Used Maka Systems Gmbh Moving Beam Bc150T Compact for sale (89,814)

Condition: new, Year of construction: 2025, Minimum requirements for the forklift: 4 wheels; at least 2 tons lifting capacity; an additional oil channel available; fork length not less than 1200 mm; fork cross-section: maximum width 150 mm, maximum thickness 60 mm; minimum fork spacing: 700 mm. Lrjdpfxsxy N Dps Agxop

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Lodpfx Asxy E H Hegxjrp Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Available immediately Lsdpfx Ajxy Idhjgxerp

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Ljdpfx Agsxy Hbxexsrp Place: Austria Available immediately

Condition: like new (used), functionality: fully functional, RMVI-3030-1-015 RMVI-3030-1-014 Lrsdpexy Imiofx Agxep RMVI-3030-1-013 RMVI-3030-1-012 RMVI-3030-1-011 MR-2002-4-27

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Lsdpfxsxy Nkpj Agxsrp Available immediately

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Lredsxy E Evopfx Agxsp Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Lsdpfjxy E Sijx Agxsrp Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Lrsdpfx Agoxy Iikexep Available immediately

Condition: like new (used), functionality: fully functional, Z1015201800 Lsdpfx Ajxy I D Usgxjrp Z1010880270 etc.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: Lrsdpfx Aotq Hkrsgxjp - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Year of construction: 2013, condition: reconditioned (used), We have a KAS C4 compact envelope inserting system, year 2013, available.The total counter is just 629.426 envelopes in its lifetime!!! This envelope inserter can process DL up to C4 envelopes. C4 envelopes with the flap on the long side. Ljdokvpbpepfx Agxjrp Configuration: - Single sheet feeder - Folding feeder in-line - 2 insert feeders (bottom feed) - Envelope section - Conveyor belt We sell this machine after complete maintenance

Year of construction: 2024, condition: new, Beam Cutting Machine with receding beam Cutting Area 1800x1200 mm Cutting force 130 Tons Lrjdpfx Agsim R N Uexep

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. Lredpezmdk Rjfx Agxsp The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter Ledpfx Agszmdiaoxsrp • electrical control unit • compressor.

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) Lsdoyxfrpjpfx Agxjrp ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: excellent (used), I am offering for sale an Agilent Technologies Systems Controller, model 86030-30011. This is an industrial computer designed to work with Agilent's measuring and laboratory equipment. The device is housed in a robust, rack-mountable metal enclosure. Inside, there is a PC equipped with, among other things, a CD-ROM drive and a 3.5" floppy disk drive. Numerous communication ports are available on the rear, allowing it to interface with laboratory devices. Technical specifications: Manufacturer: Agilent Technologies Model: 86030-30011 Serial number: 50860C05 Power supply: 115/230 V AC Frequency: 50/60 Hz Current consumption: 10 A / 5 A Year of manufacture: 2009 (according to the nameplate) Connectors: LAN (RJ-45) VGA PS/2 (keyboard and mouse) COM (RS-232) LPT DAS 1800 interface Additional industrial/specialized connectors Visual condition: Normal signs of use in the form of minor scratches and dirt on the enclosure. The inside of the device appears to be complete. There is a sticker indicating an electrical inspection performed in 2014. Sold without any additional accessories, cables, or software. Included: Lrodszl Hz Aepfx Agxop Agilent Technologies 86030-30011 Controller – exactly as shown in the pictures.

Condition: excellent (used), Catalogue number 7266 TECHNICAL DATA - Shaft width: 530mm - 4-knife shaft - Noise-reducing comb - Shaft guard - Table length: 2900mm - Longer infeed table: 1655mm Ledszlppcopfx Agxsrp - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence - Brake - Extraction port diameter: 140mm - Motor: 4kW - Dimensions (L/W/H): 2900x1000x1210mm - Weight: 695kg ADVANTAGES – German-made – 4-knife shaft – Brake – Noise-reducing comb – Longer infeed table – Unpainted – Used jointer, in very good condition Original photos Start-up video of the machine: youtube.com/watch?v=v_3ECkLDWVI Net price: 18,900 PLN Net price: 4,500 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Ledpoqzx Dbofx Agxerp Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories

Condition: used, Item: A-2600-UF-Microfiltration-Block UF- /Microfiltration Block (Alcalase) 4 X 38-42 m2 DOW Separation Systems Lrjdpfx Aokyu Avegxsp inclusive pumps, tubes and other accessories. To offer 6 pieces identical

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Lrjdpeyq Hgkofx Agxep Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) Lodpfx Agoif Ek Roxsrp (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Ledpfsfnlkwox Agxerp Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Ledpfx Agey Emthexerp - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile Lrodpfx Aezntfmegxop - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg