Used Rottstedt R125 P for sale (40,453)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm With bushes, see photos With 1 piece square pin Nsdpfxoy Awzkj Ab Ujdb HS-Code: 8462 5900

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,896 h, load capacity: 4,800 kg, lifting height: 4,670 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, battery capacity: 805 Ah, battery voltage: 80 V, fork length: 1,600 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 250-15, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 7,090 kg, total height: 2,400 mm, total length: 2,930 mm, total width: 1,500 mm, fuel: electricity, Equipment: cabin, sideshift, LINDE E 48 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.800 kg Lifting height: 4.670 mm Closed height: 2.400 mm Free lift: 1.620 mm Mast: Triplex (3F467) Fork length: 1.600 mm Fork carriage: 3 Ndsdsz Ap Dhepfx Ab Usb Drive: Elektro 80V Battery: 80 V / 805 ah. Charger: Dreiphasig 80 V Tyres: Superelastik SE 250-15 (70%) / 21x8-9 (50%) Service weight: 7.090 kg Length: 2.930 mm Width: 1.500 mm Year of manufacture: 2007 Operating hours: 7.896 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309297 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2022, operating hours: 15,000 h, functionality: fully functional, overall weight: 2,020 kg, power: 90 kW (122.37 HP), volume flow: 960 m³/h, operating pressure: 8 bar, pressure (max.): 8 bar, Equipment: documentation/manual, type plate available, We offer this used Hertz FRECON 90 P screw compressor, manufactured in 2022. Pressure: 8 bar Capacity: 16 m³/min Rated power: 90 kW Weight: 2020 kg Nedpfx Asz Abb Eeb Uodb Voltage: 400 V Frequency: 50 Hz Maximum shaft speed: 2340 min⁻¹ Date of manufacture: 04/2022 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: new, Year of construction: 2009, operating hours: 69 h, functionality: fully functional, Mediseal / Körber P-1500 Cartoning Machine for Vials and Eye Drop Bottles – Year of Manufacture: 2009 For sale: a high-quality, intermittently operating, horizontal cartoning machine of the type Mediseal (Klöckner) P-1500, designed for pharmaceutical applications. The machine is suitable for both vials and eye drop bottles as well as comparable primary packaging formats. The system was purchased as new but has never been used in production. Only FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) were performed. With just 69 operating hours, the machine is in virtually as-new condition. Technical Description • Max. output: up to 150 cartons per minute • Operating mode: intermittent, horizontal • Product infeed via magazine, starwheel, and product chain • Automatic erecting of folding cartons using vacuum grippers • Automatic insertion of products and package leaflets • Fully automatic leaflet feeder (RonTech) • Progressive carton closing, outfeed to the right • Option for color code embossing on carton flaps Carton Size Range • Length (C): 65 – 150 mm • Width (A): 35 – 90 mm • Height (B): 15 – 95 mm Formats / Flexibility • Currently equipped with format parts for 5 ml, 10 ml, and 15 ml eye drop bottles • Includes all necessary format and change parts • Highly flexible machine, suitable for additional bottle, vial, and product formats • Fast and reproducible format changes Features • Operation via touchscreen (all controls at eye level) • Operating manual in German and French Machine Data • Manufacturer: Mediseal, Körber (formerly Klöckner), Germany • Model: P-1500 • Machine No.: 43 • Year of manufacture: 2009 • Electrical connection: 220/400 V, 3 Ph, 50 Hz • Required space: approx. 6,250 × 2,800 × 2,200 mm • Weight: approx. 3,500 kg Condition Nsdpfox Nx Daox Ab Uedb • Unused, virtually as new • Never put into production • Only FAT and SAT performed • Only 69 documented operating hours Original price in 2009 • approx. €700,000 - €750,000 with one format set Videos showing machine in operation available Price On request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 11,558 h, load capacity: 1,600 kg, lifting height: 3,960 mm, free lift: 1,820 mm, fuel type: electric, mast type: duplex, construction height: 2,460 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,200 kg, total height: 2,460 mm, total length: 2,100 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.960 mm Closed height: 2.460 mm Free lift: 1.820 mm Mast: Duplex (2F396) Fork length: 1.200 mm Fork carriage: FEM 2B Drive: Elektro Battery: 48 V/625 Ah (2016) Charger: ohne/without Tyres: Superelastik 18x7-8 (40 %) / 16x6-8 (50 %) Service weight: 3.200 kg Length: 2.100 mm Width: 1.100 mm Year of manufacture: 2006 Operating hours: 11.558 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Half cabin ATTACHMENTS Sideshift Ndodpoz Apqnsfx Ab Ueb Internal no.: 1308826 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07-02461, measuring range X-axis: 250 mm, measuring range Z-axis: 310 mm, total width: 390 mm, total length: 430 mm, total height: 805 mm, input voltage: 230 V, overall weight: 80 kg, input frequency: 50 Hz, For sale is a tool presetting machine from the Swiss quality brand PWB Swiss. The machine is in used condition, but the optics and measuring electronics are functional. Extensive VDI accessory package included: The machine is sold with a used set of reduction adapters (ideal for CNC turning operations): 1x VDI 30 holder 2x VDI 20 holder (in two different heights) 1x VDI 16 holder Technical data: Measuring range X-axis (longitudinal travel): 250 mm Measuring range Z-axis (vertical travel): 310 mm Base spindle mount: SK 40 Weight: approx. 80 kg Important notes regarding the sale: A test report or printed manual is no longer available. The machine is sold in its current condition, as viewed (uncleaned). An on-site inspection while the machine is powered on is highly recommended. Sales conditions: Njdpfx Abozy Uqho Uedb Price: €1,850 (negotiable, plus VAT) Invoice: A proper invoice with VAT will be issued. Shipping: Self-collection only. Assistance can be provided with loading.

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Nsdpfx Abjzktg Aj Uedb Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: used, Year of construction: 1991, functionality: fully functional, Heidelberg MOZP (1991) – 2-Color Offset Printing Press with Perfecting (1/1 or 2/0) Short Technical Description / Summary High-performance 2-color sheetfed offset press Heidelberg MOZP, year 1991. Features an integrated perfecting unit (P) allowing dual capability: printing 2/0 (two colors on one side) or 1/1 (one color on both sides in a single pass). Renowned for exceptional registration accuracy, high durability, and consistent print quality. Ndjdpfx Aozur E Sob Ueb Key Technical Specifications Manufacturer: Heidelberger Druckmaschinen AG Model: MOZP (P = Perfecting / Свртувач) Year of Manufacture: 1991 Serial Number (Masch. Nr.): 612 123 Country of Origin: Germany Number of Printing Units: 2 colors Max. Sheet Size: 480 x 650 mm (18.9" x 25.6") Min. Sheet Size: 140 x 185 mm Max. Printing Speed: Up to 10,000 sheets/hour Plate Size: 525 x 650 mm Weight: approx. 5,200 kg Features & Equipment CPC 1-01 / CPC Control Desk: Centralized remote ink and register control console. Perfecting Unit (1/1 or 2/0): Quick convertible unit for straight printing or perfecting options. Alcolor / Standard Dampening System: Continuous dampening system for fast ink-water balance. Powder Sprayer: Integrated anti-setoff powder spray device. Quick-action plate clamps for fast job changeover. Standard stream feeder and high-pile delivery. Condition & Availability Condition: Used, clean, visually very good, well-maintained in a professional printing environment.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Ndsdpfx Aszww R Seb Ujb

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1011/33, High-quality pharmaceutical laboratory centrifuge HEINKEL V 500 TP – complete system including control unit and accessories For sale is a professional, vertical pilot plant centrifuge, type HEINKEL V 500 TP, in excellent, like-new condition. The system is specifically designed for feasibility studies, product development, and small-scale production in the pharmaceutical and fine chemical industries and meets the highest cGMP standards. This is a complete system ready for immediate use, including the original control cabinet and integrated operating unit (HMI). Thanks to the mobile stainless steel frame (“Plug and Use”), the system can be moved flexibly around the room or integrated into existing processes. Technical data & highlights: Manufacturer: HEINKEL Drying and Separation Group Njdpfx Abez Euz Ij Uodb Model: V 500 TP (Vertical Centrifuge) Year of construction: 2021 / 2022 Drum diameter: 500 mm Nominal volume / filling weight: 30 liters / approx. 36–38 kg Material: High-quality stainless steel (product-contact parts with high surface quality, Ra < 0.8 µm) [If applicable, add "Alloy C22 / Hastelloy" here] Approval: CE marking present Documentation: Complete technical documentation Scope of delivery: HEINKEL V 500 TP centrifuge on a mobile stainless steel frame Original, free-standing control cabinet (including cooling unit) Integrated operating panel (touch-HMI) directly on the machine Original HEINKEL accessories and tool kit

Condition: used, Year of construction: 2013, machine/vehicle number: 0602-260025, The MicroStep MasterCut Compact P 6001.20 is a compact and powerful CNC plasma cutting system designed for the precise processing of sheet metal on a work surface measuring up to 6,000 × 2,000 mm. The gantry-style system is equipped with a Kjellberg HiFocus 161i fine plasma torch, an automatic gas console, and Contour Cut Speed technology. Maximum positioning speed of 35,000 mm/min. Nsdpjzq E A Aofx Ab Ujdb

