Used Merlo P65.14 Hm for sale (1,727)

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Pgjdpfx Adeuycgfeksp Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) Pgodpfx Aeyv S Ufsdkep 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, power: 103 kW (140.04 HP), fuel type: diesel, color: green, tire size: 17,5-25, Year of construction: 2010, operating hours: 11,738 h, machine/vehicle number: 384, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, Deutz engine Quick change device Psdpfeqt Dwfsx Adksgp Total weight 11,000 kg max. load capacity 5,500 kg Max. lifting height 8,600 mm max. outreach 4,600 mm Errors excepted

Year of construction: 2000, condition: used, Punching machine Psdpeg Dgyxofx Adkegp Premium quality HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1,907 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,700 kg, total length: 4,310 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Front tires size: 400/70-20 Pgsdpfx Asy Scnnjdkop Rear tires size: 400/70-20

Condition: ready for operation (used), functionality: limited functionality, power: 103 kW (140.04 HP), lifting power: 4,000 kg/m, lifting height: 7,000 mm, Year of construction: 2012, operating hours: 3,380 h, Equipment: all wheel drive, cabin, onboard computer, standard shovel, Telehandler MERLO P40.7 Turbofarmer Year of manufacture: 2012 According to hour meter: 3,380 hours 4-ton lifting capacity 7-meter lift height 103 kW - Original paint Pgsdpfxjyg A Tlj Adkep - New tires - Including bucket Sales price: €25,900 net Affordable delivery available.

Condition: excellent (used), HM window machine 3 x right 4x left top grinding top bottom Psdpfot Hk Atjx Adkegp

Condition: excellent (used), power: 55 kW (74.78 HP), color: other, lifting height: 13,000 mm, mast type: telescopic, Year of construction: 2016, operating hours: 2,484 h, General information Year of manufacture: 2016 Technical information Engine type: Deutz TD 2.9 L4 Empty weight: 8.650 kg Dimensions (LxBxH): 540 x 222 x 240 cm Functional Lifting capacity: 3.800 kg Maximum reach: 860 cm Quick coupler system: Yes CE mark: yes Psdpfx Adjy Rfwceksgp Condition Technical condition: very good Visual appearance: very good Damages: none = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Pallet forks - Support legs - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage IIIB / Tier IV interim pallet forks, hydraulic quick coupler, CE certificate

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler was serviced three months ago. During this maintenance, among other tasks, the slew ring bolts were replaced, and both machine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Lifting capacity at max. height: 1,500 kg Lifting capacity at max. outreach: 150 kg Slewing turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine power: 107 kW / 145 HP Fuel tank: 150 l Performance Speed 1st gear: 16 km/h Speed 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrics System voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent four-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock carriage Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent four-wheel drive Four-wheel steering Disc brakes on all wheels Pgsdpfx Aoxr Axdsdkop Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Note: The winch (€4,000) and the platform (€1,000) can be purchased separately if required.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous Pgjdpjx Dmgvsfx Adkop MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 Podpfx Aoprfbusdkjgp column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch Podpskahu Refx Adkogp - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm Pgjdpfx Adekahu Usksp weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, sheet width 2035 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . Pgsdpfjxaaahjx Adkop - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: new, width of the strips 75.0 mm Podexaaq Tspfx Adkjgp band length 2000 mm band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction

Condition: new, sheet width 2540 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 6275 kg dimensions of the machine ca. 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy Pjdpfx Adexaaz Sjkogp with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C9000052, Year of construction: 2019, operating hours: 1,483 h, lifting height: 12,000 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, documentation/manual, The current UVV inspection report is attached! UVV valid until 10/2026! Maintenance and service have always been carried out at the manufacturer's specified intervals! TECHNICAL DETAILS Load capacity: 3.8 t Lift height: 12,000 mm Fork length: 1,200 mm MACHINE DETAILS Drive: Diesel Tyre condition Front right tyre condition: approx. 80% Front left tyre condition: approx. 80% Rear right tyre condition: approx. 80% Pgedpfx Ajywu Tgedksp Rear left tyre condition: approx. 80% Operating hours: 1,483 h EQUIPMENT UVV inspection valid until 10/2026 Fork carriage Seat cover Spare key Documents

Condition: excellent (used), Year of construction: 2014, You are bidding on: a branded machine - folding press - from a highly reputable and well-known manufacturer - HM. Device features: - HM folding press - Rail bends cleanly – test possible on site - Angle display - Bending length: 1270 mm - Sheet thickness: up to 3 mm (steel sheet, aluminum, zinc, etc.) - 4-segment rail, see pictures (extension rail also segmented) - Foot-operated closer - Partially electric: bends electrically, opening and closing mechanically by foot - Additional: previous owner installed a light with bracket and rear sheet tray (both removable) - Professionally welded, mobile machine frame - Original price over €13,000 Pjdpfxex Hixpo Adkjgp Shear HT 100 and other models available optionally. Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steelworking, including folding presses, guillotine shears, drills, slip rollers, slitting and profiling machines, accessory parts (beading units, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. I am always available to answer any questions. You will receive an invoice with stated VAT. Free loading possible – weight approx. 600 kg. Inspection and test runs are possible and encouraged by prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should take place within 10 days following the end of the auction. Location: 97261 Article number: Folding Press HM 251202.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 49076268499286, Year of construction: 2019, operating hours: 2,793 h, load capacity: 4,000 kg, lifting height: 16,000 mm, fork width: 2,600 mm, overall weight: 10,000 kg, total length: 5,000 mm, TECHNICAL DETAILS Load Capacity and Lift Load capacity: 4,000 kg Lifting height: 16,000 mm Maximum height at maximum load capacity: 8.1 m Outreach at maximum load capacity: 4.2 m Load capacity at maximum height: 2,500 kg Load capacity at maximum outreach: 250 kg Pgsdpfxjw Hdxwo Adkep Power at 2,400 rpm (97/68/CE): 74.9 kW / 102 HP MACHINE DETAILS Dimensions & Weight Outer fork width: 2,600 mm Chassis length: 5,000 mm Total weight: 10,000 kg Operating hours: 2,793 h

Condition: excellent (used), Year of construction: 1999, control type: NC control, controller manufacturer: UNIOP, working width: 2,520 mm, HM bending machine Pedpfsyx Epbex Adksgp Model KSM 5 / 2500 Year : 1999 Capacity : 2520 x 5 mm. INIOP NC control (Swiss made) Manual back gauge

Condition: used, Year of construction: 2016, Lifting capacity 5500kg/8.60mtr. 500/70R24 30% 176l/min Hydraulics Air conditioning tinted / windows / Pgjdpfx Ador Ii T Toksp

Condition: new, Year of construction: 2021, Pick and place robot Model: KUKA 3 D1200 HM/SEL Pgsdpfx Ajt Ah Ewjdkep Year of production: 2021 Payload: 3 kg Reach: 1200 mm Control: KR C5 KSP Price for single robot: 1̶5̶.̶3̶0̶0 / 9,600€/pc. Price for robot in cell: 11,700€/pc.

Condition: excellent (used), Year of construction: 2007, Battenfeld HM 300/2250S with robot Wittmann W818 / machine in very good technical condition / operating hours: approx. 40.000 h in automatic mode year of construction: 2007 injection unit: screw diameter: 55 mm injection weight: 702.5 g Injection pressure: 2500 bar Metering volume: 772 ccm Clamping unit: Clamping force: 300 t tie bar distance: 710x630 mm size of clamping platens: 1030x1020 mm ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear resistant and resistant to corrosion Proportional valve on the injection unit - precise injection In the machine is installed new original screw and cylinder Pgjdpfx Adszc Ntqekop Robot Wittmann W818 4-axis, high-speed robot: 3 axes are driven by servo motors (electric); movement A and C Touch control panel Robot with adapter, protective housing Dimensions: Weight: 13000 kg Length/width/height: 6.90x1.90x2.40 m Drive: Pumps/motor: 45 kW Heating power: 22,7 kW Total power: 67,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Battenfeld HM 100/525 with Battenfeld R10S Robot / Operating Hours: approx. 19,000 in automatic mode Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2,100 bar Dosage volume: 251 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x420 mm Platen size: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Pedpfxjzc Nu Uo Adkogp Control system: UNILOG B6 - touchscreen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total operating hours: 26,580 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Battenfeld R10S Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servomotors (electric); axis B - pneumatic, axis C Robot with adapter Purchase of robot at extra cost Dimensions: Weight: 4,600 kg Length/Width/Height: 4.23x1.41x2.05 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Pgsdpjzc Ntwjfx Adkjp Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Dosing volume: 491 ccm Dimensions Weight: 15000 kg Length/width/height: 6.90x1.78x2.34 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request