Used Grecon Finger Jointing Line Long Wood for sale (21,832)

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Fjdow Uf Tkepfx Anzsph Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WORKING DIMENSION 250x150 mm MILLING MOTOR 50 HP HYDRAULIC POWER UNIT MOTOR 20 HP PUSHING FORCE 40T MAXIMUM WORKING SECTION 250x150 mm EXIT ROLLER CONVEYOR NOT INCLUDED Fpsdpfow E Etyjx Anzeh

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min Fsdpfev T Aqyox Anzeph 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm OPTIONAL with hydraulic unit Fsdjt Sc T Iopfx Anzsph

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Fjdevwfaxspfx Anzoph

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Fpodpfx Aovwfqqenzjh

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm Fodevwf Dwepfx Anzjph thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee

Year of construction: 2007, condition: reconditioned (used), Fully automatic finger jointing line: Type Doppel-Pack Feded Tipaspfx Anzoph Machine is dismantled Machine is overhauled specification: Wood entrance length: min. 150 mm max. 1000 mm average 400 mm Wood cross section: min. 20 x 40 mm max. 80 x 180 Wood exit length: 6030 mm Max. Wood cross section with 10 mm tine size: hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Leimart. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Tine length / possibly wood cross section and type of glue can still be adjusted capacity: 6 milling tables/min working height: 960mm table width: 600 mm Glue application: double-sided application Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min - max): 40-155 Part thickness (min - max): 20-80mm Working height : 960mm bundle width: 600mm Glue application: double-sided application (on both sides of the

Year of construction: 2020, condition: new, Finger jointing line Huckle Fpodpfxsfhkvlj Anzjh

Condition: used, Price on request. Comprising: Fjdjwwg Amspfx Anzjph Minda grading line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in the rack) Cross-section: max. 80 x 260 mm = 208 cm² Performance of vacuum stacking with lifting column: Section I: 3 layers/min Section II: 2 layers/min Finger jointing by Grecon Destacking, planing line and cross transfer platforms by Minda

Condition: used, Mini finger joint cutter Mini finger joint cutter head Finger joint cutter 100 different pieces in stock Finger joint cutters mini finger joint cutter Fpjdpfxsrr Uphj Anzoh finger joint milling tool milling cutter finger joint

Condition: used, machine/vehicle number: 007975, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW DET LINE Fjdpfx Aswmw Edonzjph Position 2: introducer FERWOOD CUSTOMIZED-FW DET LINE Position 3: Double Squaring Machines FERWOOD CUSTOMIZED-FW DET LINE Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW DET LINE Position 5: Double Squaring Machines FERWOOD CUSTOMIZED-FW DET LINE Position 6: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW DET LINE

Condition: good (used), LED high bay light, light fixture, high bay light, industrial lighting, industrial lamp, linear light, LED spotlight, high bay low beam light -Manufacturer: lichtline, LED high bay light with swivel arm -Power: 150 watts 5000K -Swivel arm: Length 3860 mm -Dimensions: 3860/340/H210 mm Fsdpfxsh N Tifj Anzsph -Weight: 56 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WFDFLT33902027826, empty load weight: 6,590 kg, maximum load weight: 28,410 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2021, next inspection (TÜV): 02/2027, loading space length: 15,020 mm, loading space width: 2,490 mm, loading space height: 2,810 mm, total length: 15,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, tire condition: 60 %, color: red, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, For sale is a FLIEGL SDS 390 X-TRA LONG curtainsider trailer. The trailer features both a large and a small pallet storage box, Alcoa alloy wheels, work lights, fire extinguisher boxes, and an air pipe system for roof de-icing. The trailer is in excellent technical and visual condition. The vehicle has low mileage and is in very good condition! Specifications: - First registration: 01.02.2021 - VIN: WFDFLT33902027826 - Inspection (HU): 02/2027 - Safety inspection (SP): 08/2026 - 1st axle tires: 385/65R22.5, tread depth approx. 60%, air suspension - 2nd axle tires: 385/65R22.5, tread depth approx. 60%, air suspension - 3rd axle tires: 385/65R22.5, tread depth approx. 60%, air suspension - Galvanized and painted chassis Fpjdpsyqxkhsfx Anzsh - Portal doors - Alcoa Dura-Bright aluminum wheels - Air Pipe to prevent ice formation on the roof - Work lights - Mud flaps - Pallet storage boxes - Fire extinguisher box - Load securing curtain Non-binding offer, subject to input errors, changes, mistakes, and prior sale. Financing available upon request. We are also happy to organize customs clearance for you. Opening hours: Mon-Fri 8 am - 4 pm or by appointment Price is NET / negotiable basis An invoice with VAT shown will be issued upon sale. Vehicle location: Im Gewerbepark 11, 99441 Umpferstedt

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made Fpodpey R Az Sofx Anzjh – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2010, functionality: fully functional, coil weight: 16,000 kg, inner diameter: 640 mm, sheet thickness (max.): 5 mm, working width: 1,500 mm, total length: 24,500 mm, product width (max.): 1,500 mm, Longitudinal Slitting Line YC 180 Technical Specifications: Line length: 24.5 m Line width: 7.8 m Material thickness: 1.5 to 5.0 mm Max. coil diameter: 1.8 m Coil inner diameter: 640 – 800 mm Max. coil width: 1,500 mm Max. coil weight: 16 MT Installed power: 253 kW Line speed: • At 1.5 mm thickness: 110 m/min • At 4.0 mm thickness: 95 m/min Tooling & Accessories: • Slitting knives – total 186 pcs: Set 1 – 10 mm, Ø307: 26 pcs Set 2 – 14 mm, Ø315: 66 pcs Set 3 – 14 mm, Ø315: 50 pcs New – Ø320: 44 pcs • Rubber rings – total 93 pcs: Set 1 – 25 mm: 31 pcs 15 mm: 12 pcs Set 2 – 25 mm: 31 pcs 15 mm: 18 pcs Set 3 – 25 mm: 31 pcs 15 mm: 18 pcs • Spacers: Slitter knife spacers: 480 pcs Separator spacers: Metal: 252 pcs Fpodowylavepfx Anzoh Non-metal: 369 pcs • Spare slitter shafts: 1 complete set General Information: Manufacturer: Winfos, Taiwan Year of manufacture: 2010 In operation since: 2017 The machine is fully operational and can be inspected in production. Available for dismantling at the beginning of 2026.

Condition: refurbished (used), Year of construction: 2023, Lengthwise and crosswise parquet line completely renovate with fully guarantee. Fpodpfxolaxino Anzsh Width min/max 80-400 mm Length min/max 500-3000 mm 4+4 motors per side Customized machine according to customer needs

Condition: used, Year of construction: 1999, functionality: fully functional, Complete line consisting of: 1. Angelo Cremona Veneer Peeler – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Composer – description and photos available in the listings PEELING PLANT Comprising of: Centering Loader 1. Model CE08 2. Angelo Cremona 3. Positions logs for loading onto the veneer peeler 4. Power supply: 400Vac/50Hz – 50kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Weight: kg Maximum dimensions: 600x300x400 mm 5. Production capacity: 4 logs per minute Veneer Peeler 1. Model SFH870 2. Angelo Cremona 3. Peels a sheet of wood from the rotation of the log 4. Power supply: 400Vac/50Hz – 240kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 10 L/min Maximum dimensions: 600x400x300 mm 5. Production capacity: 50 cubic meters per shift Cutting and Sorting Line 1. Model TSR27 2. Angelo Cremona 3. Transports the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply: 400Vac/50Hz – 70kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Fedpfx Asvm An Eenzeph Maximum dimensions: 300x200x200 mm 5. Production capacity: 50 cubic meters per shift Sorting Line and Vacuum Stacker 1. Model LTR27 2. Angelo Cremona 3. Separates and stacks recovered sheets from full-size sheets 4. Power supply: 400Vac/50Hz – 180kW Compressed air consumption: -- Maximum dimensions: 300x1300x500 mm 5. Production capacity: 50 cubic meters per shift

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min Fsdpfx Anop R Iwhozoph This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. Fsdpfx Asul Uizsnzsph 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons Fpjdpfx Anjyf A H Nezeh

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Fsdshgbarjpfx Anzjph Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. Fjdoq N U Duopfx Anzsph - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: excellent (used), functionality: fully functional, Grecon Dimter Opticut S50 Optimizer Maximum material input length: 5000 mm Wood width min/max: 20-300 mm Wood thickness min/max: 10-100 mm Capability to cut bundles Defect cutting CE certified Fpsdpjzaug Rofx Anzoh

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | Fpjdpfxoq Nywxo Anzjh | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.