Used Hera Cop 110/3100 for sale (7,822)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Type E Brake 100 3100 Bedpfxszbhk Es Adcewn Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Bsdpfxjvf E Avs Adcswn Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Bsdpfxoza T Dbs Adcewn Equipped with a flat-bedding system / bending / hemming function Includes a set of tools

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Bjdpfx Adow Dcccscewn

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 Bwodpsu Idp Djfx Adcen table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: used, Year of construction: 1990, Technical details: pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch table-size: 3100 x 60 mm work height max.: 890 mm connection voltage: 3x380 V / 50 Hz V total power requirement: 5,5 kW weight of the machine ca.: 7,9 t Bwsdpfxsu Icdas Adcon machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit incl. accessories in stock i.D. *

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° Bjdpfxeu Utwbs Adcjwn table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: new, bending length: 1550sheet thickness: 3.5upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 995,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor Bwedpfx Aded Ab N Decsn We have many references!

Condition: new, bending length: 1050sheet thickness: 5upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device Bwjdpfxjd Ab N Ho Adcsn - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 725,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Bsdpevvkazefx Adcjwn

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: GG11OC-11407, total length: 8,100 mm, total width: 1,400 mm, total height: 2,700 mm, overall weight: 3,390 kg, For sale: professional Bottero 110 FC glass edging machine, designed for straight-line grinding and polishing of flat glass edges. This machine is ideal for glass processing plants, manufacturing facilities, and producers of glass components for furniture, doors, balustrades, and shopfronts. Technical Specifications: - Number of grinding wheels: 10 - Glass thickness: 3–50 mm - Minimum glass size: approx. 40 × 40 mm - Feed speed: 0.6–6 m/min - Installed power: approx. 27.5 kVA - Machine weight: 3390 kg - Approximate dimensions: 8100 × 1400 × (height) 2700 mm This machine is manufactured by Bottero, a renowned Italian brand known for durable and reliable solutions for the glass industry. A major advantage is the easy access to service and the wide availability of spare parts on the market. If you have any questions, feel free to contact me. Bsdpfx Adoyr Ax Ejcown

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Bwodjyguhhspfx Adcon Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Bwsdpfey Sl Epox Adcon Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core puller x 1 Hardened injection unit - bimetal Machine was serviced by the authorized Engel service Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pump/motor: 18.5 kW Heating output: 9.2 kW Total output: 27.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Indramat rotor for MAC 090A-0-RD-4-C / 110-A-0 / WI522LX motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bodpfx Adezahu Iocewn

Condition: ready for operation (used), Indramat stator for MAC 090A-0-RD-4-C / 110-A-0 / WI522LX motor, serial number: 51271, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bwsdpszahu Uefx Adcjn

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Bwjdpfxjw Sl T Se Adcjn Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending Bjdpfxoxbzpts Adcewn * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, The RM Super Rain 890 GX 110/550 is a hose reel irrigator (reel system) from the Super Rain / GX series by the Italian manufacturer RM Irrigation. The designation 110/550 refers to a hose with a diameter of 110 mm and a length of 550 m. It is designed for irrigating large agricultural areas. Bwodpfx Asxgha Nedcsn

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,352 h, load capacity: 4,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200x50-10, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 10,400 kg, empty load weight: 6,400 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,620 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, sideshift, COMBILIFT C4000 – 2016 | 4352 MTH | DIESEL | DUPLEX 4050 mm Ready to work from day one – no investment, no risk --- ### Why this forklift? Are you looking for a machine that will not stop your production? ⚙️ This COMBILIFT C4000 is a proven unit after a full service – ready for immediate operation, with no hidden costs. ✔ Fully serviced (oils, filters, complete inspection) ✔ Technical & visual condition: like new ✔ Only 4352 MTH – low operating hours ✔ New tyres – no additional investment required --- ### Key specifications ✔ Capacity: 4000 kg ✔ Diesel drive ✔ Duplex mast – 4050 mm ✔ Fork positioner: 3100 mm ✔ Forks: 1100 mm ✔ Full cabin Bwedpfxsy U U Hbe Adcjn --- ### Technical details ✔ Year: 2016 ✔ Weight: 6400 kg ✔ Load centre: 600 mm ✔ Lifting height: 4050 mm ✔ Dimensions: * Length: 1230 mm * Width: 2620 mm * Height: 2400 mm ✔ Tyres: super elastic (new) ✔ Equipment: cabin, wide fork positioner ✔ Condition: * Technical: 5/5 * Visual: like new, no corrosion --- ### Ideal for ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industry ✔ Handling of long loads ✔ Indoor & outdoor use --- ### What you get Not just a used forklift – but a ready-to-work solution: ✔ Fully tested before sale ✔ Ready for immediate use ✔ Online presentation available ✔ Transport available --- ### Why FT LOGISTICS? We deliver machines that work – not ones that sit in the workshop. 🚀 ✔ 100+ machines available ✔ In-house service & preparation ✔ Pan-European experience ✔ Hundreds of satisfied clients

