Used Lizzini Ig-Fl for sale (5,717)

Condition: good (used), Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor Kjdpfx Aehz Utkeccjdl -Rotary valve: 4 wings -Drive motor/gearbox: Nord 0.55 kW / 26 rpm -Inlet opening: Ø 500 mm -Outlet: 500 x 500 mm -Total dimensions: 1290/800/H1540 mm -Weight: 244 kg

Condition: used, Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor -Impeller: for cellular wheel sluice, 8-wing Kdodpfsl A Azcsx Accsl -Cell wheel: Ø 200 x 220 mm, dimensions see photos -Total dimensions: 625/200/H200 mm -Weight: 12.1 kg

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Rotary valve: 6 blades -Drive motor: Leroy Somer 1.1 kW -Gearbox: Leroy Somer i = 1:30 -Speed: 1420/47 rpm -Inlet opening: 245 x 230 mm Kdedpfx Ashfufnoccel -Outlet: Ø 90/55 mm -Transport dimensions: 850/670 / H560 mm -Weight: 132 kg

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Cell wheel lock. 6-blade, without drive -Type: Ecluse 400x400 Kdodpfewnn Aiox Accjl -Inlet opening: 400 x 390 mm -Outlet: 400 x 280 mm -Shaft: Ø 30 x 105 mm -Dimensions: 620/500/H650 mm -Weight: 89 kg

Condition: used, Dosing rotary valve, rotary valve, dosing lock, rotary valve for conveyor screw, transport screw, screw conveyor, conveyor technology, pipe conveyor screw -Manufacturer: Torex, 8-blade rotary valve with gear -Inlet opening: Ø 265 mm -Outlet: 250 x 245 mm -Transmission: Motovario i= 50 Kjdpfx Ajnzpyksccjdl -Drive shaft: see photos for dimensions -Dimensions: 540/410/H360 mm -Weight: 100 kg

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition As is Available immediately Kdsdpoiy Dtbsfx Accel

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm Kedpspyg Tbsfx Accsdl  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control

Condition: good (used), Year of construction: 2020, operating hours: 731 h, functionality: fully functional, machine/vehicle number: WSVT4H7RSL1500083, power: 55.16 kW (75.00 HP), first registration: 09/2020, fuel type: diesel, color: orange, tire size: 255/65 R16, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Equipment: additional headlights, hydraulics, Model designation: Aebi Schmidt Multigo 150 Year of manufacture: 2020 Serial number: WSVT4H7RSL1500083 Tyres: Wide tyres 255/65 R16 Operating hours: 731 Application areas: Winter service, street cleaning, sidewalk cleaning, and more. - 40 km/h road speed - Front-mounted lift with hydraulic floating position control - Perkins 4-cylinder engine (75 hp) - ISRI air-suspended driver's seat - Heated side mirrors - Rear area monitoring with infrared night vision camera + monitor - Additional LED work lights - 1.5 m³ aluminium debris hopper with recirculating water system - Sweeper unit: 2-brush system (trailing) with suction shaft - 4 m hand suction hose - Stratos S 06 salt spreader (0.6 m³) - Spreading disc with adjustable spreading width from 2–6 m - Snow plough EN15 with 1.5 m working width - Trade-in and purchase of vehicles and machinery possible. - Sales price excludes transport and delivery. - No liability for printing & typographical errors. - Subject to errors, alterations, and prior sale. - Offer subject to change. - All information without guarantee. - No warranty for material defects on used vehicles/equipment. Henne Nutzfahrzeuge GmbH Authorized Mercedes-Benz Unimog general representative JCB sales and service partner Hans-Grade-Straße 2 04509 Wiedemar Marlon Schütz Sales municipal special equipment Kdodpfxsyilbne Accol

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile Kdedpfxsyhzplo Accel ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, Year of construction: 2024, operating hours: 916 h, Equipment: air conditioning, General information Year of manufacture: 2024 Technical information Number of cylinders: 4 Engine capacity: 2.400 cc Kdedpfxjxn S N Rj Accol Chassis type: rigid Steering: skid steer Make of engine: Bobcat Empty weight: 4.898 kg Dimensions (LxBxH): 390 x 186 x 206 cm Functional Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Boom suspension - High Flow - Hydraulic quick coupler - Rubber tracks - Two Speed - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: USA Condition CE type: CE Hydraulic quick coupler, 2 speed, Large display, Rear view camera, Air conditioning, Air suspension seat

Condition: used, Year of construction: 2017, operating hours: 1,907 h, mileage: 1,907 km, power: 15 kW (20.39 HP), first registration: 10/2017, overall weight: 1,900 kg, fuel type: gas, color: red, axle configuration: 4x2, maximum load weight: 800 kg, empty load weight: 1,100 kg, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Equipment: cabin, * German vehicle * 1st hand * Ideal for operation in large halls, logistics and parking garages, as NO exhaust fumes due to gas drive * See photos for condition * Original only 1907 operating hours * Hako Sweepmaster 1500 RH ride-on vacuum sweeper * Working width with 1 side brush 127cm * Area performance theoretically with 1 side brush, main sweeping roller 12.700 m2/H * Working speed 10 Km/h * GAS drive * Central brush rollers * Long, uninterrupted work thanks to filter systems with long service life and large containers * Simple, electronically supported 1-button operation * Maximum machine availability thanks to robust chassis and brush protection against damage * Easy maintenance: The operator platform can be quickly and easily folded up or forward for servicing. * Clean exhaust air and long operating times: Cassette filter system with large filter surface and patented R²S filter cleaning technology. * Simple wear compensation: Adjustment of the main sweeping roller with ABBA system (automatic container-broom adjustment) for a perfect sweeping pattern over the entire service life of the roller. * 250 liter dirt container * Discharge flap at the rear * High discharge for the hopper * Unladen weight: 1,100 kg * Tare weight: 1,900 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Kedpsvhqimsfx Accjdl Subject to alterations, prior sale and errors excepted. - .

Condition: used, empty load weight: 7,070 kg, maximum load weight: 26,930 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/1996, loading space volume: 55 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, BPW axles, air-suspended, lifting+lowering, ABS (anti-lock braking system), walkway, U-protection, lateral aluminum wheel guards, supports Body: Silo trailer with 4 compartments approx. 55m³ 3x 8t BPW axles! Hose holder on both sides! Good condition! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ksdpfx Asvhh Rneccsdl

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels Kdjdpfx Ajxf Sn Ioccjl 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, Year of construction: 2019, For vehicle inquiries, Mr. Seidel will assist you (by phone). Ressenig SATL2-400.1 telescopic low loader—lightly used, extendable low-bed semi-trailer with 2 hydraulically steered 12-ton axle lines. Manufacturer: Ressenig (Austria) Lowbed length: approx. 5,500 mm retracted, approx. 8,500 mm extended First registration: 05/2019 Perm. total weight: 42,000 kg Fifth wheel load: 18,000 kg Rear axle load: 24,000 kg Overall length: approx. 12,860 mm retracted, approx. 15,860 mm extended Unladen weight: 13,180 kg Payload: 28,820 kg Width: 2,550 mm Axles: DL-S axle lines, 12 tons, Tridec independent wheel suspension, hydraulically suspended, hydraulically steered Radio remote control for steering and air suspension Tyres: 245/70 R 17.5 Braking system: BBA air brakes, EBS, spring-loaded actuators on both axles Lowbed: telescopable by 3 meters from 5.50 m to 8.50 m Ramps: electro-hydraulic Additional equipment: Yellow beacon Spare wheel Aluminum bridges for placement into the extended lowbed Red/white extension panels for oversize transport Upon request, we can provide a leasing or financing offer. Mr. Seidel is happy to assist you by phone. For more information, please visit our homepage. ... Subject to errors, changes, and prior sale! = Further information = Please contact Tobias Ebert for additional details. Kdedpfx Acjyfrxnjcel

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-261-04-5659, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 14 m/min, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm PVC/ABS thickness: 3 mm Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min Kdjdoydim Tspfx Accel MACHINE DETAILS Control unit: Power Control Check 20+ Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit

Year of construction: 2026, condition: new, functionality: fully functional, Liquid fertilizer / AHL / ASL - Tank Container Storage tank Storage tank 100,000 liter capacity - brand new - above ground, made of sheet steel. The tank complies with DIN-EN 12285-2 (formerly DIN 6616-D), has 2 saddle feet, a ladder and is primed on the outside - on untreated sheet metal. D = 2.90 m - L = approx. 16.00 m. The container is fitted with a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The plastic inner liner has a "general building authority approval" and is therefore suitable for the storage of liquid fertilizer-AHL and NOx reducing agent AUS 32 (AdBlue). The price is ex works - free loading. (Delivery can be offered at an additional cost). We recommend: Sandblast the outside of the above container, prime and completely repaint - traffic gray / RAL color. (Other RAL colors are also available on request). ASL (ammonium sulphate solution) is a popular liquid fertilizer that is produced in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL containers require a plastic inner liner due to the corrosive properties of the storage medium. Important: The tank shown (sample photo) is a revised 100,000 liter tank that has already been delivered to a customer. The plastic piping (PVC connection) is not included in the scope of delivery and can be purchased for an additional charge. General information: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental systems are also available! In addition, we buy existing tank systems and can empty, clean, dismantle and remove them professionally with certified specialist company qualification in accordance with the WHG (Water Resources Act). ===== If you have any questions, please contact ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Kodpfxei A Hxve Accsdl Tiefenrod 2 34320 Söhrewald near Kassel / Hesse =====

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: AHL-50, tank capacity: 50,000 l, Storage tank to store liquid fertilizer (Ammonium Nitrate Urea solution) Kdodpsb Hpd Rjfx Accol

Condition: new, functionality: fully functional, warranty duration: 6 months, New log carriage, 17° inclined Log length: 2 – 5 m Diameter: 200 – 1000 mm Clamping dogs: 3 units Clamping dog opening: 1000 mm Kedpfoxl Thcsx Accedl Longitudinal adjustment: 1 dog adjustable – 2 dogs fixed Clamping jaw opening: 900 mm Clamping dog adjustment: servo-electric Cable drive: 45 kW

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Clean, strip, remove, demolish, and roughen Kdsdpfov S Ep Asx Accjl The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: new, Year of construction: 2025, PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40L (vertical) PRO-version and AMTEC Shrink Wrapper SIDEshrink W60XL PRO-version. Conveyor speed: 0-30m/min. Adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Max. product dimensions: L(unlimited)xW400xH300mm; tunnel size: L1700xW450xH350mm; machine dimensions: L2200xW1000xH1330mm; power consumption: 380V, 16kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kdsdov Nl Uyspfx Accel

Condition: new, Year of construction: 2025, Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. "Blade Position Adjusting on Power-Off" function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm; sealing bar width: 230mm; max. speed of the machine in neutral: 100 cycles/minute; power: 220V, 3.75kW; infeed length: 3000mm; machine dimensions: L5050xW1190xH1650mm; weight: 1020kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kdodpfsv Nl Iajx Accel

Condition: used, mileage: 29,522 km, power: 75 kW (101.97 HP), first registration: 03/2015, overall weight: 5,000 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 2,350 kg, empty load weight: 2,650 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, onboard computer, parking sensors, power assisted steering, soot filter, trailer coupling, * German vehicle * Documentation available * original ONLY 29,522km * only 5,821 operating hours * Condition, see photos * 4x4 * All-wheel steering * Trailer coupling * from the German premium manufacturer Reinex * Special high-pressure street cleaning * High-pressure system with 300 BAR working pressure * High-pressure hose with high-pressure lance on rear reel * High-pressure wash bar from 1.55 m to 3.60 m * Ideal for footpaths and cycle paths, streets and surface cleaning * Variable operating pressure from 20 - 300 bar * Wash bar can be swiveled hydraulically from the driver's seat * With switchable jet nozzles * Automatic bar control * Distance control through adjustable wheels * Variable volume flow from 60l-230l./min. * Water tank 1,800 liters * Hydrostatic drive * 2 air-sprung comfort seats * Air conditioning * Work lights * GVW 5,000 kg. * Empty weight 2,650 kg. * Payload 2,350 kg. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired. Kodpfxsv Hb D Sj Accjdl   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, maximum load weight: 28,830 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 10/2025, loading space width: 2,480 mm, loading space height: 2,800 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kässbohrer Curtain Sider Trailer, Like New, Fully Equipped * BPW axles with air suspension and disc brakes * Storage box * Spare wheel holder * Air suspension raise/lower Ksdpfxsv Arrrj Accodl * Work lights * Jost landing legs * Pallet box * Tires 385/55 R22.5 - 160 K * Mileage: 107,689 km For further information, we are happy to assist you.

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Kjdpfx Acjwwtpyjcedl

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Ksdpsq A I Aasfx Accjdl