Used Infranor Smve 1007 Elektronikmodul for sale (96)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Gbsdpfjyug Hxox Anzon The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, mileage: 65,785 km, power: 125 kW (169.95 HP), first registration: 11/2023, fuel type: diesel, overall weight: 3,025 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,023 mm, total height: 1,977 mm, loading space length: 2,602 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1007. PJ59452 ----EQUIPMENT * Towbar preparation kit - Electrical pre-wiring for towbar, harness, 13-pin socket, and trailer module for retrofitting a towbar * Fixed, heated rear window - Interior mirror - Partition wall with window * Rear window wiper including washer nozzle and automatic operation when reverse gear is engaged * 70-liter fuel tank * Metallic paintwork * Technology Package 5 - Exterior mirrors with indicators, electrically adjustable, heated, and power-folding - Audio system with 13 multifunction display, Ford SYNC 4 with navigation. Blind spot assistant incl. CTA, rear emergency brake assist, Pre-Collision Assist, camera and radar-based, Driver Drowsiness Alert, Lane Keeping Assist, Lane Change Assist, Traffic Sign Recognition, Wrong-way Alert, Park Pilot System front/rear, Keyless Start & Go, Intelligent Speed Limiter with speed display, Rear View Camera, Steering wheel in Sensico (leather-look) * Radio: Ford audio system with 13 multifunction display and Ford SYNC 4 including navigation - Digital Radio Reception DAB/DAB+ (Digital Audio Broadcasting) - 13 TFT multifunction display - Integrated control panel and audio remote on steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa built-in voice assistant * Socket: 12-volt outlet in the cargo area (D-pillar) * Partition wall (metal) with window * 2-stage unlocking for passenger compartment and cargo area (rear doors/hatch or tailgate) prevents locking of opened doors * Anti-lock braking system with electronic brake-force distribution (EBD) * Passenger airbag * Driver airbag * Exterior mirrors with integrated indicators - electrically adjustable, heated, and automatically folding - including electric front windows with quick-down/up function for driver and passenger side * Exterior mirror housings in vehicle color * Battery: H7 AGM single battery * On-board computer with fuel consumption and mileage data (e.g., remaining range) and outside temperature display * Flat roof * Roof console * Rear double doors with 180° opening angle (without windows) * Tachometer * Third brake light * Electronic stability program (ESP) - Hill start assist - Emergency brake assist (EBA) - Traction control system (TCS) * Front electric windows - with quick-up/down function for driver and passenger * Electronic parking brake * Ford Key Free system - incl. Ford Power Start function (keyless entry/start) * FordPass Connect - incl. live traffic information and 5G Wi-Fi hotspot - Information on current vehicle status/location and remote control of selected vehicle functions via FordPass app - Real-time traffic updates (in conjunction with navigation system) - Wi-Fi hotspot (up to 5G/LTE for up to 10 devices) - For more information on FordPass Connect see ... * Heated windscreen * 8-speed automatic transmission * Grab handles, driver and passenger side * Lockable glove compartment * Front interior lighting with delay function Gedpfx Anexrxawjzjbn * Automatic air conditioning at front - with recirculation heater - with R-1234yf refrigerant * 3 headrests * LED headlights - LED high beam - LED low beam - LED daytime running lights incl. integrated front LED indicators - Static cornering lights - High beam

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Gbsdpsvu Hd Tofx Anzsn Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, Touchscreen, keyboard, mouse For sale: operator panel removed from a Finn-Power L6A CO2 laser. Touchscreen, keyboard, mouse. Manufacturer: BECKHOFF Manufacturer’s code: CP6802-1007-0010 / 387162-010 Touch screen: Siemens / 1P 6FC5203-0AC00-1AA0 / SINUMERIK 840 D CNC KEYBOARD (AT) OP032S Gsdpfx Ansy Tt R Aozobn Price: 1000 EUR. If you have any further questions, we will be happy to answer them.

Condition: good (used), Technical data for the wide span shelf truss: Shelving system: Jung Heinrich Type: G Gbedpfx Aogqu H Nenzsn Included in delivery are: 01x wide span shelf truss, used Material color: RAL 1007 yellow Z-profile: 50 x 30 mm agraffe: 3 HK (hooks) clear width: 2.145 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Design: End beam Bracket: 4 HK (hooks) Clear width: 1,350 mm 02x Locking pins, used Finish: Fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating horizontal braces. Your contacts in our company: Mr. Andre Evering Gbjdpeymlt Iefx Anzon Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transportation or shipping of the item is subject to additional costs, which can be requested from us separately depending on the place of delivery and/or scope of delivery.

Condition: good (used), Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x pallet rack traverse, used Material color: RAL 1007 daffodil yellow Box profile: 80 x 50 mm Traverse type: AUF'B'E0488 Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of traverses 1,200 kg with evenly distributed load 02x locking pins, used Design: completely galvanized To secure the longitudinal beams To prevent accidental lifting Your contact person in our company: Gbsdpfxev Ipprj Anzon Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x pallet rack beam, used Material color: RAL 1007 daffodil yellow Gsdpfx Ansymffqjzobn Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Connector: 4-hook (claw) Clear width: 1,350 mm 02x safety pins, used Version: fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating bracing in a horizontal direction Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipment of this item is subject to additional costs, which can be provided separately depending on the place of delivery and scope of delivery.

Condition: new, Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x pallet rack beam, new Material color: RAL 1007 daffodil yellow Box profile: 140 x 50 mm Beam type: AUF'B'E0444 Connector: 4 HK (hooks) Clear width: 2,700 mm Godsyla R Sepfx Anzjbn 02x safety pins, new Design: fully galvanized For securing the longitudinal beams Prevents unintentional lifting out Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Further transport or shipment of this item can be arranged at additional cost, which can be requested from us depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Specifications for Pallet Rack Beam: Racking System: Jungheinrich Type: MPB Included in delivery: 01x Pallet rack beam, used Color: RAL 1007 Daffodil Yellow Box profile: 125 x 50 mm Beam type: AUF'B'E 0485|15 Connector: 4 HK (hooks) Clear width: 2,700 mm 02x Safety pins, new Design: fully galvanized For securing the crossbeams Protection against unintentional lifting Gjdpfx Asyl Tygsnzebn Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Transportation or shipping of this item is possible at additional cost, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet rack beam: Racking system manufacturer: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,700 mm Maximum load per pair of beams: 1,600 kg, with evenly distributed load. 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional removal Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Gsdpfx Ajymdaaonzobn This item is offered for collection only. Should additional transport or shipping be required, this will incur extra costs, which can be provided separately depending on the delivery location and scope. Please contact us for a quote.

Condition: used, mileage: 3,01,150 km, power: 129 kW (175.39 HP), first registration: 02/2015, fuel type: diesel, number of seats: 34, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1007 * Otokar Navigo U * Registered 02/2015 * EURO 6 * Automatic (1 / 2 / 3 / D / N / R) * Retarder * Wheelchair lift Gbedpjpbidkjfx Anzon * Air conditioning * Customer service - new in May 2024 (oil change, diesel filter, oil, ...). * Double glazing * 34 seats * 6 standing places for scheduled services * Luggage rack, jet ventilation, stop buttons * Folding tables * 100 km/h approval * Test report, TÜV available * ... * All information without guarantee * We reserve the right to sell the vehicle prior to delivery * Please refer to our terms and conditions

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, The images shown are archive photos; the vehicle may still be in use! Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights 2 white/red rear marker LED lights LED work lights on both sides; 2 additional work lights integrated into the rear Godpfx Aneyylapezsbn Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Roll tarp: RAL 7038 Agate Grey

Condition: excellent (used), Year of construction: 2022, Column-mounted slewing jib crane, Vetter, 1,500kg, 6m jib, 6m height – unused - : Price ex-location: only €13,950 (net)! Manufacturer: Vetter Model: Meister M Year of manufacture: 2022 Rated capacity: 1,500kg M15-6.0 Column-mounted slewing jib crane designed in accordance with the EC Machinery Directive, relevant EN 13001 standards, and VDE regulations, suitable for outdoor use (wind force 4, 20–28 km/h; moderate breeze). ID No.: 50010400 EN 13001 HC2 S3 HD2 Slewing range: 360° ∞ Max. permitted hoist weight: 180kg Max. permitted hoisting speed: 16m/min Jib outreach: 6,000mm Underside of jib: 6,000mm Overall height: 6,470mm Gedpjyhxk Hefx Anzebn Bolt circle diameter: 630mm Base flange diameter: 710mm Beam flange width: 180mm Front clearance: 250mm Inside clearance: 915mm Support strut length: 1,540mm Max. vertical load: 32kN Max. moment: 11,575kNcm Weight: 1,756kg Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Finish: Pipe column for outdoor use (corrosivity category similar to C3), steel grit-blasted with a coating in narcissus yellow RAL 1007, specified layer thickness 120 μm VETTER AnchorFix system: set includes anchor bolts, nuts, washers, locknuts, and steel template. Bolt circle (DL) ø 630 mm. Foundation edge length (G) 2,400 × 2,400 mm, foundation depth (Gt) 1,000 mm. Flat cable power supply with cable trolley, C-rail and tension arms for mounting on beam. Short weather protection canopy size 2, clamp-on for jib, provides shelter for hoist in idle position. Robust, hot-dip galvanized steel tube construction with weatherproof, plastic-coated tarpaulin, color rapeseed yellow RAL 1021. Mandatory for outdoor operation. Usable up to wind force 7. Dimensions (L × W × H): 1,320 × 1,520 × 1,042 mm Electric chain hoist VETTER type electrolift® SiXX Model: SiXX8F Mechanism group FEM 9.511 2m Mechanism group ISO M5 Number of falls: 2 Rated capacity: 1,500kg Lifting height: 5,351mm Headroom: 649mm Lifting speeds: 4 / 1m/min Hoisting motor: 1.45/0.36kW Duty cycle: 40/20% Dead weight: 65kg Protection class: IP55 Electric trolley type SiXX-EF-22-200 Travel speed: 24/6m/min Trolley motor: 0.2/0.05kW Duty cycle: 40/20% Dead weight: 19kg Flange width: 180mm Detailed operating manual and technical drawing available on request as PDF Previous new price: €18,436 (net) Condition: very good (this crane is new and unused – classic incorrect order) Availability: immediately Location: 30419 Hannover

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: Jungheinrich Type: MPB Scope of Delivery Includes: 01x Pallet Rack Beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 125 x 50 mm Beam type: AUF'B'E 0485|15 Gbedpfsylx Naex Anzsn Connector: 4 HK (hooks) Clear width: 2,700 mm Maximum load per pair of beams: 2,400 kg, with evenly distributed load 02x Locking Pins, new Version: fully galvanized For securing the crossbeams Against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information on the Item: This item is offered for collection only. Any desired transport or shipping of this item will incur additional costs, which can be requested separately from us depending on delivery location and/or scope of delivery.

Condition: used, Year of construction: 2015, functionality: fully functional, sheet thickness (max.): 2 mm, overall weight: 2,600 kg, total length: 1,000 mm, input voltage: 480 V, We offer this used Prinzing BEA2-S riveting and flanging machine, year of manufacture 2015. Type: BEA2-S Material thickness: 1.5 mm Length: 1000 mm Serial number: 1007 Year of manufacture: 2015 Weight: 2600 kg Voltage: 480 V Frequency: 60 Hz Power: 19.5 kW Current: 40 A Gbedpoy Ev Smjfx Anzen The machine is already disassembled. If you have any questions or need further information, please don't hesitate to send us a message or call us.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter Gsdpfx Ajd Dkzrsnzebn -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg Gedpfxjxak D Ro Anzobn - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: like new (used), functionality: fully functional, mileage: 500 km, power: 129 kW (175.39 HP), first registration: 04/2025, fuel type: diesel, empty load weight: 3,300 kg, overall weight: 7,490 kg, tire size: 205/70R17,5, axle configuration: 4x2, wheelbase: 2,800 mm, next inspection (TÜV): 04/2025, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 3,000 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, differential lock, fog lights, navigation system, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, winter tires, FUSO Canter 7C18 MAYTEC Roll-off Tipper Payload depending on container approx. 3.8 t 3,500 kg trailer load Chassis warranty 3 years up to 100,000 km from first registration Driver comfort suspension seat with horizontal suspension (standard) Fuel tank 100 L (standard) Traction tires on rear axle (standard) Lane departure warning system (standard) Central locking with 2 remote controls (standard) Overhead storage compartment (standard) Lockable glove box (standard) Immobilizer with transponder (standard) Storage behind the seat (standard) Driver’s seat armrest (standard) Fog lights, halogen (standard) Continuously adjustable instrument illumination (standard) Daytime running lights, automatic (standard) Rear axle stabilizer (standard) Digital tachograph (standard), without tachograph inspection ABS with electronic brakeforce distribution (standard) Spare wheel / spare rim (standard) Electric windows (standard) Electronic Stability Program (standard) Autonomous Emergency Braking System (AEBS) Lane Departure Warning System (LDWS) LED main headlights (LH9) Reversing alarm Light sensor Driver airbag (SA5) (standard) Limited-slip differential lock (A86) Rear underrun protection (C01) Body mounting provisions (CR8) Front license plate holder (C60) Batteries, 2 x 12V /100 Ah, maintenance-free (EE9) 7" touchscreen radio/audio system incl. Apple CarPlay (EF3) Reversing camera Trailer socket 12V, 13-pin (EX5) Heated exterior mirrors (F62) Mirror bracket, medium incl. wide-angle mirror (FM9) Frame cover behind the cab (GU8) Automatic climate control (H07) Reversing alarm (JW0) Exhaust system cover (KA6) PTO (200Nm, 31kW), operated via vacuum pump, for direct-mount hydraulic pump (NQ7) Engine spec, Euro VI OBD Step E (OM5) Tow bar with ball coupling / 13-pin electric kit (QQ0) AdBlue tank cover (OU3) Construction special equipment (ZT4) Hand throttle (VA6) Mounting and installation of hand throttle (VB1) Canter safety package incl. rubber floor mats (YT7) Valve extensions (YT8) (50,500,--) MAYTEC ROLL-OFF SYSTEM Maytec Roll-off System AR-L55-2 Serial No. A M08-K-2-75NA-2800 Steel construction, sandblasted, primed, and painted Frame and hydraulic cylinders, umbra grey, RAL 7022 Lifting unit, narcissus yellow, RAL 1007 Operation via cable remote control inside cab or beside the vehicle Load-holding valves on all hydraulic cylinders Emergency stop function Maintenance-free guide rollers made of polyamide Automatic locking of superstructures in transport position Low construction height for a low center of gravity Side underrun protection right side 9535 Side underrun protection left side 9534 Gbedpswd Ttljfx Anzon Full TÜV acceptance P01-001 9301 Aluminium tank cover 9510 Support bracket behind cab with 2 holders for tool cabinets 9530 Aluminium tool cabinets incl. mounting on support bracket (2 pcs) Height 780 mm, depth 500 mm, width 330 mm Intermediate floor for self-assembly 9531 with aluminium angle (21,800 ,--) Optional equipment: Standard drop side body Type 2 – 1980 B No. 0260 3090x1980 mm EURO 4850,--

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area Gbodpfxexttc Aj Anzjn * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: good (used), Year of construction: 2019, 2.87 meter Jungheinrich pallet racking with 2 levels Jungheinrich pallet racking base bay with a total length of 2870 mm. The bay has two levels (incl. floor space) with two cross beams (2700 mm). The bay can store 3 Euro pallets next to each other and 6 pallets (incl. floor space) on top of each other The bay offers space for 6 Euro pallets Gbedpfx Aewyc S Asnzsn Manufacturer: Jungheinrich Type: MPM Overall length: 2870 mm Shelf height: 3000 mm Shelf depth: 1100 mm Clear bay width: 2700 mm Number of storage levels: 2 (incl. floor space) Number of bays: 1 Max. shelf load: 3000 kg Max. bay load: 7100 kg Pallet spaces: 6 Racking according to standard: DIN EN 15512 Uprights surface: powder-coated Uprights RAL color: RAL 5010 gentian blue Uprights type: B'12 Cross beam RAL color: RAL 1007 daffodil yellow Cross beams surface: powder-coated Scope of delivery: 02 x Jungheinrich pallet racking uprights blue 3000 x 1100 mm 02 x Jungheinrich pallet racking cross beams yellow 2700 x 140 x 50 mm 04 x locking pins Further articles - new and used - can be found in our store! International shipping costs on request!