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Njdpfxoxta U Ee Ab Usdb Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: good (used), functionality: fully functional, mileage: 3,31,000 km, power: 2,35,359.88 kW (3,20,000.00 HP), first registration: 06/2016, fuel type: diesel, maximum load weight: 8,100 kg, overall weight: 18,000 kg, tire size: 315//70R22.5, axle configuration: 6x4, wheelbase: 5,670 mm, next inspection (TÜV): 01/2026, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,260 mm, Year of construction: 2016, operation weight: 18,000 kg, Equipment: ABS, air conditioning, car registration, cooling unit, low noise, onboard computer, tail-lift, traction control, IVECO NEW EUROCARGO ML180E32P – CHASSIS ZCFA71TN702654777 Year 06/2016 - EURO 6 6-cylinder engine - Tector 7 with SCR - 6728 cc - 320 HP - Km 331,817 Automated \ sequential ZF 6-speed gearbox Body: white color IC194. Nsdovwiq Iepfx Ab Uedb Tyres: Size 315/70 R22.5 STRUCTURE: Wheelbase 5,670 mm - GVW 180 Q.li – P. Utile 81.10 Q.li - Short cabin ML MY2015 – Susp. pneumatic rear TRUCK EQUIPMENT: Tector 7 Engine With Scr - 6728 Cc - 6 Cylinders Common Rail – 250 HP 6-Speed Gearbox, Air Conditioning, Euro 6, Pneumatic Rear Suspension, Abs, Cruise Control, Brake Engine With Retarder Function, Immobilizer, Power Steering, Short Cab Mlc-My 2015 Low Roof, Electric Windows, 280 Lt Fuel Tank, Led Drl Daytime Lights, Pneumatic Driver Seat, Electric And Heated Rear View Mirrors EQUIPMENT: ISOTHERMAL VAN - Brand: SCHUH – Internal useful dimensions approx. 7.76 * 2.50 h 2.25 02 rear doors, Internal dividing bulkhead REFRIGERATOR UNIT - Model: CARRIER 1150 – Matr. GC612068 – YEAR 2016 SWING TAIL LIFT Brand: DAUTEL - Matr. 462335-004 – Year 2016 - Lifting capacity 20 Q.li ATP FRC – EXP. 12/2030 Documents: Nationalized – Approval certificate

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI mit SmartNC, table width: 500 mm, table length: 900 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale is a very well-maintained vertical CNC machining center, Quaser MV 154 P, manufactured in 05/2015, with initial commissioning in 09/2016. The machine is in very good technical condition and fully functional. A particular advantage is the recently renewed main spindle, which has only approximately 10 operating hours – the spindle is practically as new. An inspection while the machine is powered on is possible by prior arrangement. TECHNICAL DATA Control: - Heidenhain iTNC 530 HSCI with SmartNC Travel distances: - X-axis: 760 mm - Y-axis: 530 mm - Z-axis: 560 mm - Rapid traverse: 40 m/min Main spindle: - Maximum speed: 12,000 rpm - Maximum power: 25 kW Tool magazine and work table: - Tool magazine: 30 positions - Table size: 900 × 500 mm EQUIPMENT - Chip conveyor - Inclined bed filter system - Zero-point clamping system - 4th axis Rotamatik 120 - Blum measuring probe RENEWED COMPONENTS - Main spindle renewed, operating time only approx. 10 hours - Motor newly re-bearinged - Ball screw of the X-axis renewed - Däublin unit renewed The machine can be inspected and demonstrated at our location in 78132 Hornberg by arrangement. Ndedsibat Iopfx Ab Ueb For questions, further technical information, or to arrange an inspection, Arnd Sauter GmbH is always at your service. Price: 55,000 EUR net, ex works. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 2329200, functionality: fully functional, operating hours: 33,674 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 11,000 kg, table length: 700 mm, table width: 900 mm, spindle speed (max.): 16,000 rpm, table load: 800 kg, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 80 P duoBLOCK, year of manufacture: 2006, operating hours (h): 33,674, serial no.: 2329200, travel (X/Y/Z): 800/800/800 mm, max. spindle speed 16,000 rpm, HSK 63 tool holder, HEIDENHAIN Mill Plus IT control, G7 function, internal coolant supply, 60-position tool changer, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Nodpforkz Rgex Ab Ujdb

