Tool presetter

WMW

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Nwsdpj Afxqvefx Airon Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC640, table width: 800 mm, table length: 2,700 mm, rotary table diameter: 700 mm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DEMONSTRATION MACHINE This 5-axis machining center enables the complete machining of long components without the need for re-clamping. It is designed to ensure a high degree of dynamics and speed, despite its high stability and rigidity. The cross slide, traveling column, and bed are made of a steel/welded construction. The large tool magazine, connected to the column, ensures short tool change times. The machining center, "made in Italy," is equipped exclusively with European quality components. Nwodpfsz D Erujx Airon Special equipment for the demonstration machine: Kessler milling spindle SK40, 60-position tool magazine, air through the spindle, flushing gun for cleaning the work area (including its own pump), Heidenhain TS460 wireless measuring probe (workpiece measurement), BLUM laser tool measurement, Heidenhain automatic kinematic control, rotating control panel, 25 bar internal coolant system, interface for KNOLL filter system, oil mist extraction Available for immediate delivery. While supplies last.

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, bale length: 2,330 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Nedpfe Afxcisx Airswn Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, straightening roller diameter: 290 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm Njdpfx Aie Afxb Ejrown max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1975, Pressure: 250 t Node Afvbpspfx Airewn Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Nwedpfx Aij Afva Ssrsn Machine weight approx.: 8 t

Condition: used, Technical details: Nwjdsu Nfwlepfx Airjn Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Technical details: height over floor: 930 mm machine weight approx.: 75 +( 27kg Untergestell) kg dimensions L x W x H: 0,6 x 0,48 x 0,43 m Nwjdpfx Aju Ngdtsiron EDGE CHAMFERING MILLING MACHINE Application: For chamfering Machine table: WxD: 600 x 240mm with limit stop bar LxH: 400 x 25mm built-in tool: cutter approx. 50mm with 45° milling form Chamfering width approx. 6mm voltage: 380 V with ON/OFF switch *

Condition: used, Year of construction: 1964, Technical details: shaft diameter: max. 120 mm work piece - max.: 800 mm height of profile: Tiefe: max. 90 mm grinding spindle speed: nicht bekannt U/min Table dimensions: Ø 150 mm voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 0,675 t dimension machine xH: 0,75 x 0,70 x 2,0 m Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clamping head. -travel=vertical 950mm by handwheel and transversal 80mm by crank handle -abrasive device with diamond, adjustment crosswise= 80mm. Table other specifications: -with fixed tip holder 60°. -speed 63 / 125 rpm. -adjustment vertical 600mm, in height 1.100mm, operation manual. centering block: -prismatic guide Nodpfx Aou Ngr Deirewn accessories: -fixed tip L=180mm -fixed tip L=300mm -div. shank grinder -div. clamping and auxiliary tools *

Condition: used, Year of construction: 1986, Technical details: x-travel: 1120 mm y-travel: 345 mm z-travel: 400 mm spindle taper ISO: SK50 spindle head swivable left - right: 90° ° Distance rear edge of table to column guideway: min./max.: 125 / 470 mm max. torque on the spindle: 280 kpm range of revolution per miute: 28 - 1400 / 18step U/min feed:: X/Y: 16 - 800 und Z: 5 - 250 mm/min Table dimensions: 1600 x 460 mm table surface area: 1400 x 330 mm table load: 1,5 t total power requirement: 14,5 kW machine weight approx.: 3900 kg dimension machine xH: 2,7 x 2,0 x 2,1 m dimensions electric cabinet: 0,47 x 0,8 x 1,5 m Equipment: 3-axis measuring device EISTA VISULESTA II E Accessories: Machine vice 155mm 2x counterholder and shaft 4x machine feet Nodpfx Aju Iy Hloirewn 2x cranks (for machine table and for vice) *

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW weight approx.: 1200 kg dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included. Nwjdpfx Asu Nc Nleirjn *