Used Rudolph Technologies / Onto Innovation Inline Wafer Inspection Tool for sale (72,831)

Condition: excellent (used), Year of construction: 2016, overall weight: 420 kg, tool diameter: 420 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, ZOLLER venturion 450 – CNC setting and measuring device, year of manufacture 2016, very little use The machine was purchased by the previous owner as an additional device and was practically not used; it was sold because it is no longer needed. Accordingly, the usage is very low – the machine is in new condition and fully functional. It is located in Velten and can be inspected while powered on by arrangement. THE ADVANTAGES - Very little use, new condition, last ZOLLER maintenance 12/2022 - CNC drives in X, Z and C: Cutting edge is automatically approached, focused and measured – independent of the operator, even with multi-cutting tools Lrjdpfx Ako Advkzomou - Non-contact optics with transmitted and incident light: Contour, breakouts, wear and corner radius are detected - pilot 3.0: automatic cutting edge detection, zero point monitoring, tool and adapter management, test protocol, data transfer to the machines - Immediately ready for use with control unit, label printer and adapters SK 40 / VDI 40 / VDI 50 TECHNICAL DATA - Measuring range Z 450 mm · X radius 210 mm (tool Ø up to 420 mm) · Internal jaw depth Ø 100 mm - max. tool weight 50 kg - 100–240 V~, 50/60 Hz, 1 kVA · Compressed air 6–8 bar - W × D × H 2500 × 810 × 1710 mm · Weight 350 kg + control unit approx. 80 kg EQUIPMENT ACCORDING TO FACTORY EQUIPMENT LIST ZOLLER (05/13/2016) 1. Z05MK446.11 USB camera with optics and integrated LED incident light 2. Z05E6187 Transmitted light "pilot" "DLR" / V-series 3. Z05E6127.11 USB camera with optics and integrated LED incident light 4. V429530-01 HGV-ACE mounting assembly vent. 450+600 5. V429515 Accessory kit for drive and ROD "venturion 450/600" 6. N001831 Drive unit linear CNC/"usbmotion" 7. N001831 Drive unit linear CNC/"usbmotion" 8. N001918 Drive unit rotary CNC/"usbmotion" 9. Z05E6024 Foil keyboard "smart-size" for electronics-Z80 10. Z05E7026-01 USB motion controller 11. Z05E6038-00 Valve module Z100-V 12. Z05E6037-20 24V voltage distribution with fuses 13. Z05E6035-10 Lighting module Z100-L 14. Z9700910-36 ZOLLER measuring device control 11th generation panel PC 24" 2980U 15. Z9734883-01 Printer for TH labels, print width 25–108 mm 16. Z9734883-02 Power supply 24V DC 2.5A 60W, 100–240V AC 50/60Hz ADDITIONALLY INCLUDED - Adapters SK 40, VDI 40 and VDI 50 - Control unit on stand with monitor, keyboard and mouse - Software ZOLLER pilot 3.0 - Cables and small parts as shown in the photos Tools and tool holders are not included in the scope of delivery. SERVICE By arrangement: Installation and commissioning · Training · Demonstration under power in Velten · Transport. TRANSACTION Location 16727 Velten near Berlin · FCA Velten incl. loading · 100% prepayment · Delivery 1–2 working days after payment receipt. Data sheet as PDF attached. Technical data according to nameplate, operating manual and factory equipment list (information, not a guarantee of quality according to §§ 434, 443 BGB). Errors and prior sale excepted.

Condition: used, Year of construction: 2003, Pneumatic Tool Manufacturer: BAND-IT Type: S750 Air Tool Year of manufacture: 2003 This foot-operated standard pneumatic tool applies the full range of BAND-IT Junior and Junior Smooth pre-formed clamps. Technical specifications: - Adjustable air regulator and pressure gauge ensure consistent tool performance. - Foot pedal provides better control over clamp placement. - Installs 5 clamp widths with smooth inside diameters ranging from 1/4" to 3/4". - Tool features: ergonomic design, automatic tensioning. - Manual cut-off handle, permanent locking mechanism. - Can be integrated into production systems. Lrsdpfx Aksw S Nk Ujmsu - 100–125 psi line pressure. Equipment & Accessories: - Operating manual in English included In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm - Y-axis travel: 315 mm - Z-axis travel: 400 mm - Spindle speed: 3,150 rpm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Ljdpfxjzz S Rnj Akmsru Subject to technical changes, errors, and prior sale.

