Used Head And Tail Band Machine for sale (73,748)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 1,700 kg, Equipment: documentation/manual, Universal machine COMEC RCG 900 for reconditioning cylinder heads, engine blocks, drums, and discs for cars and trucks. Planing width: 320 mm Planing length: 900 mm Bledpfx Amey Rffyenoi Maximum working height: 370 mm Maximum table travel: 1200 mm Feed rate: 0.8 - 450 mm/min Maximum brake drum diameter: 1400 mm Head motor: 5.5 Hp Brake machining speeds: 35-70-50-100 rpm Approximate weight with accessories: 1700 kg Dimensions: 2300 x 790 x 1700 mm (h)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. Bodpfx Asxdr Swjmneli The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Bsdpfx Amoy Exwfjnjli Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: new, Catalogue No.: HZ014 – Pre-milling Bljdpfx Amoza Emhonei – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Blsdsycqhcjpfx Amnsi Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Blodsy Ruzqopfx Amnji

Condition: ready for operation (used), Jaespa AS 6 Vertical Band Saw Blade length: min - 4400mm; max - 4600mm Table: 670mm x 670mm Thrust: 620mm Weight: 834 kg Dimensions: 1400mm x 800mm x 2250mm (L x W x H) You are welcome to stop by for a viewing. We are happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Bledpjwcp Rkjfx Amnoi Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 1992, Elcos 2 head drilling machine is a machine manufactured by Elcos in 1992, with a format of 45 x 150 mm. Currently stored in Germany, it features a drill distance of 45 - 150 mm, space behind the drill heads of 100 mm, and is a double head paper driller. It operates with a lever and is single phase 240 volts. The delivery terms are FCA. Format: 45 x 150 mm Equipment: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts Bsdpfewvuubsx Amneli

Condition: used, 4 Kopf Bohrmaschine / 4 head Paper Drilling machine Nagel Citoborma 480 AB Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Blsdpfozcfwfox Amnoi

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: AH/005553, functionality: fully functional, input voltage: 400 V, input current: 78 A, input frequency: 50 Hz, overall weight: 4,400 kg, Main specifications: • Panel thickness: max 60 mm Blsdpfx Amszgnx Sonsi • Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) • Feed speed: up to 25 m/min • Glue system: [EVA / PUR] Configuration: • Pre-milling unit • Gluing unit with pressure rollers • End-trimming unit • Top/Bottom trimming unit (rough & fine) • Corner rounding unit • Radius edge scraper • Glue scraper • Buffing unit Machine Condition: • Excellent working condition. • Regularly maintained. • Available for inspection and testing while powered.

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Bedpfx Amezdq Ttjnoli

Year of construction: 2005, condition: good (used), Double-head PVC profile welding machine. Blodpfx Aezdqpbsmnji

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 390701, For sale: a two-head welding machine, URBAN model AKS 3900. The machine is in perfect working order. It was used in a single-shift production environment. Year of manufacture: 2021. Purchase invoice date: 2022. Bsdezd Ra Tjpfx Amnsli

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 2,45,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Bedpfxeycvcxe Amnoli

Condition: good (used), functionality: fully functional, Cutting speed, continuously variable: 20-70 m/min Saw blade: 3660 x 27 x 0.9 mm Feed length: 400 mm Cutting range – round / square: 250 / 250 mm Bljdozgdbispfx Amnei Cutting range – rectangular: 300 x 260 mm

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Bledpfjzb Aicox Amnji Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Suitable for curved shaped edges Good condition, possible to test ! Blodezc Hxqjpfx Amnoi

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg - Details: - └ Description: Shaft of the drive rollers is loose with the machine Blodpoym Rt Hefx Amnji - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Vollmer hydraulic press Type PMH 10 U with support blocks in very good condition Bodoci Dfhspfx Amnjli

Condition: new, Year of construction: 2026, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Bljdpfx Amoi D Dgwjnji Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: Bjdpfxezgwzvo Amnjli – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: used, Year of construction: 1979, Format: 920??1300 mm Bsdpfxjy Iu Rte Amnsli Equipment: Maximum sheet size 920??1300 mm, minimum size 560??1300 mm opening width within frame 920??1310 mm, maximum die size 910??1300 mm maximum die-cutting area 900??1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Bsdpfxey Sd Uij Amnoli Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius trimming blade, corner milling cutter, surface trimming blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius trimming blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Bsdpfelht Hwox Amneli Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation incl. glue outlet device, HF miter saw station (approx. 12000 rpm), HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and replaceable blade milling cutter (combination version), corner rounding cutter, radius trimming blade, surface trimming blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change preparation for corner milling cutter F5/08/5 additional replacement motor for corner milling cutter with tool set F5/09/4 multi-radius trimming blade (R1/R2) F5/24/1 spray device for release agent F5/24/2 spray device for cleaning agent F5/25 spray device for edge F5/27 nesting for milling cutter and radius trimming blade F5/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: Available from stock in 54634 Bitburg - available in week 4 -

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Bljdpfslht Hzsx Amnei F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)