Used Hydraulic 20 T Concrete Press for sale (95,019)

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Hedpfxou Nfp Ij Agujn Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m Hsdpfxeu Nfude Aguen

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm Hodpfx Agjvc Ax Nsujn throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Hedevvkmbopfx Agusn Storage location: Nattheim

Condition: new, Year of construction: 2025, C FRAME SINGLE ACTING HYDRAULIC PRESS MODEL CFSS100 /100 TON Ram Cylinder Capacity (Ton) 100 Ton / 250 Bar Min. Working Pressure (Bar) 30 Bar Max. Working Pressure (Bar) 250 Bar Main Cylinder Diameter Ø220mm * 1 Pc Auxilary Cylinder Diameter Ø 50*35 mm * 2 Pcs Table size (mm) 800x500 mm Stroke (mm) 400mm Daylight (mm) 500mm Advance Speed (mm/sec) 110 mm/sec Hsdpfx Agowbtihjuen Return Speed (mm/sec) 160 mm/sec Working Speed (mm/sec) 10 mm/sec Motor (Kw) 11 KW Pump (liters) 26 liters / 19 CC Overall Dimension (LxWxH) 1900x1700x2930mm Weight (Kg) 5,500 KG

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: Lukas, single-acting light alloy cylinder with spring return, 50 mm stroke -Type designation: HP 20/50 -Stamp diameter: 65 mm -Lifting capacity: 20 t -Number: 2 cylinders available Price: per piece -Dimensions: 140/100/H205 mm -Weight: 6.1 kg/pc. Hjdpfowtm H Dox Agusn

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 80 t, stroke length: 600 mm, table width: 600 mm, table length: 800 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, delivers reliable performance in medium and heavy-duty applications thanks to its robust frame, high capacity, and precise operating capability. Key Advantages - Rigid and vibration-free steel construction frame - High precision (≤120 microns/meter) Hsdpfoyzb Dtjx Agusn - User-friendly PLC control system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance costs Fields of Application - Metal forming - Deep drawing and forming operations - Cutting and punching operations - Assembly and pressing tasks - Automotive and related industries Standard Features - Stress-relieved steel construction frame by vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances according to ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand operation control system - Cooling system Technical Specifications – CHCP 80 - Press Force: 80 Tons - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Total Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 600 mm, table width: 650 mm, table length: 850 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CRONOSSTECH CHCP 100 C-Frame Hydraulic Press is engineered for heavy-duty manufacturing applications, featuring high tonnage capacity, a robust steel frame, and precision operation. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life with low maintenance cost Applications - Metal forming - Deep drawing and stamping - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industry Standard Features - Steel frame stress relieved by vibration technique - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand safety control system - Cooling system Technical Specifications – CHCP 100 Press Capacity: 100 Tons Stroke: 600 mm Throat Depth: 300 mm Table – Ram Distance: 700 mm Table Size: 650 x 850 mm Press Depth: 1300 mm Press Width: 650 mm Table Height from Floor: 900 mm Total Height: 2700 mm Main Cylinder Diameter: Ø220 mm Motor Power: 15 kW Weight: 8,500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused Hedpfx Agoyzb Dyjuon This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 40 t, stroke length: 500 mm, table width: 500 mm, table length: 600 mm, throat depth: 250 mm, Equipment: CE marking, documentation/manual, safety light barrier, 40 Ton C-Frame Hydraulic Press – CHCP 40 – New / 24-Month Warranty Hydraulic presses are industrial machines designed to deliver high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 40 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance for both workshops and production lines with its compact design, robust frame, and precision operation capabilities. Key Advantages - Rigid, vibration-free frame construction - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - Hydraulic and electrical equipment compliant with European standards - Long service life and low maintenance cost Application Areas - Metal forming - Deep drawing and pressing operations - Cutting and punching operations - Assembly and press-fitting processes - Automotive and related industries Standard Features - Stress-relieved steel construction via vibration method - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance per ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic centralized lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 40 Hsdpfxsyzb Dgo Agusn - Press Force: 40 Tons - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 500 x 600 mm - Press Depth: 1050 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2400 mm - Main Cylinder Diameter: Ø145 mm - Motor Power: 5.5 kW - Weight: 4500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new and unused This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 200 t, stroke length: 800 mm, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, Equipment: CE marking, documentation/manual, safety light barrier, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. Hedpfx Ageyzb Edjuon The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production conditions, offering a high tonnage capacity, reinforced heavy-duty body structure, and superior performance. Key Advantages - Heavy-duty, high-strength steel frame construction - Stable operation with vibration-relieved structure - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and stamping applications - High-tonnage die pressing - Cutting and punching operations - Automotive, defense, and heavy industry Standard Features - Stress-relieved, steel frame construction via vibration method - PLC control and touch panel - Argon welding applications - Certified welding in compliance with EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in accordance with ISO & DIN standards (≤120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic centralized lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 200 - Press Force: 200 Tons - Stroke: 800 mm - Throat Depth: 400 mm - Table – Ram Distance: 900 mm - Table Size: 750 x 1000 mm - Press Depth: 1500 mm - Press Width: 750 mm - Table Height from Floor: 1000 mm - Total Height: 2900 mm - Main Cylinder Diameter: Ø300 mm - Motor Power: 22 kW - Weight: 11,500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 18.5 kW (25.15 HP), pressing force: 150 t, stroke length: 700 mm, table width: 700 mm, table length: 1,000 mm, throat depth: 350 mm, Equipment: CE marking, documentation/manual, safety light barrier, 150 Ton C-Frame Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that deliver high force and precision for metal forming, deep drawing, blanking, and assembly operations. Manufactured by CRONOSSTECH, the CHCP 150 C-Frame Hydraulic Press is engineered for heavy industry and continuous production applications with its high tonnage capacity, reinforced frame structure, and precise operation performance. Key Advantages: • High-strength, vibration-free steel frame construction • High precision (≤120 microns/meter) • User-friendly PLC-controlled system • PARKER / REXROTH hydraulic system • SIEMENS / SCHNEIDER electrical components • Heavy-duty design suitable for industrial use • Long service life and low maintenance costs Applications: • Heavy-duty metal forming • Deep drawing and spinning operations • Die pressing applications • Cutting and punching operations • Automotive and supply industries Standard Features: • Steel frame construction stress relieved by vibration method • PLC control and touch panel • Argon welding applications • EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) • Parallelism and squareness tolerance compliant with ISO & DIN standards (≤120 microns/meter) • PARKER or REXROTH hydraulic system • SIEMENS / SCHNEIDER electrical components • Automatic central lubrication system • Two-hand safety control system • Cooling system Technical Specifications – CHCP 150 Press Force: 150 Tons Stroke: 700 mm Throat Depth: 350 mm Table – Ram Distance: 800 mm Table Size: 700 x 1000 mm Press Depth: 1400 mm Press Width: 700 mm Table Height from Floor: 950 mm Total Height: 2800 mm Main Cylinder Diameter: Ø250 mm Motor Power: 18.5 kW Hodpfx Ageyzb D Houjn Weight: 10,500 kg General Information: Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 500 mm, table width: 600 mm, table length: 800 mm, throat depth: 250 mm, Equipment: CE marking, documentation/manual, safety light barrier, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press by CRONOSSTECH is designed for reliable and consistent performance in both workshops and production lines, thanks to its compact structure, robust frame, and precise operation capabilities. Key Advantages - Rigid and vibration-free frame construction - High accuracy (≤120 microns per meter) - User-friendly PLC-controlled system - European-standard hydraulic and electrical components - Long service life and low maintenance costs Applications - Metal forming - Deep drawing and flanging processes - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industries Standard Features - Stress-relieved welded steel construction with vibration methodology - PLC control and touch panel - Argon welding applications - Certified welding according to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in compliance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 60 - Press Force: 60 Tons Hsdpfx Ageyzb Dmsusn - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 600 x 800 mm - Press Depth: 1150 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2500 mm - Main Cylinder Diameter: Ø175 mm - Motor Power: 7.5 kW - Weight: 5,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, power: 22 kW (29.91 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, table height: 955 mm, throat depth: 410 mm, working width: 3,100 mm, bending force (max.): 320 t, distance between stands: 2,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam lock) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel die Hedpfxjx Nn Eao Aguon • Backgauge X travel distance 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Descent Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank Capacity (Lt) 290 Machine Weight (kg) 14,700 Main Motor Power (kW) 22 CNC Control Unit ESA S640 CNC Axis Configuration Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Laser front safety Origin Turkey

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide uniform load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 robust slide guides - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine body designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen hydraulic unit oil temperature and system status monitoring - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guided H-type press frame - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 500 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter Hjdjx N T H Ajpfx Agusn - Stroke (Ram): 1000 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK under EN ISO 15614-1/2017, welding applications supervised by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Front Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered with heavy-duty industrial conditions in mind. The frame and main carrier constructions are stress-relieved by vibration. Thanks to bronze Zr14 slide bushings, even load distribution and high precision are achieved throughout ram movement. ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Vibrationally stress-relieved frame structure - Bronze Zr14 slide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Vibration stress relief - Welding: TÜRK-AK accredited WPQR and WPS certified EN ISO 15614-1/2017 welding applications - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER Hsdpfx Aox N T Rbegusn - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6000 mm - Approximate Press Width: 3450 mm - Approximate Press Depth: 2400 mm - Height of Lower Table from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,200 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, flow forming, shaping, and heavy-duty pressing operations. Thanks to its eight-slide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved via vibration, ensuring that loads generated during pressing are distributed evenly to maintain parallelism and squareness tolerances. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-relieved stress body structure - Bronze Zr14 slide bearings - WPQR and WPS welding applications certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components Hsdpfsx N T Rujx Aguon 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-slide H-frame press design Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1200 tons Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibro-stress-relieved Welding Application: WPQR and WPS applications certified by TÜRK-AK in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cc – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6100 mm Approx. Press Width: 3550 mm Approx. Press Depth: 2400 mm Lower Table Height From Ground: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 2,500 t, stroke length: 1,000 mm, table width: 1,800 mm, table length: 2,600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description Hjdpfx Aex N T S Eoguen The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and spinning applications that require extremely high tonnage. With its 8-guided H-frame construction, the press provides maximum rigidity during operation; parallelism and perpendicularity tolerances are reliably maintained throughout the full stroke length. The CHP 2500 model, featuring large bolster dimensions, a multi-cylinder main pressing structure, and a high-capacity hydraulic system, is specifically designed for the automotive, heavy industry, defense, and high-tonnage tooling sectors. The frame structure is stress-relieved by vibration to ensure durability and reliable long-term operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame via vibration method - Bronze Zr14 slide bearings - Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in accordance with CE standards - PLC-controlled hydraulic system - 7” touchscreen panel (DELTA) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 tons Moving Bolster Size: 1800 × 2600 mm Fixed Bolster Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Weld Stress Relief: Vibration method Welding Certification: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) Max. Operating Pressure: 250 bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Bolster Fast Descent Speed: 150 mm/s Moving Bolster Drawing Speed: 12 mm/s Moving Bolster Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,500 mm Approx. Press Width: 3,950 mm Approx. Press Depth: 2,600 mm Lower Table Height from Floor: 1,500 mm Primary Filling Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 120 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 40 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and flanging operations. The 8-side guided H-frame structure guarantees maximum rigidity throughout the pressing cycle, maintaining stable parallelism and perpendicularity tolerances over the entire stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton cushion ram (blankholder), specifically designed for precision deep drawing and flanging operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 sliding guides - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, H-frame body with 8 sliding guides - Frame Material: St52 – ERDEMİR grade - Slide Bearing: Bronze Zr14 - Capacity (Ram): 100 Tons - Capacity (Cushion/Blankholder): 40 Tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 600 mm - Stroke (Cushion): 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress-relieving - Welding: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (certified welding coordination engineers supervise per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Flanging Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 Hedpfxsx N T Uys Agujn - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Distance from Floor to Lower Table: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 400 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 150 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The H-frame structure with 8 guideways provides maximum rigidity during the pressing cycle, and maintains parallelism and perpendicularity tolerances consistently over long strokes. The CHSP 400/150 model, with a 400-ton main ram and 150-ton blank holder ram (pot), is designed for deep drawing and forming applications that require high tonnage. The frame is stress-relieved by vibration to ensure long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guideways - Stress-relieved frame via vibration - Bronze Zr14 guide slippers - WPQR and WPS approved welding by TÜRK-AK accredited certification (EN ISO 15614-1:2017 / EN ISO 14731) Hedpfx Agsx N Uhhjujn - Design and manufacturing conform to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and blank holder (pot) stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filtration contamination warning - Monitoring of hydraulic unit oil temperature and system status on display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, H-frame body with 8 guideways Frame Material: St52 – ERDEMIR Guideway Liners: Bronze Zr14 Capacity (Ram): 400 Tons Capacity (Pot): 150 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1000 mm Stroke (Pot): 350 mm Min. Open Height: 100 mm Max. Open Height: 1100 mm Stress Relieving: Vibration method Welding Application: WPQR & WPS approved by TÜRK-AK accreditation EN ISO 15614-1:2017 (Welding applications are supervised by certified "welding coordination engineers" per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Rapid Descent Speed (Movable Table): 150 mm/s Forming Speed (Movable Table): 12 mm/s Return Speed (Movable Table): 170 mm/s Forward Speed (Pot Table): 30 mm/s Main Cylinder Internal Diameter: Ø450 mm – Ck45 Pot Cylinder Internal Diameter: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,500 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,400 mm, retraction force: 500 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1500/500 Hodpfsx N Ukiex Aguon H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for maximum frame rigidity, precise parallelism, and long-lasting operation in high-tonnage deep drawing applications requiring large bolster dimensions. Thanks to the 8-guide H-frame body, the ram and table movements remain controlled and stable throughout the pressing process. The CHSP 1500/500 model, with 1500-ton main ram and 500-ton blank holder capacity, is developed for large-dimension dies, deep drawing, and precise forming operations. The vibration stress-relieved welded steel frame delivers high durability and reliability under heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame design • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic contamination warning for the filter • Monitoring of hydraulic oil temperature and system status via display • Off-line filtering and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guide H-frame design Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 tons Moving / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, power: 18.5 kW (25.15 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, throat depth: 410 mm, working width: 3,100 mm, bending force (max.): 220 t, distance between stands: 2,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA wheeled) • Narrow lower beam (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower beam for multi-channel tooling • Backgauge X travel up to 1000 mm • AKAS or DSP front laser light safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/s) 180 Return Speed (mm/s) 140 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 11300 Main Motor (kW) 18.5 CNC Control Unit ESA S640 CNC Axes Y1-Y2-X-R (4-Axis) Hsdpfx Agsx Nnzbouon Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wheeled) Safety System Front laser safety Origin Turkey

Condition: new, Year of construction: 2025, power: 15 kW (20.39 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 935 mm, throat depth: 410 mm, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • 4-axis CNC control Y1, Y2, X, R (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo-driven back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support arms • Manual crowning system (Original WILA wedge type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel, V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge configurations starting from X+R • ROLLERI Roll200 hydraulic die clamping Hedpfx Agox Nn U Ujuen • WILA hydraulic upper and lower die clamping • Large lower table for multi-channel dies • 1000 mm X-axis back gauge travel • AKAS or DSP laser front safety system • Additional back gauge fingers • Additional back gauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 175 Bending Length (mm) 3100 Distance Between Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 180 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (Lt) 180 Machine Weight (kg) 9700 Main Motor (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Country of Origin Turkey

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 500 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, they provide high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 material used in slide bearings ensures long service life and stable operation. Highlighted Advantages - 8-guideway H-frame design - Vibration stress-relieved steel construction - Welding applications in accordance with ISO standards - PLC control with touchscreen interface - Operator safety and process stability oriented design ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK accredited WPQR & WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Tonnes Moving Table Size: 800 × 1000 mm Hodox N Tx Sopfx Agusn Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/mtr Perpendicularity Tolerance: 60 micron/mtr Ram Stroke: 500 mm Min. Clearance: 100 mm Max. Clearance: 600 mm Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified welding process accredited by TÜRK-AK (certified welding supervised by engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 3400 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tonnes Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 600 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions developed for sheet metal forming, straightening, assembly, and die stamping applications, offering high rigidity. Thanks to its 8-guided H-frame structure, loads occurring during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is specifically designed for medium to high-tonnage applications, providing reliable performance and long service life. CHP Series – Structural Features The CHP series presses are engineered considering heavy-duty operational conditions. The main frame and supporting parts are stress-relieved by vibration. Bronze Zr14 guide bushings ensure smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guides - Stress-relieved main frame and carrier parts by vibration - Bronze Zr14 guide bushings Hsdpfx Aox N T D Uogujn - WPQR & WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination indicator - Monitoring of hydraulic unit oil temperature and system status via the screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame press with 8 guides Frame Material: St52 – ERDEMİR Guide Bushing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Rapid Down Speed (Movable Table): 150 mm/sec Bumping Speed (Movable Table): 12 mm/sec Return Speed (Movable Table): 170 mm/sec Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 3800 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 80 t, stroke length: 500 mm, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 30 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 80/30 ton four-column hydraulic deep drawing press is an industrial press solution designed for high-precision metal forming, deep drawing, and die testing applications. It features a rigid four-column body structure for superior accuracy and repeatability. The St52-grade steel frame is subjected to stress relief via vibration, ensuring excellent parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and die cushion systems operate independently; stroke and pressure adjustments can be precisely controlled via the operator panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-based control, this press ensures long-lasting, safe, and energy-efficient performance. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts. This model is ideal for small- and medium-scale serial production, die trials, and precision forming processes. Key Advantages - Rigid four-column press body design - Independent stroke and tonnage settings for ram and die cushion - Full control via touchscreen panel - High repeatability and precision - Low maintenance cost, long service life Areas of Application - Metal forming operations - Deep drawing processes - Die trial and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column BODY MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 Tons CAPACITY (DIE CUSHION): 30 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 500 mm STROKE (DIE CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: By vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar Hjdpfsx N Ultex Aguon TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec DIE CUSHION FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 200 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3300 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (Adjustable from HMI) RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable from HMI SYSTEM & PRESS STATUS DISPLAY: Viewable on HMI DIE MEMORY: Adjustable from HMI LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 Tons