Condition: used, x-travel:600 mm y-travel:400 mm z-travel:640 mm turning speeds:30 - 1800 U/min table surface area:880 X 495 mm total power requirement:4 kW Ledpe Ad Shiefx Akmsru weight of the machine ca.:2 t dimensions of the machine ca.:2,2 x 1,8 x 2,1 m

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t dimensions of the machine ca.:1,75 x 1,80 x 2,10 m Lrsdo Ad Si Tjpfx Akmou

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Lsdpezrx Ihofx Akmsru Technical data: - Tool shank: 35 mm - Clamping length: 65 mm

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software Lodpfxezii Dhe Akmsru enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: ready for operation (used), Montronix TS100 Tool Monitor, serial number: T1000022A0964, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lodpfx Akji Eb R Asmjru

Condition: used, Year of construction: 2022, total length: 2,000 mm, lifting height: 5,700 mm, load capacity: 1,600 kg, · Bedienung Geh/Stand · Nenntragfähigkeit 1600 (2000)kg · Lastschwerpunktabstand 600 mm · Lastabstand 724/646 mm · Achslast mit Last antriebsseitig/lastseitig 979/1850 kg · Achslast ohne Last antriebsseitig/lastseitig 962/268 kg · Bereifung Polyurethan · Reifengröße antriebsseitig mm ⌀ 230 x 90 · Reifengröße lastseitig mm ⌀ 85 x 85 (⌀ 85 x 60) · Stützrollengröße mm ⌀ 150 x 50 · Spurweite antriebsseitig/lastseitig 534// 380/500 mm Lredpfjxtq E Ijx Akmju · Höhe Deichselgriff in Fahrstellung min./max. 1175/1380 · mm · Gabelhöhe gesenkt mm 86 · Arbeitsgangbreite bei Palette 800 x 1200 längs 2390 / · 2777 mm · Wenderadius 1507/1894 mm · Fahrgeschwindigkeit mit/ohne Last km/h 4,0/4,0 6,0/6,0 8,0/10,0 · Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 · Senkgeschwindigkeit mit/ohne Last m/s 0,40/0,35 · Max. Steigfähigkeit kB 5 mit/ohne Last %: 10,0/22,0 · Betriebsbremse Elektromagnetisch · Fahrmotor, Leistung S2 = 60 min kW 2,3 · Hubmotor, Leistung bei S3 = 15 % kW 3,2 · Batterie nach DIN 43531/35/36 A, B, C, nein 2PzS · Batteriespannung/Nennkapazität K V/Ah 24/230 · Li-Ion: 24/205 · Batteriegewicht ±5 % (herstellerabhängig) kg 212 · Energieverbrauch nach DIN EN 16796 kWh/h 0,84 · Art der Fahrsteuerung AC-Steuerung · Schalldruckpegel (Fahrerohr) dB(A) ≤66

Condition: used, Year of construction: 2015, total length: 2,080 mm, lifting height: 4,470 mm, load capacity: 2,000 kg, - Antrieb (Elektro, Diesel, Benzin, Treibgas, Netzelektro) Elektro - Lenkung (Deichsel, Geh-, Stand-, Sitzlenkung, zwangsgesteuert) Deichsel - Tragfähigkeit/Last t 2,0 - Lastschwerpunktabstand mm 600 - Lastabstand von Mitte Vorderachse mit ausgefahrenen Gabeln x mm 685 - Radstand mm 1323 - Achslast mit Last (vorn/hinten) kg 941/2298 - Achslast ohne Last (vorn/hinten) kg 840/422 - Spurweite, vorn mm 574 - Spurweite, hinten mm 380 - Höhe Deichsel in Fahrstellung (min/max) mm 762/1232 Lrjdpfxjynbrvs Akmou - Arbeitsgangbreite bei Palette 1000 x 1200 quer 2463 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 2438 - Wenderadius mm 1585 - Fahrgeschwindigkeit (mit/ohne Last) km/h 5/6 - Hubgeschwindigkeit (mit/ohne Last) m/s 0,10/0,17 - Senkgeschwindigkeit (mit/ohne Last) m/s 0,30/0,23 - Betriebsbremse elektromagnetisch - Batteriespannung, Nennkapazität V/Ah 24/315 (375) - Art der Fahrsteuerung elektronisch - Schallpegel, Fahrerohr dB (A) < 70 - Lastschutzgitter

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, Machine with Erosion function. Upon request, machine can be restored at additional price. Lredpfxjzvwfmj Akmju

Condition: excellent (used), Saws and tools washing machine Rotatherm Lrjdpjznm Tdjfx Akmeu

Condition: used, Technical details: max. temperature: 150° Grad Lrjdpju N Ag Refx Akmeu voltage: 380 Volt V / Hz current- max.: 6,5 A weight: 65 kg dimensions L x W x H: 0,68 x 0,22 x 0,58 m Working Area / Application: water tempering system transportable - connection coolant water: inlet and outlet Ø 12mm internal with bayonet connection - connection circulating medium: inlet and outlet Ø 12mm with bayonet connection - control via control panel equipment: - 1400mm connection cable Optional test run possible. *