Condition: used, Year of construction: 2004, OVERVIEW This Krones KES-2-4-312/25-110 bottle washing machine is designed for the industrial washing of returnable glass bottles in beverage production lines. The machine is equipped with 25 bottles per row and has a rated capacity of up to approx. 28,000 bottles per hour. The machine can process bottle formats from 300 ml up to 1,000 ml, making it suitable for breweries, mineral water producers, soft drink producers and other returnable bottle operations. The washing machine is mainly built in stainless steel, with an insulated stainless steel caustic bath and steam heating system. The machine will be delivered completely reconditioned. The reconditioning scope includes the bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel. A test run is also included. The machine is offered with Siemens S7 PLC control and is available as a reconditioned machine at a special price. TECHNICAL DATA Manufacturer: Krones Type: KES-2-4-312/25-110 Machine Type: Bottle washing machine Year of Manufacture: 2004  Capacity: approx. 28,000 bottles/hour  Bottle Rows: 25 bottles per row Bottle Formats: approx. 300 ml up to 1,000 ml Control System: Siemens S7 PLC Heating System: Steam heating Construction: Mainly stainless steel, insulated stainless steel caustic bath Bottle Cell Pitch: 110 mm Machine Cell Material: Polypropylene Bottles per Carrier: 25 pcs Total Bottle Carriers: 274 pcs Minimum Control Range: approx. 12,000 bottles/hour Maximum Control Range: approx. 35,000 bottles/hour Electrical Supply: 400 / 230 V, 3-phase, 50 Hz Control Voltage: 24 V DC Empty Weight: approx. 45,000 kg Operating Weight: approx. 87,000 kg Machine Length: approx. 11,766 mm Machine Width without Attachments: approx. 3,136 mm Machine Height without Floor Clearance: approx. 3,200 mm Water Consumption in Operation: approx. 6.38 m³/h Water Consumption per Bottle: approx. 0.22 l Main Chain: approx. 4 years old, will be reconditioned Reconditioning Scope: Bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel Test Run incl. Delivery Terms: EXW, unpacked Bsdpfjy Ul N Hsx Adcown

Condition: good (used), functionality: fully functional, 2.5 HP motor, max. cutting height approx. 45 mm, saw blade diameter approx. 180 mm, depth to stop approx. 500-530 mm, with attached dust extraction system, Bodpfxoy Ula So Adcewn rear stop table, support brackets/support table, pneumatic pressure beam/workpiece clamping, available for collection Shipping possible for an additional charge! Due to the age of the used machine, the warranty is excluded when sold to commercial customers.

Condition: used, axle configuration: 1 axle, first registration: 02/1999, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 1999, Equipment: ABS, tail-lift, = Additional Options and Accessories = - Tail lift = Remarks = Bwedpfoxzy Tdex Adcjn Number of axles: 1, Unladen weight: 9,480 kg, Gross weight: 22,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, Body build year: 1999, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Maxima2, Refrigeration unit: Diesel/electric, Operating hours / electric: 1,678, Operating hours / diesel: 9,338, Type of cooling: Chilling, Axle type: ROR, Tail lift, Tail lift design: Rear platform, Tail lift capacity: 1,500 kg, Tail lift material: Steel, Battery for ramp = Further Information = General Information Cab: Day cab Licence plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tyre size: 275/70R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left inside: 14 mm; Tyre tread left outside: 14 mm; Tyre tread right inside: 14 mm; Tyre tread right outside: 14 mm Weights Unladen weight: 9,480 kg Payload: 12,520 kg Gross vehicle weight (GVW): 22,000 kg Functional Tail lift: Rear platform, 1,500 kg Refrigeration unit: Diesel and electric (9,338 operating hours diesel; 1,678 electric) Environment Emission class: Euro 0 Condition General condition: Fair Technical condition: Fair Optical condition: Fair Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Easy! • Large and fast-changing stock • Recognizable quality • Good prices • Fair business practice • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The certainty of “recognizable quality” • And more…. Please visit our website for special offers and complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,352 h, load capacity: 4,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200x50-10, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 10,400 kg, empty load weight: 6,400 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,620 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, sideshift, COMBILIFT C4000 – 2016 | 4352 MTH | DIESEL | DUPLEX 4050 mm Ready to work from day one – no investment, no risk --- ### Why this forklift? Are you looking for a machine that will not stop your production? ⚙️ This COMBILIFT C4000 is a proven unit after a full service – ready for immediate operation, with no hidden costs. ✔ Fully serviced (oils, filters, complete inspection) ✔ Technical & visual condition: like new ✔ Only 4352 MTH – low operating hours ✔ New tyres – no additional investment required --- ### Key specifications ✔ Capacity: 4000 kg ✔ Diesel drive ✔ Duplex mast – 4050 mm ✔ Fork positioner: 3100 mm ✔ Forks: 1100 mm ✔ Full cabin --- ### Technical details ✔ Year: 2016 ✔ Weight: 6400 kg ✔ Load centre: 600 mm ✔ Lifting height: 4050 mm ✔ Dimensions: * Length: 1230 mm * Width: 2620 mm * Height: 2400 mm ✔ Tyres: super elastic (new) ✔ Equipment: cabin, wide fork positioner ✔ Condition: * Technical: 5/5 * Visual: like new, no corrosion --- ### Ideal for ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industry Bedpoy Uyxvjfx Adcown ✔ Handling of long loads ✔ Indoor & outdoor use --- ### What you get Not just a used forklift – but a ready-to-work solution: ✔ Fully tested before sale ✔ Ready for immediate use ✔ Online presentation available ✔ Transport available --- ### Why FT LOGISTICS? We deliver machines that work – not ones that sit in the workshop. 🚀 ✔ 100+ machines available ✔ In-house service & preparation ✔ Pan-European experience ✔ Hundreds of satisfied clients

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Bodpfx Adsy Tia Tecjwn Note: The machine is in good working order. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Inspections are possible at any time by appointment. We will also be happy to answer any questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Two material handling devices Manufacturer: ICEVA Bedpjzaum Dsfx Adcewn Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!!