Internal fine measuring device 35-60 mm

WMW INTOC 35-60 mm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm Dodpfxsylw Stj Aa Njkl • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm Dsdpfx Asw Intaea Nekl --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: good (used), Year of construction: 1975, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 KW, working high 800 mm, back gauge 700 mm motorised, footpedal, 3 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Dkodevvwdyepfx Aa Nol

Condition: good (used), x-way 410 mm y-way 310 mm z-way 400 mm Dksdoi Elydspfx Aa Nsl taper of the main spindle SK 40 table clamping surface 700 x 280 mm speed 45 - 2000 rpm quill stroke 63 mm total power requirement 2,2 kW Machine weight approx. 1300 kg space requirement approx. 2,1 x 2,1 x 1,7 m Voltage 400 V 3-axis digital display Heidenhain Fixed angle table Coolant device Vertical milling head swiveling

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Dedpfx Aox D Ux Tsa Nekl Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Dkjdpforpn Dvex Aa Nol

Condition: good (used), Year of construction: 2000, max. ram stroke 2 - 300 mm groove width 2 - 32 mm power capacity 8 kW no. of strokes 2 - 300 Hub/min throat ca. 300 mm Dksdpfx Aouayiboa Nsl Max. installation height ca. 450 mm automatic feeds 0,01 - 0,15 mm work speed 0 - 30 m/min return speed 30 m/min weight of the machine ca. 2,2 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m The BALZAT keyway jointing machine is characterised by the following advantages: - Infinitely variable adjustment of the jointing speed with constant return, even during the work process - Simple clamping of the workpieces with standard clamping devices, without additional tool holders - Extreme dimensional accuracy thanks to self-centring, centrally arranged blade holders - Feed rate can be changed during the programme sequence - Machine base is also a container for cutting oil - all components are easily accessible and replaceable

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2300 mm Measurements depth 4400 mm Measurements height 3100 mm Machine weight 7000 kg Dedpfox D Narox Aa Nekl Control Unit Model Siemens 840 D Main Drive Spindle speed range 10000 Movement X-Axis Movement 2500 mm Y-Axis Movement 900 mm Z-Axis Movement 850 mm Tools Slots in storage 40 This Hexagon PIONEER 061006 was manufactured in 2013. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Ideal for ensuring product accuracy and consistency. Contact us for more information. Application Types Measuring

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Dkodsxtnn Topfx Aa Nol Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, tank capacity: 500 l, SHW PowerSpeed 5 Travel Ranges • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Speed • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head swivel range (mounting): 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Plate Dedpew I Rz Hefx Aa Nekl • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Splash and Chip Protection • One-sided, with 2 manually sliding doors About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts delivery, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - CNC control modernization ----- _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring and milling machine – used metal milling machine – used metal mill – used metal machining center – used cnc mill – cnc milling machines – milling machinery – large part machining – cnc large part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column-type milling machine