Used Köhler Tisch 800 for sale (8,681)

Condition: excellent (used), Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen -Slotted sieve: Separator sieve -Inner diameter: 129 mm Bsdpfx Aewx E Tasf Aodh -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional (Photos = sample model) Bsdpfsy N S Dyjx Af Ajdh All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Year of construction: 2011, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MY15339, Diesel generator set, consisting of an MTU diesel engine and a Marelli three-phase generator. Engine data: Manufacturer: MTU Friedrichshafen GmbH Model: 12V 2000 G65 Year of manufacture: 2011 Bdjdpfx Afozzxa As Ajh Power output: 695 kW Speed: 1,500 rpm Design: 12-cylinder V-diesel engine Displacement: approx. 23.9 liters Weight: 2,450 kg Generator data: Manufacturer: Marelli Motori Type: MJB 400 LB4 B34 Serial number: MY15339 Rated apparent power: 1,150 kVA Voltage: 525 V Rated current: 1,265 A Frequency: 50 Hz Power factor: cos φ 0.8 Operating mode: S1 – continuous operation Protection class: IP23 Insulation class: H Weight: 2,750 kg 40 ft hc container

Condition: good (used), Welding rotary table Protec KT 2000 A Bdsdspdqfrepfx Af Ash Load capacity 2000 Kg Infinitely variable inclination angle 0 to 120 ° with hand and foot remote control Height horizontal 1200mm Height tilted to middle 1000mm Special design welding current transmission 800 Ampere length 1700mm, width 1200mm

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503617 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of Manufacture: 2019 Operating Hours: 8250 h Technical Data, Clamping Unit Clamping Force: 2000 kN Platen Size H x V: 1772 x 800 mm Minimum Mold Height: 400 mm Maximum Platen Distance: 900 mm Opening Stroke: 500 mm Rotary Table Diameter: 2000 mm Ejector Stroke: 175 mm Ejector Force: 45 kN Mold Weight: 6000 kg Technical Data, Injection Unit Screw Diameter: 50 mm Injection Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 880 N Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 4.11m x 2.65m x 4.81m Total Weight: 22000KG Equipment Screen text in German Screen text in English Bdjdpez A Tdpefx Af Aeh CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: used, Year of construction: 2008, Roll production line König Classic Rex Combiline 800 This system is currently being refurbished (the photos are from the bakery). Bdodpfx Afsz A Slfo Ash Suitable for the production of round, oval, and stamped rolls, as well as other dimpled rolls. Year of construction: 2008 Dough divider and rounder, type: Classic Rex T6 Proving cabinet, type: Combiline 800 Weight range: 45–100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proving cabinet Proving cabinet with climate control (temperature, humidity) Side discharge conveyor for subsequent production (e.g., downstream wrapping machine) Stamping station including 2 stamping dies (Kaiser and salted rolls) Deposition machine for baking trays up to a maximum length of 100 cm.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of eroding time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld, multifunctional control unit Manual eroding with Powertec handheld EAGLE Powertec - fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump: max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Bjdozkftbjpfx Af Ajdh Erowa, type UPC production chuck CO2 fire extinguishing system

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available -Price: per piece Bdsdpfxezav Hrj Af Ash -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Bdodow Ig A Hspfx Af Ajh Wiring diagram no.: 107258 Errors, typos and prior sale excepted.

Condition: excellent (used), Year of construction: 2005, operating hours: 36,012 h, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, injection weight: 291 g, mold height (min.): 250 mm, Arburg 470C-1500-800 injection molding machine with conveyor belt and picker (257) Year of production: 2005 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 45 Injection weight [g]: Bdodpfszfhx Aox Af Ajh 291 Injection pressure [bar]: 2470 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 44.9 Working hours [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot socket: euro12 Feed hopper: NO

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor Bdjdobqqzgepfx Af Aoh -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 2,550 mm Number of bays per racking row: 01 unit, each 2,400 mm Number of levels plus base level: 02 units Included in the scope of delivery: 02x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can assemble the racking uprights for you for an additional charge of €17.50 plus 19% VAT. 04x Pallet racking beams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear span: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 02x Chipboard II grade, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Surface: possibly coated (possibly in two parts) 16x Z-brackets for locking / inserting chipboard, surface galvanized Suitable for chipboard flooring of 22 - 38mm, can be rotated and inserted on both sides For width 40 mm 08x Locking pins, new Design: fully galvanized For securing the longitudinal beams against unintentional lifting out 08x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 04x Shims, new Bjdpfxjkr Ux So Af Asdh Design: fully galvanized To level the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer and batch number Dimension: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of racking bays: 01 unit Length per racking bay: approx. 2,550 mm Number of bays per racking bay: 01 unit, each 2,400 mm Number of levels including the base level: 02 units Included in the scope of delivery: 02x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted framework) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 04x Pallet racking beams, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear span: 2,400 mm Max. load per pair of beams 1,600 kg, with evenly distributed load 08x Locking pins, new Design: fully galvanized For securing the longitudinal beams against unintentional lifting out 08x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete Through-mounting: M 12-13/95 Bodoktbnmepfx Af Asdh 04x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of racking rows: 1 unit Length per racking row: approx. 5,025 mm Number of bays per racking row: 02 units, each 2,400 mm Number of levels including base level: 04 units Included in the scope of delivery: 03x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Includes cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted framework) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 16x Pallet racking beams, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Design: Step beam Agraffe: 5 hooks Clear width: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 08x Chipboard II grade, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated (possibly in two parts) 32x Locking pins, new Design: fully galvanized For securing the longitudinal beams against unintentional lifting 12x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 06x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Bsdpokti Sxjfx Af Aodh General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm Bsdjzwxh Sspfx Af Aodh T-slots dimensions: 38 x 22 mm Weight: approx 600 kg

Condition: used, Technical specifications: Bedpfx Afjzvmr Ne Ajdh Max. cutting height: 370 mm Max. cutting width: 780 mm Wheel diameter: 800 mm Max. belt width: 40 mm Min. belt width: 15 mm Working table dimensions: 1100x950 mm Working table tilt angle: 0-25° Dust extraction port diameter: 100 mm Safety switch Motor power: 4 kW Voltage: 400 V Overall dimensions: Length: 1400 mm Width: 950 mm Height: 2500 mm

Condition: good (used), Year of construction: 2010, total length: 2,035 mm, total width: 1,035 mm, total height: 1,015 mm, overall weight: 400 kg, For Sale: Conveyor table from Köning Brand: König Type: Conveyor table 800 mm Belt width: 800 mm Conveyor height: 850 mm max Year of manufacture: 2010 Bodpfxozvfh As Af Aedh It is possible to view this machine on site. If you have any questions, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. Bdsdpfsx D Nd Dsx Af Aoh • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Bdjdpfx Ajwgicbof Ash Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet rack frame: Shelving system: Stow Type: Pal Rack NS Scope of delivery includes: 01x pallet rack frame, used Material color: RAL 5015 blue Frame profile: PLFB 13 Profile dim.: P 85 x 65 x 2.0 mm Incl. horizontal and diagonal braces, Base plates The frames are pre-assembled (bolted truss) Height: 3,300 mm Depth: 800 mm Bdedpfx Ajwqpmusf Aoh Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transport or shipping of this item is associated with additional costs, which can be requested from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: SSI Schäfer Type: PR 600 Included in delivery: 1x pallet rack upright, used Material color: Sendzimir galvanized Upright type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 2,200 mm Depth: 800 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery. Bedpfxswmkwte Af Aedh

Condition: good (used), shelf length: 2,650 mm, shelf height: 2,278 mm, Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data regarding installation: Number of shelving rows: 01 pc. Shelving length: approx. 2,650 mm Number of bays per row: 02 pcs. à 1,280 mm Number of levels incl. ground level: 06 pcs. Scope of delivery includes: 03x Upright frames, new Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including bracing bars and base plates Bdodpfx Afew H Rhxo Aeh The uprights are pre-assembled Height: 2,278 mm Depth: 800 mm 12x Shelf panels, used Material finish: Sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight | per piece: approx. 11.68 kg 01x Cross bracing, used Designation: KV31313 Material finish: Sendzimir galvanized 01x Load capacity sign with details of bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only available for collection. Any desired transport or shipping of this item is subject to additional costs, which can be provided separately depending on delivery location and scope.

Condition: good (used), shelf length: 1,340 mm, shelf height: 2,278 mm, Technical data for the shelving rack system: Rack system: SSI Schäfer Type: R 3000 Technical data for the installation: Number of rack rows: 1 pc Rack length: approx. 1,340 mm Number of bays per rack row: 1 pc at 1,280 mm each Bdjdpfjw H Rl Rex Af Ash Number of levels plus base level: 6 pcs Scope of delivery includes: 02x Upright frames, new Material finish: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including cross braces and base plates Uprights are pre-assembled 2,278 mm high 800 mm deep 06x Shelves, used Material finish: sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight per piece: approx. 11.68 kg 01x Diagonal brace, used Description: KV31313 Material finish: sendzimir galvanized 01x Load signage With information on bay and shelf load capacities, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. If transport or shipping is required, additional costs will apply, which can be provided upon request depending on delivery location and scope.

Year of construction: 1980, condition: used, For sale: a KENSA MASKIN SA 800 automatic coil unwinding unit, designed for narrow strip, steel coil, and wire. The unit is used and features a robust industrial design. It is powered by an electric motor and designed for the automatic feeding of material into a production line. It is ideally suited for profiling, stamping, rolling, wire processing, and other automated production lines. Technical specifications: Bodpfx Afjzg Tdme Aodh Manufacturer: Kensa Maskin Model: SA 800 Year of manufacture: 1980 Drive: Electric Maximum coil weight: 500 kg Maximum coil outer diameter: 800 mm Minimum coil inner diameter: approximately 400 mm Maximum coil width: 500–800 mm (depending on the configuration) Automatic material feed Robust industrial design If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² Bodpfxezrpufj Af Asdh speed - 35 m/min power requirement 2,1 kW weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet