Used Bitzer for sale (58)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,350 kg, total length: 1,869 mm, total width: 720 mm, total height: 776 mm, space requirement length: 2,000 mm, A brand new Bitzer Compact Screw ( UNUSED BOX PIECE) CSH93 Series CSH9593-300Y-40D compressor comes with: 300w Oil Heater, Oil Separator, Oil Filter, Discharge Gas Temperature, Start Unloading, Capacity Control 4 Step 100-75-50-25%, Capacity Control Infinate 100-25%, Built in check valve, SE-E1 Protection Device. The optional extras available for this model are: « Specialist Lift and Shift Service (UK Only). « Bitzer BSE170 Ester Oil. « Oil Level Switch min/max OLC-D1-S. « Discharge Shut Off Valve. « Suction Shut Off Valve. « Shut Off Valve for ECO with Muffler. « Liquid Injection with integrated nozzle. « Bridges for D.O.L. start. « Vibration dampers. « Motor Protection SEi1 (200v-690v) « Alternative Motor Connections. Cedpfx Asxb D N Nsddoaa « Range of Alternative Voltage Motors.

Condition: excellent (used), Bitzer Here we offer you a refrigeration unit. Was built but never used Starting current (rotor blocked) 135/220 A Supply voltage 400/3/50 V/Ph/Hz max. operating current 53 A max. power consumption 30.1 kW delivery volume: 101.10 m³/h (HD) 50,50 m³/h (MD) Motor (nominal): 30 HP 22 kW Oil filling BSE32 Option: BSE55 at R134a, tc > 70°C Oil quantity 4,75 l Refrigerant R452A Reverse osmosis filter and humidification system included Reverse oasmosis data: Permalefficiency 10 l/h Cjdehwmtvjpfx Addsaa Feed water requirement 40 l/h Operating pressure 14 bar Dimension: 500*600*295 mm H*W*D Type: BS6 S6F-30.2Y-40P + Bitzer condenser water cooled K573H + RO20 Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW Cedpfxsx Ap Hpo Addjaa -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: used, Year of construction: 2006, functionality: fully functional, Bitzer chiller unit. With control cabinet. Specification: Flow rate: 315 m3/h Permissible operating pressure: 17 bar Medium: R134A Caedpfxew N Rdkj Addsa The Bitzer KWR W250 KS chiller unit delivers reliable cooling performance for industrial applications. With robust construction, efficient refrigeration, and flexible integration capabilities, the system can be seamlessly incorporated into existing installations. Ideal for process, machinery, and building cooling in industrial environments.

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3T001026, overall weight: 240 kg, volume flow: 42.3 m³/h, Equipment: type plate available, 🧊 Refrigeration Compressor S4G-12.2Y-40P – Refurbished, 12-Month Warranty Manufacturer: BITZER Model: S4G-12.2Y-40P Capacity: 42.3 m³/h Condition: Fully refurbished Warranty: 12 months Availability: Immediate delivery Description Compressland offers for sale a two-stage piston compressor Bitzer S4G-12.2Y-40P, fully and professionally refurbished. The unit has been thoroughly inspected, tested, and restored to full operational condition. Why choose our compressors? ✅ Comprehensive refurbishment – all worn components are replaced, including pressure and performance testing. ✅ High efficiency and savings – compressors operate like new, with lower energy consumption. ✅ Quality assurance – each unit undergoes stringent testing and includes a 12-month warranty. ✅ Environmentally friendly solution – refurbishment means a reduced carbon footprint and responsible resource use. Additional Information Casdpfx Adexr T N Hsdoa We also offer other refurbished piston and screw compressors. Contact us – we will help you select the right unit for your refrigeration system.

Condition: used, functionality: fully functional, All our systems are fully operational. For more details, please contact us. Caodpfoxvw Tqsx Addja We have a wide range of compressors/compound units available. Feel free to get in touch, and we will send you a list of our compressors.

Condition: ready for operation (used), Chiller Bitzer Compressors type: CSH8571-110Y (x2) Volume: 410 m3/h (x2) Compressors cooling capacity for R134a: 456 kW at 0°C/40°C, 370 kW at -5°C/40°C, 295 kW at -10°C/40°C Unit was working on R134a Plate heat exchangers, freon tanks Shell and tube heat exchanger Control cabine Dimensions: 4300 x 1650 x 2100 mm Stock status: 2 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker. Cedsilltuepfx Addeaa

Condition: new, overall weight: 470 kg, New Bitzer open screw compressor. Cedpfx Adof Ryx Ijdjaa 1 pieces in stock. type OSNA 8571-k

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Casdpfx Adjrz R Arjdsa Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: used, Year of construction: 2006, functionality: fully functional, Bitzer chiller with control cabinet. Specification: Flow rate: 315 m3/h Permissible operating pressure: 17 bar Medium: R134A Cedpfxow N Rhco Addeaa The Bitzer KWR W250 KS chiller delivers stable cooling performance for industrial applications. Featuring a robust design, efficient refrigeration, and flexible integration options, the system can be easily incorporated into existing plants. Ideally suited for process, machinery, and building cooling in industrial environments.

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1072601855, overall weight: 326 kg, total length: 1,200 mm, total width: 450 mm, total height: 400 mm, Equipment: type plate available, Bitzer HSN7471-75-40P 250 m3/h – compressor after general overhaul, 12-month warranty! Refrigerant: Freon kW at -20ºC/+40ºC: 92.3 kW at -30ºC/+40ºC: 57.7 kW at -40ºC/+40ºC: 33.9 kW at -45ºC/+40ºC: 25.1 Capacity: 250 m3/h Regeneration of reciprocating and screw refrigeration compressors – Compressland Company Description: Compressland specializes in comprehensive regeneration of reciprocating and screw refrigeration compressors. Thanks to many years of experience and cooperation with leading manufacturers in the market, we guarantee the highest quality of service and the reliability of our solutions. Scope of services: 🔧 General overhauls of refrigeration compressors ⚙️ Rewinding of electric motors 🧰 Technical inspections and compressor service 🛢️ Sale of spare parts and refrigeration oil Why choose us: Authorized partner of Frascold, Bitzer, and Bock Cajdjxrc Daepfx Addja Guaranteed quality and professional advice Short lead times Possibility of transport and equipment pick-up

Condition: used, functionality: fully functional, Complete cooling installation for 600m2 cooling area / 2400m³ Csdpext Ek Esfx Addoaa Completely in working order. 3x Bitzer 6G-30.2 Y 40P (3x 126,8m3/H) 2x Bitzer 4H-15.2 Y 40P (2x 73.6m3/h) 3x Danfoss VLT5042 6x Searle evaporator km175-6 AL 9x Searle evaporator DSR68-3 AL 1x Searle evaporator DSR 116-3 AL 1x Searle 3 fan condensor MDR90-6 (on roof) 2x Searle 2 fan condensor (on roof) 2x Minimep EIREHA monitoring

Condition: used, Used Complet Bitzer Co2 Cooling installation for processing rooms and or corridors This unit, in excellent condition, is equipped with the following main components: 1. Compressors Rack Teko ROXSTA 2.O, with 4x Co2 Compressors Bitzer 4DTC-25K-40P, and 1x Co2 Compressor 4FTE-20K-40S, and original control cabinet - Compressors Type: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Volume: 21.2 m3/h (x4), 17.5 m3/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Dimensions of the compressors rack: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of production : 2018 2. Evaporators - 5 pieces Guntner S-DHN 051C/24 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-DHN 051C/24- - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface: 101.9 m2 - Air flow: 11 240 m3/h - Fin spinning: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2019 - Volume: 25.7 L - Weight: 149 kg - Quantity : 5 pieces - Year of production : 2019 Cajdpexpvtcsfx Addoa 3. Evaporators - 3 pieces Guntner S-CXDHN 046C/37 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-CXDHN 046C/37 - Cooling capacity: 21.9 kW przy DT8, 17.7 kW przy DT7 - Fin spinning: 7 mm - Fans: 3 x 460 mm - Dimensions: 2950 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2021 - Volume: 29.9 L - Quantity: 3 pieces - Year of production : 2021 4. Evaporators - 1 pieces Guntner S-CXDHN 046C/37 dual discharge, - Type: GADC CX 035.1/41M/HEC7E.TNNN - Fin spinning: 7 mm - Fans: 4 x 350 mm - Dimensions: 3150 x 1000 x 300 mm - Electric defrost - Year of production: 2024 - Volume: 14.2 L - Quantity : 1 piece - Year of production : 2024 5. Evaporators - 4 pieces Guntner GACC CX 040.1/3-70.E-1845718M, standart cubic evaporators - Type: GACC CX 040.1/3-70.E-1845718M - Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 - Surface: 63.3 m2 - Air flow: 8 640 m3/h - Fin spinning: 7 mm - Fans: 3 x 400 mm - Dimensions: 2370 x 550 x 580 mm - Electric defrost - Year of production: 2019 - Volume: 11.1 L - Weight: 114 kg - Quantity : 4 pieces - Year of production : 2019 6. Gascooler Guntner GVD080.4C/2x3-EK.E, V-shape - Type : GVD080.4C/2x3-EK.E - Year of construction : 2018 - Volume : 60,2 ltr - Fans: 6x 800 mm, 490 RPM, with inverter - Dimensions: 4500 x 2320 x 2850 mm

