Used Nordmeccanica Coating System for sale (39,644)

Condition: good (used), Year of construction: 2020, functionality: limited functionality, machine/vehicle number: ADL 2200/6, total height: 2,200 mm, Insulated glass production line and refrigerator with pumps for water purification a) ADL 2200/6 insulated glass production line b) BM7 butilex applicator, 7 kg c) TMPB 200 two-component extruder Iijdpfx Akjzgu Rhs Ajf d) F-200 refrigerator e) PKM strip cutting machine f) SM 25 strip filling machine g) R.T.M. rotary table h) Water purifier

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. Iedswzl Hxopfx Ak Asif • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Iisdjyvv Trspfx Ak Aof Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: new, Year of construction: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion coating), intermediate drying, an electrostatic coating zone (booth/powder coating station), and a curing oven. The workpieces are transported through the system by a conveyor system. Our company, ROMER®, plans, manufactures, and assembles complete powder coating lines. Our systems can be inspected and tested at our facility in Hürth near Cologne. Iijdpfx Ascv Nl Rek Asf Request a quote for a system tailored to your specific application.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 2,700 mm, total width: 2,490 mm, Hercules is a revolutionary, portable system for flame spraying coatings onto metal substrates, drip trays, containers, steel structures, concrete floors, and other surfaces. It represents the most efficient technology for corrosion protection through the application of a thermoplastic, environmentally friendly coating directly on site. Ijdpfxozarzls Ak Ajif

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. Iijdpfx Ajwzmcbok Aef DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Iisdpfxswf Dpge Ak Asf Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, STR-SMART Multicolor Powder Coating Gun Set | Touch Control | Wi-Fi | New ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized shipping quote. ✅ Brand new, unused professional industrial product ✅ 2-year warranty ⏱️ Delivery time: approx. 15 days after receipt of payment Please additionally inquire about current stock availability. ➖➖➖➖➖ ⭐ STR-SMART Multicolor Powder Coating Gun Set ⚡️⚡️⚡️ATEX-certified.⚡️⚡️⚡️ SMART TECHNOLOGY – WITH PROTON SERVICE! The STR-SMART Multicolor Powder Coating Gun Set is a state-of-the-art solution for professional powder coating tasks, offering high efficiency, user-friendly operation, and flexible use with a variety of powder colors. With touch controls, Industry 4.0 features, Wi-Fi connectivity, and remote access, the unit offers optimal convenience in daily use. Up to 100 different operating parameters can be stored—ideal for recurring coating jobs and streamlined workflows. The lightweight, ergonomic gun ensures comfortable handling. With various nozzle types, the set can be adapted to diverse coating styles. ☘️ Powerful ☘️ Cost-Effective ☘️ Environmentally Friendly ✅ Multicolor capability for flexible color applications ✅ Touch operation, 7" TFT touchscreen ✅ 100 storable operating parameters ✅ Wi-Fi connectivity and remote access Iijdpfx Astpxpfsk Asf ✅ Digital operating manual in 4 languages ✅ Ergonomic, lightweight gun ✅ Nozzle types for different coating styles ✅ Professional solution for manual powder coating ➖➖➖➖➖ Technical Specifications: ✔️ SMART electro-pneumatic control panel ✔️ Input voltage: 110–240 V AC ✔️ Power consumption: 25 W ✔️ 7" TFT touchscreen ✔️ Corona system ✔️ Corona current limit: 0–120 μA ✔️ Air pressure: max. 6–8 bar ✔️ Air consumption: 116 l/min ✔️ Maximum powder coating output: 450 g/min ✔️ Powder feed rate: 0–27 kg/h ✔️ Gun weight: approx. 460 g ✔️ Powder coating hose: 6 m ✔️ Power cable length: 6 m ✔️ Electrical protection class: IP54 ✔️ European Standard: EN 50050:2 ➖➖➖➖➖ This set is ideally suited for companies seeking a modern, digital, and efficient solution for manual powder coating tasks. The storable parameters facilitate repeatable results, making it perfect for professional workshops and industrial applications. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models so you can plan your investment flexibly. Contact us for information on leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from superior service and quality! ✨ Our machines are built to order and supplied as new, unused units with a 2-year warranty. Special dimensions or customized versions are available on request. We are happy to help design the right solution for your workshop. Request your quote now—prepare your business for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Iijdpfx Akoy Tlc Ds Ajf Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 02_01_08, Eurotech Way Automatic Glass Edge Coating Machine Professional automatic machine for glazing and lacquering the edges of glass sheets. Suitable for glass panes with thickness of 4–19 mm and allows precise application of enamel/glaze on edges of 10–200 mm width. Equipped with dosing and application roller system, automatic parameter setting, roller conveyor system, and recipe memory for settings. Perfect for batch production in the glass industry—ensures uniform, aesthetic, and repeatable edge finishing. The machine fully automates the process and significantly increases productivity. Low usage – only 25,206 cycles performed in total. Dimensions: 5864 x 2695 mm Power supply: 400V - 50 Hz Required power: 4 kW Weight: 4000 kg Iiedpfx Ajxzfu Tjk Aef Interface in 3 languages: English, Italian, Polish Operational machine, possible to test before collection. Ready for pick-up. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Ijdpewhbnljfx Ak Ajif

