Used Quick-Release Fasteners for sale (6,414)

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position Fodpfx Aaexaarqetspl - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts Fjdpshhzl Hsfx Aatepl best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle Fpedpfxsxz Hhzj Aatsl -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: new, Year of construction: 2025, Edge banding machine F5 with PLC control (including 15" touchscreen), hot melt adhesive application to the workpiece for edge banding material up to 3 mm: Joint milling cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with interchangeable pot preparation, including adhesive dispensing device, HF milling station with pneumatic milling adjustment, including corner rounding milling cutter, radius trimming knife, edge trimming knife (including pneumatic extraction device), finishing station Joint head Whispercut Combination milling head Radius milling cutter R=2mm Fpjdpfx Aaoh Hl Ayjtjl Radius corner milling cutter R=2mm Quick-change preparation for corner milling cutter Radius change motor R=1mm Multi-radius trimming knife R1/R2 Chassis Spray device for release agent (PUR) Spray device for cleaning agent (PUR) pneumatic 3-point adjustment LED lighting INCLUDING 2nd interchangeable glue pot max. edge thickness 3mm Workpiece thickness 8-50mm min. workpiece length approx. 160mm Feed speed 10m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300x1300x1400mm LxWxH Weight approx. 900kg Extraction port 1 x 140mm

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,981 mm, total width: 2,474 mm, total height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Fuel consumption figures apply to the base vehicle before conversion. Internal number: 4384.CHO25.RA86430---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Exterior mirrors, electrically adjustable, heated and foldable * Seats: Rear seats deleted * Seat Package 14: Driver's seat, 4-way adjustable - Single passenger seat, 4-way adjustable - Headrests, height-adjustable - Seat heating for driver and passenger - Interior armrest for driver and passenger seat - Lumbar support, manual (driver's seat) - Seat upholstery: Fabric * Auxiliary heating package 1: Auxiliary heater (fuel-powered auxiliary heater), programmable, incl. remote control - incl. cold start package (-29 degrees) * Technology Package 10: Windshield, heated - Windshield wipers with rain sensor - Parking pilot system, front and rear - Emergency brake assist, active (camera-based) - Lane keeping assist with driver drowsiness alert and high beam assist, additionally with lane departure warning - Headlight assist with day/night sensor - Cruise control system - Rear view camera - LED downlight - Fog lights - Ford audio system with 4-inch multi-function display * Heat protection glazing, medium tint * KMP conversion: Linear lift AMF Solid (hazard warning lights, side protection rails, anti-roll system) - MobileFlex floor system - Bus hoop B-pillar - Automatic diagonal seat belt with height adjustment - Automatic three-point seat belt with adjustable belt retractor and sliding element for height adjustment - Wheelchair and passenger restraint system with retractor belts - Storage box, gray - LED additional turn signals, rear/flat - Step, Börde aluminum - Linea EcoLeg single seat (integrated headrest, automatic three-point seat belt, right armrest, central footrest with quick release) Fodpfxsvv Auko Aatopl FURTHER EQUIPMENT * 1 battery * Airbags, driver and passenger side * ABS with electronic brake force distribution * Battery runtime, programming of battery runtime to 10 min * Floor, rubberized (in driver's cab and passenger compartment) * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Headliner, complete * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper incl. washer nozzle * ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake support incl. emergency brake light * Passenger compartment lighting with delay circuit * Windows, 2nd row: Side windows, fixed, right * Power windows, front, with quick-down/up function for driver's side * Ford Easy Fuel - Comfort fuel filler flap and misfueling protection * Generator, high-performance version * Glove compartment with lockable lid * Interior lighting with delay circuit with front reading lights * Air conditioning, front, incl. dust and pollen filter * Fuel tank, 70 l * Steering wheel: Artificial leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency call assist * Particulate filter: Diesel particulate filter * Wheels: Wheel covers * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Headlights, low beam: Halogen headlights with daytime running lights * Sliding door, right * Mud flaps, rear * Side protection strips * Side paneling, low * Power steering * Seat belts - Seat belt pretensioners and force limite

Condition: used, mileage: 11,880 km, power: 120 kW (163.15 HP), color: blue, gearing type: automatic, number of seats: 9, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly ask you to arrange an appointment. Mr. Kiel will be happy to assist you, phone: BH1 HOLD function, C70 pedestrian protection, CF7 comfort suspension, CL1 steering wheel adjustable in height and tilt, CL4 multifunction steering wheel with trip computer, CU4 aerodynamics package, E07 hill start assist, E1D DIGITAL RADIO (DAB), E34 buffer battery for starting process, E3C Audio 30, E57 electrical wiring for trailer socket, ED4 AGM battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES3 12V sockets for rear seat rows right and left, EZ5 parking package, EZ8 PARKTRONIC, F48 heated windshield washer system, F64 exterior mirrors electrically folding, F66 lockable glove compartment, F68 exterior mirrors heated and electrically adjustable, F72 exterior and interior mirrors automatically dimming, FG9 attachable cup holder on rear armrests, FKB COMBI VAN, FP2 mirror package Vito, FR1 rear camera not retractable, FR8 reversing camera, FS5 illuminated mirrors for sun visors, FZ8 comfort opening and closing with IR remote control, G43 9G-TRONIC, H00 warm air duct to passenger compartment, H16 driver's seat heating, H20 all-around heat-insulating glass, HH9 semi-automatic climate control TEMPMATIC, HZ7 semi-automatic climate control system TEMPMATIC in rear, IN2 wheelbase 3200 mm, long overhang, J55 seatbelt warning system for front passenger seat, JA1 warning lamp for windshield washer fluid level, JF1 rain sensor, JH3 communication module (LTE) for digital services, JK3 instrument cluster with pixel matrix display, JW8 ATTENTION ASSIST, JX2 maintenance interval 40,000 km, K51 misfuelling protection, KB5 main tank 70 liters, L LEFT-HAND DRIVE, LA2 light assistant, LC4 comfort roof control unit, LC8 tailgate ambient lighting, LD9 passenger compartment light(s) in rear, LE1 adaptive brake light, LG2 LED Intelligent Light System, LG4 tail, brake, and indicator lights in LED technology, MJ8 ECO start-stop function, MK8 speed limit 210 km/h, MO6 emission class Euro 6d M/N1 GR. II, MS1 cruise control, MU4 OM 654 DE 20 LA 120 kW (163 HP) 3800 rpm, MX0 BlueEFFICIENCY package, RY2 wireless tire pressure monitoring, front and rear axle, S23 double passenger seat, SA6 passenger airbag, SB1 comfort driver's seat, SH1 thorax-pelvis sidebag driver, SH9 windowbags for driver and passenger, T14 active latch sliding door, T70 child safety locks on passenger compartment doors, T74 entry grab handle, T75 entry grab handles for driver and passenger, U3V vis-a-vis seating mounting, 1st row rear seat tracks, U73 armrests for passenger compartment seating, UR1 seat rail system with quick-release mechanism, US4 comfort 3-seater bench 1st row, outer seat foldable, US5 comfort 3-seater bench 2nd row, outer seat foldable, V23 high-grade interior trim, V36 headlining, V41 TPO plastic floor in passenger compartment, VF4 Caluma fabric black, VH1 grab handle at rear, VV9 mounting points in roof frame, W16 fixed window front left, in sidewall/sliding door, W17 fixed window front right, in sidewall/sliding door, W32 electric opening window rear passenger compartment, W65 tailgate, W70 tinted windows in rear compartment, privacy glass, W78 window in tailgate with washer and wiper system We will be happy to make you an offer for the trade-in of your used vehicle. Should you wish to lease or finance your vehicle, we are happy to provide you with a tailored offer. Fsdpeyfp Efsfx Aatopl Errors and prior sale reserved. Mr. Kiel will be h

Condition: used, mileage: 25,000 km, power: 120 kW (163.15 HP), first registration: 07/2025, fuel type: diesel, color: grey, gearing type: automatic, number of seats: 8, total length: 4,895 mm, total width: 2,244 mm, total height: 1,910 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * 2-way speakers front and rear * Comfort 3-seater bench, 1st row, outer seat foldable * Comfort 3-seater bench, 2nd row, outer seat foldable * 9G-TRONIC automatic transmission * Adaptive brake light * Aerodynamics package * Passenger airbag * Active Brake Assist * Active door retainer for sliding door * Active Lane Keeping Assist * Acoustic package * Trailer load capacity 2500 kg * Detachable ball-type trailer coupling * Armrests for passenger area seating * Exit lights * Electrically folding exterior mirrors * Heated and electrically adjustable exterior mirrors * Lighting in rear grab handle with reading spotlight * Illuminated vanity mirrors * Front footwell lighting * BlueEFFICIENCY package * Brake force booster failure compensation * CO2-optimized braking system * Chrome interior package * Privacy glazing in rear, tinted glass * DIGITAL RADIO (DAB) * Roof cladding * Double cup holder in center cockpit * ECO start/stop function * EMISSION CLASS EURO 6E UP TO M1 * Automatic headlamp control * Misfuelling protection * Fixed rear window * Tailgate window with wiper and washer system * Front right window, fixed in side wall/sliding door * Front left window, fixed in side wall/sliding door * Electric parking brake * Speed limiter 210 km/h * Weight variant 3,100 kg * Belt warning for front passenger seat * HOLD function * Entry grab rails for driver and front passenger * Main tank 70 liters * Interior and ambient lighting for combi * Automatically dimming interior mirror * Premium interior trim * COMBI VEHICLE * Passive child detection in vehicle * Child safety locks for rear passenger doors * Semi-automatic climate control, TEMPMATIC in rear * Automatic climate control THERMOTRONIC * Instrument cluster with color display * Comfort front passenger seat * Comfort roof control unit * Comfort driver seat * Comfort suspension * Comfort closing * Communication module (LTE) for digital services * PAINT COLOR GRAPHITE GREY METALLIC DARK MB 7831 * Leather steering wheel * Live Traffic Information * Lumbar support driver and passenger seat * MBUX multimedia system * MULTIBEAM LED with High Beam Assist PLUS * Mercedes-Benz MobiloVan with DSB and GgD * Mercedes-Benz emergency call system * Metallic paint * Center console with storage compartment * Multi-button remote control * Multifunction steering wheel Fodpfx Aey Nvg Esatspl * Rear compartment night lighting * Navigation system * OM 654 DE 20 LA 120 kW (163 hp) 3800 rpm * Breakdown management * Parking package with reversing camera * Wheelbase 3200 mm, long rear overhang * Wireless tire pressure monitoring front and rear axle * Sliding door left * Tail/brake/blinker lights in LED technology * Face-to-face seat mounting 1st rear seat row, rails * Driver seat occupancy detection * Heated passenger seat * Heated driver seat * Seat cushion depth adjustment passenger seat * Seat cushion depth adjustment driver seat * Quick-release seat rail system * Smartphone integration package * Vito Mirror Package * 12V socket in boot/cargo area * 12V sockets for rear passenger rows right & left * Fabric Caluma black * CRUISE CONTROL * Thorax-pelvis sidebag passenger * Thorax-pelvis sidebag driver * Blind Spot Assist * Tourer SELECT * Ambient lighting for tailgate * Traffic Sign Assist * Front axle with increased load capacity * Preparation for Remote Services Plus * Warm air duct to passenger compartment * Heated Wet Wiper blades * Window airbags for driver and front passenger * All-round heat-insulating glass * Electric auxiliary heat

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 935 mm, throat depth: 410 mm, working width: 3,100 mm, bending force (max.): 135 t, distance between stands: 2,600 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: motor-driven, actuation type: hydraulic, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven back gauge (X=750 mm, R=250 mm) with ±0.03 mm accuracy • European-style Promecam quick-release tooling system • Sliding front support system • Manual crowning system (Original WILA wedge) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel, V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options from X+R onwards • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel tooling • Back gauge X distance up to 1000 mm • AKAS or DSP front safety laser system • Additional back gauge fingers • Additional back gauge tongues Fodox Nn N Ejpfx Aatjpl TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 135 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Daylight) (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 210 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 180 Machine Weight (kg) 8350 Main Motor (kW) 11 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axis) Back Gauge X stroke (mm) 750 Back Gauge R stroke (mm) 250 Crowning Manual (WILA wedge) Safety System Front laser safety Origin Turkey

Condition: new, Year of construction: 2025, stroke length: 300 mm, operating speed: 10 mm/s, reverse speed: 95 mm/s, controller manufacturer: ESA - DELEM - Cybelec, working width: 3,100 mm, bending force (max.): 100 t, distance between stands: 3,345 mm, control type: CNC control, number of axes: 4, actuation type: electric, BELT-DRIVEN SERVO CNC PRESS BRAKE Bending Capacity: 3100 mm / 100 Tons (E100 Model) STANDARD FEATURES - CNC-controlled belt-driven servo press brake - Y1 – Y2 – X – R axes CNC controlled (4 axes) - CNC controller (ESA S830 – 10” color touchscreen, 2D graphical display) - Automatic bending calculation and anti-collision functions - High-precision synchronized servo drive system - Belt-driven upper beam movement system, oil-free and requiring low maintenance - Spring-supported upper beam structure supporting energy recuperation - O-type frame design for minimal deformation - 300 mm stroke - 410 mm throat depth - Servo motorized backgauge system (X + R axes) - Backgauge precision: ±0.03 mm - Backgauge travel distances: - X axis: 750 mm - R axis: 250 mm - Hardened ball screws and linear guides - Two 3-stage backgauge fingers - European type upper tool holder – quick release (Promecam type) - European type narrow lower table - Standard upper punch (H: 67 mm – 85° – R: 0.8 mm) - Standard lower die (60×60 mm – 4V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) - High-precision optical linear scales - LED illuminated working area - Sliding type front support arms - Double foot pedals - Emergency stop buttons - Safety equipment conforming to CE standards OPTIONAL FEATURES - Additional backgauge axes (Z1 – Z2 – X5) - Backgauge travel extension to 1000 mm - Motorized crowning system - Hydraulic upper and lower tool clamping systems - Front safety laser system (AKAS or DSP type) - Rear safety light curtain - CNC-controlled sheet support arms - Laser bending line - Laser angle measurement system - Automatic angle measurement systems - Air-conditioned electrical cabinet cooling system - Additional backgauge fingers - Custom tool and table solutions TECHNICAL SPECIFICATIONS (E100 / 3100 MODEL) - Bending force: 100 tons - Bending length: 3100 mm - Distance between side frames: 3345 mm Fjdpfx Aaex Nqukotspl - Stroke: 300 mm - Throat depth: O-Type frame - Open height (daylight): 515 mm - Table height: 900 mm Speeds - Approach speed: 95 mm/s - Bending speed: 10 mm/s (in compliance with CE standard) - Return speed: 95 mm/s Backgauge - X axis travel: 750 mm - R axis travel: 250 mm - X axis speed: 400 mm/s - R axis speed: 100 mm/s - Z axis speed: 600 mm/s General - Main motor power: 2 × 5.5 kW - Machine weight: ~7,500 kg - Machine dimensions (L×W×H): approx. 4600 × 2000 × 2650 mm

Condition: used, mileage: 86,332 km, power: 350 kW (475.87 HP), axle configuration: 6x4, color: red, driver cabin: day cab, gearing type: automatic, total length: 80,000 mm, total width: 26,000 mm, total height: 35,000 mm, loading space length: 48,200 mm, loading space width: 24,000 mm, loading space height: 9,500 mm, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, - Braking system For inquiries regarding the vehicle, please contact Mr. Seidel (at phone number...). Mercedes-Benz Arocs 2648 K 6x4 Dautel three-way tipper Fpsdpfx Asztlt Heatsl Thermo-insulated Dautel 3-way tipper, with sideboards, tilting mechanism for asphalt/grain, electronic sliding tarpaulin, A1C front axle 7.5 t, A1Y front axle, straight design, A2G rear axle, bevel gear 300, planetary gears, 13.4 t, A5Y axle ratio i = 4.333, B1B electronic braking system with ABS and ASR, B1Z ABS, switchable, B2A disc brake, on front and rear axles, B2E disc brakes with full protection, B2X parking brake, electronic, B3H secondary water retarder, B4A condensate monitoring, for compressed air system, B4L compressed air tank, aluminum, complete, B5B trailer brake, 2-line, C0B frame overhang 800 mm, C1R wheelbase 3600 mm, C5J fastening parts, for tipper, C5P frame bolted, C6C steering, 1-circuit, C6J steering assist pump, unregulated, C6Q stabilizer, front axle, C6Y stabilizer, under frame, rear axle, C7K battery carrier, batteries stacked, C8F fender, for chassis transport, C9Y omission of rear underrun protection (ECE), CLW steering oil cooler, D0L smoker package, D0S compressed air connection, in the cab, D1D driver's air-suspension seat, climate control, D1N co-driver's functional seat, D2N seat back, release mechanism, driver's seat, D2W armrests, on both sides, co-driver's seat, D3K seat cover, Dinamica, black, driver's seat, D3T seat cover, velour, co-driver's seat, D4Y sun visor, side, driver's side, D6G automatic climate control, D6I waste heat recovery, D6M hot water auxiliary heater, cab, D7G storage compartment lid, driver and co-driver side, D7R storage flaps, above windshield, D8A roof hatch/ventilation flap, roof, E3W PSM 2nd generation, E4B interface, Fleet Management System FMS, E5H switch for night running lights, E6A trailer socket 24 V, 15-pin, E6Z reversing warning, F0Y mirror cover, construction vehicle, F1B M-cab ClassicSpace, 2.30 m, tunnel 170 mm, F3B cab mounting, comfort, steel-sprung, F4I cab rear wall, with window, F4X storage compartment exterior flap, left, F5L external sun visor, transparent, F6C windshield tinted, F6I front mirror, heated, F6Q compressed air horn, F7Y cab entry left/right, movable, F7Z step, with handrail on the roof, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, G0B powertrain, 44 t to 80 t, G0R gearbox torque arms, optimized for installation, G0T Predictive Powertrain Control, G0W offroad driving program, G2F gearbox G 330-12/11.63-0.77, G5A single-disc clutch, G5G Mercedes PowerShift 3, I2H tires, tubeless, 315/80 R 22.5 rear axle, I2P tires, tubeless, 385/65 R 22.5 front axle/front steered axle/rear steered axle, I4I wheel formula 6x4, I5F 26-ton vehicle, I6I vehicle production site Wörth, I6W leaf suspension, rear axle, J1O tachograph, digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2G digital radio, J2K speakers, 2-way system, J2U navigation system, J2Y CB radio, 24 V, J3U prerequisite Fleetboard Manager App, J3V Truck Data Center 7, J6C multimedia cockpit, interactive, J6Y Remote Online, J6Z pre-equipment for Mercedes-Benz Truck App Portal, J8Y pre-equipment for Truck Data Center 7, J9D pre-equipment for toll collection, K1C fuel tank 290 l, left, 650 x 565 x 950 mm, aluminum, K3V AdBlue tank 60 l, left, K5S protective cap for AdBlue dosing system, K7D exhaust system, tailpipe to the right side, L0A lighting regulation, according to UN-R

Condition: used, mileage: 44,868 km, power: 120 kW (163.15 HP), first registration: 05/2025, fuel type: diesel, overall weight: 3,200 kg, color: silver, gearing type: automatic, number of seats: 9, total length: 5,370 mm, total width: 2,244 mm, total height: 1,890 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263345 1st owner, accident-free, with complete service history, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter Package * Electric operation for right sliding door * Electric operation for left sliding door * Mirror Package Vito Fpedpfszzuz Njx Aatsl * Auxiliary heater, electric * BlueEFFICIENCY Package * Smoker Package * Tourer PRO * Aerodynamics Package ASSISTANCE SYSTEMS * Blind Spot Assist * Active Brake Assist * HOLD function * Mercedes-Benz emergency call system * Breakdown management * Traffic Sign Assist * Active Lane Keeping Assist * Parking Package with reversing camera * ATTENTION ASSIST * Headlamp Assist * ECO Start/Stop function * TEMPOMAT (cruise control) ENGINE, TRANSMISSION & CHASSIS * Comfort suspension * 9G-TRONIC AUDIO & COMMUNICATION * Digital radio (DAB) * MBUX multimedia system * 2-way speakers front and rear * Communication module (LTE) for digital services * Instrument cluster with color display INTERIOR * Multifunction steering wheel * Steering wheel adjustable in inclination and height * Lockable glove compartment * Interior rearview mirror, automatically dimming * Warm air duct to passenger compartment * Seat heating for front passenger * Seat heating for driver * Semi-automatic controlled TEMPMATIC air conditioning * Climate zone 1 (cold/comfort) * Comfort roof control unit * Interior light(s) in the rear * Front passenger seat, single seat * Airbag, front passenger * Comfort driver's seat * Lumbar support, driver's seat * Thorax-pelvis sidebag, driver * Thorax-pelvis sidebag, front passenger * Windowbags for driver and front passenger * Seat rails with quick-release, 3 rails * Armrests for seating in passenger compartment * Interior trim, premium version * Plastic floor covering TPO in passenger compartment * Fabric Caluma black * Grab handle in the rear * Attachment points in the roof frame LIGHT & SIGHT * Adaptive brake light * Window front left, fixed in side wall/sliding door TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Comfort closing function * Anti-theft alarm system * Seat belt warning for front passenger seat * Seat occupancy recognition, driver's seat * Child safety lock on doors in passenger compartment EXTERIOR * Exterior mirrors, electrically foldable * Exterior mirrors, heated and electrically adjustable * Heat-insulating glass all around * Metallic paint * Active sliding door locking mechanism * Sliding door left * Roof liner * Window fixed rear * EASY-PACK tailgate * Tinted glass in the rear, black * hightechsilber metallic OTHER EQUIPMENT * Front axle with increased load capacity * Fleece battery 12 V 92 Ah * Model series C447 Vito/V-Class * Basic * Head unit Europe/CIS countries/Mongolia * Wheelbase 3430 mm, long overhang * Service interval 40,000 km * Main tank 70 liters * Exhaust gas cleaning SCR generation 4 * Europe * Generator 14 V / 250 A * Vehicle HVO compatible * Generator management * Rating country set Euro-NCAP * Grab handle for entry * Manufacturer Mercedes-Benz AG * Weight variant 3,200 kg * Model refinement * Signage / printed matter German * Control code change WLTP * Distribution code 0 * Combined vehicle Further features * Digital extra: Updates intelligent speed assist * Brake force compensation in case of brake booster failure * CO2-optimized brake system * Digital extra: Hard disk navigation * Digital extra: Smartphone integration * Digital extra: Remote Services Plus * Digital extra: Live Traffic Information * Refrigerant R-1234yf * Rear interi

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 09/2026, fuel type: diesel, overall weight: 3,225 kg, color: blue, gearing type: automatic, number of seats: 3, total length: 5,050 mm, total width: 2,275 mm, total height: 1,971 mm, loading space length: 2,602 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4510.NW26.TP71634 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Tow hitch, electrically swiveling * Ford audio system with 13-inch multifunction display and Ford SYNC 4 incl. navigation - DAB/DAB+ - vehicle modem - integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Fuel tank 70 l * Load securing package: Airline rails on the side walls, left and right, in the middle position, for load securing and 8 tie-down points, including load securing box with ratchet straps and hooks * Load securing net package: Horizontal load securing net in the cargo area - load securing net on the tailgate * Heated steering wheel * Sliding door, left and right Fpjdpfxezz Uhvs Aatol * Auxiliary heater (fuel-powered water heater) with remote control incl. H7 AGM dual battery * Technology package 6: Exterior mirrors, electrically adjustable, heated and foldable - Blind Spot Assist including rear parking assist - Pre-Collision Assist, camera and radar-based - Driver drowsiness warning - Lane Keeping Assist including Lane Keeping Aid and Lane Change Assist - Traffic Sign Recognition - Wrong-way driver warning function - Park Pilot system front/rear - Adaptive Cruise Control including Stop & Go function - Intelligent Speed Limiter with speed limit display - All-around camera - Steering wheel, Sensico in leather-look FURTHER EQUIPMENT * 2-stage release for passenger compartment and cargo area * Airbag passenger side - with airbag deactivation function * Airbag driver side * All-wheel drive * Anti-lock braking system with electronic brake force distribution * Roof console * Double-wing rear door (without window), unlockable from 90° to 168° * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Vehicle floor in driver's cabin, rubberized * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Power windows front, electric - with quick-up/down function * Parking brake, electric * Ford Key Free System - incl. Ford Power Start function * Windshield, heated * Glove compartment with lockable lid * Interior lighting front * Automatic climate control 2-zone - with automatic temperature control, can be adjusted separately for driver and passenger side - auxiliary heater, electric * Headrests front * LED rear lights * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED turn signals in front - Cornering lights, static - High beam assist * Cargo area lighting (LED) - extra bright * Cargo area floor: Vinyl floor covering "Easy Clean" * Charging station, inductive, for mobile devices - according to Qi standard * Center console, small * Emergency Call Assistant eCall * Particle filter: Diesel particle filter * Radio accessories: 4 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 with 215/60 R17C 109/107T tires - in sport design in matte black * Gear shift on the steering column * Windshield wipers with rain sensor * Sliding door: Power assist closing - assisted manual closing of the sliding door * Mud flaps front * Side wall paneling high including paneling of the tailgate * Power steering * Seat belts - Seat belt pretensioners and force limiters front - Warning system for unfastened driver's seat belt * Seat package 52: Driver's seat 5-way electrically adjustable - Double passenger seat with load-through flap - Seat heatin

Condition: used, mileage: 51,341 km, power: 120 kW (163.15 HP), first registration: 05/2025, fuel type: diesel, overall weight: 3,200 kg, color: grey, gearing type: automatic, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263296 Former non-binding recommended retail price of the automobile manufacturer: 80,746 € 1st owner, accident-free, with complete service history, non-smoking vehicle ---- HIGHLIGHTS & PACKAGES * Winter package * Electric operation for left sliding door * Electric operation for right sliding door * Electric auxiliary heater * Mirror package Vito * Smoker's package * Tourer PRO * BlueEFFICIENCY package ASSISTANCE SYSTEMS * Blind Spot Assist * Mercedes-Benz emergency call system * Breakdown management * ECO Start-Stop function * TEMPOMAT (cruise control) * Headlamp Assist * ATTENTION ASSIST * HOLD function * Active Brake Assist * Traffic Sign Assist * Active Lane Keeping Assist * Parking package with reversing camera ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC * Comfort suspension AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * 2-way speakers front and rear * Communication module (LTE) for digital services * MBUX multimedia system INTERIOR * Interior trim, high-quality design * Lumbar support for driver's seat * Semi-automatic TEMPMATIC climate control system * Hot air duct to the passenger compartment * Climate zone 1 (cold/comfort) * TPO plastic flooring in the passenger compartment * Multifunction steering wheel * Seat heating for driver * Seat heating for front passenger * Attachment points in the roof frame * Thorax-pelvis sidebag for front passenger * Thorax-pelvis sidebag for driver * Windowbags for driver and front passenger * Fabric Caluma black * Lockable glove compartment * Seat rails with quick-release mechanism, 3 rails * Comfort roof control unit * Interior mirror with automatic anti-glare function * Airbag for front passenger * Grab handle in the rear * Interior lights in the rear * Comfort driver's seat * Front passenger seat, two-seater * Steering wheel adjustable for tilt and height * Armrests for seating in the passenger compartment LIGHT & VISION * Window front left, fixed in side wall/sliding door * Adaptive brake light TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Child safety lock on doors in the passenger compartment * Comfort closing function * Seatbelt warning system for front passenger seat * Seat occupancy recognition for driver's seat * Anti-theft and burglary alarm system EXTERIOR * Roof lining * Heated windshield washer system * EASY-PACK tailgate * Tinted glass in the rear, black glass * Metallic paint * Active sliding door lock * Sliding door left * Electrically foldable exterior mirrors * Heat-insulating glass all around * Exterior mirrors, heated and electrically adjustable * Window fixed in the rear OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * Grab handle for entry * Model series C447 Vito/V-Class * Combination vehicle * Weight variant 3,200 kg * Fleece battery 12 V 92 Ah * Front axle with increased load capacity * Service interval 40,000 km Fjdpfx Aaozr Tgfjtjpl * Main tank 70 liters * Generator 14 V / 250 A * Signage / Printed materials in German * Basic * Model refinement * Generator management * Head unit Europe/CIS/Mongolia Further characteristics * Model year G4-II * Digital extra: Hard disk navigation * AEJ X4/1 * Model year 5 * 3-seater comfort bench seat EASY-ENTRY in the 2nd row in the rear * 3-seater comfort bench seat EASY-ENTRY in the 1st row in the rear * Model generation 2 * Window in tailgate with wiper and washer system * Digital extra: Smartphone integration * Window right, f

Condition: excellent (used), Year of construction: 2015, REFORM M14 Hydro carrier with R2 rotary harrow Technical data: Fpedpfx Aajizi Najtjl ENGINE: 4-stroke gasoline engine: 21 hp Briggs & Stratton, 2-cylinder, 4-stroke gasoline engine DRIVE: hydrostatic, continuously variable drive, direction and speed adjustable electro-hydraulically via rocker switches on the steering handle with integrated, continuously adjustable creep speed control. SPEED: Forward 0 - 9.0 km/h, Reverse 0 - 4.0 km/h AXLE: continuously adjustable in length (120 mm) for center of gravity adjustment or to reduce load on the implement STEERING: finely adjustable hydraulic steering, operated via 2 steering levers on the left and right of the handle. Hydraulic differential lock effect when driving straight. IMPLEMENT ATTACHMENT: self-centering quick-release coupling PTO SHAFT: drive-independent front PTO shaft, 874 rpm at 3400 rpm engine speed, clockwise rotation EQUIPMENT: elastically mounted, height- and side-adjustable steering handle, emergency stop lever on the left on the steering handle grip WEIGHT: 220 kg Tires: 23x8.50-12AS Terra low-pressure wide tires Attached implement: - R2 MTL-100 rotary harrow (unused) This REFORM M14 is in very good overall condition, has just been serviced, and is ready for immediate use! - The price is quoted excluding 19% VAT. - Inspection/test drive is possible at any time. - Shipping by freight forwarder: €220 - Financing/leasing can be arranged individually for you!

Condition: new, Year of construction: 2024, load capacity: 600 kg, Welding rotary table KT 600, with 100mm through hole Load horizontally 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 650mm Height 700mm, width 800mm, length 800mm Thcafi2V2 Weight 155 KG Infinitely variable electric tilt range 0 – 90° Speed 0.3 – 2.5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Quick-release jaw chuck Fpsdpfx Aaevu Dqqjtol Diameter 400mm, €550 Diameter 500mm, €750 CE mark/approval

Condition: used, mileage: 87,100 km, power: 120 kW (163.15 HP), first registration: 02/2023, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, Q50 Trailer coupling, ball head detachable, EY5 Mercedes-Benz emergency call system, WD0 Control code, plant 157, EY6 Breakdown assistance, G43 9G-TRONIC, CM2 Bumpers and attachments painted in vehicle color, FS5 Illuminated mirrors for sun visors, FC1 Electronic key in chrome look, JK5 Instrument cluster with color display, RS7 Steel wheels 6.5 J x 17, EZ5 Parking package, XO7 Mercedes-Benz Mobilo with extended warranty and roadside assistance, EZ8 PARKTRONIC, T70 Childproof lock on doors in the passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, CF7 Comfort suspension, UR1 Seat rail system with quick-release mechanism, E1E Digital extra: hard disk navigation, HH9 Semi-automatic climate control system TEMPMATIC, V36 Headliner, E1D Digital radio (DAB), Y10 First-aid kit, MJ8 ECO start-stop function, IB6 Model series C447 Vito/V-Class, Z2X RISE, ES2 12 V socket in trunk/cargo area, VD5 Interior headliner, crystal gray, RD8 Wheel arch trim, E1T Touchpad, H00 Warm air duct to passenger compartment, MS1 TEMPOMAT, IK3 Luxury van, HI1 Climate zone 1 (cold/comfort), V41 Plastic floor TPO in passenger compartment, US5 3-seater comfort bench seat EASY-ENTRY in 2nd row in the rear, V44 Carpet in vehicle interior, front, W65 Rear liftgate, RM4 Comfort tires, US7 Comfort seat in 1st row in the rear, right, US6 Comfort seat in 1st row in the rear, left, Z42 Approved as a passenger car, LA2 Headlight assistant, C70 Pedestrian protection, RM7 Summer tires, HZ0 Auxiliary heater, electric, E34 Buffer battery for starting, J55 Seatbelt warning system for passenger seat, H16 Seat heating for driver, H15 Seat heating for passenger, XA8 Weight variant 3,100 kg, FF1 Center console with storage compartment, W70 Tinted glass in the rear, black, EL9 2-way speakers, front. We are available by phone Monday to Friday until 8:00 p.m. and Saturday until 4:00 p.m.! Further:!! Fpedszr Ikxjpfx Aatsl Leasing/financing and trade-in possible! !! !! - Errors and prior sale are subject to change! - All information is without guarantee... more on our homepage.

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Fpjdpfxoxnlfls Aatsl

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r19,5, tire condition: 100 %, Further information: Fine-grained steel welded construction, drawbar with 2 replaceable kingpins, 14 pairs of lashing eyes recessed in the outer frame, each with a capacity of 2.5 tons, outer frame with Load-Lock profile for attaching lashing straps. Note: Not suitable for use with sideboards! 24-ton, two-stage support winch, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation. 2-stage extension ladder at the rear, door retainer on the side, chocks with holder, aluminum side impact protection, galvanized steel underrun protection, partial wheel arches in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, spare wheel holder for 1 spare wheel, with wheel fastening kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, vehicle stability system, tire pressure monitoring system TPMS Haldex, in conjunction with the info center. 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole tamper-proof sockets at the front, without connecting cable, LED safelight, at the top in corner posts at the rear. Floor: Sieve-printed panels approx. 30 mm thick, cross members with omega inserts, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,600 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side rails: 5 pieces of sliding rails that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket (3 x on the right side and 2 x on the left side), 5 pieces of rail positions (3 x on the right side and 2 x on the left side), aluminum insertion strips. Corner posts at the rear: steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-wing with 2 internal rotary latch locks each. Tarpaulin with welded-in horizontal and vertical straps, reinforcements for side rails. Quick Lock system for side tarpaulin with central lock, on one side on the left, tensioning devices made of stainless steel on the right, tarpaulin with recessed vertical slats as a load securing tarpaulin, on one side on the left (then only 2 pairs of side rails on the left). Fedpfxskyrlze Aatspl Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with the tarpaulin sliding from the back to the front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, liftable roof, mechanically liftable by approx. 380 mm, liftable roof for opening with the doors closed. Country of registration: Germany, type approval according to EG 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, refl

