Used Loroch 2004 Loroch Kbn 560 for sale (2,563)

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M08L/8030, Offer Number: M08L/8030 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off , PKO , IFO , Slug feeding possible Make: SAKAMURA Type: BPF560S Constr. year: 1986/08/20 diameter range: 16-34 mm number of dies: 5 number of stations: 6 cutting length: 210 mm shaft length under head: 180 mm output - pieces/min: 55-80 press power: 450 t Nledpswi Uclofx Ab Uog Location: In our warehouse

Condition: good (used), machine/vehicle number: 3399, Year of construction: 2011, load capacity: 15,000 kg, lifting height: 4,010 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,000 mm, total width: 2,550 mm, operation weight: 19,600 kg, additional equipment features: Warning triangle, Dual tread, Centralized greasing system, Front mud guards, Rear mud guards, Weight system, Equipment: lighting, SveTruck 1560 from Uniktruck Nsdpfeyuifdox Ab Uelg Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 315/80-22.5 Wheel size – Steering wheel: 315/80-22.5

Condition: used, Year of construction: 1993, Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 5000kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible. Nlsdpfxezyq Snj Ab Uog

Year of construction: 2006, condition: used, An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement. Nodpfx Aezy Rv Hsb Ujlg

Condition: ready for operation (used), Fibro EM 13.0280.8.122.08.0.0.3 rotary indexing table, serial number: 1656041/1 + Rehfuss FG691 planetary gearbox, serial number: 519035, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Njdpsi D U Nyefx Ab Uolg

Condition: used, Year of construction: 2020, functionality: fully functional, Edgebander SCM K560HP - year 2020. FULL SERVO DRIVES. Serviced by authorized SCM service. Fully functional, currently in operation. Scheduled dismantling of the machine: January/February 2026. Full description of functions in the attached photos. Inspection and testing on site possible. Nedpfx Asxn T Sgob Uelg

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Nedpfx Aexvc Rzeb Uslg Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, table load: 300 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis YCM XV 560A was manufactured in 2011. It features a table size of 700 x 420 mm and impressive X, Y, and Z travels of 560 mm, 410 mm, and 450 mm, respectively. The machine is equipped with an 11 kW spindle power and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the YCM XV 560A vertical machining centre we have for sale. Contact us for further details. Nlsdpfx Abey Duxve Usg • Table size: 700 x 420 mm • Condition: Very good; low hours; used in 1-shift production Technical Specification Through-spindle Coolant No

Condition: used, Die SMIPACK FP 560a ist mit Ihrer kompakte Bauweise besonders für die Verpackung von Lebensmitteln, CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the SMIPACK FP 560a is particularly suitable for packaging Food products, CDs, DVDs, books, picture frames or other compact items. Winkelschweissmaschine mit Schrumpftunnel - Shrinkwrapper with Shrink Tunnel SMIPACK FP 560a - T450 Baujahr / Year 2017 - Serial-No. 64231 Schweißrahmen max. 560 x 430mm Njdozhmgdopfx Ab Uslg Produkthöhe / Product high max. 230mm Folienbreite / Foil width max. 600mm Folienrollendurchmesser / Foil Roll Diameter max. 300mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 600-1200 PCs/hour Maschinen Abmessungen / Machine dimensions L 2.020 x W 790 x H 1.055mm Maschinengewicht / Machine weight    148 kg Stromanschluss / Power connection     220-240 V, 50-60 Hz Nennleistung / Rated power 2.500W Nennstromstärke / Rated current 12 A Universal-Schrumpftunnel SMIPACK T 450 Produkthöhe / Product high max. 230mm Produktbreite / Product width max. 400mm Bandgeschwindigkeit / Band Speed 3 - 18m/min. Tunnel-Abschaltautomatik / Automatic tunnel shut-off Digitale Tunneltemperatureinstellung / Digital tunnel temperature setting Geschwindigkeit des Tunnelförderbandes stufenlos regulierbar / Tunnel conveyor belt speed continuously adjustable Abmessungen Maschine o. Auslaufband, L x B x H 1.310 x 835 x 1.440 mm Nettogewicht Maschine 187kg Stromanschluss 380-415V, 50-60 Hz Nennleistung 8.000 W / Power connection 380–415 V, 50–60 Hz; rated power 8,000 W Mit der SMIPACK FP 560 A lassen sich sowohl PVC-, PE-, PO-, LDPE-, OPP-, CCP-Folien, alle siegelfähigen Feinschrumpffolien, als auch mikroperforierte und lebensmitteltaugliche Folien verarbeiten. The SMIPACK FP 560 A can process PVC, PE, PO, LDPE, OPP, and CCP films, as well as all sealable fine shrink films, micro-perforated films, and food-grade films. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 560 mm -Wall thickness: 16 mm -Length: 2880 mm -Number: 3x steel pipes available -Price: per piece -Weight: 214 kg/m² Nlsdpozfafhsfx Ab Usg

Condition: used, Stainless steel couplings, pipe coupling Nlodocilltopfx Ab Ueg -Type: GRIP E W5 -Inside: Ø 60.3 mm -From: 59.5 to: 61.0 mm -Pressure: 16 bar -Price: per piece -Number: 10x available -Dimensions: 85/95/H78 mm -Weight: 0.6 kg/piece

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.55 kW 2700 rpm at 50 Hz Nlsdpfob A Tcrjx Ab Ueg -Power: 0.95 kW 5360 rpm at 100 Hz -Voltage: 220/380 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 175 mm -Number: 4x engines available -Price: per piece -Dimensions: 430/170/H185 mm -Weight: 15 kg

Condition: used, Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Measuring range: 35-60mm Nljdpfx Abjl Ha R Rs Ujg -Dimensions: 115/450/H60 mm -Weight 1.6kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Njdegrzvkjpfx Ab Uslg -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Condition: excellent (used), Length: 5600 mm Transport height: 1800 mm Speed: 5-25 m/min Nodpfx Abjd Ti T Eo Uelg

Condition: good (used), Flux F560-S3 high viscosity pump Nlsdpfxjqqht Re Ab Ueg Sanitary high viscosity pump, on mobile skid

Condition: excellent (used), Inkjet printers Videojet 1520/1560/1630 different models available Type 1520 Type 1560 Type 1630 diverse consumables available (1 pallet) Total of 25 units!!! Sale only as a complete lot!!! Nlodpfxevmdw Uj Ab Ujg Very good condition, directly from production!!!

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine Nledpeu Drugofx Ab Ueg -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Condition: used, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor Nledpodl E Ikjfx Ab Usg -Power: 1.03kW -Voltage: 176V -Speed: 2000 rpm -Shaft: Ø 19 mm -Type: B5 -Protection class: IP 44 -Number: 1x motor available -Dimensions: 385/120/H180 mm -Weight: 15kg

Condition: used, Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm Nedpfxodntfvj Ab Ujlg -Weight: 0.5 kg

Condition: good (used), Year of construction: 1996, machine/vehicle number: 090171, Offer 26222 Technical data: - Pressing force: 200 t - Working width: 4100 mm - Distance between uprights: 3050 mm - Table width: 220 mm - Overhang: 500 mm - Installation height: 550 mm - Approach speed: 80 mm/s - Working speed: 0 to 7 mm/s - Retraction speed: 70 mm/s - Stroke: 300 mm - Pneumatic connection Nsdpezuziaefx Ab Ujlg - Drive: 400 V / 18 kW - Space requirement: approx. W 4800 x H 3150 x D 2200 mm - Weight: approx. 17000 kg - Includes: - Swivel arm – Control panel with DELEM DA 65 control, year of manufacture 2009 - Safety light curtain - Motorized back gauge - Punch and universal die - Two-hand control panel with foot pedal

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Nlsdpfjzizmbox Ab Usg Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: new, Year of construction: 2025, neu 2025 080091 prompt, Zwischenverkauf v Türkei 51120 € 966.17 € 1 60 to 2550 mm Y1 / Y2 und X Achse 160 mm 2150 mm 250 mm Nodswva Igjpfx Ab Uolg 350 mm hydraulisch 120 mm/s 9 mm/s 70 mm/s 620 (mit optionaler R-Ach mm 250 mm/s 813 mm 104 mm 100 l 5.5 kW 3250 mm 1200 mm 2350 mm 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH (sample photo shows mod. PBF 30200) OPTIONS: CNC controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Condition: ready for operation (used), Siemens stator for 1FT6105-1AC71 servo motor, serial number: YFSN31215601002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nodpfx Ajzg Sbdsb Uslg

Condition: used, Year of construction: 2017, operating hours: 999 h, power: 285 kW (387.49 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, Operating hours cannot be read. Vehicle is not ready for operation!! * John Deere control system with telematics system Nlsdpfx Abozrkpqe Ueg * Automatic climate control * Hands-free system * Rear-view camera system with external monitor * 2 seats Vehicle number: 12301 Errors and prior sale excepted.