Condition: like new (used), For industrial use, tumbler loading systems are commonly utilized across various industries such as the food industry (especially bakery and meat processing), pharmaceutical industry, chemical industry, and others where precise mixing, rotation, or material processing is required. These machines offer high capacity, accuracy, and safety within automated production lines. High Capacity Adjustability Automatic Loading and Unloading Systems Temperature and Humidity Control Drive System Materials and Construction Safety Systems Integration with Automated Systems Adaptability and Flexibility Energy Efficiency Isdpfx Akjzbk R Io Aeif

Year of construction: 2023, condition: ready for operation (used), A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible. Iodpjyrta Hjfx Ak Ajif

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Key Features: Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) Iisdpfxjzi N Dhj Ak Aof The system is in good working condition and can be inspected while operational by appointment. Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 500 kg, temperature: 250 °C, heating capacity: 105 kW (142.76 HP), air demand: 7,000 m³/h, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, Equipment: lighting, Compact powder coating system (complete system) – booth, curing oven, conveying system & Gema technology Complete system for manual powder coating of parts up to 3,000 mm in length and 500 kg payload per carrier. First-class brand-name components (Gema, Siemens, Schneider Electric, Donaldson, Riello), including installation, commissioning and operator training. Overview & Concept For sale is a brand-new, manual powder coating complete system for workpieces up to 3.0 m in length. The system combines an efficient extraction coating booth, a powerful gas curing oven, and a flexible rail conveying system including steel structure (individual design/planning of a powder coating system possible upon request!). 1. Powder coating booth (double-sided manual coating) - External dimensions (L x W x H): 3,400 x 1,100 x 2,150 [mm] - Workpiece opening dimensions: 500 x 1,600 [mm] - Extraction & filter: 2x radial fans at 4,500 m³/h (ATEX version, 3 kW each); 2 filter units with a total of 6 antistatic Teflon filters (Donaldson, 325 x 660 [mm]) - Cleaning: Automatic/manual compressed air pulse cleaning (6 valves) - Safety/equipment: ATEX-compliant internal lighting, sound insulation in the fan area, control via Siemens/Schneider wall control cabinet Electrostatic powder coating technology (Gema) (other manufacturers can also be supplied upon request) - 2x hand guns: Gema OptiSelect Pro with PowerBoost® technology, ATEX-certified - 2x control units: Gema OptiStar 4.0 CG20 with DVC and PCC precision current control, 250 memory programs, app connectivity - 2x injectors: Gema OptiFlow IG07 with quick-release & non-stick cartridge Convection curing oven (chamber oven with double door) - Internal dimensions (L x W x H): 3,500 x 2,000 x 2,300 [mm] - Max. temperature / operating temperature: up to 250°C / 180 - 200°C - Heating: Indirect thermo block with Riello/Ecoflam burner (approx. 105 kW (90,000 kcal/h)) - Fuel: Natural gas or liquefied gas (LPG) (other energy supply e.g. electricity possible upon request) - Recirculation: 2 x 3,500 m³/h recirculation fans (plus automatic fan exhaust fan) - Insulation: 150mm rock wool insulation Manual conveying system including steel structure Load capacity: Max. 500 kg per carrier Iodpozu Imrsfx Ak Ajif Equipment: 5 oven rails, 15 carriers (3m each), 3 transverse transfer trolleys Running trolleys: Equipped with high-temperature resistant bearings Scope of supply & services / Commercial points Included in the price: - Booth with extraction & filter unit - 2x Gema powder coating units - Curing oven including thermo block & burner - Conveying system including steel structure & trolleys - Installation, commissioning & operator training on site

