Used Leco Material Testing for sale (25,200)

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Hjdpfxjzd Sdgo Abtjt Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Lindner Burst Test Stand We offer a Lindner burst test stand here. Hedpfxozd Sive Abtjt AGB Burst Test Stand TMM4 Technical Data: AGB Burst Test Stand TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Chamber temperature range: RT ... 180°C Medium temperature range: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Dimensions: Length 2150 mm x Width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Fuses: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required for commissioning the burst test stand: Pump, cooling tower & fire alarm control panel – these are not included. Type: AGB Burst Test Stand TMM4 Weight approx. 705 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Here, we offer a Weiss emission test chamber. Mini - SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation; scope of supply: connecting flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3-phase + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ + 18-45 Condition: used Sale from our location Hjdjzd Slkspfx Abtst Scope of supply: (Only the Weiss emission test chamber WT 5.1'/ + 18-45 Mini-SHED) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer you a Thermotron environmental test chamber. Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65º to 71ºC: 17 Heating time in minutes -65º to 180ºC: 43 Heating time in minutes -40º to 85ºC: 16 Electrical requirements in full load amps 230/3/60: 19 Electrical requirements in full load amps 230/1/60: 25 Electrical requirements in full load amps 220/1/50: 27 Cooling time in minutes 85º to -40ºC: 32 Cooling time in minutes 71º to -65ºC: 54 Cooling time in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used Hodpjzd Snrjfx Abtjt Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here, we offer you a Stratasys Objet 3D printer. The Objet Connex 500 is the groundbreaking multi-material 3D printer from Objet. With a large build volume of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material inkjet technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex 500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent, and standard to ABS engineering plastics. Excellent productivity The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue separate model elements together • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - allows printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of uninterrupted capacity • High speed - simultaneous printing of multiple items from different materials; models cure during printing; models can be processed immediately after printing • Easy-to-remove support material for complex geometries • Office comfort - quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. According to the last operator, it is in working condition. No functional test has been carried out by our company. Year of manufacture: 2010 Type: Objet Connex 500 Hodpfx Aszdnplsbtet Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Water-Cooled Lamp System Exhaust Connection Interface Connections Integrated Humidification System Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Hjdozf D Rnjpfx Abtst Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Thermal Compensation at +20°C: 3000 W Thermal Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Level at 1m Distance (Free Field Measurement): < 69dB (A) Side Access: 5.5 cm / 12.5 cm Hedpfx Abjzg Tpistot Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants compliant with legal regulations 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of Supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Deviation (Temporal): ± 0.1 to ± 0.5 K Temperature Deviation (Spatial): ± 0.5 to ± 2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Heat Compensation at +20°C: 3000 W Heat Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 Liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Pressure Level at 1m Distance (Free-Field Measurement): < 69dB (A) Side Opening: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: Approximately 570 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers will be subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of Supply: (See Image) Hjdpszg Tp Asfx Abtot (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Time-related temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Hjdpfx Abszg Tx Rstst Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Time-related temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-related humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! Hodpszg Ty Ujfx Abtjt The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), RMS Vibrations Vibration Testing System Here we offer you an RMS electrodynamic vibration testing system. RMS Vibrations Vibration Testing System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Hedszdtc Dopfx Abtet Untested! Tests were not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Installation dimensions: 16,000 x 4,000 x 3,400 mm. Hsdpfoy T Ulzox Abtst

Condition: good (used), H. Köhler HK 320 BF Kesternich Testing Device Manufacturer: H. Köhler KG Type: HK 320 BF Device Type: Kesternich Testing Device / Corrosion Testing Chamber Made in Germany Corrosion testing device for performing Kesternich tests under a sulfur dioxide-containing atmosphere to evaluate the corrosion behavior of materials and coatings. Technical Data Test chamber volume: approx. 300 liters Hsdpfxszclxvo Abtst Internal dimensions (W x D x H): approx. 725 x 500 x 750 mm External dimensions (W x D x H): approx. 1070 x 570 x 1970 mm including base frame Temperature range: Room temperature +5 °C to 60 °C Expandable to approx. 75 °C according to the manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar required Application Areas Corrosion testing Kesternich test according to the SO₂ method Coating testing Automotive industry Material testing Quality assurance Research and development Equipment Stainless steel test chamber with viewing windows Large front door with locking mechanism Test specimen holders / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area External control and regulation unit Condition Used device from industrial application. Optical condition as shown in the pictures. Signs of wear and tear due to age and use. Test chamber and equipment are largely complete. Inspection possible by arrangement. Scope of supply: see pictures. Loading can be arranged. Errors and changes excepted.

Condition: new, Year of construction: 2026, Troughed belt conveyor | Trough belt conveyor | Belt conveyor Demonstration machine Make: S&F GmbH Type: MFB-500/4 Belt width: 500 mm Centre distance (A-A): 3,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum motor Motor power: 1.1 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 160 mm Tensioning drum: Drum diameter 160 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 300 kg Machine colour: RAL 6025 Fern green Hodpfszamwbjx Abtet Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Hedpfx Aboy Exatstjt

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, X-Floc EM400/440 Insulation Blowing Machine Professional high-performance blowing machine designed for processing a wide range of loose insulation and fibre materials. Suitable for open blowing, dry injection, damp-spray applications and material conveying, it can be used both on construction sites and as part of a stationary production system. Hodpfx Abozlggxetet The machine is equipped with a large loading hopper of approximately 1,000 litres, capable of holding around 5–6 standard bags of insulation material. Four rotating shredder shafts progressively break up and condition the compacted fibres before transferring them into the rotary airlock. The adjustable airlock feed gate allows precise control of the material flow. Depending on the version and material used, the EM400/440 can reach a processing capacity of up to approximately 1,600 kg/h. The adjustable air system delivers a maximum pressure of 540 mbar, with an air volume of approximately 100–430 m³/h for the EM400 and up to 100–680 m³/h for the EM440. Main features: Suitable for different insulation and fibre materials Two-stage material conditioning system Four high-speed shredder shafts Approx. 1,000-litre loading hopper Adjustable material flow with 10 feed-gate positions Low-dust loading system with transparent strip curtains Connection for external dust extraction Remote adjustment of air and material parameters Robust, low-maintenance industrial construction Easy access to internal components for servicing Direct NW 76 mm hose connection Suitable for mobile or stationary applications The machine can be operated using a cable or optional wireless remote control, allowing the operator to adjust air output, material supply and pressure-control functions directly from the working area. Technical data: Processing capacity: up to approx. 1,600 kg/h Maximum pressure: 540 mbar Hopper volume: approx. 1,000 litres Shredder shafts: 4 Dimensions: approx. 1,285 × 1,000 × 1,800 mm Filling height: approx. 1,250 mm Hose outlet: NW 76 mm EM400 power: approx. 7.5 kW EM440 power: approx. 10.5 kW Weight: approx. 425 kg for EM400 / 445 kg for EM440 Maximum conveying height: approx. 20–45 m for EM400 / 20–60 m for EM440 Optional equipment may include a wireless remote control, pressure-relief valve, internal or external air amplifier, suction drum and dust-extraction system.

Condition: used, functionality: fully functional, machine/vehicle number: VF611A166HD019210, mileage: 8,02,000 km, first registration: 12/2016, fuel type: diesel, tire size: 315/70, tire condition: 80 %, axle configuration: 4x2, brakes: intarder, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: additional headlights, air conditioning, fog lights, onboard computer, parking air conditioner, retarder, spoiler, Year 12-2016 Km 802,000 Automatic Transmission Hjdpfx Ajy Sgqgebtjt ZF Intarder Tyres 315/70 at 90/70% Double Fuel Tank Spoiler, Fenders Refrigerated Box Parking Air Conditioning Alcoa Dura-Bright Alloy Wheels ADR All Classes

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Hedevz U Erspfx Abtet Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Here, we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control panel »Touchpanel« On the »Touchpanel« control panel, all control and operating commands can be triggered by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine part, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and test equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse, to be provided by the customer: 16 A, slow-blow Sound pressure level approx. measured at a distance of 1m from the front, 1m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Hjdpfx Abezga Hustot We will gladly answer any further questions you may have by telephone.

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Hodpfx Abomdn Trotet Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: used, mileage: 5,45,368 km, power: 390 kW (530.25 HP), first registration: 06/2022, fuel type: diesel, empty load weight: 7,516 kg, maximum load weight: 12,984 kg, overall weight: 20,500 kg, axle configuration: 4x2, wheelbase: 3,800 mm, next inspection (TÜV): 02/2027, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: air conditioning, cruise control, low noise, onboard computer, parking heater, Unladen weight: 7516 kg, permissible total weight: 20,500 kg. 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5. Fabric seats, grey interior, leaf/air suspension, retarder, tachograph, fifth wheel coupling, electronic braking system (EBS), electronic stability program (ESP), adaptive cruise control (ACC), comfort seats, air-suspended driver’s seat, seat heating, radio, leather steering wheel, lumbar support, alloy wheels, electric windows, outside temperature display, electrically adjustable exterior mirrors, wide-angle mirror, immobilizer, central locking, sun visor, refrigerator, daytime running lights, information and service system, speed limiter, wide tires: 385 front axle, storage box. Tyres: 385/65R22.5 9mm front axle, 315/80R22.5 6-10mm rear axle. Subject to errors and changes. Hodpfjyixuksx Abtst

Condition: ready for operation (used), Reicherter Wolpert Hardness Testing Machine / Hardness Tester Manufacturer: Reicherter Model: Briro VA II Test Loads: 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf Manufacturer: Wolpert Model: Dia Testor 2n Hedpox U Tlvsfx Abtjt Throat Depth: 150 mm Test Area Height: 300 mm Brinell (ISO 6506): 5 / 10 / 15.625 / 30 / 31.25 / 62.5 / 187.5 / 250 Vickers (ISO 6507): 5 / 10 / 20 / 30 / 40 / 50 / 125 Accessories: See photos for details You are welcome to come for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Requirement: a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are the property of their respective owners and are used only for identification and description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: excellent (used), Here, we offer a temperature shock test chamber with a 100-liter usable volume for larger test specimens up to 30 kg. Compliant with all common international standards. Hjdozfg Upopfx Abtot Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hjdpeukitxsfx Abtot Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Year of construction: 2025, condition: new, Material support stand No. 100006, height 650-1050 mm, powder-coated, RAL 7011 Hodpfx Aexqrghebtst