Condition: used, Technical details: x-travel: 130 mm y-travel: - mm Lrsdpfxsu N Apfe Akmsu z-travel: 140 mm machine weight approx.: 107 kg dimensions L x W x H: 0,72 x 0,33 x 0,63 m Concentricity Gauge Device and Presetting Device (table device) - application: measuring device for production components (helical tooth gears), testing and adjusting of milling tools Characteristics: - longitudinal axis approx. 100 mm, Ø 280 mm - tool slides: turning range 360 °, tool holder Ø 30 x 80 mm, size LxW: 200x175 mm, with measuring device measuring rod Ø 8 x 400 mm adjustable - vertical slide: pin gage Ø 20 x 80 mm *

Condition: used, Year of construction: 2011, Technical details: measuring range X-axis: Länge: 0 - 160 mm measuring range Y-axis: Höhe: 0 - 425 mm Tool table: Auflage: Ø 95 mm Lrodpju N Artefx Akmou tool taper: SK 50 tool taper: drehbar 360° weight: 12 kg dimension L-W-H: 420 x 165 x 775 mm This is a bench top unit. Application: Alignment of rotary milling tools. Measuring method: manual alignment with/via digital display Measuring bar manually movable Measuring beam transverse (X) 160mm and vertical (Y) 425mm movable with measuring sensor Measuring display: both axes digital, voltage 1.5 V (AA battery) *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Lsdou Ng Npjpfx Akmsru Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Technical details: grinding length: - mm centre height over plate: - mm long. travel of table: 250 mm cross travel of table: 160 mm grinding spindle - swivable: ja ° adjustment of spindle-head: 160 mm grinding wheel speeds: 2850 U/min grinding diameter: 150 mm work table:: 50 x 134 x 44 mm table movement: X= 260 mm table movement: Y= 160 mm dimensions of grinding wheel: Bohrung Ø 20 mm voltage: 380 V / Hz machine weight approx.: 113 kg dimension machine approx.LxWxH: 0,63 x 0,56 x 0,64 m Grinding machine for twist drill cutting angle 30° / 40° Lsdpeu Ng N Aofx Akmjru Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 100mm for clearance angle 40° and 90°, 3x clamping devices, prism 14mm, as well as test device with 12mm prism and magnifying glass 90mm adjustable Column rotatable 360° Grinding protection 2x 220V sockets *

Condition: like new (used), Tool and cutter grinder GRIFO model U10 Lrsdsinbilspfx Akmsu

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Lrjdpjzrh D Sefx Akmeu Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Condition: used, Height: 950 mm Roller length: 3150 mm Overall length: 3450 mm Discharge width: 500 mm Working width: 100 mm + 700 mm + 100 mm Lrjdpfsy Tg S Hsx Akmju The machine is in good working order and ready for use. The rollers are made of aluminum, the rest of the machine is made of stainless steel. Please check my other listings.

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Lrjdpsw Emf Dofx Akmou Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm Lrsdem Uygvjpfx Akmju 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Powered tools, VDI 50 standard RÖHM 14.9934.0550-00, No. 5601 Lsdsz Ea Nkepfx Akmjru RÖHM 14.9934.0551-00, No. 5740 and various other models available Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Electric, handheld nibbler TruTool PN 200 Product features The new TruTool PN 200 oscillating shear is primarily used for cutting C-L-U profiles, trapezoidal sheet metal, and other similar elements. The device features a short tool for processing sheet metal with a profile depth of up to 85 mm, as well as C-L-U profiles. Also suitable for corrugated sheets. Ideal for hard-to-reach places. The working direction can be easily adjusted by 360° in 45-degree increments without the need for tools. Minimum changeover time: Punch and die can be replaced quickly and easily, without interruptions and without tools. Unmatched speed: Fast and efficient, 2.1 meters per minute for structural steel with a strength of 400 N/mm². Applications: Lredpsz Sb Hmjfx Akmsu Trapezoidal sheet metal For cutting profiles with a depth of up to 86 mm and a width of 132.5 / 40 mm. For straight and angled cuts. Profiles For cutting C-L-U profiles. Corrugated sheet metal For trimming and cutting. For angled cuts, as well as internal and radial cutouts. • MAXIMUM SHEET THICKNESS: • MAXIMUM SHEET THICKNESS FOR STEEL 400 N/MM²: 2 mm • MAXIMUM SHEET THICKNESS FOR STEEL 600 N/MM²: 1.5 mm • MAXIMUM SHEET THICKNESS FOR STEEL 800 N/MM²: 1 mm • MAXIMUM SHEET THICKNESS FOR ALUMINUM UP TO 250 N/MM²: 3 mm • RADIUS: • SMALLEST RADIUS: 50 mm • GENERAL INFORMATION: • WORKING SPEED: 2.1 m/min • NUMBER OF STROKES AT NOMINAL LOAD: 1500 1/min • STARTING HOLE DIAMETER: 24 mm • RATED POWER INPUT: 550 W

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed Lredpfjz Sliljx Akmsu • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.