Used Günther Dpt 5 for sale (59,536)

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Weight: approx. 1,580 kg Guedpoy Rnrvofx Akaog Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H103-000-000, conveyor belt width: 1,600 mm, conveyor belt speed: 1,700 mm/s, total width: 1,854 mm, power: 2.2 kW (2.99 HP), axle spacing: 4,450 mm, construction width: 1,854 mm, Center distance: 4,450 mm Belt width: 1,600 mm Overall width: 1,854 mm Cheek height: 240 mm Conveyor speed: 1.0 m/s Belt quality: EP 400/3 4:2.0 mm normal quality Profiling: Steep conveyor belt, PB 1290 mm / PH 17 mm Drive: Van der Graaf drum motor Power: 2.2 kW Motor protection class/efficiency class IP 66 / ISO F Drive drum: Ø 160 mm (drum motor) Rubber coating: Metallic surface Deflection drum: Ø 175 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø 50 mm Idlers: Ø 63.5 mm Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm Side guide rollers: 2 pieces Ø 120 mm with grooved ball bearings Tensioning station: M16 threaded spindle Gsdpfx Akju T Ewweaoug

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H106-000-000, conveyor belt width: 800 mm, conveyor belt speed: 1,400 mm/s, total width: 1,066 mm, power: 3 kW (4.08 HP), axle spacing: 5,300 mm, construction width: 1,066 mm, Axle distance: 5,300 mm Belt width: 800 mm Construction width: 1,066 mm Gjdpfsyh Aqkox Akaeug Side plate height: 270 mm Conveying speed: 1.4 m/s Belt quality: EP 400/3 3:1.5 mm Standard quality Profiling: steep conveyor belt, PB 550 mm / PH 17 mm Drive: drum motor, Van der Graaf brand Power: 3.0 kW Motor protection class/Efficiency class: IP 66 / ISO F Drive drum: Ø 215 mm (drum motor) Lagging: metallic surface Return drum: Ø 190 mm, crowned Bearing: maintenance-free tensioning bearing Ø50 mm Carrying rollers: Ø 63.5 mm with buffer rings Carrying roller interval: 600 mm Carrying roller bearing: maintenance-free Return rollers: 2 pieces Ø 89 mm Side guide rollers: 2 pieces Ø 50 mm, L = 120 mm Tensioning station: threaded spindle M16 Special design: transfer chute, free discharge

Condition: good (used), Günther Pekel injector Guedpfxoy Hx A Dj Akaog 380V.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Gedpfxew N Iz Hs Akajug Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Gsdevz U Erjpfx Akajug Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Guodpfx Asxv Ayvjkajg Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders Guedpfxjzz Thbs Akaog (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100418005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 590 mm, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, mount diameter: 63 mm, total length: 9,485 mm, table length: 1,000 mm, total width: 4,609 mm, spindle speed (max.): 10,000 rpm, total height: 2,896 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, table load: 300 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 300 kg, torque: 136 Nm, rotational speed (min.): 3,800 rpm, rotational speed (max.): 16,000 rpm, overall weight: 18,000 kg, working range: 1,000 mm, spindle nose: HSK-A63, tool weight: 6 g, grinding spindle motor power: 54,000 W, spindle motor power: 54,000 W, Equipment: rotational speed infinitely variable, Zero hours HSTM 1000HD 5-Axis Turn-Milling Center Was not used in production / just OEM commissioning and preserved. Basic machine HSTM 1000HD X, Y, Z axis with absolute linear scale A axis Swivel axis / B axis C axis Pressure control of head clamping CNC-control system SIEMENS 840D SL Remote diagnosis system via Ethernet Patrol light Control cabinet with air-condition Milling spindle 16’000 rpm, HSK-A63 Machining hour counter Tool handling system with double gripper Chill unit Hydraulic unit Machine housing with front door L shape Standard machine color scheme Coolant supply unit, low pressure, paper belt filter Flush Gun Chip conveyor Guedjzvuu Sjpfx Akaeg Oil Mist exhaust system Documentation 1-fold in English + CD Machine option package Minimum quantity lubrication system High pressure cooling through spindle BEMA automatic adjustable coolant nozzles Tool measuring system BLUM Work piece measuring system BLUM 3D Probe Rotoclear window Handweel HT 2 Automatic operator doors CAD / CAM Software package “ Hamuel Single Blade” CSE Siemens simulation Transportation and lifting tool set Commissioning tool set Geometrical measurement set Available in Bangkok, Thailand Worldwide shipping

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100372005, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 465 mm, feed length X-axis: 40,000 mm, feed length Y-axis: 40,000 mm, feed length Z-axis: 40,000 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, mount diameter: 63 mm, total length: 5,350 mm, table length: 500 mm, table width: 450 mm, total width: 5,116 mm, spindle speed (max.): 16,000 rpm, total height: 3,082 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, table load: 250 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 250 kg, torque: 63 Nm, rotational speed (max.): 16,000 rpm, overall weight: 16,000 kg, working range: 500 mm, tool weight: 6 g, input voltage: 400 V, input frequency: 50 Hz, input current: 90 A, workpiece length (max.): 700 mm, workpiece width (max.): 400 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, rotational speed infinitely variable, Zero hours HAMUEL HSTM 500 HD 5-Axis Turn-Milling Center Was not used in production / just commissioning (by OEM) and preserved. Comes as complete shipset from MFG. - X, Y, Z axis with absolute linear scale - A axis - Swivel axis / B axis - C axis - Pressure control of head clamping - CNC-control system SIEMENS 840D SL - Remote diagnosis system via Ethernet - Patrol light - Control cabinet with air-condition - Milling spindle 16’000 rpm, HSK-A63 - Machining hour counter - Tool handling system with double gripper - Chill unit - Hydraulic unit - Machine housing with front door L shape - Standard machine color scheme - Coolant supply unit, low pressure, paper belt filter - Flush Gun - Chip conveyor - Oil Mist exhaust system - Documentation 1-fold in English + CD Machine option package: High pressure cooling through spindle BEMA automatically adjustable nozzles Tool measuring system BLUM Work piece measuring system BLUM Rotoclear window Handweel HT2 Gedpfx Akozvulkeaeug VNCK Siemens simulation Available in Bangkok, Thailand Worldwide shipping

Condition: used, functionality: fully functional, mileage: 3,68,792 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. Gsdjz Agkljpfx Akaoug AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 2,69,267 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Guodozzwg Ijpfx Akaeg Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 13 mm Front right - 12 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, Year of construction: 2003, Format: 750 x 600 mm (29.53 Zoll x 23 Equipment: Ryobi PCS-H Printing Control System Ryobi RPC Semiautomatic Plate Changer Gujdpsy Agg Asfx Akasg Ryobimatic AAC Dampening Automatic blanket cleaning device Upon request, we can send a video of all the cylinders.

Condition: used, Year of construction: 2005, Mitsubishi Diamond 3000 S -5 is a printing machine manufactured by Mitsubishi in 2005, with a format of 720 x 1020 mm and a print count of 300 million. Currently in production in Turkey, it features IPC II Intelligent Press Control, high-speed separators, a refrigeration and recirculation system, Grafix Digitronic powder device, SAPC semi-automatic plate changers, non-stop feeders, cylinder washing device, automatic plate cylinder cocking, automatic blanket washing device, and Mitsubishi Delta dampening system. The delivery terms are FCA. Format: 720 x 1020 mm Equipment: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Gjdpjvfxnxefx Akajug Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm Gjdoztqtfjpfx Akaeug - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, power: 56 kW (76.14 HP), Country of origin: China - Japan Standards Displacement: 5,204cc Dimension: 3,170 x 1,450 x 2,450 Brakes: Service: Hydraulic , Parking: Hand gross weight: 7,240 Gearbox type: Power Shift Lights-Front Combination Lights & Rear Combination Lights Mirror-Rear View Mirror (Right & Left Sides) Toyota - Side shift fork hang on Yellow strobe light Front combination lights Tilt cylinder hole boots High load backrest (flat steel type) Orange Seat belt Back up buzzer Rear pillar assit grip Rear view mirror right & left sides UNIT INDICATION mm/kg Long Forks - 1520mm Led rear working light (selective lightning condition) Rear combination lamp less System of active stability (SAS) Cyclone air cleaner (dual elements) Pre-cleaner Anti-restart ignition key switch Floor mat Cooling fan guard Gujdpfx Asy Tylaskasg WIDE VISIBLE MAST (V) - 4500 MM OR WIDE VISIBLE MAST (FSV) - 3700 mm Operator Presence Sensing System (OPS) Neutral Safety Switch Rated Capacity: 5000 kg - 8FD50N) Load Centre: 600 mm Steering : Power Steering Free Lift : 830 (With Load Backrest) Mast Type: 3 Stage Full Free Lift Mast Mast Lowered Height: 2200mm Mast Extended Height: 5135 mm (With Load Backrest) Overhead Guard Height: 2200 mm Carriage Type: Side Shift Carriage Lever: 3 Lever Fork Length: 1520 mm Tyres: Solid = More information = Number of cylinders: 6 Fuel tank: 120 litres

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Guodpfszrkycex Akaog Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table

Condition: used, Year of construction: 2014, 5 axis machine QUASER MF400C/12C Year of production: November 2014 Installation date 2015 Table: ∅320 mm Passages: X- 410 mm Y- 610 mm Z- 510 mm A- +30° -120° C- 360° Tool holder: BT40 Tool magazine: 30 pcs Max spindle speed: 12,000 rpm Cooling through the spindle Control: CNC SIEMENS SINUMERIK 828D Tool probe very good condition of the machine machine can be loaded on a standard truck height of the machine 275cm width 245cm Guedpfx Aoucliljkaog length 300cm weight of machine 7300kg

Condition: used, mileage: 7,64,869 km, power: 353 kW (479.95 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 15,900 kg, maximum load weight: 10,025 kg, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, compressed air brake, crane, cruise control, differential lock, onboard computer, truck registration, | Scania G480 6x2 roll-off truck with crane | Automatic transmission, EURO5 | Retarder | Trailer coupling, cruise control | Multifunction steering wheel, air conditioning | Electric windows | Differential lock | Austrian vehicle | Subject to errors, input errors, and prior sale. Gjdpfx Akszty Uloajug

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 38 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,500 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, USB port, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. Gusdpjzwk R Sefx Akaog The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 12,776 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 34 kW (46.23 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Gsdezz Uiajpfx Akaeug Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: DOOSAN D25S diesel forklift - - - 2.5 ton lifting capacity - - - Year of manufacture 2012 - - - Side shifter - - - TRIPLEX free-lift mast - - - Overall height 2.17m - - - Lifting height 4.80m - - - 12714 operating hours according to meter - - - Forklift with 4-cylinder YANMAR diesel engine, 49 hp - - - Mechanical hydraulic levers - - - Solid rubber tires, front approximately 70%, rear approximately 50% - - - LED work lights, front and rear - - - Simple and mechanical forklift - - - Good condition - - - Front forklift can be viewed on site - - - New inspection certificate and new inspection carried out by a court-certified expert - - - Affordable delivery options!! Side shifter, 3rd valve, work light rear, work light front, heater, full cabin

Condition: used, maximum load weight: 2,566 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 07/2024, loading space length: 6,060 mm, loading space width: 2,200 mm, loading space height: 2,270 mm, total width: 2,260 mm, total height: 930 mm, Errors and prior sale excepted! Internal number: A19. 4012342 ----EQUIPMENT * Trailer with high loading platform * Axle shock absorbers * 100 km/h approval * Removable aluminum sideboards * Removable corner posts * 2x loading ramps (2,500 mm) under the loading platform * Automatic support wheel * Drum brake system * Knott inertia brake unit * Wooden floor panel (screen-printed plywood in one piece) * 24x lashing hooks on the loading platform * Tarpaulin cover with spreader bar frame Gusdpozh Sl Ssfx Akasg * Sliding tarpaulin on the left and right ... and more. ---- The vehicle is in original condition! Delivery throughout Germany is possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing/leasing is also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, nominal power (apparent): 7 kVA, Number of controlled axes: 5 X-axis travel (longitudinal): 6650 mm Y-axis travel (transverse): 800 mm Z-axis travel (vertical): 525 mm B-axis rotation (vertical-horizontal): 0° to 90°, continuous C-axis rotation (perpendicular to the work plane): 0° to 360° Gusdpozz Stvofx Akasg Electric spindle power at 24,000 rpm: 7 kW Number of independent work areas: 2 Tool holder taper: HSK-E 40 Tool magazine capacity: 9 + 1 Maximum dimensions of disc cutter: diameter/thickness: 300 / 5 mm Automatic positioning of vices

Condition: new, Year of construction: 2026, Equipment: ABS, 5 Axle Lowbed Godpfx Ajrlm Txjkaoug Please get contact with us for more informaiton;

Condition: used, functionality: fully functional, SCM Sandya 5 wide belt sander Working width: 1100 mm Sanding height: 4 – 170 mm 1 metal sanding unit 2 combi sanding units Gusdpfx Akszx Afqeaog Electric height adjustment Optical oscillation