Used Kunzmann Ba 1200 for sale (9,004)

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Nedocudizepfx Aqvewg Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, Mr. Seidel will be happy to assist you with any enquiries regarding the vehicle (by phone). Nwjdpfx Aqsyfrpmjvsg Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift Tail lift: Bär BC 1500S4 (1,500 kg), Refrigeration: Thermo King T-1200R-50, KIESLING refrigerated box, monotemp, tail lift ref. AN 232393, Length: 7,400 mm, Width: 2,480 mm, Height: 2,400 mm, axle configuration: 2 axles, rear axle drive, cab: standard cab NS, Engine: 280 TY, Transmission: ZF automatic 8AP, Gross vehicle weight rating: 15-16 t, Drive axle: single reduction, single axle, rear axle air suspension, brakes: disc/disc, wheelbase 5,175 mm, Driver Drowsiness Attention Warning system, standard frame overhang, AdBlue tank heating, standard braking system, Electronic Stability Program (ESP), intake air heater for optimal cold start performance in extreme temperatures, reversing camera system, Blind Spot Information System (BSIS) on right, Intelligent Speed Assistance (ISA), Moving Off Information System (MOIS), pneumatic parking brake, 200-litre plastic, lockable fuel tank, plastic steering wheel, heated fuel pre-filter on frame, standard chassis component arrangement, wiring for alcohol interlock (ALC), 30-litre AdBlue tank, Tyre Pressure Monitoring System (TPMS), sensors internal, rear axle ratio 4.13, Lane Departure Warning System (LDWS), Connectivity Box 4G including TCO service contract, voltage converter 24/12 Volt (10.5 Amp), hill start assist (Hill Holder) for comfortable uphill starts, Advanced Emergency Braking System (AEBS), speed limiter 90 km/h, Adaptive Cruise Control (ACC), clothes rail on rear cab wall with adjustable hooks, manual cab tilt device, warning triangle according to ECE-27, front halogen headlights, standard flat-roof cab, radio with Bluetooth, DAB+ and 7" display, mirrors for 2,600 mm body width, mechanical roof hatch, plastic bumper, black cab attachments, fabric-trimmed cab interior, digital tachograph 4.1, white flat roof, rear air suspension, front parabolic spring, 2 wheel chocks, left-hand drive for right-hand traffic, specification for temperate climate, front manoeuvring and towing eye, front underrun protection for chassis with GVW >7,490 kg, grey chassis frame, C-profile steel ladder frame, chassis protection sealing Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, centrally mounted exhaust tailpipe, air filter unit under cab, EURO VI E emission standard, NOISE ECE 51/03, two-stage engine brake, can be activated via right-hand column stalk, Westinghouse brake, raw air intake without snorkel, heated air dryer for brake system, extension module for PTO control, axle load indicator in cluster, tyres 305/70R19.5, LED tail lights, without battery isolator switch, electrical preinstallation for tail lift operation according to VEHH standard, reverse warning buzzer (deactivatable), 170 Ah batteries (recommended for tail lift and/or PTO use), toll system preparation (OBU), includes antenna and wiring on dashboard without receiver, alternator: 2,880 Watt (24 Volt x 120 Amp), electrical preinstallation for cargo area lighting,...

Condition: used, z-travel:380 mm y-travel:400 mm x-travel:500 mm tool taper:SK 40 vertical head swivelling:beidseitig 90 Grad table-size:LxB 700x425 mm dimensions of the machine ca.:2x2x2 m quill stroke:60 mm groove width:14H7 mm flute distance:63 mm weight of the machine ca.:2 t total power requirement:10 kW Speed range of live tooling:5 - 3000 min -1 Loading:max. 250 kg clamping slots:6 power capacity - milling spindle:5,5 kW Nedpfjcxxmqjx Aqvjwg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19636, Offer 24103 Technical data: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance spindle - table 400 mm - Working spindle speeds Horizontal 30 - 1275 rpm - Work spindle speeds Vertical 66 - 2840 rpm - Feed rates X - Y and Z - axis Nwodjtwmclopfx Aqveg - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 60 mm, table width: 650 mm, table length: 350 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Dear Sir or Madam, For sale is a CNC milling machine of the type Kunzmann WF4/3 from year of manufacture 2004. The machine can be operated manually and under control. The Heidenhain TNC124 control is excellent for learning the basics of CNC programming and is still very popular in production as well as for machining special parts. The very quickly folding vertical milling head makes the Kunzmann a real all-rounder with nevertheless low space requirements. You will receive this machine from us workshop tested, partially overhauled or completely overhauled, available with or without cabin. Availability: on request Year: 2004 Control: Heidenhain TNC124 Table: fixed angle table 650x350mm Travel: X400mm/Y350mm/Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1-4000 rpm Feed: 0-2000 mm/min Tool holder: SK40 Equipment and accessories: coolant system, central lubrication, manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request we can completely or partially overhaul the selected machine for you - On request you can order additional accessories such as tools, etc., directly - On request we can also install other accessories such as safety devices - We are also happy to take care of shipping and/or installation Nedpfx Aju H U Hkeqvjwg

Condition: excellent (used), Year of construction: 2002, Used CNC tool milling machine Nedpfexz Rkyjx Aqvewg Year of manufacture: 2002 Control manufacturer: Heidenhain Control type: TNC 426 Working area: X: 400 mm Y: 350 mm Z: 400 mm Clamping surface: 650 x 350 mm (fixed table) Milling spindle tool holder: SK40 Spindle speed range: 5 – 5000 rpm Feed rate: 0–2 m/min Tool changer: none Accessories: Standard, chip tray, handwheel & documentation including declaration of conformity and data backup

Condition: like new (used), Year of construction: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Spindle speed range 6,500 rpm Spindle taper SK 40 Tool changer 24 positions Njdpfjtdfbmex Aqvswg Control system Siemens 840 D Total power 20 kW Machine weight 5,500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition: very good

Condition: new, Year of construction: 2024, overall grade 1-5 (1 bad, 5 like new): 5/5 certificates: CE, TÜV Manual/Mechanical quick coupler Additional hydraulics Quick change Rubber tracks Standard bucket Hammer function Mini digger Rhinoceros xn12-8 Year 2023 Equipped with strong 3 cyl Kubota diesel 2x excavator bucket + adjustable undercarriage Extra option: Mechanical switch Thumb Ripper 1 year warranty on parts, excluding wear and tear Lease also possible, ask for the conditions Total weight gvw: 1.200 kg Motor: Kubota 3 cylinder Engine manufacturer: Kubota Nsdpfexb Epwex Aqvewg Production country: China General grade (1 min - 5 max): 5/5 Gross weight: 1.200 kg Engine: Kubota 3 cylinder

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 71267, total width: 500 mm, total length: 500 mm, total height: 500 mm, overall weight: 20 kg, TECHNICAL DETAILS Measuring volume: 1,200 mm Accuracy: 0.015 mm MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): approx. 500 x 500 x 500 mm Weight approx.: 20 kg EQUIPMENT Laptop and software (completeness not guaranteed) Transport case Nwsdpsy Tm Uzsfx Aqvog Note: The red base on which the laptop sits is not included in the offer.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 127-01204, functionality: fully functional, power: 7.8 kW (10.61 HP), spindle diameter: 40 mm, pivoting range: 45 °, table width: 450 mm, table length: 2,680 mm, TECHNICAL DETAILS Table length: 2,680 mm Table width: 450 mm Tilting spindle: Automatic Maximum spindle tilt: 45° Spindle diameter: 40 mm Minimum spindle speed: 3,000 rpm Spindle speed control: Stepped MACHINE DETAILS Main motor power: 7.8 kW Connection voltage: 400 V Connection current: 16 A Nwsdpjy Tniysfx Aqvsg Dimensions & Weight Transport dimensions (L x W x H): 2,680 x 1,200 x 2,200 mm Transport weight: 950 kg Feeding device Manufacturer: Masterwood Model: Euromeo Number of wheels: 4 Number of speeds: 2 Guide manufacturer: Aigner

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Nedpfsy T Eb Tsx Aqvjwg Operating manual, driver’s handbook, spare parts catalogue

Condition: excellent (used), functionality: fully functional, Locatelli MK-CC 1200 Turning Center Turning length: 1200mm Automatic loading of stock material from a feeder Nwodpfx Aqsyxwpyeveg 3 Duplomatic floating tool holders, guided by a template 3 upper tool holders with axial movement Option for face drilling in the material Machine control system modernized in 2023 Excellent condition

Condition: excellent (used), functionality: fully functional, Comec FGS 1200 2T Carousel Milling Machine Number of units: 2 Unit configuration: 1. Milling unit, 11 kW 2. Milling unit, 11 kW Njdpfx Asy S Ttujqvowg Pneumatic material clamping system

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Nodpfjvc Aytox Aqvewg Machine on sale as is, without test run. i.D. *

Condition: new, empty load weight: 3,280 kg, maximum load weight: 9,720 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, with side wall extension 900 mm high, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Nwjdpfx Aey U Hyaeqvjg

Condition: good (used), Paper stacker Baumann Wohlenberg BA 2Ne The machine is 100% functional, in perfect condition. This is the latest design from the German manufacturer. Technical data: Maximum format: 550 x 770 mm Stack height: 900mm Nwsdpfxoy Sd S Ie Aqvog Weight: 900kg Power supply: 400V air table Chrome table surface

Condition: good (used), functionality: fully functional, Shelf press for veneering Orma 220×1200 Shelf length: 2200 mm Nedpey Smyhjfx Aqvjwg Shelf width: 1200 mm Press equipped with 4 cylinders Shelves heated with water from central heating

