Used Goodway Ga 260 for sale (8,589)

Condition: new, Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number Z6653, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ledji Ec D Aepfx Afuoac

Condition: new, Brinkmann STC 260 / 460 MVX + 443 submersible pump, 250 L/min, No. 002, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Laedpei D Hkijfx Afusc

Condition: ready for operation (used), Brinkmann TC 260 / 460 MV + 210 submersible pump, 250 L/min. No. 003, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Ledpfx Afei D Hmweusac

Condition: ready for operation (used), GMN TSE 75 cdu x 260/15000 high-speed spindle, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lasdpfx Afoi Eaa Ujuec

Condition: ready for operation (used), Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number X5017, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Lajdpfxji Ec Dxs Afusc

Year of construction: 2012, condition: excellent (used), functionality: fully functional, The technical condition is very good, and the device has been tested. This means that the devices are calibrated, perform 100% accurate measurements, and are regularly warmed up for at least 12 hours once a month. It is possible to perform an on-site transformer oil test – of course, after initial verification to compare the results, as shown in the photos. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay! Laodpjzcmblefx Afujc The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. A gas standard (a cylinder with calibration gas) ensures measurement consistency with concentration standards. Before performing a measurement, the device is always calibrated, and its functionality is checked. A special shaking syringe (included) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research facilities serving the power industry. PPMReport software with a Polish language version is included. It has built-in diagnostic tools: Duval's triangle and Rogers' ratios. Used by power plants, system operators, and laboratories serving the power and industrial sectors. The field version is equipped with a special pressure vessel for helium carrier gas (purity 99.999%). It is supplied with shaking syringes for preparing the extraction gas cushion, syringes for calibration, and an air sample. TECHNICAL PARAMETERS Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide C02, Oxygen 02, Nitrogen N2) Measurement range for gas concentrations in oil: H2: 5-60,000 ppm, Other gases: 1-60,000 ppm, 02: 60 ppm - 100,000 ppm, N2: 500 ppm - 100,000 ppm : 1050 mm 3. TECHNICAL DESCRIPTION Gas chromatograph for testing insulating oils using the DGA (Dissolved Gas Analysis) method, for field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay. The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. The condition is very good. We have two identical, fully functional units. If you purchase both, the price of one will be 50% lower. Before purchasing, I recommend inspecting and testing the equipment on-site (performing a test). The last test was performed on November 21, 2025, and compared with another MYRKOS device (the test was verified in a certified laboratory). Available for viewing in Rzeszów.

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 Lodpfx Aszc Hn Esfueac If you have any questions or require further information, please contact us by email or phone.

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 DSL - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpm Movement X/Y/Z : 2600/1100/900 mm Tool holder : SK 40 In General: Year of manufacture:2022 Control system:Siemens 840 Dsl - Celos Travel ranges X/Y/Z:2,600/1,100/900 mm Spindle speed:20,000 rpm Tool holder:SK 40 Spindle: Technology:Direct drive spindle Speed:20,000 rpm Max. power:35 kW Max. torque:120 Nm Tool holder:SK 40 NC swivel head: Technology:Swivel axis (B-axis) Travel range:+/- 100° Work table: Technology:Fixed table with integrated NC rotary table Total clamping area:3,200 x 1,100 mm Total table load capacity:4,000 kg/m Clamping area of NC rotary table:1,050 mm Max. table load capacity of NC rotary table:1,200 kg/m C-axis:360° Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper with ATC shuttle Max. tool diameter:130 mm Max. tool length:300 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:CTS system, 80 bar Tool measurement:BLUM laser Workpiece measurement:Heidenhain TS 460 Lasdpfx Afozbgcgjujc Kinematics measurement:3D quickSET ready Emulsion mist separators:2 units, mechanical Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel

Condition: good (used), functionality: fully functional, working width: 410 mm, total width: 410 mm, total length: 410 mm, total height: 200 mm, Gas burner, 1 unit, for town gas TOP Heide burner AKO 70 Tabletop model Rated heat output 3.8 kW Unit has been cleaned Dimensions: 410 x 410 x 200 mm (W x D x H) Used unit, cleaned Lodpfxot Sp I Eo Afujac More units in stock!

Condition: good (used), functionality: fully functional, overall weight: 35 kg, total length: 410 mm, total width: 820 mm, total height: 700 mm, Heidebrenner TKO 71 - 2-burner gas stove for natural gas Stainless steel construction with chassis Rated thermal load: 2 x 3.8 kW Dimensions: 820 x 410 x 700 mm (W x D x H) Used equipment Lasdpfx Afsyakkloujc Visit our showroom!

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 150 kg, Equipment: type plate available, Weishaupt WM-GL 10/3-A ZM-T, power output 110-1000 kW. 3 units available. Year of manufacture: 2010 Burner power regulation: gas – modulated oil – 3-stage Gas path of the burner: maximum supply pressure 500 mbar (gas paths for other supply pressures available upon request) The burner is equipped with a DMV 525 gas valve, an FRS 520 stabilizer, and a 520/1 filter. Flame tube extended by 100 mm (we also have WM-GL 10/3 burners without extension). Fuel type: natural gas, LPG, light fuel oil. Burner power output in the range of 110-1000 kW. Burner control unit: WFM 54 + AGM module Electric motor 1.5 kW / 380V. Laedpfxjzcg Hzj Afujc CE certificate + complete burner documentation (manual + burner electrical diagram). QRA 2 photocell. The burner is in good working order and complete, having undergone a comprehensive inspection. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee 100% functionality of the burners we sell. We also have other burners and spare parts for all Weishaupt burner models available for sale.

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Lodozf Afqspfx Afusac Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: excellent (used), functionality: fully functional, Heidebrenner stool cooker gas burner Ljdpfx Aohq Hn Tsfusac Model: AKO 70 Gas burner 1 flg. stainless steel version with chassis for bottles of gas Nominal heat load 5.8 kW Dimensions: 410 x 410 x 850 mm, WxDxH Used device cleaned Come to our large bakery machine warehouse and find your machine!

Condition: used, Year of construction: 2011, Scissor lift – JLG 260 MRT-A Manufacturer: JLG Model: 260 MRT-A Year of manufacture: 2008 Technical data Working height: 9.92 m Platform height: 7.92 m Platform length: 2.59 m Platform width: 1.65 m Total weight: 3,390 kg Length: 2.67 m Width: 1.75 m Overhead clearance: 2.36 m Basket load capacity: 570 kg Outriggers: none Drive: Diesel Lasdpfxszd Hzge Afujc Special equipment Platform extension: 1.22 m Off-road tires, foam-filled All-wheel drive Driver's license class 3/B Dates/status TÜV (technical inspection): not applicable UVV (accident prevention regulations): valid until: 07/2026 Mileage: not applicable Operating hours: 2,448 hours as of 02/2026 Indicated price plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m. Subject to changes and errors!

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Laedpfx Afszd Urmsusc Center height over bed: 125 mm 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Space requirement, length x width: 1.2 x 0.6 m Estimated weight approx.: 400 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. Laodji Ri Hrepfx Afuoc 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Year of construction: 2023, condition: used, Best regards, including: automatic sample injector autosampler 7693A, 5977C GC/Insert Plus MSD Turbo EI/CI package, 8890 GC system mainframe MS Ready S/SL, AIS tower, serial no. CN23285160, membrane vacuum pump, manufacturer Pfeiffer, serial no. 109120905, vacuum pump Duo Line, manufacturer Pfeiffer, serial no. 22139727, gas lines / valves, serial no. MY2328V093 +++ Please note: This item is part of an online auction! +++ Lasdsyvgqwepfx Afusc

Condition: good (used), functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, lifting height: 4,750 mm, fork length: 1,200 mm, overall weight: 4,000 kg, total height: 2,100 mm, total length: 4,000 mm, total width: 1,200 mm, Equipment: fork extension, DOOSAN G 20 SC-5 LPG Forklift - incl. fork extensions: 2000 mm Lasdpfx Ajy Dcwmefusc Note: The item must be collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: like new (used), Threading jaws R 2 to GA 4 Threading jaws for Georg Fischer GA 4 threading machine Ljdpfxjivzcko Afueac as new GF Art. 012209

Condition: used, mileage: 4,37,913 km, power: 194 kW (263.77 HP), first registration: 05/2021, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 5,350 mm, fuel: diesel, fuel tank capacity: 340 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,460 mm, total width: 2,550 mm, permissible axle load (axle 1): 6,000 kg, permissible axle load (axle 2): 7,350 kg, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,620 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, spoiler, tail-lift, traction control, = Additional options and equipment = - Aluminium fuel tank - Rear work lights - Front work lights - Leaf suspension - Brake booster - Combination lights - DAB radio - Roof cover - Roof spoiler - Differential lock - Clear-view mast - Remote central locking - Windscreen - Enclosed cab - Speed limiter - Cab - Air suspension - Air-suspended seats - MX engine brake - Particulate filter - Radio/CD player - Radio/cassette player - Reversing camera - Disc brakes - Side door - Sun visor - Lane departure warning system - Stability control - Blind spot camera - Automatic pre-heater - Alarm clock = Further information = Technical information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Gearbox: 6A1000, automatic Axle configuration Tyre size: 285/70R19.5 Front axle: Max. axle load: 6,000 kg; Steering; Brakes: no brakes; Suspension: leaf suspension Rear axle: Twin tyres; Max. axle load: 7,350 kg; Brakes: disc brakes; Suspension: air suspension Weights Unladen weight: 7,653 kg Payload: 6,347 kg Gross vehicle weight: 14,000 kg Functional Tail lift: d'Hollandia DHLM.20, tailgate, 1,500 kg Identification Registration: 09-BRN-9 Ljdeyxlv Uopfx Afuoac

Condition: used, mileage: 3,71,204 km, power: 194 kW (263.77 HP), first registration: 05/2021, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 5,350 mm, fuel: diesel, fuel tank capacity: 340 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,490 mm, total width: 2,550 mm, permissible axle load (axle 1): 6,000 kg, permissible axle load (axle 2): 9,599 kg, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,620 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, spoiler, tail-lift, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Leaf spring suspension - Brake booster - Combi lights Laodpeyxlv Isfx Afujc - DAB radio - Roof cover - Roof spoiler - Differential lock - Clear-view mast - Remote central locking - Windscreen - Enclosed cab - Speed limiter - Cab - Air suspension - Air-suspended seats - MX engine brake - Particulate filter - Radio/CD player - Radio/cassette player - Reversing camera - Disc brakes - Side door - Sun visor - Lane departure warning system - Stability control - Blind spot camera - Automatic heating system - Buzzer = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Transmission: 6A1000, automatic Axle Configuration Tire size: 285/70R19.5 Brakes: Disc brakes Front axle: Max. axle load: 6,000 kg; Steerable; Suspension: Leaf spring suspension Rear axle: Dual tires; Max. axle load: 9,599 kg; Suspension: Air suspension Weights Unladen weight: 7,498 kg Payload: 6,502 kg Gross vehicle weight: 14,000 kg Functional Tail lift: d'Hollandia DHLM.20, rear tailgate Identification License plate: 98-BRP-3

Condition: excellent (used), Year of construction: 2011, S016230 PROD. ATLASCOPCO TYPE GA75VSD S/N API658180 YEAR 2011 POWER (kW) 75 CAPACITY (m3/min) 14.68 PRESSURE (bar) 13 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 Ledpjzcnu Tsfx Afujac NEW/USED USED

Condition: excellent (used), Year of construction: 1999, Manufacturer BLACKHEAT BH 50 year of production: 1997-2002 Lodpfsn Uvgisx Afusac heat output: 45kw gas type: G20 nozzle diameter: 6mm nozzle pressure 8.7mbar pipe length: 9-12 meters p connection: 360mbar Connection voltage: Max. current consumption: IP30 AC 230V 50Hz

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Lodpfx Ajg R Sh Ajfujac Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas Laedpfxohrnv Ne Afujc axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm