Die-cutting machine

Edel HM 35/350 BKE 200/5 HM 35/350 BKE 200/5

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. Njdpofzktzefx Ag Nsku with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Nksdpfx Aov N I Hlsg Nju Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: ready for operation (used), Pressing force: 300 kN/30 t Tool height: 200 mm Stroke length: 0 – 300 mm Bending capacity with prism tool MW 125/240: 200 x 16 / 200 x 24 mm Nkodpfjx Apgcox Ag Nsu Bending speed: 0 – 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Space requirement: 1250 x 820 x 1120 mm

Condition: good (used), Year of construction: 2000, machine/vehicle number: 1101188, GDW LZ 250 lead and feed screw lathe Year of manufacture: 2000 Centre height: 125 mm Centre distance: 500 mm Spindle bore: 38 mm Spindle mount: DIN 55027/4 Tailstock taper: MK 3 Speed range: 60 - 3,000 rpm, stepless Nedpfsx Slhdjx Ag Neku Weight: approx. 600 kg Dimensions: approx. 1,300 x 700 x 1,400 mm With collet chuck mechanism With Iskra digital readout

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm Nsdpfx Aohhc Ixog Nsku - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo type/model: MS 75 x 2000 S Condition: new belt dimensions: 75 x 2000 mm belt speed: 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm suction connection: 100 mm motor output power S1 100%: 3,0 kW motor input power S6 40%: 4,0 kW Voltage: 400 V length: 1080 mm width: 440 mm height: 1000 mm Weight approx.: 66 kg Nsdpfx Agofnr Aio Nsku Features: Good grinding performance due to high belt speed Quick adjustment for horizontal and inclined position Continuous plane grinding surface for optimum grinding of long workpieces Constant belt tension due to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for cylindrical sanding Including quick tensioning system for fast belt change Easy adjustment of parallel belt run by means of adjusting screw Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Base frame

Condition: good (used), Year of construction: 2007, approx. 67 million impressions, EasyPlate, Alcolor, Technotrans dampening solution circulation and cooling, CPC control with integrated register, ink unit washing device, SuperBlue, pull mark control, ultrasonic double sheet control, sheet decurler, powder device Alphatronic 200, antistatic device Compact Nksdpjx R S Tdjfx Ag Neu

Condition: excellent (used), Year of construction: 1980, WAFIOS DF5 Wire range- 1,5- 5,0 mm Mesh with - 20 - 100 mm Working with - max.2000mm Nodpfjv Uw Ddex Ag Njku Capacity - 170 m2 / hour Tooling for the mesh width - 60 mm

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nkedpfx Aoh Axd Neg Neu Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unllog 4000 Closing 60 TO Nedpfx Agog Emvhe Nsku Year 1997 Scrow 30 mm Injection weight approx. 90 g