Used Log Band Saw / Panel Saw for sale (19,270)

Condition: used, Year of construction: 2026, The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Redpfszp Elhjx Andecd Weight [kg] gross/net – 210 / 180 kg PLEASE NOTE!! This machine is a return item. It has been used a little but is in working order. NO WARRANTY!!

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Rcsdozn N Ikopfx Andod

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Rsdpfxozquyws Andscd Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, functionality: fully functional, HOMAG OPT HKL 11/43/22 – available in September! Currently in production. Bonus: 4 roll conveyors, each 4 meters long included! Technical Data Saw blade projection: 125 mm Redpfx Ajzpxlbendjcd Cutting length / width: 4300 mm / 2200 mm Max. stack height without pit: 680 mm Max. stack height with pit: 880 mm Main saw motor: 18.0 kW / 25.0 HP Scoring saw motor: 2.2 kW / 3.0 HP Saw carriage speed: 5–130 m/min Program fences speed: 80–140 m/min Total air volume (at 6 bar): 60 l/min Air pressure required: 6 bar Total connected load: 58 kW Extraction: 10,000 m³/h (≈26 m/s) Operating voltage: 3 × 400 V, 50 Hz Control voltages: 230 V / 24 V Installed power: 63.9 kW Rated current: 115 A Main fuse: 125 A Motor protection: IP54

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Rcsdpfxjzp Nt Aj Andjd Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2018, I sell the panel beam saw Giben Prisma Evo SP H90. Year 2018. Cutting size 3800 x 3800mm. Cutting height 90mm. Main motor 7,5kW Scoring motor 2,2kW Rcsdpfx Aezp R Smsndjd Total area covered W.6500mm x D.7700mm Gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Label printer with software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Tool steel Copper Aluminium Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Rcodpfxjzpx Ips Andjd Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg IMPORTANT NOTICE: This machine is an ex-display unit. It has been tested and is fully operational. NO WARRANTY.

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-95-7986, Used HPP 300/43/43 panel saw, refurbished PERMANENTLY INTEGRATED FEATURES: • Saw blade overhang 80 mm • Cutting length 4300 mm • Right-hand machine • Machine table in the cutting line with air cushion table • 4 tables • Smooth control of the clamping beam • 7 clamps • Main saw motor power: 11 KW • Scoring saw motor power: 1.5 KW • Labeling software • Saw carriage speed 130 m/min • ECO Plus technology allowing up to 20% energy saving MACHINE OPERATION: • Operating panel • CADMATIC 5 ADDITIONAL INFORMATION: • Data transfer via WLAN + USB • Label printer • Power Concept DOCUMENTATION: • Available languages: German, English • Format: Data carrier + paper documentation GENERAL INFORMATION: • POWERCONTROL control with POWERTOUCH system • CE marking: YES • Operating condition: undergoing overhaul, ready for demonstration: September 2026 ----- Rjdpfx Aey A Rgaendjcd HPP 300/43/43 panel saw Machine operation: * Saw blade overhang 80 mm * Cutting length 4,300 mm * Right-hand design * Machine table in the cutting line with air cushion table * 4 tables * Stepless clamping beam control * 7 clamps * Main saw motor power: 11 kW * Scoring saw motor power: 1.5 kW * Labeling software * Speed of the saw carriage: 130 m/min * ECO-Plus technology for saving up to 20% energy consumption Machine operation: * Control panel * CADMATIC 5 Additional information: * Data transfer via WLAN + USB * Label printer * Power Concept Documentation: * Available languages: German, English * Format: Data carrier + paper documentation General information: * POWERCONTROL control with POWERTOUCH system * CE marking: Yes * Operating condition: General overhaul in progress, ready for demonstration from September 2026 Transport, assembly and training by the seller.

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Rcjdpfozl T Hlex Andjd

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm Rodjzlp Thepfx Andscd - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: used, Cutting length 5.300 mm cutting width 2.200 mm Rcsdpfx Aneznnhpodsd engine 5,5 kW material thickness max. 80 mm mm Striebig Type Automat TRK 6220 AV vertical (floor-standing) panel cutting saw with Schneeberger Positron positioning control for precise horizontal and vertical cutting of wood-based, plastic, and composite panels. The automatic version enables efficient, repeatable panel cutting in the furniture, interior finishing, and panel processing industries. Can be freestanding or wall-mounted.

Condition: used, Year of construction: 1998, Sliding carriage: 5000 mm Motor: 11 kW / 15 hp Cutting width: 1050 mm, without scoring blade, prepared for scoring blade Tip Servo Drive Laser-cut seam indicator Rcsdoy Tl Exspfx Anded Electromotive height and swivel adjustment Dimensions: 5000 x 1400 x 1900 mm Weight: approx. 1100 kg Location: Nattheim

Condition: used, Used ERHARD+SPIESS vertical band saw model HK 3C with combined filing device. Throat: 300mm with Ideal band welding device. Rjdowkuytepfx Andecd Saw blade/band length approx. 2,800mm, width 3-10mm Throughput 200mm Cutting speed 9-800m/min, adjustable in steps Drive 1,400 / 2,800 rpm Table angle adjustment: right/left 15° each, forward/backward 10° each Filing machine stroke approx. 0-120mm, workpiece thickness max. 80mm, strokes/minute 75-300 Including 5 file holders with 5 different file shapes Delivery time: from stock. The machine can be inspected by appointment in 713334 Waiblingen Beinstein.

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Rsdpfxsw Dfnhj Andocd Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: excellent (used), Year of construction: 2017, Equipment: CE marking, WELL-MAINTAINED BAND SAW FROM A HOBBY WOODWORKING SHOP, MACHINE BARELY USED Cutting width up to 465 mm (without parallel fence) Cutting width up to 390 mm (with parallel fence) Rcjdpfxjznliqj Andjd Rubber-coated wheels (low noise) Measuring scale on the fence with magnifying glass Aluminum fence with quick-release mechanism Drive motor 2.1 kW (S6 operation), 1.5 kW (S1 operation) 2 band speeds (380 / 820 m/min) Cutting height adjustment via handwheel Saw band width from 6 - 25 mm possible Table can be tilted 0 - 56 degrees Saw band length 3,454 mm 2 dust extraction ports, diameter 100 mm each Weight approx. 170 kg

Condition: good (used), Engine: 18.5 kW Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Rsdoxhb Uvjpfx Andscd Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (year of manufacture 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 1600 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Technical features: Cutting area: approximately 5300 mm in length 1600 mm in height (model 6216) Control: fully electronic positioning and touchscreen operation for serial cuts. Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. Rcodezpbcvjpfx Anded Location: will arrive in week 33 at warehouse 54634 Bitburg.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 400 mm, Offer for automatic bandsaw SBA 361: P-CNC-FORTE-SBA361 Dear Ladies and Gentlemen, We are pleased to be able to offer you our high-quality FORTE SBA 361 automatic band saw from 2002. The machine is in used condition. Technical data - Maximum workpiece diameter: 400mm - Rcedpfxst I Emve Anded Feed roller conveyor - Automatic with bar feed - Space requirement approx. (height/length/width): 270 cm / 500 cm / 300 cm Price net 26.000 € VHB

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Rcodomrp Tlspfx Andod CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. Rjdpfxjudi Uzo Andecd The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Redpfoudi Unox Andocd Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Rcedpoyv Ai Hefx Andsd Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Condition: new, Year of construction: 2026, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 890 mm Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Rsdpfx Anofy Ttiodecd Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 For more information please visit our web page or contact us

Condition: new, Year of construction: 2026, The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. Rcsdpfxomrnk Es Anded The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: new, Year of construction: 2026, The CORMAK MCB350HD Metal Band Saw is a professional-grade metal cutting machine designed for precise mitre cutting from -45° to +60°. Equipped with a heavy-duty cast iron saw bow and a gravity-fed hydraulic feed system, it is ideal for both small-batch and high-volume production. Its rigid construction and premium components enable efficient cutting of structural steel, stainless steel, tool steel, solid bars, pipes, and hollow sections. The machine is equipped with a quick-action vise lever, allowing fast and convenient workpiece clamping. Key Features Mitre cutting range from -45° to +60° – ideal for cutting pipes, profiles, and solid materials at various angles. Heavy-duty cast iron saw bow – provides exceptional rigidity, vibration resistance, and cutting accuracy. Precision blade guidance with carbide inserts – ensures accurate blade tracking while extending blade service life. Automatic shut-off after cutting – improves operator safety and reduces unnecessary power consumption. Gravity-fed hydraulic feed system – delivers smooth, continuously adjustable feed pressure throughout the cutting cycle. Construction and Technology The MCB350HD is built around a robust welded steel frame combined with high-quality cast iron components. The 25° inclined saw bow improves cutting efficiency while extending blade life. A durable worm gearbox drive system ensures reliable long-term operation, while the integrated blade tension indicator (dial gauge tension meter) provides precise blade tension adjustment for consistent cutting performance. The machine is also equipped with a blade cleaning brush, a closed-loop coolant system with electric pump, and a material stop with measuring scale, making repetitive cutting to identical lengths quick and accurate. Precision and Performance The CORMAK MCB350HD metal band saw offers two blade speeds of 36 and 72 m/min, allowing the operator to match cutting parameters to different materials. Precision blade guides featuring bearings and carbide inserts ensure straight, accurate cuts while minimizing blade wear. The coolant system delivers emulsion directly to the blade guides, improving cutting conditions, reducing heat generation, and extending tool life. Applications The MCB350HD is designed for manufacturing plants, metal fabrication shops, engineering workshops, and maintenance facilities where reliability, repeatability, and versatility are essential. It is suitable for cutting: Steel pipes Hollow sections Structural profiles Flat bars Solid round and square bars Stainless steel and other ferrous and non-ferrous materials Standard Equipment Blade cleaning brush Coolant system with pump and reservoir Rsdoi D Di Sopfx Andecd Material stop with measuring scale Bi-metal band saw blade Blade and gearbox safety guards Optional Equipment Roller conveyor table for material feeding Additional band saw blades Laser cutting line positioning system Technical Specifications Specification Value Blade dimensions 2950 × 27 × 0.9 mm Blade speed 36 / 72 m/min Minimum cutting diameter Ø 5 mm Minimum workpiece length 100 mm Vise base height 940 mm Total installed power 2.2 kW Drive wheel diameter 330 mm Overall dimensions (L × W × H) 2000 × 1330 × 2020 mm Weight 540 kg