3100×50 mm - 4 top hydraulic cylinders

CRONOSSTECH SHSB 4R 30-550

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm Hjdpfx Ashzbipjgwsni IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2025, ZGR-3140/1,0 Our products are best quality and have certificate CE. Plate Bending Machine ZGR-3140\1,0 + additional equipment Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm Hjdpecntnksfx Agweni - Protractor - Weight: 600 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty.

Condition: new, Year of construction: 2025, ZGR-2140/1,2 with additional equipment Our products are best quality and have certificate CE. Plate Bending Machine ZGR-2140\1,2 Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 2,0 mm Cooper plate 1,7 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length Hnjdpfx Agecntllowsi - Thickness of bending bar: 20 mm - Protractor - Weight: 290 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs.

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Hedpovxbm Refx Agwsni Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface Hnjdpfx Agjwb Scmowoi • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Hnjdpfx Ajrfw Ikjgwsi Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons Hnjdexyvx Tspfx Agwei The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm Hodpfoydk D Hjx Agwjni The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: as good as new (ex-display), CNC ultra high pressure water jet cutting machine SAME /Bogacki - 2515 BA 2D -demonstration machine - Hnsdpfegq Nqbsx Agwsi travel: 2.550 x 1.550 x 200 mm Control system: BOSCH MTX Aquacut edition - CAD / CAM system - Operating PC with portable electronics. Handwheel incl. high pressure pump HB 50 incl. stainless steel working table ( 2.700 x 1.700 mm) incl. CE- safety device (light barriers) incl. splash guard (see pictures) incl. abrasive container (250 kg) incl. abrasive cutting head Allfi incl. red light laser incl. drilling unit 4mm diameter receptacle ER 16 - few operating hours

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PH3015: ( 6 Kw) New from stock We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 25 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. Hnjdpfx Ajix Nn Usgwsi - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 1,5 week. Not included. - we can offer cost also depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Coevorden Holland