Condition: new, Year of construction: 2016, new Bitzer screw compressor. Caodpeg Tif Ijfx Addja Year of construction 2016 new in original packaging. NOS from warehouse

Condition: new, functionality: fully functional, Manufacturer: Bitzer Model: 2JES-07Y-40S Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 400V / 3Ph / 50Hz Shipping Weight: 50 kg Net Weight: 43 kg Compressor Details: • Type: Semi-Hermetic Piston Compressor • Series: CE1 • Number of Cylinders: 2 • Flow Volume: 5.21 m³/h Cajdpowudyqsfx Addsa • Compression Type: Piston • Oil Type: BSE32 (BSE55 for R134a, R450A, R513A, R1234yf if tc > 70°C) • Oil Charge: 1.0 L Electrical Data: • Starting Current (LRA): 14.8 A • Max Operating Current: 3.7 A • Max Power Consumption: 1.9 kW Refrigerant Compatibility: R134a, R450A, R513A, R1234yf, R404A/R507A, R448A/R449A, R454C, R455A, R407F Pipe Connections: • Suction Line: 16.0 mm (5/8") • Pressure Line: 12.0 mm (1/2") Sound Power Level: 63.0 dB(A) at +5°C / 50°C Dimensions: • Width: 220 mm • Height: 273 mm • Depth: 343 mm Application: This compact and powerful Bitzer semi-hermetic piston compressor is ideal for commercial and industrial refrigeration systems. Compatible with a wide range of modern refrigerants, it's designed for efficient and reliable operation in HVAC, cold storage, and food processing applications.

Condition: used, Year of construction: 2005, functionality: fully functional, Bitzer chiller with control cabinet. Specification: Flow rate: 2–315 m3/h Permissible operating pressure: 24 bar Refrigerant: R134A Caedpjw N Riyjfx Addea Compact description: The Bitzer KWR W500 chiller provides reliable cooling technology for industrial applications. Robust design, efficient cooling performance, and flexible integration into existing systems. Ideal for process, machinery, and building cooling in industrial environments.

Condition: reconditioned (used), functionality: fully functional, overall weight: 1,350 kg, total length: 2,050 mm, total width: 670 mm, total height: 860 mm, volume flow: 805 m³/h, For sale: overhauled refrigeration compressor – fully rebuilt, 12-month warranty! Bitzer CSH9583-210Y-40D 805 m3/h Refrigerant: Freon Caodpfxjxrcmuo Addsa kW at +10ºC/+40ºC: 658.4 kW at 0ºC/+40ºC: 446.0 kW at -5ºC/+40ºC: 362.0 kW at -10ºC/+40ºC: 290.6 kW at -20ºC/+40ºC: 179.2 m3/h: 805.0

Condition: good (used), HRS (Bitzer) 6H25.2Y Compressor Serial: 22JBR25291 Cjdpfjqqht Aex Addoaa Fully rebuilt refrigeration compressor

Condition: used, 1. Compressors Rack Teko ROXSTA 2.O, with 4x Co2 Compressors Bitzer 4DTC-25K-40P, and 1x Co2 Compressor 4FTE-20K-40S, and original control cabinet - Compressors Type: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Volume: 21.2 m3/h (x4), 17.5 m3/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Dimensions of the compressors rack: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of production : 2018 2. Evaporators - 5 pieces Guntner S-DHN 051C/24 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-DHN 051C/24- - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface: 101.9 m2 - Air flow: 11 240 m3/h - Fin spinning: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2019 - Volume: 25.7 L - Weight: 149 kg - Quantity : 5 pieces - Year of production : 2019 3. Evaporators - 3 pieces Guntner S-CXDHN 046C/37 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-CXDHN 046C/37 - Cooling capacity: 21.9 kW przy DT8, 17.7 kW przy DT7 - Fin spinning: 7 mm - Fans: 3 x 460 mm - Dimensions: 2950 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2021 - Volume: 29.9 L - Quantity: 3 pieces - Year of production : 2021 4. Evaporators - 1 pieces Guntner S-CXDHN 046C/37 dual discharge, - Type: GADC CX 035.1/41M/HEC7E.TNNN - Fin spinning: 7 mm Codsxn Nudepfx Addjaa - Fans: 4 x 350 mm - Dimensions: 3150 x 1000 x 300 mm - Electric defrost - Year of production: 2024 - Volume: 14.2 L - Quantity : 1 piece - Year of production : 2024 5. Evaporators - 4 pieces Guntner GACC CX 040.1/3-70.E-1845718M, standart cubic evaporators - Type: GACC CX 040.1/3-70.E-1845718M - Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 - Surface: 63.3 m2 - Air flow: 8 640 m3/h - Fin spinning: 7 mm - Fans: 3 x 400 mm - Dimensions: 2370 x 550 x 580 mm - Electric defrost - Year of production: 2019 - Volume: 11.1 L - Weight: 114 kg - Quantity : 4 pieces - Year of production : 2019 6. Gascooler Guntner GVD080.4C/2x3-EK.E, V-shape - Type : GVD080.4C/2x3-EK.E - Year of construction : 2018 - Volume : 60,2 ltr - Fans: 6x 800 mm, 490 RPM, with inverter - Dimensions: 4500 x 2320 x 2850 mm

Year of construction: 2006, condition: used, functionality: fully functional, The unit is refrigerant-free and fully filled with nitrogen. Including control cabinet. Specification: Flow rate: 315 m3/h Permissible operating pressure: 17 bar Cajdpfxowu A Duj Addoa The Reisner chiller, equipped with two Bitzer compressors of the type KWR W250KS, is a reliable and efficient solution for air conditioning and cooling in industrial applications. The system is characterized by its robust construction and high performance to ensure constant and stable temperatures. With the powerful Bitzer compressors, the chiller provides efficient cooling performance with low energy consumption.

Condition: used, Compressor Bitzer -Type: 6F-50.2Y-40P -Volume: 151.6 m3/h -Cooling capacity: 101.3 kW at -5°C/40°C, 83.6 kW at -10°C/40°C, 43.5 kW at -25°C/40°C -Refrigerant: R404A -Quantity in stock: 2 Casdpoxlh Tgofx Addja -Reference number: S 244 -Condition: Used in very good condition, ready to work

Condition: used, Year of construction: 2005, functionality: fully functional, Bitzer chiller with control cabinet. Specification: Casdpew N Ri Tsfx Addea Flow rate: 2–315 m³/h Permissible operating pressure: 24 bar Medium: R134A Brief description: The Bitzer KWR W500 chiller delivers reliable cooling technology for industrial applications. Robust construction, efficient refrigeration performance, and flexible integration into existing systems. Ideal for process, machinery, and building cooling in industrial environments.

Condition: used, Year of construction: 2006, functionality: fully functional, Bitzer chiller unit with control cabinet. Specification: Flow rate: 315 m3/h Permissible operating pressure: 17 bar Refrigerant: R134A The Bitzer KWR W250 KS chiller provides consistently reliable cooling performance in industrial applications. Thanks to its robust construction, efficient cooling generation, and flexible integration options, the system can be easily incorporated into existing plants. Ideally suited for process, machinery, and building cooling in industrial environments. Casdpfx Aow N Rh Noddea

Condition: used, Year of construction: 2005, functionality: fully functional, Bitzer chiller unit with control cabinet. Specification: Flow rate: 2–315 m3/h Permissible operating pressure: 24 bar Refrigerant: R134A Cajdpfow N Rb Njx Addsa Compact description: The Bitzer KWR W5000 chiller offers reliable cooling technology for industrial applications. Robust construction, efficient cooling generation, and flexible integration into existing systems. Ideal for process, machinery, and building cooling in industrial environments.

Condition: used, Year of construction: 2006, functionality: fully functional, Bitzer chiller with control cabinet. Csdjw N Rgfjpfx Addsaa Specification: Flow rate: 315 m3/h Maximum operating pressure: 17 bar Refrigerant: R134A The Bitzer KWR W250 KS chiller offers reliable cooling performance for industrial applications. Thanks to its robust construction, efficient refrigeration, and flexible integration capabilities, this system can be easily incorporated into existing installations. Ideally suited for process, machine, and building cooling in industrial environments.