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Fpsdjfi Nmpspfx Aatsl Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: used, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2015, next inspection (TÜV): 04/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 223,613 km Body interior / exterior: * Sliding curtain on left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated outer frame (Multilock) * Pallet stops on left and right * Screen-printed floor for 7,100 kg forklift axle load * 23 aluminum insert slats * 3 pairs of sliding rings, adjustable Fedpfsym H I Hsx Aatspl * Rear portal doors with double locks * Access ladder * Storage box * Reversing lights * Rear fog lamp Chassis / other equipment: BPW Eco Plus axles * Air suspension * Raise and lower function * ABS, EBS * 385/65 R 22.5 tires * Remaining tread approx. 5 - 15 mm ---- Non-binding offer from Bocholt location. Subject to prior sale and errors. Sale only to traders or for export.

Condition: excellent (used), CATALOGUE NUMBER 8005 TECHNICAL SPECIFICATIONS - Number of spindles: 21 pcs - Distance between the outermost spindles: 640 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 870x560 mm - Height to the table surface: 900 mm Fpedpozr U Ecofx Aatjl - Stroke of the feed cylinder: 65 mm - Vertical/horizontal and angled drilling adjustment - Drilling head adjustment, pneumatic - Main motor: 1.5 kW - Dimensions (L/W/H): 1000x1150x1240 mm - Weight: 370 kg ADVANTAGES – 21 spindles – drill bit mounting with quick-release fittings – Vertical, horizontal, and angled drilling – Unpainted – Used drilling machine, very good condition Net price: 7900 PLN Net price: 1880 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, mileage: 20,498 km, power: 177 kW (240.65 HP), first registration: 05/1998, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,480 mm, loading space length: 3,700 mm, loading space height: 1,750 mm, Year of construction: 1998, total length: 7,250 mm, total width: 2,500 mm, total height: 3,050 mm, Equipment: ABS, all wheel drive, parking heater, Water tank, GRP, 2340 liters +++ Quick-release coupling at the rear right with spray nozzle 6-cylinder in-line diesel engine with turbocharger and intercooler, 5-speed manual transmission 4x4 all-wheel drive, switchable with off-road reduction 2x differential locks: center + rear (rear axle + transfer case) 1x auxiliary drive for mounting a pump at the rear FP16/8 Tire chains on the rear axle Very well-maintained tank fire engine TLF 16/25, superstructure by Ziegler Pump Ziegler 16/8 Automatic transmission (shifts smoothly and without jerks), ABS 6 seats registered, 2 prepared for self-contained breathing apparatus (SCBA) wearers Fsdpfszy Td Tox Aatjpl Maximum permissible total weight: 12,000 kg according to documents Superstructure dimensions, external: 3700x2480x1750 (LxWxH in mm) Internal dimensions of the cab at the rear (from the driver's seat): 1700x2000x1540 (LxWxH in mm) Wheelbase: 3640 mm Tires 10 Rx22.5 Maximum speed: 93 km/h (according to documents) The vehicle runs well and is immediately ready for use. Technical inspection carried out, including lubrication, replacement of the air dryer cartridge, and cleaning of the diesel tank. All fuel lines have been renewed, and the V-belt has been tightened. +++ Errors, changes, and prior sale reserved +++ €125

Condition: new, sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm down holder 1 Stück fence Tisch 80 - 480 mm Fpsdpfx Asxabdhoatol fence Breiten 0 - 600 mm table-size 1300 x 600 mm work height max. 760 mm total power requirement manuell kW weight of the machine ca. 413 kg. range L-W-H 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP CNC total power requirement 2.6 / 3.5 kW weight of the machine ca. 605 kg range L-W-H 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Fsdpfxoxaa Uxs Aatopl * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, cutting diameter 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm Fsdpjxabbgsfx Aatjpl capacity 45 degrees: round 150 mm capacity 45 degrees: square 150 x 150 mm capacity 45 degrees: flat 150 x 210 mm capacity 60 degrees: round 90,0 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: flat 90 x 100 mm dimensions of saw-band 2455 x 27 x 0,9 mm cutting speed 35 + 70 m/min work height max. ca. 900 mm total power requirement 1,2 kW weight 240 kg range L-W-H 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) * for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating instructions BERG SCHMID Auto-Cut system = 3-stage system 1. automatic lowering & automatic saw cut 2. manual operation - lowering + saw cut 3. high-speed lowering of the saw frame - without saw cut