Condition: ready for operation (used), functionality: fully functional, tank capacity: 73 l, usable tank capacity: 50 l, total length: 1,200 mm, total width: 1,500 mm, total height: 2,000 mm, Process system for the production of creams, ointments, and suppository masses Design for foaming products The heated container is vacuum-resistant up to -1 bar and pressure-resistant up to 2.4 bar. TECHNICAL DETAILS Temperature range, container interior, max.: 95°C Jacket temperature, max.: 140°C Usable volume: 50 L Total volume: 73 L Minimum filling volume: 10 L Homogenizer Model: Brienz RF 112 M-2 Power: 4 kW Speed: max. 2,850 rpm Mixer/Scraper Iiedpezrfbbjfx Ak Asf Gearbox: SEW FAF 37 Speed: max. 28 rpm MACHINE DETAILS Space requirement: 1,200 × 1,500 × 2,000 mm

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Iiedpjy N Duqefx Ak Aef Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Iodpfx Akszkucfe Aoif Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) Iodpfsyc S Htox Ak Asif The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 111302, functionality: fully functional, temperature: -75 °C, total length: 1,300 mm, total width: 1,300 mm, total height: 2,000 mm, usable tank capacity: 100 l, The system was professionally dismantled and decommissioned by the manufacturer. The plates were stacked together. TECHNICAL DETAILS Ice condenser volume: 100 l Ice condenser capacity: 12 kg Ice condenser output: 8 g/24 h Ice condenser temperature: −75 °C MACHINE DETAILS Platform dimensions: 350 × 450 mm Platform area: 0.48 m² Platform spacing: 111 mm Refrigerant: Isceon 89 Heat transfer fluid: Syltherm HF Electrical equipment: 400 Volt, 3 phases, 50 Hz Dimensions & Weight Space requirement for freeze-drying system: 1,300 × 1,300 × 2,000 mm Space requirement for additional component: 1,800 × 600 × 2,000 mm Weight: approx. 1,500 kg Iisdpfx Ajzrfa Dok Aef

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, total length: 7,000 mm, total height: 3,000 mm, total width: 2,600 mm, warranty duration: 12 months, 🟦 Semi-automatic Powder Coating Plant – Compact Container System Modern semi-automatic powder coating line built in a container-type enclosure, consisting of a powder coating booth, curing oven, and automatic transport system. This unit is a compact and mobile solution designed for coating small metal parts — ready for operation anywhere after connecting to power supply. Ideal for production companies, workshops, or service providers looking for an efficient and flexible coating system. 🔹 Technical Specifications CURING OVEN - Working chamber dimensions: 4000 x 700 x 1300 mm (L x W x H) - Heating power: 24 kW - Motor: 2.5 kW, 1500 rpm - Radial fan capacity: 4500 m³/h - Thermal insulation: 150 mm - Maximum temperature: 250°C POWDER COATING BOOTH - Working chamber dimensions: 2000 x 600 x 1400 mm (L x W x H) - Filtration unit: * Motor: 2.2 kW, radial fan 12,500 m³/h * Two conical polyester filters L600 * Twist-type filter mounts * Pneumatic powder cleaning system with adjustable cyclic discharge AUTOMATIC TRANSPORT SYSTEM - Travel length: 11,500 mm - Hanger spacing: 250 mm - Number of hangers: 45 pcs - Maximum speed: 4 m/min - Motor power: 0.75 kW 🔸 Features and Advantages * Compact container design – easy to transport and quick to install Iiedsxlr Emepfx Ak Aef * Low energy consumption and small footprint * Continuous process ensured by automatic conveyor system * High-efficiency filtration system * Fully equipped “plug & play” unit – ready to start immediately

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Iiedpfx Aeyzc Rujk Asf

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter Iijdpfx Akoxcvzae Asf (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 300120-03-DE, total length: 4,170 mm, total height: 2,318 mm, total width: 2,374 mm, power: 54 kW (73.42 HP), inner dimension length: 3,200 mm, inner dimension width: 2,000 mm, inner dimension height: 1,920 mm, energy consumption: 54 kWh, Powder coating system with the following components: - Oven Iiodpfxjw Tcpaj Ak Ajf - Extraction - Wagner gun - Paints

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m - Flexible gantry design, allowing spray width to be easily and precisely adjusted - Siemens Simatic touch panel Isdpfxoyl Rr Hs Ak Aeif - Commissioning / installation support can be provided - Documentation available System is dismantled and ready for transport.