Used Mazak Qtn 350 - Ii My for sale (8,878)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,169 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,920 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak Vertical Center Nexus 510C-II was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1300 x 550 mm and a maximum table load of 1200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak Vertical Center Nexus 510C-II machine we have for sale. Contact us for further details. - Control System: Mazatrol Matrix Nexus (with Mazak Voice Adviser)- Axis Travel X/Y/Z: 1050 / 510 / 510 mm- Table Dimensions: 1300 x 550 mm- Maximum Table Load: 1200 kg- Spindle Speed: Up to 12000 rpm- Spindle Details: Completely renewed in September 2025 by Mazak factory service (original replacement spindle cartridge, high-precision version, clamping force 10.1 kN, runout 0.002-0.005 mm)- Tool Taper: SK 40 / BT 40- Tool Magazine Capacity: 30 stations- Tool Changer Type: Double gripper changer- Rapid Traverse Rate: Up to 42 m/min- Total Power-On Time: 46722 hours (as of 07.07.2026)- Automatic Operation Time: 17776 hours- Cutting Time: 15817 hours- Pure Cutting Time: 13169 hours- Weight: Approx. 6920 kg- Power Supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA- Control Circuit: AC100V, DC24V- Main Motor: Max. 47 A, 400 V- Included Accessories / Components:* Chip conveyor (chain conveyor) with discharge to chip container* Donaldson Torit DCE oil mist separator* Portable electronic handwheel* Coolant system with spray gun / compressed air gun* Machine vise (NC vise)* Approx. 100 SK 40 tool holders* Tilting chip container (green cart)* Worklight / interior lighting* Full enclosure- Renewed parts during 09/2025 service: Spindle cartridge, rotary joint, non-return valves, filters for air/lubricating oil, oil mist separator element Technical Specification Taper Size SK 40 Nledpfxszl S S Te Aireh

Condition: good (used), Year of construction: 2005, turning length: 200 mm, turning diameter: 350 mm, Used Mazak Multiplex 6300 Max turning diameter approx. Ø 350 mm Max turning length approx. 200 mm Many fine tools included "Auto operation" hours: 76,300 Gantry loader max. 2 x 40 kg 2 spindles, 2 axes per spindle (X/Z), C-axis, M-spindle Portal load and unload table Nodpfx Aioy I Sfuorelh

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system Bidding obligates timely collection by week 4 of 2026! TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm Travel X-axis: 230 mm Travel Z-axis: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder Nledpfex Di Uisx Airsh Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction system High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Chip conveyor

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with driven tools, a parts handling arm, an eye for automatic tool referencing, a chip conveyor, and a material feeder. Commissioned in 11/2014 OSP-P300L CNC control system with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of March 18, 2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours Continuously increasing. Power consumption: 33.1 kVA Technical data Max. swing diameter: 480 mm (approx. depending on the current design of the parts handling arm) Max. machining diameter: 340 mm Max. turning length: 785 mm Njdpfx Ae Abw U Asirolh Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 connection, 80 mm bore, integrated motor Speed range: 45 - 5,000 min.-1 Power/continuous operation: 22 kW/15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 min-1 Power/continuous operation: 11 kW/7.5 kW Spindle with 140 mm connection, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub spindle travel – NC axis W, travel for W450: 595 mm Spring-loaded part ejector from the sub spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub spindle Turret Number of tool stations: 12, fixed and driven, BMT60 (not VDI) Tool shank diameter: 25 x 25 mm Tool shank outer diameter: 40 mm Driven tools Drive power: 7.1/4.1 kW Speed range: 45 – 6,000 min.-1 Feed rates Rapid traverse in X and Z axes: 25/30 m/min. Rapid traverse in C axis: 200 rpm Travel X-axis: 260 mm Z-axis: 510 mm Y-axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3330 mm – without feeder and conveyor Depth: 1800 mm Height: 2250 mm Machine weight: 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF Where N Hwxez Hk R Ue Nou 3D machining process simulation Machining time overrun control Load monitoring (spindle, feed axes) NC operation monitoring (including part count) Cycle time reduction function Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Material feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction system Machine equipment: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm): 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial tool holder - 5X Turning tool holder - 5x Boring bar holder - 2X Front steady rest, double-sided - 3X Rear steady rest - 3X Reduction sleeve (manufactured from stock material) Reduction - nylon, diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm Nljdpfx Aeyk Tbheirjh W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared

Condition: good (used), Description: The machine is in good technical condition, with the possibility of testing by prior arrangement. Maximum turning diameter: 660 mm Maximum swung diameter: 660 mm Main spindle: - Speed range: 35–5,000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub spindle: - Speed range: 35–5,000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Nsdpfx Aioy Amqzjrslh Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant - Tool magazine for 20 tools - B axis (positioned at 0.001° increments) - C and Y axes - Sub spindle angular position indexing - Synchronization of main and sub spindle - Tool presetting system (Tool Eye) - Front door locking - 20-position tool magazine - Complete cooling system - Interface for IC memory card

Condition: used, Year of construction: 2010, Mazak VTC820/30 3-Axis Machining Centre. S/No. 200131 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110, Removable Centre Partition. Country of Origin: United Kingdom Nsdpfxe Afnlao Airjlh Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please see individual lot for loading information and charges. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Chuck: Kitagawa BB208 (210mm) bar passage: 65 mm secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface Nljdpfxjk D Ez Ie Airjh New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Nlodpfsz Ipzusx Airsh Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2020, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 30m/min, Spindle power 24Kw, Njdpfx Ajzbkm Nsirslh spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, spindle probe , heidenhain tnc 640control.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ASS.NO.330165301, turning length: 1,017 mm, turning diameter: 420 mm, total height: 2,840 mm, total length: 5,500 mm, total width: 2,800 mm, overall weight: 7,400 kg, bar passage: 70 mm, number of driven tool stations in tool turret 1: 12, MAZAK SUPER QUICK TURN 300 M CNC lathe Note: Technical data is provided without guarantee. - Swing diameter: approx. 620 mm - Max. turning diameter: approx. 420 mm - Max. turning length: up to approx. 1017 mm - Bar capacity: presumably 70 mm - Diameter of the three-jaw chuck: 250 mm - Number of powered tool stations: 12 - Includes technical documentation - Includes machine accessories such as tool holders, some powered, chuck jaws, and other accessories Nledpfx Aiez Nwaporeh Transport will be carried out on a standard truck. FCA D-01445 Radebeul - loaded onto truck.

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine Nljdpfx Aoyvvlusiroh - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 511 mm, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, MAZAK QUICK TURN NEXUS 200 MS Year of manufacture: 2004 Control system: Mazatrol 640T Nexus Machine type: CNC turning machine Configuration: Main and counter spindle, C-axis, driven tools Working area: Max. swing diameter: 675 mm Max. turning diameter: 380 mm Max. turning length: 511 mm Max. bar diameter: 65 mm Main spindle: Speed range: 35 – 5,000 rpm Drive power: 26 kW Continuous power: 22 kW Max. torque: 350 Nm Spindle bore: 76 mm Spindle nose: A2-6 C-axis resolution: 0.001° Counter spindle: Speed range: 35 – 6,000 rpm Drive power: 10 kW Continuous power: 7.5 kW Max. torque: 75 Nm C-axis resolution: 0.001° Tool turret: Tool positions: 12 Nsdpsz Ipvxsfx Airolh Driven tools: available Speed of driven tools: 25 – 4,500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel distances: X-axis: 230 mm Z-axis: 575 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 33 m/min Machine data: Total connected load: approx. 46.2 kVA Machine weight: approx. 5,100 kg Dimensions L x W x H: approx. 2,800 x 1,800 x 1,850 mm

Condition: excellent (used), With C-axis, with driven tools MAZAK Mazatrol 640T control Nsdpfx Aieu R Nd Eerjlh Turning length -982 mm Swing Diameter -610 mm Turning diametre 264 mm Spindle speeds - 4'000 rpm Tool changer with 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm² Nlodpfx Aijg Dgyxereh

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, controller manufacturer: Mazatrol, controller model: SmoothX, workpiece height (max.): 320 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 3,650 mm, total width: 2,984 mm, overall weight: 6,800 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, coolant supply: 70 bar, spindle motor power: 15 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained CNC 5-axis vertical machining centre. It is a Mazak CV5-500 from fitted with the Mazatrol Smooth X control system. The machine is in a like new condition with 1114 spindlehours. Nlsdjz Ndxkepfx Airjh Technical specifications: Table dimensions: Ø 500 mm Number of pallets: 1 Max. workpiece dimensions: 500 x 320 mm Max. workpiece weight: 200 kg X-axis travel: 730 mm Y-axis travel: 450 mm Z-axis travel: 470 mm C-axis (work table rotation): 360° B-axis travel: ±110 (220) ° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 15/11 kW Number of positions in tool magazine: 48 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus 350 mm, with numerous frame saws and grinding machines. Nsdpfoz R Uvxjx Airolh

Condition: used, Year of construction: 2006, Opportunity to purchase a Mazak 3 axis vertical machining center in good working condition. Immediately available for delivery. Viewing possible upon appointment. Including a chip conveyor, cooling 15bar through the spindle, Renishaw measuring probe and tool presetter. Nlodozkwiuepfx Aireh Cnc control Mazatrol PC Fusion CNC 640 M Nexus Table Size (Clamping Surface) 550 x 1300 mm Maximum Table Load 1200 kg Number of T-Slots 5 T-Slot Spacing 100 mm Slot Width 18 mm Rapid Traverse 36000 mm/min Spindle speed Range 40 – 12,000 rpm Cutting feed Rate 1 – 8,000 mm/min Tool shank MAS BT-40 Tool positions 30 Max. tool diameter 80 mm Max. tool length 350 mm Max. tool weight 8 kg Chip conveyor yes Machine weight 7100 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazak, controller model: SmoothG, workpiece weight (max.): 1,200 kg, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, overall weight: 6,800 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 18 W, spindle nose: DIN 67871A, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We are pleased to offer this very well-maintained Mazak VCN 530C vertical machining centre with a Lehmann 500 Series 4th/5th axis, manufactured in 2017. The machine is equipped with the user-friendly Mazatrol SmoothG control system. This machine impresses with its high precision, reliability and productivity, and is ideally suited for single-part and batch production. Technical specifications: Table dimensions: 1300 x 550 mm Table load capacity: 1200 kg Number of pallets: 1 Njdpez Nd Tcefx Airolh NC rotary table: Lehmann T1-510520LL X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 – 12,000 rpm Spindle mount: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC turning machine Okuma LB 3000 EX II MYW 800 Control system: OSP-300L Year of manufacture: 2014 Nledszz Ihvspfx Aireh Internal machine number: 75 Distance between centers or spindle noses: 1085 mm Turning diameter over slide/bed: 340 / 580 mm Travel in X-axis: 260 mm Travel in Y-axis: 115 mm Travel in Z-axis: 1,010 mm Travel in C-axis: 360 mm Travel in W-axis: 895 mm Spindle bore: 72 mm Main spindle speed: 45 - 5,000 rpm Counter spindle speed: 45 - 6,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: Chip conveyor Touch probe Parts catcher Bar feeder IRCO MUK 7012 Bar length: 1250 mm Coolant system TM 24, 8 bar

Condition: like new (used), Year of construction: 2023, operating hours: 3,837 h, functionality: fully functional, machine/vehicle number: 346574, turning length: 500 mm, turning diameter: 276 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, Equipment: rotational speed infinitely variable, The machine was put into operation in February 2024 and has 2465 automatic operating hours. It is used solely for machining 95% plastics and 5% brass. The subspindle has a two-jaw chuck to accommodate milling contours. The machine can be inspected during production at any time and is in like-new condition. The investment, including accessories, was €241,000. It has a 12-station turret, all powered. For sale EXW 91413 Neustadt. Nledpfxjynnhwo Airjh

Condition: good (used), Year of construction: 1998, Vertical Machining Center Mazak VTC-20C The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it. In 2025, the spindle of the MAZAK VTC-20C was overhauled. Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask. Specification | Value ---|--- Nlodpevurd Eefx Airsh X-axis travel | 1,660 mm Y-axis travel | 510 mm Z-axis travel | 510 mm Distance from table surface to spindle nose | 180–690 mm Distance from column front to spindle centerline | 550 mm Working table area | 2,000 × 510 mm Maximum table load (uniform load) | 1,000 kg Spindle speed | 40–7,000 rpm Spindle motor power – 10 min rating | 11 kW Spindle motor power – 30 min rating | 7.5 kW Spindle motor power – continuous | 5.5 kW Spindle taper | 7/24 taper No. 40 X-axis rapid traverse | 24,000 mm/min Y-axis rapid traverse | 24,000 mm/min Z-axis rapid traverse | 20,000 mm/min X-axis cutting feed rate | 1–5,000 mm/min Y-axis cutting feed rate | 1–5,000 mm/min Z-axis cutting feed rate | 1–5,000 mm/min Tool magazine capacity | 24 tools Tool selection system | Tool holder No. fixed-address system (automatic short-cut system) Tool shank | NT-40 Pull stud bolt | Yamazaki-made ANSI type Maximum permissible tool diameter | Ø80 mm Maximum tool diameter with adjacent pocket empty | Ø110 mm Maximum permissible tool length | 350 mm (from gauge line) Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt) Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools) Machine weight | 7,215 kg Machine height from floor | 2,701 mm Required floor area | 4,000 × 2,990 mm

Condition: good (used), Year of construction: 2007, operating hours: 18,000 h, Mazak QTN 250MSY Year 2005 Steering unit: Fusion 640 Maximum swing 640 mm Machine diameter / standard machinable diameter 380 mm Maximum workable length 525 mm Bar capacity 77 mm Main spindle dimension 250 Subspindle dimension 250 Spindle speed 4000 Spindle nose ASA 8 Spindle hole 88 VDI turret type Number of tools 12 Nlsdpfxoiqgfbo Airoh Spindle speed 5000 rpm Main spindle motor (continuous / 40% ed) 26 KW 300L cooling tank Carpet chip conveyor

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,917 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis Mazak VCN-530C was manufactured in 2017. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine includes a robust worktable size of 1,300 x 550 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-530C vertical machining centre we have for sale. Contact us for further details. • Operating counter (cutting only): 11,917 h • Axis travels (standard VCN 530C): • Distance table surface to spindle nose: 150–660 mm • Distance column to spindle centre: 586 mm • Work envelope / capacities: • Max workpiece length: 1,300 mm • Max workpiece width: 550 mm • Max workpiece height: 570 mm • Max workpiece weight: 1,200 kg • Worktable: • Table size: 1,300 × 550 mm • T-slots: 5; width 18 mm; pitch 100 mm • Note: Table-load rating does not represent rotary table load capacity • Spindle: • Motor power: 18.5 / 11 / 7.5 kW (duty dependent) • Tooling / ATC: • Max tool length: 350 mm • Max tool diameter: 80 mm (125 mm with adjacent pockets empty) • Tool-to-tool change: 1.3 s • Feed rates: • Rapid X/Y/Z: 42 m/min • Cutting feed: 1–42,000 mm/min • Utilities / dimensions: • Coolant tank capacity: 250 L • Floor space (approx.): 2,880 × 3,102 mm • Machine height (approx.): 2,807 mm • Included machine features (PD081 production package): • Workpiece air blast • High-pressure through-spindle coolant • Coolant flushing of machine covers • Synchronous tapping • CNC memory: 8 MB maximum program size • G00 Slope Constant rapid-movement optimisation Additional equipment Nlsdpfjz Itghex Airsh • Fourth axis: • Tsudakoma NC rotary table, model RNE-200L (Japan), with 250 mm faceplate • Fourth-axis preparation on machine • Chip management: • Left-side Crowther hinged-belt chip conveyor • Preparation for a left-side chip conveyor • Probing: • Renishaw OMP60 workpiece probe • Preparation for OMP60 on machine • Extraction: • Filtermist FX6002 oil mist extraction unit • Other: • Workholding system • Pneumatically powered coolant wash gun Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Njdpfx Aisyz Stlsrslh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!