Used Jaespa W320-Az / P for sale (41,420)

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully until the end!! The pump is not suitable for: Water, food industry, or non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are more appropriate. Attention!! The pump does not have explosion protection certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal is also not EX-certified! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chromium-nickel steels are no longer sufficiently corrosion-resistant. It is especially used where chloride-induced pitting and crevice corrosion or stress corrosion cracking could be an issue. Alloy 59 is used for: environmental technology, chemical industry (chemical processes involving oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Grade 2.4605 is predominantly used in the chemical industry, the pulp and paper industry, and in flue gas desulphurization plants. Excellent resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, especially to mixed sulfuric/hydrochloric acid environments. Iisdpjigqutjfx An Dsa Typical applications include: - Plant components for organic chemical processes with chloride-containing media, especially when catalysts based on chlorides are used - Multipurpose installations in the chemical industry - Plant parts in the fine chemical and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuel power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brine applications - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulphuric acid coolers - Piping in geothermal power plants - Components in flue gas desulphurization units Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal reconditioned by specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,597 h, load capacity: 5,000 kg, lifting height: 4,450 mm, free lift: 840 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 1,260 mm, fork length: 1,360 mm, empty load weight: 8,700 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,200 mm, Side loader Load center: 700 Fork width: 160 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for use and fully operational Technical condition: Very good Front tire type: Pneumatic Front tire size: 27x10-12 Rear tire type: Pneumatic Rear tire size: 27x10-12 Description: In addition to this Battioni Pagani model, we have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing on favorable terms are always possible. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly advise you in detail about this HT5KU. P.S.: Our master workshop specializes in the repair, maintenance, overhaul, and custom manufacturing of forklifts from 8 tons upwards. We can also offer your vehicle for sale with us on consignment. 1x NIVO fork; telescopic forks 1360 / 2360 mm Iedpfx Ajwttrgon Doia Heater, full cabin, Platform height: 820 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M6 Endermolab 1I or opt. 2I Beauty and Therapy Device Body and Facial Device (new) Endermo Lift (Ergo Lift) Latest world patent for facial treatments Tested by certified trainer (Beauty and Therapy) Completely refurbished and overhauled Recently serviced New hose Overhauled KM80 Roll Head from 2013 New KM70 Roll Head or Therapy Head TR50 New KM50 Roll Head New controller from previous owner Device has been recently overhauled New valves, seals, and hose New capacitors, new filters, etc. Ijdjcgy Hdjpfx An Djia Original price: €39,980 net Suitable for Endermologie Body and Endermologie Face treatments Optional upgrade to Ergo Lift patent 2014 for an additional €2,000 Lipo-massage and Endermolift technology performable Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual specifications Optional starter package (bodywear, filters, claps, flyers) A premium device in the upper class of the Medical Beauty segment! No low-quality devices like ultrasound or radiofrequency products from China— Ergodrive, Ergo Lift included 12-month warranty from date of purchase, valid only with a 2-day training course including final exam Start your Endermologie season now! 100% natural mechanostimulation ensures a painless yet intensive treatment. A highly addictive procedure. Customers seek to strengthen and firm connective tissue, reduce cellulite, and men seek abdominal firming. My clients generally lose 2 dress sizes, and it has been scientifically proven to stimulate metabolism. Hooded eyelids and double chin can be positively affected with Endermolift. This patented procedure is as precise as a Swiss watch. For the past 18 years, I have used and traded older LPG pre-owned devices; the results of the latest generation led me to add the latest Integral and its sister model Endermolab as well as the Alliance model to my offering. We support you with application questions even after purchase. Facts about LPG 40 years of experience Worldwide market leader in the medical beauty segment European company 175 documented clinical and scientific studies 80,000 devices produced 100 countries presence 12 million treatments performed 200,000 treatments daily Leasing available through our partner bank E.g. from €399 per month Images for reference—constantly new devices available We value our customers even after the sale! Nationwide references available Doctors, therapists, beauticians, etc.

Condition: like new (used), Year of construction: 2003, operating hours: 6,762 h, functionality: fully functional, type of input current: three-phase, Equipment: compressor, documentation/manual, Saddle stitcher Müller Martini 8 station+Stacker Apollo 1540 -Year 2003/2005 Iisdpfxeyylnms An Doa USED, AS NEW CONDITIONS! - WITH ONLY 6762 WORKING HOURS Complete of instruction and electric manuals in english.

Year of construction: 1997, condition: used, We offer this used dowel drilling machine P. BACCI, year of manufacture 1997. Model: Serial number: 2826 Year of manufacture: 1997 Voltage: 380 V Frequency: 50 Hz Power: kW Weight: 370 kg Iiedpfx Ansyx S Uko Dea If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Year of construction: 2000, condition: used, We offer this used machine P. BACCI TSG 2T, year of manufacture 2000. Model/Type: TSG 2T Serial number: 3074 Year of manufacture: 2000 Iisdpfsyx S T Tex An Doa Voltage: 380 V Frequency: 50 Hz Motor power: 3.75 kW Weight: 970 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2001, power: 25 kW (33.99 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 5,000 kg, We offer this used P. BACCI DOUBLE vertical woodworking machining centre, year of manufacture 2001. Model: DOUBLE Serial number: AB001 Year of manufacture: 2001 Voltage: 380 V Frequency: 50 Hz Power: 25 kW Weight: 5000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us. Iiodpfx Ansyx S Sve Doa

Year of construction: 1997, condition: used, functionality: fully functional, We are offering this used contouring machine P. BACCI FC8-2500, year of manufacture 1997. Manufacturer: P. BACCI Model/Type: FC 8-2500 Serial number: 1346 Year of manufacture: 1997 Voltage: 380 V Frequency: 50 Hz Power: 30.5 kW Weight: 5100 kg Iodpfx Anjyx S Sco Dsia If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: SEW-Eurodrive, servo geared motor with brake -Type: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 -Motor: Speed: 4500 / max: 9000 rpm -Gearbox: i= 18.94 -Shaft: Ø 20 x 40 mm -Protection class: IP65 -Brake: 2.4 Nm -Technical data: see photo of the nameplate -Number: 7x geared motors available -Price: per piece -Dimensions: 455/180H170 mm Iijdjxt D Hxspfx An Dsa -Weight: 10.5 kg/pc.

Condition: used, maximum load weight: 14,260 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2021, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 710 mm, Equipment: ABS, As new condition! Equipment: - Construction material flatbed trailer - Internal cargo space dimensions: 7,200mm x 2,480mm x 710mm - Raised front wall - Lashing bar with tie-down holes on both sides - Duomatic connector - Storage box - "BPW" axles with disc brakes - Additional LED work lights Other details: - Original delivery in Germany - 1 previous owner - Payload: 14,260 kg as per registration certificate Since 1972, your reliable partner for vehicles and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles including transporters, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we will be happy to prepare an individual offer! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we are happy to arrange an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your “new” commercial vehicle can be arranged by our external partners at extra cost. The details given in advertisements, online, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed features. The seller accepts no liability/warranty for typographical or data transmission errors. Listed equipment/features may need to be checked separately. Subject to error and prior sale. Iiodjyyrzmjpfx An Dja

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: WFDFLT21801013661, empty load weight: 3,500 kg, maximum load weight: 14,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2024, total length: 9,770 mm, total width: 2,550 mm, total height: 1,150 mm, suspension: air, tire size: 265/70 R19,5", color: grey, Year of construction: 2024, The images shown are archive photos; the vehicle may still be in use! Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (basic version) approx.: 3,500 kg +/- build tolerance Payload approx.: 14,500 kg Axle load: 9,000 kg Overall length approx.: 9,770 mm Maximum overall width: 2,550 mm Roller track length approx.: 7,080 mm Loading height approx.: 1,150 mm Drawbar height approx.: 800 mm Drawbar length approx.: 2,500 mm Chassis: Turntable Waste Disposal Trailer Fine grain steel welded construction 2 longitudinal beams with cross members, upper side of longitudinal beams designed as a container roller track in wear-resistant version, loadable from the rear, with run-up slope. Suitable for roll-off containers of 6.0/6.5/7.0 m. Container locking system: - 2 pairs of locking hooks recessed in the floor - Pneumatic operation The container locking system is a 2-point, internally acting mechanism; containers with interior webs cannot be locked. (Suitable for transporting roll-off containers with subframe according to DIN 30722) (Roll-off containers are loaded and unloaded from the rear.) Heavy-duty turntable with robust ball bearing ring Wheel chocks with holder Side underrun protection made of aluminium Rear underrun protection made of steel Half shell mudguards Lockable plastic toolbox, width=600 mm / height=425 mm / depth=460 mm Open storage box for container net Turntable trailer coupling Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension: SAF disc brake axles "Axle/chassis laser alignment" for reduced tire wear and fuel consumption Air suspension with lift & lower valve Wheels and Tires: 265 / 70 R 19.5" (manufacturer's choice) 8 steel rims in twin arrangement, factory silver Brake System: 2-line compressed air brake system Spring-loaded parking brake Iijdpfeyxq H Esx An Dja Drive-away lock: When the container lock is open, the spring-loaded parking brake is activated. Vehicle – Driving Stability System: Duomatic coupling at the front with connecting line to the truck, 24V EBS electronic braking system with EBS plug at front, with connecting cable Note: The trailer may only be towed by vehicles that can ensure the functionality of the ABS! Electrics: 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connecting cable 2 additional LED work lights at the rear, operated via reverse light The images shown are archive photos; the vehicle may still be in use!

Year of construction: 2015, condition: ready for operation (used), This JAESPA W 440 HA Metal Band Saw was manufactured in 2015. It features a saw band length of 4,900 mm and operates on 400 V / 25 A. Certified with CE standards, consider the opportunity to buy this JAESPA W 440 HA Metal Band Saw. Contact us for more information. • Saw Band Length: 4900 mm • Electrical Data: 400 V / 25 A • Certification: CE Iiodpfxex U Tfcj An Dja • Electrical Diagram No.: 15.013

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Iiedpfx Aex D Riben Dja • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: ready for operation (used), Year of construction: 2002, number of axes: 4, This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. • Working area: 3000 x 1050 mm Iedpfx Anjx D Dvnj Djia

Condition: used, mileage: 2,27,566 km, power: 130 kW (176.75 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 6,390 kg, maximum load weight: 6,110 kg, overall weight: 12,500 kg, axle configuration: 4x4, wheelbase: 3,050 mm, fuel: diesel, driver cabin: other, gearing type: other, emission class: euro5, suspension: other, number of seats: 2, total length: 5,100 mm, loading space length: 2,650 mm, loading space width: 2,000 mm, loading space height: 4,000 mm, Year of construction: 2012, operating hours: 16,641 h, construction height: 3,360 mm, Equipment: air conditioning, all wheel drive, hydraulics, onboard computer, trailer coupling, The Unimog U400 405/12 impresses with its versatility and robustness and is ideal for use in agriculture and construction. Powered by a powerful 4,249 cc diesel engine with 177 hp and the Euro 5 emissions class, it meets modern environmental standards. With a total mileage of 227,566 km and 16,641 operating hours, it is in good shape. The Unimog has a trailer hitch, air conditioning, a front PTO and municipal hydraulics, which support flexible attachment options. The vehicle was built in 2012 and has only been used by one owner before. With its compact dimensions - 3,360 mm in height, 2,360 mm in width and 5,100 mm in length - it still offers an impressive payload with a permissible total weight of 12,500 kg. The Unimog has a green environmental sticker, which allows it to be used in urban emission zones. Operating hours: 16,641 hours Only sold to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. Ijdpfor Uzthex An Djia

Condition: excellent (used), • Original ZÜRN milling toolholder, Germany • Type: SK40 – TC40x06x100-AD (DIN 69871) • High manufacturing precision, balanced for CNC operation • Tool shank Ø6 mm, length 100 mm • Robust design – Made in Germany • Very good condition, ready for use Iijdpfx Ansxcx Suj Dsa

Condition: excellent (used), HOLEX SK40 collet chuck for ER collets – robust design, ideal for use on CNC machining centers. • Type SK40 – DIN 69871 • ER collet (diameter Ø16 mm) • Chuck lengths: 70 mm, 100 mm, 110 mm (depending on model) • Max. speed 12,000–15,000 rpm • Torque up to 70 Nm • Balancing class G6.3 – stable operation at high speeds • Brand HOLEX – Hahn+Kolb Germany • Very good, warehouse condition • Available individually or as a larger set Iedsw S Itbspfx An Djia

Condition: excellent (used), For sale: a set of 3 professional AMP / TYCO Electronics handheld crimping tools for industrial, automotive, and workshop applications. Original tools with EDB Electronic service documentation – each dedicated to a specific range of wires and contacts. Iijdpfsw Svapex An Dsa

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Ijdpfx Anoym Nb No Djia Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: good (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, Equipment: CE marking, documentation/manual, HOMAG Optimat BAZ 722/42/16/K Gantry CNC machine with 2 shuttle tables Options included: Vacuum pumps 2pcs Parts positioning laser. Ijdpfx Anoyq Nkre Deia Vacuum pads Scrap parts transporter

Condition: good (used), We have several machines in stock: - Assembleon TOPAZ Xii Iijdeyw H Ucopfx An Dja - Assembleon Emerald Xii - Assembleon OPAL Xii All in good condition. Complete line: MPM / DEK / Assembleon / Heller / Vitronics

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Iijdpfxjyhnuko An Dsa Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm Iisded Nbk Tspfx An Dsa cutting height 260 mm saw band length min. 3200 - max. 3400 mm saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 - saw blade shear - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: used, maximum load weight: 13,950 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,110 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2016, Equipment: ABS, The vehicle was repainted in 2022 and the floor panels were renewed. Very good condition. Advertising stickers are applied and can be removed. Equipment: air suspension, Dura Bright ET 120 aluminum rims, 385/65 R22.5 tires, pallet box. Safety: ABS, EBS, disc brakes. Ijdpfsxtr E Nex An Djia

Condition: good (used), 700 USED WP Unitherm trolley oven. The oven with a gas/oil burner. EXTERNAL DIMENSIONS (in cm.): - W:135, - L: 210, - H: 290. The USED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Iiedjq R Ug Depfx An Dja The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.