Condition: new, Year of construction: 2025, pressing force: 1,200 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, flow forming, shaping, and heavy-duty pressing operations. Thanks to its eight-slide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved via vibration, ensuring that loads generated during pressing are distributed evenly to maintain parallelism and squareness tolerances. ⚙️ Standard Equipment Nwodpfx Ajx N T Rueqvog - Steel construction, 8-slide H-frame press design - Vibration-relieved stress body structure - Bronze Zr14 slide bearings - WPQR and WPS welding applications certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-slide H-frame press design Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1200 tons Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibro-stress-relieved Welding Application: WPQR and WPS applications certified by TÜRK-AK in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cc – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6100 mm Approx. Press Width: 3550 mm Approx. Press Depth: 2400 mm Lower Table Height From Ground: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,200 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, retraction force: 400 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Stamping) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic stamping and deep drawing presses are designed to deliver maximum rigidity, precision, and process control in sheet metal forming applications requiring high tonnage. The 8-guideway H-frame structure ensures stable maintenance of parallelism and perpendicularity tolerances even with large table dimensions. The CHSP 1200/400 model, featuring a 1200-ton main ram and a 400-ton blank holder capacity, is tailored for heavy industry applications requiring deep drawing, stamping, and controlled material flow. Its vibration-stress-relieved steel construction frame guarantees long-lasting and reliable performance. ⚙️ Standard Equipment • Steel construction, 8 guideway H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 gib guides • WPQR and WPS certified welding by TURKAK-accredited institutions (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7'' DELTA touchscreen panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Monitoring of hydraulic unit oil temperature and system status on screen • Offline filtration and industrial cooling system • SIEMENS – SCHNEIDER industrial switchgear • Industrial safety features for operator protection Nwodox N Uirspfx Aqvog 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8 guideway H-frame body type Frame Material: St52 – ERDEMIR Gib Guide Material: Bronze Zr14 Capacity (Ram): 1200 Tons Capacity (Blank Holder): 400 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Clearance (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 units) Blank Holder Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 1300V/315 V-R / Vertical injection molding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 454x740 mm Size of the clamping platens: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Nwsdpfx Aoy Slyyjqveg Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/width/height: 3.83x2.33x4.16 m Drive: Pump/motor: 18.5 kW Heating output: 8.98 kW Total output: 27.48 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track Nodpfx Aqouhr S Devjwg -Roller conveyor: with tilting function, without hydraulic unit -Speed: 14 m/min -Roller width: 1200 mm -Roller diameter: 110 mm -Axle spacing: 150 mm -Conveyor length: 2800 mm -Tilt function: hydraulic, approx. 20° -Wooden board: 2500 x 1700 mm -Overall dimensions: 3100/2300/H2000 mm -Weight: 1180 kg

Condition: good (used), Year of construction: 2013, Inclined belt conveyor / belt conveyor, powered, approx. 16.40 m length, belt width 59 cm, Transnorm – used – Price ex-works (net): €1,395! Nwjdpfx Aqowxu I Teveg Manufacturer: Transnorm Year of manufacture: 2013 Type: 1200 belt conveyor with central drive Element length: approx. 6.80 m / angled segment 9.80 m Element width: approx. 70 cm Belt width / nominal width: 59 cm Element height: approx. 8 cm Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 1999, Accordion roller conveyor / scissor roller conveyor, Gura, extended length 4.20m, mobile – used - : Price ex-location: €650 (net), disassembled, packed and loaded! Manufacturer: Gura Type: 1200 – 524 – 3SVX Year of manufacture: 1999 Length extended: approx. 4.20m Length retracted: approx. 1.30m Width: approx. 53cm Height (height-adjustable): currently approx. 80cm Roller length: approx. 11cm Mobile on castors The scissor conveyor is extendable, suitable for curves, and its length is variable. Condition: good Availability: immediately Nwodpey Aiyrefx Aqvjg Location: Storage site, Frankenberg, Saxony The scissor conveyor is extendable, can be steered through curves, and is variably adjustable in length.

Condition: good (used), Year of construction: 1996, approx. 4x belt conveyor, Transnorm, approx. 1m long - second-hand - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Nwsdju Ezyuepfx Aqvjg Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos1+2+21+22 Manufacturer: Transnorm Type: TS 1200 Belt conveyor / Type: 1600-105 Year of construction: 1996 Element length: 100cm Element width: approx. 50cm Belt width: approx. 40cm Motor: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2007, approx. 4x belt conveyors, Transnorm, approx. 0.80m long - second-hand - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos10+14+18+20 Manufacturer: Transnorm Type: TS 1200 Year of construction: 2007 Element length: 800mm Element width: approx. 50cm Belt width: approx. 40cm Belt type: KT 217 Belt length: 1675mm Nwjdpou Ezzrofx Aqvjg Motor: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony