 130 kg, grinding wheel diameter: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 3,200 rpm, overall weight: 1,900 kg, grinding spindle motor power: 2 W, Equipment: CE marking, documentation/manual, The grinder is equipped with a two-axis digital measuring system, Magnenescale LG 20 (formerly Sony), manufactured by Vojus, a.s., Povážská Bystrica, year of manufacture 2000. The machine was manufactured according to CE (European conformity) standards. Accessories: balancer, flanges for grinding wheels, technical documentation. The machine has automatic feed in the transverse working axis; this is the top model from the manufacturer. Technical parameters: Max. grinding length 630 mm, Clamping magnet: 200 x 600 mm, Max. height between the table surface and the center of the grinding spindle: 525 mm, Grinding wheel speed: 3200 rpm, Maximum distance of the spindle axis from the table: 425 mm, Vertical manual feed of the grinding spindle: 0.002 - 0.03 mm and manual: 0.25 (0.5) mm/rev, Grinding wheel (diameter x width x bore): 250 x 20 x 75 mm, Max. workpiece weight: 130 kg, Spindle electric motor: 2.2 kW, Dimensions (l x w x h): 2710 x 1288 mm, machine weight 1900 kg. The grinder is in good technical condition and can be fully tested in our warehouse in Přerov. Lrodpfozz Amaox Ab Uot

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Design: PROFI crane system as a two-rail gantry with crane bridge Technical data Load capacity: 1,600 kg Crane bridge span: 5,100 mm Support spacing L: 5,570 mm Support spacing B: 5,100 mm Beam length: 5,470 mm Overall dimensions of the system: approx. 6,020 x 5,800 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of gantry beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Trolley / Running gear Type: SiCO-HF 2000 A Variant A Ledpfx Abozgrzqo Ujrt Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail gantry crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF Load hook Control / Operating element Main switch Steel supports and beam structure Documentation / Inspection certificate available Accessories as shown in the pictures Areas of application Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Weight Total weight of the system is approximately 2,000 to 3,500 kg, depending on experience, depending on the installed steel profiles, foundation plates and equipment variants. Condition Used. System was installed and in operation. Optical condition as shown in the pictures. Inspection certificate and documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF Support and beam structure Control / Operating elements Documentation / Inspection certificate Accessories as shown in the pictures Subject to changes and errors in the technical data and specifications. Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Lredpfxjzgtzlo Ab Ujt Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Lrjdpfx Abozqz Sgo Uot Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. Ledpfsx D Df Nsx Ab Uert c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm Lsdpfxezi Dhbe Ab Uert - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Machine type: Two-rail portal crane / crane system Load capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. This system is suitable for assembly work, production, mechanical engineering, maintenance, workshop operations, logistics, and general lifting tasks in an industrial environment. Technical data Span: 5,890 mm Column spacing L: 5,590 mm Column spacing B: 5,890 mm Girder length: 6,390 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal girder: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Classification according to EN 15011: HC2 / S2 Steel construction group: 18/30/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection rating: IP55 Weight with 5 m lift: 65 kg Manual trolley Type: SiCO-HF 2000 A Year of manufacture: 2020 Load capacity: 2,000 kg Girder width: 66 - 220 mm Lsdpozgv U Uofx Ab Usrt Weight: 17 kg Equipment Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Main disconnect switch Steel column and girder structure Crane test book available Hoisting equipment test book available EC Declaration of Conformity available Assembly and operating manual available Shipping data Longest component: approx. 6.4 m Heaviest component: approx. 300 kg Condition Used System was installed and in operation. Documentation and test records available. Scope of supply VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Column and girder structure Control / operating elements Test books and documentation Accessories according to existing documents and images The machines, tools, and other items visible in the pictures, which are not explicitly described, are not included in the scope of supply. Shipping or freight shipping possible. Subject to changes, errors and prior sale.