Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 09103, COMANDULLI Model EDILUX 7+4 DX • Belt running direction: RIGHT to LEFT, year of manufacture 2003 #09103 • 7 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 2 pneumatic lower supports / 2 upper supports • Water groove milling support, manual height and side adjustment • Coating support, manual height adjustment • Separate control panel on a swivel arm • Table extension console • Water trough • Machine footprint approx.: 440 x 180 cm • Infeed area approx.: 190 x 60 cm • Outfeed area approx.: 150 x 60 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments & accessories in the pictures are not included with the machine/scope of supply. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness Warranty • Machine sold “as is”, excluding any warranty claims Ndedezz Nfcopfx Ab Ueb Inspection possibility • at the operating site near Cottbus Availability • after delivery of the new machine in December 2026 / January 2027

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2011011, Edge grinding machine, Montresor model Lola 1000 8+6 SX • Belt running direction: LEFT to RIGHT, year of manufacture 2011 #2011011 • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 pneumatic upper chamfer supports • Belt infeed: Calibration/profiling support • Belt outfeed: Water nozzle support • Table extension console, extended • Machine footprint approximately: 610 x 180 cm • Infeed and outfeed path, each 250 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not included with the machine/scope of delivery. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness. Warranty: Njdszwx Huspfx Ab Usdb • Machine sold as is, excluding any warranty claims. Inspection: • Possible at the operating site near Passau. Availability: • After delivery of the new machine in December 2026 / January 2027.

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Ndodpfx Aozyuckob Usb Model: OMEGA 100 Year of manufacture: 2010 Condition: good Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge 1+1 automatic pre-grinding supports 45° 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Finishing grinding support 2 roller tables, each 2m long The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 01810, 7 Face grinding supports 2 Top chamfering tools 2 Bottom chamfering tools 1 Water groove milling support 1 Milling support Infeed and outfeed roller conveyor Nedezy Eh Rspfx Ab Usdb Belt running direction: left to right Water trough

Year of construction: 2016, operating hours: 9,580 h, condition: excellent (used), functionality: fully functional, Edge Polisher Comandulli Musa 7+4 DX Partially processed meters – 5578m Total operating hours – 9580h Working direction: from right to left - Advance/feed speed (conveyor belt) 0–3 m/min - Belt width 600 mm - Working thickness 10–80 mm - Min. working width 80 mm - Max. working width (without bar) 1200 mm - Max. working width (with bar) 3000 mm - Loading plane height 750 mm Aggregates: - Calibrating spindle for vertical and horizontal positioning for a 260 mm diameter flat diamond wheel - Edge polishing spindles no. 7 with floating mechanism – oscillation - Beveling spindles no. 4, the first two beveling spindles (no. 1 upper and no. 1 lower), inclined at 45°, are equipped with the mechanical locking system TMM3. Two spindles at 45° (no. 1 upper and no. 1 lower) for polishing the previously generated bevels. Ndjdozipzgepfx Ab Uob Automatic valves for the water 2 roller tables, 1.5 m each Color touch screen Rated output 22 kW Dimensions (excluding rollers) 5.15 x 1.8 x 1.74 m Weight 4000 kg

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: MACC2020027, We are offering this Montresor Lola 6.4, manufactured in 2020. This machine is in very good condition and is fully operational. The robot shown in the images is not included with the machine. Specifications: * 6 grinding heads * 4 edge breakers * 1 milling unit * 1 sawing unit for automatic water seals * continuous feed with automatic conveyor belt Ndsdpfx Abozvvxxj Ujb Condition: The machine has always been well-maintained and is in excellent working order. Ready for immediate use without any additional investment. Testing is possible by appointment. The machine is available immediately.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; Nedpfjygxc Asx Ab Ujdb - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: used, Year of construction: 1996, machine/vehicle number: -, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, input current: 120 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 400 mm, workpiece width (max.): 2,000 mm, number of axes: 3, overall weight: 35,000 kg, year of last overhaul: 2024, Hello, I have for sale a granite slab polishing line by Breton, as shown in the photos. The line is equipped with 17 heads and is fully operational following a complete overhaul, featuring a new belt, new software, four tables, and a slab dryer at the exit table. Upon purchase, we will demonstrate the machine in operation. We offer the machine with pre-set processing parameters and expertise for achieving a perfect polish, along with access to a proven service team that handled its overhaul. The machine is ready to start work immediately after installation. For any questions, please contact me by phone or email. Nsdey Ewniopfx Ab Uodb

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine with granite structure and 16 spindles equipped with marble polishing plates Passage width: 2,200 mm Nedpjz D S Ivefx Ab Ujdb Automatic centralized lubrication system Optical slab shape detection system with 1 × 1 cm resolution Cleaning spindle Working direction: from right to left On request, the machine can be supplied as a complete line, including loading system, roller conveyors, dryers, waxing machine, film applicator and unloading system.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine in granite configuration with 16 SG-8 spindles Maximum working width: 2,200 mm Automatic centralized lubrication system Nodpfx Ajz D Tamjb Uodb Optical slab shape detection system with 1 × 1 cm resolution Cleaning spindle Working direction: from right to left On request, the machine can be supplied as a complete line, including loading system, roller conveyors, dryers, waxing machine, film applicator and unloading system.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Complete polishing line for slabs still active and fully functional, viewable and equipped with: - automatic loading unit - motorized roller conveyors for automatic slab feeding Ndodpexdnbbefx Ab Uob - combined calibrating/polishing machine with high removal rate polishing spindles equipped with mechatronics for material calibration - equipment for drying by means of ventilation on both surfaces of the slabs - automatic waxing machine - automatic protective film applicator

Condition: used, Year of construction: 2019, machine/vehicle number: 28, functionality: fully functional, operating hours: 3,964 h, input voltage: 380 V, type of input current: three-phase, number of slots in tool magazine: 21, total height: 2,500 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 3,600 mm, table width: 800 mm, Machine offered on behalf of a customer – request the brochure with images & videos and the seller’s contact information. THIBAUT Edge processing center T658, manufactured in 2019, #029 Ndodszu Tltspfx Ab Usb • Toothed / drive belt new, to be replaced in 08/2026 • Grinding, polishing, and satin finishing of: - Straight edges up to 40 cm high - Profiled edges - Curved edges with rollers • Automatic tool changer with ISO 40 mount and pneumatic clamping force • Tool magazine with 21 slots • Operation via touchscreen • Automatic detection of workpiece position and thickness for a maximum of 5 workpieces • Table dimensions 3.60 x 0.80 m with consoles for rotary and lifting table for aligning the workpieces, table with new rubber coating • 4 rows of all-round rollers, height-adjustable • 6 pneumatic cylinders for clamping the workpieces • 4 clamping holders for locking the workpieces • Space requirement approx. 8.0 x 4.0 x 2.5 m • Tools / accessories - 5 planetary grinding heads AR3 with ISO 40 - 8 ISO 40 mounts for rollers 200 mm - 16 ISO 40 mounts for grinding media 100 & 130 mm - 1 ISO 40 mount with disc 300 mm Pricing: • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments, accessories shown in the pictures are not included in the machine/scope of supply. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty: • Machine as is, excluding any warranty claims Inspection possibility: • At the operating site near Kaiserslautern Availability: • Short-term / immediately after consultation

Condition: used, Year of construction: 2009, operating hours: 550 h, functionality: limited functionality, machine/vehicle number: 041, Bridge saw for marble and granite, with rotating and tilting table, new steel foundations for the bridge and table are available. Dimensions: 560 cm long, 460 cm wide, 300 cm high Weight approx. 6160 kg, disc motor inverter, work table with motor drive and tilt adjustment, Nodpfx Abozim Dle Ujdb linear shaping system, disc tilt for bevel cutting.

Year of construction: 2022, operating hours: 728 h, condition: used, functionality: fully functional, saw blade diameter: 625 mm, cutting depth: 215 mm, spindle motor power: 15,000 W, number of axes: 5, Prussiani Engineering ITALIA 5-axis CNC bridge saw, manufactured in 2022, with approximately 728 operating hours. The machine is fully functional and equipped with Fagor CNC control. Designed for precision cutting and processing of marble, granite, natural stone, engineered quartz and ceramic slabs. Key details: Manufacturer: Prussiani Engineering Model: ITALIA Year of manufacture: 2022 Nedpfx Ajz Di Aweb Uedb Operating hours: approximately 728 Machine type: 5-axis CNC bridge saw Control system: Fagor CNC Condition: Used Functionality: Fully functional

Year of construction: 2013, operating hours: 5,200 h, condition: excellent (used), functionality: fully functional, We offer this very good Comandulli SPEEDY SYSTEM D8 automatic stone edge polishing machine, year of construction 2013. Manufacturer: Comandulli Model: SPEEDY SYSTEM D8 Year of construction: 2013 Condition: very good If you have any questions or need more information, feel free to send us a message or give us a call. Nsdpsycxyasfx Ab Usdb

Year of construction: 2003, condition: good (used), functionality: fully functional, Selling GMM Eura 35 2003 Brdige saw. In good working condition. Inclinates cuts. Table rotate and lift. Table dimensions 3500x1800. Available in september 2026. Location Latvia. Nodpezku Unjfx Ab Uodb

Year of construction: 2009, operating hours: 11,720 h, condition: used, functionality: fully functional, machine/vehicle number: 2008/065, 1 thread grinding support, 1 water groove support, 7 face grinding supports, 3 upper chamfers, 3 lower chamfers, table extension console, belt running direction from right to left. Ndsdjw Exx Aspfx Ab Usb

Condition: used, Year of construction: 1996, machine/vehicle number: 544, functionality: fully functional, Multifunction machine for processing natural and artificial stone. Ideal for the tombstone, restoration, and construction sectors. Ndedpfozrabpsx Ab Usb Z-axis height adjustment: 600 mm. X-axis travel: approx. 4500 mm. Pneumatic pressure control (ideal for grinding, polishing, and brushing surfaces). Variable speed drive motor: 250-2950 rpm. Articulated arm locking system. Hydraulic side grinding mechanism. Work table. Marble grinding unit. Granite grinding head.

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Nodpfx Aszz Afieb Usdb Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-cutter 10 end faces 4 chamfers 2 water jets Calibration support Belt feed direction from left to right Nedezpy Dropfx Ab Uedb

Condition: used, functionality: fully functional, COMANDULLI OMEGA 60 SX edge grinding machine for rounding edges. Belt running direction: left to right. Pre-grinding support. Nodjzz Nymopfx Ab Ujdb 1+1 automatic pre-grinding supports at 45°. 6 grinding supports for straight and round edges. 1 upper and 1 lower chamfering support. Water drip unit. 2 roller tables, each 2 m long.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AI/086060718, overall weight: 3,450 kg, total length: 5,500 mm, total width: 2,400 mm, total height: 2,400 mm, operating pressure: 6 bar, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 1,400 rpm, Denver Skema Logic from 2018, in good condition, for automatic and manual operations. New wooden bed has been fitted, cleaned and tested. Front safety photocells can be added on request. Nodpfx Aozcm Uxsb Uodb

Condition: used, Year of construction: 2018, functionality: fully functional, HCU 7/160 Cone Crusher Year of manufacture: 2018 Crusher inlet [mm]: 160 CSS [mm]: 12-32 mm Motor [kW]: 90 Njdpfxjzl N Ule Ab Usdb Hydraulically adjustable gap The crusher produces cubic material and is suitable for the hardest materials. Crusher with oil tank and 90 kW motor Crusher with control cabinet and PC control Galvanized support structure included Machine is fully operational

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, total length: 1,200 mm, total width: 800 mm, overall weight: 100 kg, Equipment: documentation/manual, Hydraulic hand grinder, Hydraulic power unit, 80 liters Motor, 4.0 kW, 380V Speed control via flow regulator, working speed approx. 2500 rpm Central water supply through the shaft Nsdpezv Tagsfx Ab Ujdb Threaded connection: M 24 Length of hydraulic hoses: 13.0 m Weight of the grinder: approx. 3.8 kg

Condition: repair required (used), Year of construction: 1970, functionality: not functional, This is a part of the DKT 900 cone crusher, manufactured by PSP Přerovské strojírny. It is a crusher frame intended for complete reconstruction and repair and is being offered at a liquidation price. Nedezmdlhopfx Ab Uodb Estimated weight: 2,800 kg.