Used Jwe 30-2100 for sale (24,688)

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Dedpfx Aowr Nnbea Njut

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. Dusdsx Tg Axopfx Aa Not These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ Turning and Milling Center including GL20II Gantry Loader! TECHNICAL DETAILS Swing diameter over bed: 760 mm Swing diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Center distance: 689 mm Distance chuck to chuck: 625 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70/-50 mm B-axis travel: 640 mm Dujdsy Hk Niepfx Aa Nst Rapid traverse (X/Y/Z/B): 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm, ASA 8" A2 Maximum sub-spindle speed: 4,500 rpm, ASA 6" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar capacity: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Control: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm,

Condition: new, sheet width 2100 mm plate thickness 40 mm pre-bending 30 mm upper roll diameter 390 mm lower roll diameter 360 mm side roll diameter 300 mm Duodpfx Asyv Nt Eoa Nst total power requirement 22 kW machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm Dedpfx Asyv Nh Noa Nout side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 10 mm pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm Dusdpfjyv Nhcox Aa Net

Condition: new, sheet width 3100 mm plate thickness 6 mm pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm Dsdoyv Nf Ijpfx Aa Njut bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel Duedpjyv I Smefx Aa Nst - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm Dsdpfx Asyvvn Noa Nsut throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 100 - 1.800 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Dsdpfx Aaofh Tmmo Nsut Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm Djdpjha E S Tjfx Aa Nsut The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device Djdpfx Ajynnczja Neut LED lighting with pivot arm

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X1 - R1 - Z1 - X2 - R2 - Z2 BENDING LENGTH: 6100 mm TONNAGE: 300 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 5100 mm CONTROL UNIT: CYBELEC WEIGHT: 35000 Kg Djdpfx Aaexu R Dmj Neut OVERALL DIMENSIONS: 6975 x 2090 x 4050 mm NOTE: WITH CNC TILTING SHEET SUPPORT

Condition: excellent (used), Year of construction: 2011, Robotic welding station KUKA KR 30-3 + positioner + Fronius system Dusdpsy Ia S Nofx Aa Not Robot: KUKA KR 30-3 Control: KRC2 Year of robot manufacture: 2011 Year of station construction: 2011 2 robots CMT welding power sources: 2 pcs Power source manufacturer: Fronius Type: Trans Synergic 4000 Wire feeder: VR7000CMT FB: RCU 5000i 2 torch cleaning stations Rotary table 2 riveting stations Riveting station manufacturer: Böllhoff Microprocessor control: Proface TIG welder Manufacturer: Rehm Type: Tiger 170 DC Rotary assembly table Storage racks Storage platforms

Condition: good (used), For sale is a used MiniMax 5-function combination machine with a cutting length of 1500 mm. The machine is in good condition and has been serviced and inspected by our qualified technicians. Technical specifications: - Cutting length: 1500 mm - Cutting width: 700 mm - Cutting height: 103 mm - 2 spindle speeds - 3-knife planer cutterblock - Planing width: 300 mm - Jointing length: 1400 mm - 3 motors, each 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-E297B Duodpfjy Nxk Hsx Aa Njt

Condition: new, neu ca. 6-8 Wochen ab Auftrag Dujdpfx Aaowva Hpj Net Spanien 8970 € 173.12 € 30 mm MK 3 250 mm 65 - 3.060 (8) U/min 380 mm 600 mm 2060 mm 260 kg 100 mm 170 - 660 mm 1.216 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 7160 € 138.19 € 30 mm MK 3 250 mm 245 - 4000 U/min M25 400 mm 655 mm 1185 mm 280 kg 120 mm 100 mm 85 - 635 mm 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE Duodpfx Aajwiq N Ue Nst V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB)

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Dusdpfxsy Nif Is Aa Njt Flow rate: 5,000 L/h Weight: 180 kg

Condition: used, operating hours: 1,330 h, Equipment: all wheel drive, Sale on behalf of customer---- Vehicle/Machine Type: Construction machine (Other construction equipment) Structure: Tracked mobile stockpile conveyor Manufacturer: Pronar Model: MPT 30/1 G Power: 55.4 kW Displacement: 2,800 cc Drive Type: Diesel OBD Drivetrain: All-wheel drive Transmission: Automatic Operating hours (read): 1,330 hours Exterior color: green Dimensions and Weights External dimensions (L x W x H): 12,620 mm / 2,950 mm / 3,248 mm Permitted total weight: 15,500 kg Standard and Special Equipment Standard equipment: - Conveyor belt length (total structural length): 30 meters - Maximum discharge height: 13.8 meters Dujdpfx Aoy Nvb Asa Njt - Maximum incline angle: 25 % - Belt width: 1,000 mm - Maximum belt speed: 2 m/s - ...and much more. ----The machine is offered as-is, not refurbished! Nationwide delivery available at extra cost. Errors and prior sale excepted. Trade-in of your vehicle is possible. Financing/leasing available with no down payment! Do you have any questions? We are happy to advise you!

Condition: used, machine/vehicle number: 007905, Max. panel width: 1200 mm Dsdpfx Aajy Nkrpo Nsut Max. panel length: 2500 mm Length of conveyor: 13800 mm

Condition: used, Year of construction: 2024, load capacity: 3,000 kg, lifting height: 4,760 mm, total length: 4,300 mm, · Vorderspur 1520 mm · Abstand zwischen den Hinterrädern 1630 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2458 mm / 2458 mm · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B: FEM 3A · Bodenfreiheit unter Hubgerüst: 399 mm · Bodenfreiheit Mitte Radstand: 395 mm · Gangbreite für Palette 1000 x 1200 quer: 6180 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s Dusdpsy Rav Tefx Aa Njt · Zugkraft 6290 daN · Festellbremse: Hydraulik · Motorleistung gemäß ISO 1585: 37 kW · Nenndrehzahl: 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 4 - 2925 cm³ · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 3,465 h, load capacity: 3,000 kg, lifting height: 4,890 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,275 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Transmission: Automatic Dsdpoyvl Huofx Aa Njut Condition: Refurbished, no warranty Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 60 - 80% Battery voltage: 80V Battery capacity: 620Ah Battery year: 2023 Description: Price includes a brand-new UVV safety inspection, paintwork in very good condition (Ex-rental Still), battery from 2023, regenerated with a power cycler and Kappa Test 87% (see last picture), charger with matching connector included. We are happy to arrange affordable transport for you. Lease-purchase possible! Side shifter, 3rd valve, 4th valve, rear working light, front working light, heater, fully enclosed cab, full free lift, CE certificate, safety light,

Condition: new, pressure 30 t stroke 170 mm distance spindle /table max. 700 mm Front light range 600 mm Lateral light range 195 mm weight of the machine ca. 200 kg dimensions 670 x 970 x 1900 mm Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark Djdpjy Nnywefx Aa Njut

Condition: new, bore capacity in steel St 60 30 mm Duodpfx Aoyvvmxja Nst bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg