Used Leibinger Gradsteller-Quersteller-Forwards-Backwards for sale (3,349)

Condition: used, power: 219.91 kW (298.99 HP), fuel: diesel, Year of construction: 2014, From our used vehicle inventory, we offer you: Fire engine HLF 20 on Iveco FF150E30 4 x 4 Chassis • Iveco FF150E30 4 x 4 Euro 5 • Power: 220 kW / 299 hp at 5,880 cm³ displacement • Automatic torque converter transmission Fedpfx Agjzbb S Aj Asgc • All-wheel drive with twin tires on the rear axle • Year of manufacture: 2014 • Mileage: approx. 63,300 km • New TÜV/inspection Cab • Standard crew cab with 8 seats (1:7) • 2 PA (personal equipment) holders in the middle row facing backwards • 2 additional PA holders in the middle row facing forwards • Color: RAL 3000 (fire red) Dimensions & Weight • Unladen weight approx. 9,100 kg • Dimensions approx. 8,600 x 2,500 x 3,300 mm (LxWxH) Superstructure • Manufacturer: Magirus • Design: HLF superstructure according to DIN 14530 • 3 roller shutters per side • Fold-out steps in front of each side equipment compartment • 2 additional PA holders • Rear: pump compartment • Mounting device for two single-person hose reels Firefighting equipment • Water tank 2,000 liters • Foam tank 120 liters • Pump: FPN 10/2000, overhauled by manufacturer Magirus in 2025 • Shape-stable rapid deployment hose in G6 Lighting/Safety • Area lighting on the superstructure • Cab lighting • Auxiliary spotlights • Rear warning system with 4 lights • Martin horn • 2 integrated rear warning lights • Pneumatic light mast at the rear (operated via generator) • Hygiene board A complete inspection and maintenance will be carried out on the vehicle. This includes checking all the technology, such as the engine, transmission, differential, and pumps, and replacing all filters and lubricants. The vehicles will receive a current TÜV (technical inspection) and inspection report. We will gladly provide you with a specific offer and present the vehicle in detail. Note: All information is provided to the best of our knowledge and belief, without warranty for completeness and accuracy. Images may show optional equipment. This is not an offer, but rather an information. Subject to prior sale!

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (less than 18 mm) - Material must be pure, with ash content below 1% ATRO Caution concerning: sand, stones, and mineral content - Material is compacted by pressing tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Fgodpefbb Arefx Ag Aec Optional upgrades available: Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size-reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - All types of control system integration - Semi-automatic packaging solutions + 24h operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Achievable briquette density of up to ≥ 1 kg/l *Details after testing Functionality: The machine features a silo with agitator. Each of the four corners of the storage silo contains a vertical screw which compacts the material downward into the press chamber. The machine operates with two cylinders, each pressing in both directions (either as the cylinder moves forward or backward). This produces four briquette outlets, each generating six individual briquettes. *Ideal for automatic feeding of the heating boiler Format: Ø 30 mm Throughput capacity: up to 310 kg/h maximum Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables fuel feeding of industrial firing plants via screw conveyor Fully automatic 24h operation possible High energy efficiency Briquettes/pellets with consistently high quality and density For automatic feeding into industrial combustion systems Small to medium quantities of wood chips generated in various processing industries (especially wood, biomass, etc.) can be efficiently compacted. The small Ø 30mm format represents an attractive alternative. Unlike our conventional briquettes, these can be fed automatically into industrial combustion systems. In addition to wood, a wide variety of other materials can also be processed without issue (various types of biomass and agricultural residues).

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2023, operating hours: 811 h, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, Used MW1000 Pile Driving Machine in Good Condition. The MW1000 pile driving machine is a high-performance and versatile unit designed for efficient and precise pile installation in various applications such as solar power plants, highway guardrails, vineyard installations, and construction projects. Working Hours: 811 hours Year of Manufacture: 2023 Fgedpfx Agsy Efbdj Aoc Optional Equipment: Screw Attachment, DTH and Auger Drilling Attachment, Pile Extractor, GPS/GNSS, Remote Control, and Automatic Leveling System Engine Brand: YANMAR Power: 35 kW / Stage 5 – 42 kW / Stage 3 Rated Speed: 2200 rpm Fuel Tank Capacity: 60 liters DPF Filter: Standard on Stage 5 engines Hammer Power: 1200 Joules Operating Pressure: 120 bar Impact Frequency: 570 – 1180 blows/min Hydraulic System Flow Rate: 50 – 100 L/min Pressure: 180 bar Hydraulic Oil Tank: 150 liters Travel / Mobility Low / High Speed: 2.2 / 4 km/h Climbing Ability (pile driving): 20% Side Slope (curb operation): 10° Track Type: Rubber tracks Dimensions Transport Width: A1 – 2280 mm Transport Height: A2 – 2550 mm Transport Length: A3 – 2950 mm Machine Width: A1 – 2280 mm Machine Height: A4 – 4400 mm Machine Length: A5 – 3110 mm Mast Height: A6 – 4500 mm Weight: 4350 kg Movement Capabilities Rotation: None Tilt: 10° Mast Forward Tilt: 12° Mast Backward Tilt: -63°

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A Fgodpoyyyr Tefx Ag Aec • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: ready for operation (used), Year of construction: 2003, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Travel force (moving plate): opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm • Min. mold height: 380 mm • Max. daylight: 1300 mm • Size of mold platens (H x V): 1060 x 1095 mm • Distance between tie bars (H x V): 710 x 710 mm Fgodeyyxmvjpfx Ag Asc • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mold weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel (X/Y/Z): 420 / 1200 / 2000 mm

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, table load: 300 kg, overall weight: 2,800 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis Optimum Optimill F 105 was manufactured in 2023. It features an X-axis travel of 550 mm, Y-axis travel of 305 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 800 x 320 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the Optimum Optimill F 105 vertical machining centre we have for sale. Contact us for further details. • Electrical connection: 3 x 400 V ~ 50 Hz, 15 kVA • Spindle: • Power S1: 7.5 kW • Power S6-30%: 11 kW • Torque S1: 48 Nm • Torque S6-30%: 70 Nm • Lubrication / coolant system: • Coolant pump power: 650 W • Tank capacity: 120 L • Compressed air: • Min. connection: 0.6 MPa (6 bar) • Air consumption: 0.1 – 0.15 m³/h at 0.6 MPa • Recommended air quality: ISO 8573.1 class 2 • Air consumers: tool changer forward/backward; tool clamp/unclamp; optional rotary table clamping • Compressed air service unit: • Drainage filters: 40 μm • Housing: Polycarbonate • Max. pressure: 1.5 MPa • Recommended oil: ISO VG32 • Lubricator quantity: 90 ml • Dewatering: manual • Air connection thread: 3/8” • Axis travels: • Z distance spindle–table: 100 – 600 mm • Accuracy: • Repeat accuracy: ±0.008 mm • Positioning accuracy: ±0.01 mm • Servo motor torques: Fgodpfx Aey Tl Ndjg Aoc • X: 8 Nm • Y: 8 Nm • Z: 11 Nm • Table: • Size: 800 x 320 mm • T-slots (size/number/pitch): 14 / 3 / 100 mm • Max. feedrate: 10,000 mm/min • Tool changer: • Positions: 12 • Max. tool diameter: 70 mm • Max. tool length: 300 mm • Tool change time: 7 s • Environmental conditions: • Operating temperature: 19 – 21 °C • Relative humidity: 5 – 80% non-condensing • Pressure: 700 – 1060 hPa • Storage temperature: 5 – 45 °C Technical Specification Taper Size ISO 40

Condition: new, functionality: fully functional, Year of construction: 2021, Technical data: Type: CPCD50-XC11H Load capacity: 5000 kg (500 mm center of gravity distance) Operation: diesel Engine: StageV Xinchai engine 60kW/2200rpm Lift mast: duplex tower (two-section) Lift height: 3000 mm (maximum fork height) Free lift: 150 mm (construction height does not change) Machine width: 1510 mm Machine height (tipping frame) 2350 mm Forks: 1 pair 1520 x 150 x 50 mm Aisle requirement (AST): 4960 mm Tilt cylinder: 6o forward – 12o backward Wheels: SE solid tires: front: 300-15-18PR rear: 7.00-12-12PR Steering: rear wheel, hydraulic power steering Brake system: self-adjusting hydraulic drum brake/mechanical lock Transmission: automatic, hydrodynamic Travel speed: with load 23km/h without load 24km/h Fgsdpey It Uqefx Ag Asc Hydraulics: 4/4 control valve Lighting: full LED lighting (two front and rear work lights, indicator, brake and reversing light Battery: maintenance-free starter battery Equipment: Horn, indicator, rearview mirror, electric reverser, sprung driver's seat with seat belt for increased comfort and safety Safety equipment: anti-roll bar, handrail, steering knob, automatic start-up prevention Other equipment: Hydraulic fork positioner, sideshifter

Condition: ready for operation (used), Year of construction: 2007, Lifting height: 4330mm, max. load capacity: 4t, load center distance c: 500mm, load distance x: 525mm, wheelbase y: 2021mm, axle load with load front/rear: 9296/1181kg, axle load without load front/rear: 3268/3209kg, tyres: super elastic (SE), front tyre size: 250-15, rear tyre size: 21x8-9 (SC15), front track width: 1030mm, rear track width: 920mm, mast tilt forward/backward: 3°/9°, mast height lowered: 2400mm, free lift h2: 160mm, mast height extended: 4187mm, overhead guard height h6: 2322mm, seat height h7: 1251mm, coupling height h10: 546/421mm, overall length l1: 3886mm, length including fork carriage l2: 2886mm, overall width b1: 1256mm, ground clearance at wheelbase center m2: 147mm, aisle width with pallet 1000x1200 crosswise Ast: 4208mm, aisle width with pallet 800x1200 lengthwise Ast: 4408mm, turning radius Wa: 2483mm, minimum pivot point distance b13: 629mm, travel speed with/without load: 19/20km/h, lifting speed with/without load: 0.30/0.46m/s, lowering speed with/without load: 0.55/0.46m/s, drawbar pull with/without load: 3770/4390kg, max. drawbar pull with/without load: 15,940/16,140kg, travel motor power K60 min: 15kW, lift motor power at 15% duty cycle: 25kW, battery: 80V 5PzS840, battery voltage: 80V, battery capacity: 840Ah, battery weight: 2178kg, drive control system: RX60-40, operating pressure for attachments: 250bar, oil flow for attachments: 30l/min, quick fork/FEM carriage for attachments: pin-mounted, dead weight: 6477kg, operating hours: 5700h, with documentation. The left wheel gearbox is defective, otherwise fully functional. UVV inspection and maintenance were last carried out in May 2025. The inverters were replaced 2 years ago. An on-site inspection is possible. Fgjdpfx Ajza E Rgeg Asc

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 130 h, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift truck – Diesel Load center: 600 mm Fork width: 200 mm Fork thickness: 100 mm Mast type: Duplex Transmission: ZF 3WG171 Condition: New machine Technical condition: New Front tires type: Pneumatic Fgodoy U R T Dopfx Ag Aoc Front tires size: 12.00 x 20 Rear tires type: Pneumatic Rear tires size: 12.00 x 20 Description: Side shifter, fork positioner, KALMAR SV/GV – fork carriage with central leveling, width B = 2,500 mm, Terminal-West quick-change system for SV/GV fork carriage. Additional hydraulic function including hoses. Kalmar EGO comfort cabin, air conditioning system ECC with fresh air filter, tinted windows and air-suspended, leather-reinforced Grammer Actimo XL driver’s seat. Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming. 12/24V power inverter including 2 x 12V and 2 x 24V sockets. Load weight display on screen. Direction change switch on lift hydraulic lever. Engine heater 220 V. Accumulator for lifting hydraulics. Hydraulic oil cooler with fan. Mast tilt 14° forward and 10° backwards. Adjustable height LED beacon. Kalmar knife-type fork tines, fork length l = 2,400 x 200 x 100 mm. Raised air intake for air filter incl. pre-separator. Mudguards on drive axle, mudguards on steering axle. Anti-slip coating on front wheel covers and tank. 2 extra LED headlights on mast beneath standard headlights. 2 extra LED headlights on front cabin corners facing direction of travel. 6 extra LED headlights on rear cabin corners with protection bars. Blue Spot front and rear. Automatic central lubrication system on steering axle and fork carriage. Sensor-controlled Forrex fire extinguishing system – automatic and manual activation. 6 Kg (powder) fire extinguisher EN3. Rear-view camera mounted on cabin roof with color monitor in cabin. Mast camera – connected to a monitor in the cabin (combined with rear-view camera). Tire pressure monitoring system.

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Fgjdpfx Agjwag Rij Asc Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller Fgsdswugczspfx Ag Asc 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory liquidation mask production line. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for dispatch. - Cross tables available - Ink return system integrated - Lateral lift integrated, can be deactivated if required The HERMETIC series can be used both as manual workstations and in automated applications. In manual operations, the machine impresses with its wide range of settings and high printing force; in automated applications, it stands out for its cam control system, which ensures a smooth and stable printing process. The absolute highlight is its drive mechanism: both the up-and-down movement of the printing pad and the forward and backward movement of the pad printing cliché are controlled by a cam disk. Fsdpfx Ajxqgk Usg Aogc

Condition: new, Year of construction: 2026, • Simple three-point linkage • Very robust, welded frame • Strong gearbox • PTO drive 540 rpm • Usable auger diameters from 10 cm to 80 cm, maximum length 1 m • Offset manually or hydraulically • Tilt adjustment of the auger tip (forward/backward) • Chassis length of 140 cm • Augers not included • Weight: 200 kg Fsdpfx Agor Ezn Rj Asgc

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Fgodpfx Agezagkzj Aec Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: used, Year of construction: 2022, operating hours: 1,249 h, mileage: 9,200 km, empty load weight: 16,000 kg, Operating hours: 1249, Initial registration: 03/13/2023_____Engine power: 256 hp / 188 kW (187.9 kW)Application: Maximum total weight 16 t - Sweeper unit preparationMain components:- Standard cab- Wheelbase 3350 mm- Euro 6 emission standard- Diesel engine, 6 cylinders, 7.7 l, 969 Nm- Exhaust and compression brake, 170 kW/231 hp- Transmission ZTO1006, 6-speed manual, overdrive- Drive axle ratio 5.13Equipment packages:- Manual sunroof- Side sun visor, driver's side- Manual air conditioning- Cruise control- Audio system DAB, radio DAB/FM/MW, antenna, Bluetooth telephone connection, USB, 2 speakersChassis:- Front axle load (technical) max. 5.8 t- Rear axle load (technical) max. 10.9 t- AdBlue tank 32 litersWheels and tires:- Front tires, 285/70 R 19.5- Goodyear, KMAX S- Rear tires, 285/70 R 19.5- Goodyear, KMAX DDrive train - Equipment:- High air intake, mounted on bracket on the right side behind the cabCab - Interior:- Right-hand drive- Comfort driver's seat, heated, seatbelt integrated in the seat- Basic passenger seat- One armrest, driver's side- Coat hook on the rear wall- Collision warning with emergency braking function (stationary and moving objects)- Lane keeping system/lane departure warning- Immobilizer, transponder in the key- Electric windows on both sides- Reversing alarm- Speed limiter 90 km/h- Metal sunroof- Steering wheel, adjustable in two directionsCab - Exterior:- Tinted windows- Window in the rear wall of the cab- Central locking with remote control- Rear-view mirrors, heated and electrically adjustable- Exterior sun visor- Headlights with beam angle adjustment- Daytime running lights LED, "V light"Standard features:Hydrostatic transmission HGB2Max. 1400 Nm and approx. 340 hpMechanical transmission integrated into the chassis with integrated hydrostatic system for stepless speed control during sweeping operationTransport speed 0 - 85 km/h via standard transmission (cruise control optional)This working unit allows stepless control of the sweeping speed forward (1 - 40 km/h) and backward (1-10 km/h) via an electronic accelerator pedal (Easy-Drive).At the same time, the suction power can be regulated independently of the driving speed between ECO and Max. Fuel tank in the sweeping superstructure, capacity approx. 190 lHydraulic fan drive. Hydraulic oil tank 50 l, engine compartment with noise-reducing material, fan exhaust duct leading upwards through the container extension, stepless electronic turbine adjustment, hydraulic pump, single.Sweeping material container:Sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel. Sweeping material container gross volume 6.5 m³, sweeping material container floor made of chromium-nickel stainless steel 1.4301. Sweeping material container tilting angle approx. 55 degrees, dirt slide made of chromium steel 1.4003, inspection flap on the right and leftDirty water drain via clamp hose and 2" drain valve, air guide screen, manually foldable, 2 flashing beacons orange, rear on the sweeping material container, suction pipe flap on the outside of the container, hydraulically operated, 4-stage locking support, pneumatically operated.Marker lights on the rear of the container, side marker lights.Sweeping unit: Fedjvacl Dspfx Ag Ajgc

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 115 mm, cutting width (max.): 4,200 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, SCHEER PA 7012PK – 4200 x 4200 mm Like-new, high-performance panel dividing system with postforming unit, head cutting saws, and vacuum loading system. LIKE NEW - FROM THE MANUFACTURER - 1 year warranty For sale is a powerful and extensively equipped SCHEER PA 7012PK panel dividing system with a cutting capacity of 4200 x 4200 mm. The system has been professionally overhauled and is ideally suited for industrial furniture and interior design companies with high demands for precision, performance and automation. Technical data Cutting length: 4,200 mm Cutting height: 115 mm Saw blade overhang: 135 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Automatic cutting height adjustment Residual cuts up to 5 mm possible Hardened guides Automatic forward and backward movement of the saw unit Main and scoring saws with integrated extraction Fully automatic angle pressing device Material feed HP 5107-4200 Servo-driven material pusher Feed speed up to 25 m/min Return speed up to 50 m/min 7 retractable clamping fingers Closed Pertinax surface in the stop area Air cushion system instead of rollers Control & Software with integrated industrial PC. Highlights: SSD hard drive Linux operating system Network-enabled (LAN/WLAN) Remote maintenance via TeamViewer / Remote Desktop Graphical cutting plan display Multilingual user interface 17" flat-screen monitor in swiveling control panel Virtually unlimited cutting plan management Optimization software OPTIMIN The integrated cutting plan optimization enables the direct creation and calculation of optimized cutting plans on the machine. Bills of materials are entered and automatically converted into economical cutting layouts. Postforming unit Integrated postforming unit Material height up to 80 mm Lift table TE 5085-4200 Four-spindle lift table Can be loaded from three sides Table size: 4,200 x 2,200 mm Stack height up to 650 mm Motor-driven roller conveyors on the right and left Fully automatic alignment systems Longitudinal alignment WP 5035-4200 Automatic positioning Working area 2,000 – 4,200 mm Transverse alignment WP 5034-4200 Three alignment fingers Working area 1,200 – 2,200 mm Front tables Angle stop table HP 5094-2406 3 workpiece support tables HP 5095-2406 Pertinax supports Air cushion system LK 5162 for all front tables Head cutting saws Main head cutting saw KS 5000-4200 Fully automatic positioning Adjustment range 300 – 2,100 mm Extended travel up to 3,100 mm Power 7.5 kW Integrated top and bottom extraction Additional head cutting saw Manually adjustable Positioning 0 – 50 mm from the stop edge Fsdpfx Asza Eazog Asgc Power 7.5 kW Vacuum loading system TE 5088-4200 Additional pusher with integrated short-stroke vacuum loading system. The panels are automatically transferred from the lift table to the pre-stacking table and fed into the processing process. This enables short cycle times and a high degree of automation. Conclusion An extremely rare and fully equipped industrial panel dividing system with extensive automation, postforming equipment, double head cutting system and vacuum loading. Ideal for the furniture industry, shop fitting, interior design, as well as larger carpentry and joinery businesses. Machine available immediately – 1 year warranty.

Condition: used, Year of construction: 2019, 1 used gas forklift truck UTILEV UT25P – barely used! Fgedpfxeybbw Ej Ag Aec Manufacturer's Description / Technical Specifications: Model: Utilev UT25P Fuel type: LPG (liquefied petroleum gas / propane) Load capacity: approx. 2,500 kg at 500 mm load center Typical application: Indoor & outdoor, warehouse, logistics, etc. Engine & Drive: Engine: PSI 2.4 L LPG or dual-fuel (4-cylinder, LPG-powered) Transmission: Powershift 1-speed (automatic, easy operation) Drive: Rear-wheel drive with mechanical inching control Mast & Lift: Mast: 3-stage FFL (Full Free Lift), standard Lift height: up to approx. 4,800 mm Fork carriage: Class II, approx. 1,118 mm Forks: approx. 40×122×1,070 mm Mast tilt: approx. 6° forward / 6° backward Tyres & Chassis: Front tyres: Pneumatic 7.00-12-12PR Rear tyres: Pneumatic 6.00-9-10PR Dimensions & Weight: Length: approx. 3,675 mm (with forks) Width: approx. 1,155 – 1,225 mm Height: approx. 2,140 – 2,170 mm (overhead guard) Ground clearance: approx. 105 – 130 mm Fuel tank (LPG): approx. 60 L Features & Equipment: Hydraulics: Standard 3-function levers Steering: Power steering with adjustable steering column Brake system: Drum brakes Seat type: Vinyl seat with belt Instruments: Standard instruments (fuel, temperature, operating hours) Weight: approx. 4,000 kg

Condition: ready for operation (used), functionality: fully functional, power: 219.91 kW (298.99 HP), first registration: 01/2008, fuel type: diesel, number of seats: 9, From our used vehicle inventory, we offer you: HLF 20 Firefighting Vehicle on Iveco FF140E30 4x4 Chassis • Iveco FF140E30 4x4 Euro 4 • Power: 220 kW / 299 hp with 5,880 cc displacement • Automatic transmission • All-wheel drive with off-road single tires • First registration: 03/2009 • Mileage: approx. 27,800 km • New TÜV (technical inspection) and SP (safety check) Cabin Fjdpfsyy A Iwjx Ag Aogc • Standard group cabin with 9 seats (1:8) • Seating: 9 (1/8) • 2 SCBA holders in middle row, facing backward • 2 additional SCBA holders in middle row, facing forward • Colour: RAL 3000 (fire red) Dimensions & Weight • Unladen weight: approx. 9,260 kg • Permissible gross weight: 14,500 kg • Dimensions: approx. 7,950 x 2,500 x 3,300 mm (LxWxH) Bodywork • Manufacturer: Magirus • Design: HLF body according to DIN 14530 • 3 roller shutters per side • Folding steps in front of each side equipment compartment • Rear: pump compartment • Mounting devices for two single-person hose reels Firefighting Equipment • Water tank: 2,000 litres • Foam tank: 120 litres • Pump: FPN 10/2000 • Rigid quick-attack system in G6 compartment • Mounting for 2 single-person hose reels at rear Lighting/Safety • Surround lighting on superstructure • Cabin lighting • Auxiliary headlights • Rear warning system with 4 lights • Front lightbar • 2 integrated rotating beacons at the rear • Pneumatic light mast at the rear (operated via generator) • Hygiene board A comprehensive inspection and maintenance will be carried out on the vehicle. All technical components such as engine, transmission, differential, and pumps as well as all filters and lubricants will be checked and renewed. The vehicles come with a current TÜV and SP certification. We are happy to provide you with a detailed quotation and present the vehicle to you in detail. Note: All information is given to the best of our knowledge and belief, without guarantee of completeness or accuracy. Images may show special equipment. This is not an offer, but information. Subject to prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,400 mm, total length: 1,000 mm, total height: 950 mm, overall weight: 195 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO 25" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Standart Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) "R-PRO" Optional Features - Ribbing Attachments (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Dijital Encoder (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Circular Saw (Optional) (R-Pro 25 Plus) - Manual Guillotine Shear (Optional) (R-Pro MAX) Fgjdpfx Agshpuhto Ajc - Sliding Shear (Optional) (R-Pro DUO) Please contact us for more information and prices...

Condition: good (used), Year of construction: 2012, fuel type: electric, immediately operational condition, duplex lifting mast, without sideshift but control circuit available, 13795 hours. May change with use The battery from 2014 was regenerated by a specialist company in 2023, and some cells were also replaced 80 V, lifting height 3300 mm. Fork length 1600 mm Fedpsiqpp Sofx Ag Ajgc Forward-backward control via foot pedal as with Linde

Condition: new, Year of construction: 2019, operating hours: 174 h, load capacity: 8,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, Manufacturer + model: KALMAR ECG 80 - 6 Mast: 3F4700 ID: 25106.8337 Category: Demo Mast: 3F4700 Forks: 2400 mm Lowered height: 2750 mm Lifting height: 4700 mm Capacity: 8000 kg Year: 2019 Operating hours: 174 hours Battery: 80 V / 1550 Ah - Year 2019 Options - FULL cabin (safety gates) - Joystick control forwards/backwards - Spreader / sideshift - Complete road lighting!! - LED work lamp - Triplex FFL mast - Flashing beacon Fodpfxjzafvce Ag Asgc Complete, LIKE NEW!!!!

Condition: like new (used), Year of construction: 2015, operating hours: 7,366 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: diesel, mast type: duplex, construction height: 2,120 mm, Manufacturer + Model: LINDE E 16 PL - 386 * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25012.5143 Category: Used Mast: 2F Lowered Height: 2,120 mm Lifting Height: 3,140 mm Capacity: 1,600 kg Year: 2015 Operating Hours: 7,366 h Battery: Completely NEW * 48v/625Ah * Year 2025 Options: CONTAINER specification!! * EX * Proplan!!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Fjdpfozafulex Ag Aegc Temperature class = T4 Equipped with: - Complete road lighting - Additional spotlights - Joystick control forwards/backwards - 2D - FFL mast - New tyres (ATEX specification)

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. Fodpfofxygwox Ag Asgc After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: good (used), functionality: fully functional, Year of construction: 2016, load capacity: 1,500 kg, The front forklift from YALE is for sale: Load center: 500mm Year of manufacture: 2016, with approximately 1600 operating hours Engine: Electric AC, 1 x 4.8kW Drum brake Mast: Mast type: Triplex Lifting height: 4300mm Overall height: 1980mm Free lift: 1472mm Fork carriage: FEM 2 A/910, wide Mast tilt: forward: 5 degrees Fgedpfx Agey Ugnws Aec backward: 5 degrees

Condition: new, functionality: fully functional, machine/vehicle number: HR14942, Year of construction: 2024, load capacity: 7,000 kg, lifting height: 4,705 mm, free lift: 1,440 mm, fuel type: diesel, mast type: triplex, construction height: 2,605 mm, power: 55 kW (74.78 HP), fork carriage width: 1,980 mm, fork length: 2,400 mm, empty load weight: 10,191 kg, total length: 3,677 mm, drive type: Diesel, construction width: 2,082 mm, Diesel forklift Chassis number: HR14942 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Techtronix 332 3-Speed Condition: New unit Technical condition: New Fgjdpjw Ezyvofx Ag Aec Front tire type: Superelastic Front tire size: 8.25x15 Front tire condition: New Rear tire type: Superelastic Rear tire size: 8.25x15 Rear tire condition: New Sideshift, 3rd valve, 4th valve, rear work light, front work light, full cabin, CE certificate, twin tires, rotating beacon, windshield wiper, LED, seat, Hose group with 4-way Accutouch mini-lever hydraulic controls, mast tilt 10° forward / 5° backward, Red seatbelt with restraint system, High-performance air intake with pre-cleaner, Acoustic alarm -- activated in reverse -- 82–102 dB(A), self-adjusting, Speed limiter preset to 13 km/h (adjustable)