Used Optical Fibers for sale (3,726)

Condition: good (used), mileage: 5,10,319 km, power: 552 kW (750.51 HP), first registration: 08/2018, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 5,970 mm, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, number of seats: 2, total length: 8,540 mm, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed Tsdpfx Ajzlpdmjf Ajc - Hydraulic system - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Blind spot sensor - Xenon lamp - Auxiliary braking system Number of axles: 3, Configuration: 6x4, Payload: 13865 kg, Unladen weight: 14135 kg, Gross vehicle weight: 28000 kg, Total tank capacity: 610 liters, Trailer coupling, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 24000 kg, Axle pin diameter: 50 DIN, Fifth wheel coupling: Fixed, Number of differentials: 2, Winch pulling force: 12 tons, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Black, Heated mirrors, Lighting type: Xenon lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 552 kW (740 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, System length: 545 cm, Pump, Hooklift height: 145, Central locking, Seats: 2, Seat arrangement: 1+1, Seat upholstery: Leather, Seat adjustment: Manual, 6X4 LIFTING BOOGIE // RETARDER // FH16.750 // LEATHER // XENON // FULL AIR // 510TKM Transmission Gearbox: VOL, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22,5; Steered; Tire tread depth left: 5 mm; Tire tread depth right: 12 mm Axle 2: Tire size: 315/80R22,5; Twin tires; Tire tread depth left inside: 7 mm; Tire tread depth left outside: 8 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 9 mm Axle 3: Tire size: 315/80R22,5; Twin tires; Lift axle; Tire tread depth left inside: 6 mm; Tire tread depth left outside: 8 mm; Tire tread depth right inside: 17 mm; Tire tread depth right outside: 16 mm Weights Unladen weight: 14,135 kg Payload: 13,865 kg GVW: 28,000 kg Functional Loading platform height: 136 cm Pump: Yes Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 1,074 € per month (default, 72 months); Ask for more information and conditions Identification License plate: BD-240-X Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of construction and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable...

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press Tjdpfx Afeygkinj Aoc - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel Tedpex D Drcjfx Af Aoc • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)

Condition: excellent (used), Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-Theta lens, high-speed scanner The system has been upgraded to Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Tjdpozh Dn Eofx Af Asc Weight approx. 1,130 kg For further technical information, please refer to the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: new, functionality: fully functional, power: 2.7 kW (3.67 HP), fuel type: gasoline, color: blue, operation weight: 62 kg, Year of construction: 2026, Equipment: UVV, Weber SRV 590-II Rammer – NEW | 700 blows/min | 62 kg operating weight | 280 mm shoe width | Honda GXR 120 petrol engine with 2.7 kW Item number: WEB170160 Technical Data: Manufacturer: Weber MT Model: SRV 590-II Condition: NEW Operating weight: 62 kg Blows per minute: 700 min⁻¹ Shoe width: 200 mm or 280 mm Engine: Honda GXR 120 petrol engine Engine output: max. 2.7 kW Fuel: Petrol Starting system: Recoil start Tjdpfxszh Dy Ij Af Aoc Features & Equipment: - Proven rammer for professional compaction applications - Reliable Honda GXR 120 engine – powerful & durable - 200 mm or 280 mm shoe width – ideal for trenches & confined job sites - High impact rate for efficient compaction - Compact & robust design – optimal for construction site use - Quality by Weber MT – immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & gardening ✓ Compaction in trenches & narrow areas ✓ Municipal operations & construction companies ✓ Fiber optic & network installation Location: Warehouse D 46514 Schermbeck (NRW) – Inspection & collection possible Delivery across Germany & internationally on request Pricing ex works Maassenstraße 91, D 46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further models available! SRV 620, SRV 660, etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Weber Rammer | SRV 590-II NEW | Petrol Rammer | Honda GXR 120 | 280 mm shoe width | Weber MT Compaction Technology Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! On request, we are happy to offer you a virtual machine inspection via video call.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 160 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW | 25 kN centrifugal force | 400 mm working width | Hatz diesel engine 1B20 with 3.1 kW Item number: 5000610035 Technical specifications: Manufacturer: Wacker Neuson Model: DPU 2540 H Condition: NEW Operating weight: 160 kg Frequency: 90 Hz Centrifugal force: 25 kN Tjdpfszh D Ncox Af Aoc Working width: 400 mm Engine: Hatz 1B20 diesel engine Engine output: 3.1 kW Fuel: Diesel Start system: Recoil starter Compaction class: Medium-duty Area performance: approx. 624 m²/h Highlights & Equipment: - Compact diesel vibratory plate, suitable for a wide variety of applications - Robust construction – ideal for daily use on construction sites - 400 mm working width – for precise compaction even in tight spaces - Ergonomic guide bar – low vibration & comfortable operation - Reliable Hatz diesel engine – powerful & fuel-efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-size surfaces ✓ Landscaping and gardening ✓ Municipal projects & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized construction sites Options: Surcharge only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as run hours, service intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information is provided without guarantee. Subject to errors and prior sale. Prices excluding VAT Further models and sizes available! Also in stock: DPU 2550, DPU 3050, DPU 3750 etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2540 H NEW | Diesel Compactor 25 kN | Vibratory Plate 400 mm working width | Hatz engine | Wacker Neuson Compaction Technology | Plate Compactor for Paving Applications Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! Virtual viewing of the machine via video call available on request.

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 181 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3050 H Vibratory Plate NEW Wacker Neuson DPU 3050 H Vibratory Plate – NEW | 30 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item Number: 5000610039 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 3050 H Condition: NEW Operating Weight: 181 kg Frequency: 90 Hz Centrifugal Force: 30 kN Working Width: 500 mm Engine: Hatz 1B30 Diesel Engine Engine Power: 4.2 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium-Heavy Compaction Surface Performance: approx. 624 m²/h Highlights & Features: - Powerful diesel vibratory plate for demanding compaction work - Robust construction – ideal for daily jobsite use - 500 mm working width – high surfacing performance in a compact design - Ergonomic guide handle – low vibration & comfortable - Reliable Hatz diesel engine – high performance & efficient - Made by Wacker Neuson – proven quality & immediately available Fields of Application: ✓ Paving and medium-sized areas ✓ Landscaping & gardening ✓ Municipal applications & construction companies ✓ Fiber optic & cable installation ✓ Compaction jobs on small to medium-sized sites Options: Surcharges only available in conjunction with the machine: Todpfxjzh Eb Ts Af Ajc - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system to record operating data such as operating hours, maintenance intervals, and emissions. The data is transmitted wirelessly to the Wacker Neuson app, where it is clearly displayed. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery Germany-wide & internationally on request Prices ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All details subject to change. Errors and interim sale reserved. Prices excluding VAT Further models and sizes available! Also DPU 3750 etc. in stock ➡️ New & used machines, accessories & spare parts Buy a Wacker Neuson vibratory plate | DPU 3050 H NEW | Diesel Vibratory Plate 30 kN | Vibratory Compactor 500 mm Working Width | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Your reliable partner for compaction equipment & construction machinery: Claudio Macagnino Construction Equipment & Commercial Vehicle Trading Ltd. ➡️ Enquire now & secure immediately available new equipment! Virtual machine inspections via video call available on request.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Tedpfxor Eqbyj Af Aoc Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Tjdpfx Afjvn D I Ns Ajc Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: good (used), PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1408 -Number: 7 pieces available -Price per piece Todshr Su Dopfx Af Ajc -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Tsdpshwv N Hofx Af Asc Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) Tedpfx Afoph U Ano Aoc - digital modulation up to 20 kHz

Condition: good (used), Year of construction: 2019, Reflective light barrier, reflective light sensor, reflective sensor, light sensor, fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, contrast sensor, contrast sensor, sensor reflective light sensor, light sensor Todpfex Thd Rex Af Aoc -Manufacturer: Sick, Array sensor contrast switch -Type: AS30-EBM314I110ZZZ -Voltage: DC 18...30V -Number: 3 sensors available -Price: per piece -Dimensions: 80/50/30 mm / 65/30/60 mm -Weight: 0.2 kg/pc.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FTB-4PRO-S1-128G, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, type plate available, Features of the FTB-4 Pro: * Quad-core processor * 4 GB RAM * Windows 10 * Color touchscreen display * 1280 x 800 TFT * Diagonal: 256 mm (10.1 inches) * Internal memory: 128 GB (flash) * Rechargeable Li-ion batteries (optional) * Interfaces: o 1x RJ45 LAN 10/100/1000 Mbit/s o 2x USB 2.0 ports Tedpfsydv Idjx Af Aoc o 1x USB 3.0 port o 1x display port o 1x headphone/microphone jack * Dimensions (H x W x D): 199 mm x 333 mm x 170 mm * Weight (without batteries and modules): 4.6 kg * X-720C-Q1-QUAD-EI-EA – TK-y SM/MM OTDR module * EUI-95 * FTBX-882260-10G 10M to 100G Multi-Service Power Blazer test module * GIGE-Bundle – Option 100 Optical + GigE option * 10GIGE – enables the 10GigE LAN/WAN interface * OTN option pack * OTDR + intelligent Optical Link Mapper base software * iOLM Pro * FP435B-V2-APC – Wireless Analysis Digital Video Inspection Probe, MF Ready * FIPT-400-MF Automated Multi-Fiber Tip UPC for MPO * FID-31 R Fiber Identifier * Including transport case

Condition: new, functionality: fully functional, overall weight: 105 kg, Year of construction: 2025, What is controlled jacking? Controlled jacking is a trenchless technology that allows underground installations—such as water pipes, sewage pipes, power cables, electrical cables, telecommunications cables, fiber optic cables, water pipes, and sewage pipes—to be laid without the need for extensive excavation. The jacking machine is hydraulically driven and equipped with a pilot head that can be used to correct the path of the jacking. Thanks to measuring systems, the operator controls the depth and direction of the jacking, which allows for high precision, even with passages several dozen meters long, in situations where accuracy and precise avoidance of obstacles in the terrain are important in order not to damage the existing infrastructure and to safely bypass it. This solution is particularly valued in places where earthworks are difficult or impossible, e.g., under roads, lawns, tram tracks, parking lots, sidewalks, or urban areas. Why use controlled pipe jacking? Controlled pipe jacking is an alternative to traditional excavation, eliminating the need to dig up the surface. This method significantly reduces the time needed to complete the project, lowers the cost of restoring the site to its original condition, and minimizes the impact on traffic and the environment. The most important advantages of controlled pipe jacking technology: - no need to interfere with above-ground infrastructure, - the ability to work under obstacles (e.g., roads, sidewalks, lawns, property entrances, railroad tracks), - reduction of noise, - vibrations, and environmental pollution, - high route accuracy, - quick mobilization of equipment and short completion time, - lower risk of collision with existing installations. Tjdpfx Ajxxhzwsf Asc - no need to use bentonite slurry, - no spoil during jacking Thanks to these features, controlled jacking is commonly used in the construction of municipal networks, water and sewage connections, gas, fiber optic and cable connections. Application of controlled jacking Controlled jacking is ideal wherever installation is required without disrupting the surrounding area. The most common applications for jacking machines are: - crossings under roads and streets with heavy traffic, - jacking under railway and tram tracks, - crossings under watercourses and canals, -installations under sidewalks, parking lots, squares, and industrial areas, - connections to properties without digging up the entire area. With the ALUSTEER product, no drilling mud (bentonite) is used, which significantly reduces implementation costs and environmental impact. This technology can be used both in cities and in non-urban areas – wherever precision, speed, and reduced impact are important. Accuracy and direction control Modern jacking machines use sensors that enable continuous monitoring of the head position. The operator tracks the parameters on the receiver and operator tablet and reacts in case of deviations from the planned route. Such solutions ensure: - high precision of the breakthrough, - safety for the existing infrastructure, - repeatability and predictability of results. In practice, deviations from the jacking axis are usually no more than a few centimeters, which is fully acceptable in most projects.

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 1,064 mm, laser power: 30 W, type of cooling: air, overall weight: 35 kg, warranty duration: 12 months, scan area length: 220 mm, scan area width: 220 mm, Integra Fiber Laser – High-Precision Marking Laser for Series Production & Automation Tjdpfjxvtu Dox Af Ajc GLT – Grossmann Lasertechnik GmbH Made in Germany • Automated • Industry 4.0 Ready The Integra fiber laser is a fully integrated laser marking system designed for industrial series production, providing high cycle rates, precision, and process reliability. By combining fiber laser technology, integrated PLC, and modular machine architecture, the Integra is ideal for production lines, custom machinery, and automated marking stations. Technical Features • Power: 20 – 200 W • Galvo scan head with F-theta optics for maximum engraving speed • Work area: 100×100 mm to 300×300 mm • Integrated PLC with TCP/IP communication and I/O interfaces • Compatible with LightBurn, EZCAD, or custom software • Optional: camera systems, pallet handling, conveyor belt integration • CE-certified, low-maintenance, suitable for continuous operation Advantages • Integration system “Made in Germany” – direct from the manufacturer • Custom machine building & automation according to customer requirements • Full integration into existing production environments • Highest marking quality on metal, stainless steel, aluminum, brass, plastic, and more • German support, online & on-site training, spare parts supply Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Cable and connector identification • Tool and automotive industry • Electronics and plastics processing • Contract marking and custom machine engineering Delivery & Service • Delivery time: 3 – 6 weeks • Delivery, installation, and commissioning throughout Europe • Lifetime after-sales support including remote maintenance

Year of construction: 2010, condition: repair required (used), functionality: limited functionality, controller model: MTT AutoFab, inner dimension height: 250 mm, laser power: 400 W, machine/vehicle number: SLM2501004, laser type: fiber laser, Equipment: dust extraction, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete and the laser has been replaced by the manufacturer. However, the printer has limited functionality with regard to focus quality at the edge areas, which is presumably due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Adjustable output power: 10 - 105 % Long-term output stability: ± 3 % Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Tjdpfx Afoy H Hxyo Ajc Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Electrical voltage: 85 / 240 V AC Current: 15 A Laser hours: 0.1 h Pump runtime: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Nominal temperature: 18 - 30 °C Air pressure: 6 bar Ambient temperature: 0 - 45 °C Dimensions & Weight Dimensions (W x D x H): 3U 19" rack Machine weight: 60 kg EQUIPMENT • Powder System PSH 100 • Extraction and filtration system • Chiller unit • 5x powder bottles (5 L) • 6x substrate plates • 10x filter elements (H13) • 26x wiper lips • Spare sieves • Protective suits • Cleaning wipes for optics (F-theta) • Various small parts & spare components

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) Todpfxoyimpae Af Aec - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Tedpfjhv U Uvsx Af Aec Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, CORMAK WL2000 Laser Welder 3-in-1 is an advanced industrial device using fiber laser technology for precise welding, cutting, and cleaning. Thanks to its compact design and integrated control systems, the machine is an ideal solution for production plants requiring high efficiency, repeatability, and minimal thermal impact on the material. Main advantages of the machine Efficient water cooling system – ensures stable operating temperature and extends the service life of components. Ergonomic welding head – adjustable spot size from 0–5 mm, interchangeable nozzles, 7 m fiber optic cable, and full mobility. Automatic wire feeder – synchronized with the welding machine software, ensuring continuous operation. Welding with or without wire – flexibility in choosing the appropriate welding method. Processing of thin materials – e.g. stainless steel from 0.5 mm thickness. High weld repeatability – durable and aesthetic welds without the need for additional finishing. Optional laser cleaning function – expands the functionality of the device. Faster welding process – up to 3–10 times faster compared to traditional methods. Low indirect radiation level – proper protective glasses are sufficient for safe operation. Design and technology The handheld laser welder WL2000 is equipped with a 2000 W laser source, a water cooling system, and a modern welding head. The control system allows convenient switching between welding, cutting, and cleaning functions. The design enables operation in hard-to-reach areas, while interchangeable nozzles allow welding at various angles. Tjdpfx Asizr Rlef Aec Precision and work efficiency Thanks to the focused laser beam and minimal heat-affected zone, the CORMAK laser welder enables precise and durable welds without the risk of material deformation. High penetration depth and working speed make it an ideal tool for industrial applications where quality, speed, and repeatability are essential. Applications Processing of stainless steel, mild steel, galvanized steel, aluminium, and brass. Industrial plants, metalworking workshops, and production lines. Precision welding of lightweight and thin-walled structures. Removal of coatings and cleaning of metal surfaces. Standard equipment Laser welder with integrated water cooling system. Welding gun with focal length adjustment and accessory set. MaxPhotonics laser source. Automatic wire feeder. Complete set of connection cables. Starter kit of nozzles and protective lenses. Optional equipment Optical set for laser cleaning – PLN 1500 net. Training materials and support CORMAK provides instructional videos on its YouTube channel to help with machine commissioning and operation. This is valuable support for operators, especially during the initial period of using the device. Technical specifications Parameter Value Maximum laser power 2000 W Laser wavelength 1080 nm Penetration depth (stainless steel at 1 m/min) 4.60 mm Penetration depth (mild steel at 1 m/min) 3.60 mm Penetration depth (aluminium at 1 m/min) 4.10 mm Penetration depth (brass at 1 m/min) 4.10 mm Welding speed 0–120 mm/s Automatic wire feeder Ø 0.8–1.6 mm Maximum power consumption ≤6.05 kW Cooling system Water cooling Operating voltage 230 V Shielding gas consumption Approx. 10–12 L/min depending on wire diameter Dimensions 600 × 1100 × 1100 mm Weight 185 kg

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm Tedpfx Aeup Uzxjf Aec - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit Todpsthit Ejfx Af Aec - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 63,000 h, laser type: fiber laser, laser hours: 48,000 h, laser power: 3,000 W, Equipment: CE marking, documentation/manual, Model: TruLaser 5030 fiber (L41) Year of manufacture: 2013 A new cutting head was installed in 6/2026! Machine hours: 63,000 machine hours, 48,000 laser hours Working area: 3000 x 1500 mm Standard equipment Machine • Enclosed machine frame • Torque drive in combination with linear direct drives • Enclosed beam guidance via fiber optic cable • Machine cooling unit (water-air) • Integrated control cabinets with interior lighting • Automatic pallet changer in the longitudinal direction • Wide longitudinal conveyor belt • Power supply for TruDisk via the machine • Work area lighting • Positioning laser diode • Spray device • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning TRUMPF Laser Todpfszrxdvox Af Aec • Solid-state laser TruDisk 3001 with one fiber optic cable outlet • Fiber optic cable according to standard layout • Laser cooling unit (water-air) • Excitation via pump diodes • Laser power control • Laser logbook function Cutting head • Universal cutting head with fully adaptive lens system • Protective glass against lens contamination • Condition monitoring of the protective glass • ControlLine: Height control and sheet edge detection Control system • Control system SINUMERIK 840D SL • 17" touch color screen • Simple workshop programming • Advanced workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • FastLine • AdjustLine • Teleservice via internet data transmission • USB interface • RJ-45 network connection Safety • CE marking • Light curtains • Multi-chamber extraction system • Integrated compact dust extraction system • Fire alarm system in the compact dust extractor • Machine enclosure, certified viewing window, door on the right • Electric roll-up roof

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, Used LVD PHOENIX FL 3015 Fiber laser cutting machine in excellent condition for sale. This is a dynamic and versatile laser cutting machine designed for precise and fast cutting of various types and thicknesses of metal sheets. The reliable LVD construction, combined with the IPG Fiber laser source, ensures high cutting quality, performance, and low operating costs. The machine is fully functional and can be inspected and tested at our warehouse. Equipment: Automatic exchangeable work tables IPG Fiber laser source – 6 kW 10 kW laser cutting head LVD Touch-L control system Automatic focus adjustment Automatic nozzle changer Automatic nozzle calibration Automatic nozzle cleaning Nozzle magazine with up to 10 positions Automatic sheet position detection Automatic cutting gas selection (oxygen, nitrogen) Cooling system Fume extraction system Sheet cleaning comb Interface with sheet storage Technical specifications Manufacturer: LVD Model: PHOENIX FL 3015 Fiber Year of manufacture: 2017/08 Laser source: IPG Fiber Laser power: 6 kW Operating parameters Tsdpfx Aozhmtwef Asc Maximum sheet size: 3050 × 1525 mm X-axis travel: 3185 mm Y-axis travel: 1560 mm Z-axis travel: 130 mm Maximum table load: 750 kg Table change time: 35 s Maximum X-Y positioning speed: 140 m/min Repeatability accuracy: ±0.025 mm Maximum cutting thicknesses Structural steel (O₂): 30 mm Structural steel (N₂): 8 mm Stainless steel (N₂): 25 mm Aluminum (N₂): 25 mm Copper (O₂): 6 mm Brass (N₂): 12 mm Operating hours Power ON hours: 51,061 h Cutting hours: 24,262 h Application Ideally suited for sheet metal processing companies, metal structure manufacturers, ventilation system manufacturers, and manufacturers in the automotive, agricultural machinery, and other industries that produce precision metal products and require fast, accurate, and reliable laser metal cutting. If you have any further questions, we will be happy to answer them.

Condition: good (used), mileage: 2,04,500 km, first registration: 07/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,600 mm, fuel: diesel, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2018, Equipment: AdBlue, EBS, central locking, crane, cruise control, electric window regulation, fog lights, parking heater, power assisted steering, seat heater, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Brake booster - Alloy wheels - PTO (Power Take-Off) - Rain sensor - Rearview camera - Sleeper cab - Heated seats - Sun visor - Stability control - Auxiliary heater - Toolbox - Tow hitch = Further Information = Tsdpfxoz H Aa Us Af Ajc General Information Usable material: Concrete Axle Configuration Brakes: Disc brakes Front Axle 1: Tire size: 385/65R22.5; Alloy wheels; Max. axle load: 8000 kg; Steerable; Tire tread left: 50%; Suspension: Leaf spring suspension Front Axle 2: Tire size: 315/80R22.5; Dual tires; Alloy wheels; Max. axle load: 9500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: External planetary axles; Suspension: Air suspension Rear Axle 1: Tire size: 315/80R22.5; Dual tires; Alloy wheels; Max. axle load: 9500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: External planetary axles; Suspension: Air suspension Rear Axle 2: Tire size: 385/65R22.5; Alloy wheels; Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread left: 40%; Tire tread right: 40%; Suspension: Air suspension Functional Crane: MSM 9.5m, manufactured in 2018, mounted at the rear of the chassis Pump: Yes Water system: Yes Hoses: Yes Maintenance, History, and Condition APK (Technical Inspection): Valid until 03/2027 Technical condition: good Optical condition: average