Condition: ready for operation (used), Year of construction: 1999, Vertical machining center / EUMACH MC 1050 P - Heidenhain 426 Ndjdpfx Aezmqigsb Uob -CE marking -Heidenhain 426 control system -Oil cooler -COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTOS -Complete documentation Dimensions: L x W x H 2.8 x 3.45 x 2.8 meters / Weight: 6500 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2015, operating hours: 9,500 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total length: 2,080 mm, total width: 1,990 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 40,000 rpm, total height: 2,000 mm, rapid traverse X-axis: 44 m/min, rapid traverse Y-axis: 44 m/min, rapid traverse Z-axis: 44 m/min, overall weight: 2,100 kg, spindle motor power: 3,000 W, We are selling our Datron M10 Pro with HSC control. The machine is in excellent condition, still in use, and can therefore be inspected while powered on. We are gradually replacing our machine park, which is why we are offering this machine for sale. Njdpfx Ajz Epwkjb Ujdb It has seen very little use, as it was primarily used to machine brass with a cutter diameter of 3mm. Maintenance has been carried out at regular intervals. The spindle is 2 years old and has only 1,500 hours of operation. Delivery terms: ex works, transport insurance only, no warranty. Subject to errors in the technical data.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11598-A, overall weight: 3,900 kg, input frequency: 50 Hz, input voltage: 380 V, We are offering this used TAYME P-60 debarker, year of manufacture 2011. Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Machine type: Log debarker / Peeling machine Year of manufacture: 2011 Serial number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with toothed knives Maximum pressure – 400 bar 2. Electrical Specifications Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Maximum pressure – 400 bar System type – Stand-alone hydraulic unit with tank and three-phase motor 4. Main Function Industrial machine designed for: - Debarking logs of various diameters - Preparing wood for pallets, packaging, chipping, or primary processing - Peeling through toothed heads and hydraulic pressure Ndedoycutcjpfx Ab Ueb The machine is located in Valencia, Spain, and is ready for loading and shipping worldwide. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2007, operating hours: 690 h, functionality: fully functional, machine/vehicle number: F-87459, input voltage: 400 V, type of input current: three-phase, This robot is a 'lazy dog'. Despite its age, it has just 70 hours of operating time. It served as a test robot and was not actually used in production. Nevertheless, it has received regular maintenance from Fanuc. Its condition is almost as new. It can be mounted on the floor, wall, or ceiling. The machine has been inspected and has undergone a trial run. If interested, the robot can be viewed at our facility. Delivery and initial commissioning are also possible. Ndedpfew Tl S Dox Ab Ujb

Year of construction: 2016, condition: used, functionality: fully functional, Radial riveting machine KARDEŞLER Ndsdpjywygxjfx Ab Uob

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Machine was used in the production of ventilation ducts and fittings. AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components). Nedpow I D Iaefx Ab Uodb

Condition: excellent (used), Year of construction: 1998, operating hours: 6,10,00,000 h, functionality: fully functional, machine/vehicle number: 201810, color channels: 2, paper weight (min.): 50 g/m², paper weight (max.): 280 g/m², paper width (min.): 520 mm, total length: 290 mm, total width: 190 mm, total height: 170 mm, space requirement width: 300 mm, space requirement height: 220 mm, counter reading (black): 6,10,00,000, counter reading (color): 6,10,00,000, year of last overhaul: 2025, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Heidelberg Speedmaster SM 52-2-P offset printing press for sale, manufactured in 1998, currently in daily production and available for inspection and live demonstration. Configuration * 2 printing units + perfecting device (1/1 or 2/0) * Maximum sheet size: 370 × 520 mm * Total impressions: 60,956,393 * AutoPlate semi-automatic plate changing system * Heidelberg Alcolor dampening system * Technotrans refrigeration unit for the dampening solution * Continuous feeder * Electronic side lays * CP Tronic control console * Automatic ink key presetting from the CP Tronic console Nedpfxezrr U Ue Ab Uedb * FullWash automatic washing system for the plate cylinders and ink rollers (blanket washing unit not installed) * Replaced cylinders Technical Condition * The press is currently in daily production and can be inspected while running. * Original Heidelberg ink and dampening rollers were replaced approximately 2 years ago (invoice available). * The machine runs perfectly and produces commercial print jobs every day. * Sold complete with a Plate Punch & Bender. Automatic Washing Systems The press is equipped with automatic washing systems for: * Impression and transfer cylinders; * Ink rollers. The blanket washing units are not installed. Documentation * Original purchase invoice available. * Original Heidelberg manuals and tools. * Original electrical diagrams. Terms of Sale * VAT invoice will be issued. * Dismantling, loading and transportation are the buyer’s responsibility. Ideal for Printing * Flyers * Brochures * Business cards * Folders * Forms * Labels * Commercial print jobs * High-quality promotional materials This press is an excellent choice for print shops looking for a reliable Heidelberg offset press with low operating and maintenance costs. Price €17,500 (VAT included).

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. Nodpfx Ajtu H Aveb Usdb We would bring the device to us from Frankfurt.

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Ndjdpfx Abjy Iwy De Uob Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Optimized saw blade extension PC operator interface in English

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station Njdpjzx Eftefx Ab Usdb - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.