Used Sanco Dosing Installation for sale (10,103)

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, We are offering for sale a complete, fully functional ZREMB concrete plant, designed for the production of ready-mix concrete, precast elements, and paving stones. The plant is equipped with high-quality components from reputable manufacturers, automatic control, and a modern recycling and heating system, enabling year-round production. Key equipment: ZREMB Concrete Plant • Complete steel structure with enclosure, • Automatic control system SAUTER GmbH SUS 4.0, • Control container, • Full automation of the production process. ORU Mixers • Planetary mixer 750 l, • Planetary mixer EPM 3000 ES (3000 l), • EPM 3000 equipped with two independent discharge outlets, increasing production capacity. Dosing System • Lifting and filling device, • Tipping skips, • Buffer tank above the mixers, • Aggregate distributor for two mixers, • Cement scales for both mixers, • Water scale with flow meter, • Chemical additive dispenser, • Liquid pigment dispenser, • Microwave moisture probes in the mixers and aggregate tanks. Material Storage • Aggregate storage silo 6 × 25 m³ with a roof, • Aggregate belt scales, • 3 cement silos with complete equipment, • 1 two-chamber silo, • 5 screw conveyors. FEGO INDUSTRY Recycling System Complete installation for concrete and washout water recovery: • Capacity 12 m³/h, • Aggregate washing 2–32 mm, • Aggregate separator, • Washout water tank 40 m³, • Intermediate tank 1.5 m³, • Recycling tank, • 3 slurry pumps. FEGO INDUSTRY Heating System Water heating • Boiler 255 kW, • Capacity: • 13,500 l/h (10°C → 45°C), • 6,750 l/h (10°C → 70°C), • Fuel: light fuel oil, • Fuel consumption: 21.5 kg/h. Aggregate heating Hot air system: • Thermal power 250 kW, • Air temperature 110–120°C, • Capacity 6500 m³/h, • Fan 18.5 kW. Gsdpfx Akszw Aq Rjaoug Thanks to the installation, production is possible even during the winter season. The sale also includes: • Complete supporting structure, • Working platforms, • Enclosure made of sandwich panels, • Technological installations, • Electrical installations, • Complete control system, • Technical documentation (if available). Advantages - Automatic concrete production - Two independent ORU mixers - Two discharge outlets from the EPM 3000 mixer - Complete washout water recycling - Water and aggregate heating - Possibility of operation throughout the year - Complete installation ready for dismantling and reassembly Interested parties are invited to contact us by phone at 605 583 061 to obtain detailed information and arrange a presentation of the equipment.

Condition: excellent (used), functionality: fully functional, Natural Dye Mixing Installation Installation for mixing natural dyes consisting of: 2 stainless steel tanks with agitator Internal dimensions of each tank: ø 590 mm x 850 mm External dimensions of the tanks: ø 600 mm x 1650 mm Manifold with 7 valves Manufacturer: GEA Tuchenhagen GmbH Dosing pump Manufacturer: Sera GmbH Flow meter Manufacturer: Endress+Hauser Guodjw Dfxgopfx Akaog Type: PROMAG A Stainless steel control cabinet Manufacturer: APV

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Guedpfoh Nmt Dox Akasg Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Year of construction: 2012, condition: good (used), Derichs Stainless Steel screw conveyor Guedpsyc Tt Uofx Akajg Screw conveyors are used to meter or convey product horizontally up to approximately 7 m or vertically up to 3 m. Depending on the application, either enclosed tubular screw conveyors or trough screw conveyors are used. The advantage of trough screw conveyors is that the trough lids can be opened for cleaning. The bulk material is given into the conveyor through the inlet. There it is conveyed by the screw spirals to the outlet. In the case of dosing and weighing processes, the drive is generally controlled by a frequency converter in order to achieve a coarse and finest flow, which allows a weight-accurate dosing. In order to prevent product trickling at the outlet an optional pneumatically operated outlet flap can be installed. Manufacturer: Derichs Model: FMS-T-400 Year: 2012 Screw Diameter: 400 mm Screw Length: 4.660 mm Power: 5,5 kW / 50Hz Capacity: 80 m3/h Motor Speed: 43U/min Machine Dimensions LxWxH: 5.800x700x530

Condition: excellent (used), FOR SALE: Complete Automatic Production Line for Paints, Primers, Undercoats, and Acrylic Plasters - DIAMAC (Italy) For sale: a highly efficient, professional industrial line from the renowned Italian manufacturer DIAMAC. The installation is in ideal condition - it has been used only a dozen times. KEY ADVANTAGES & WORKFLOW: Continuous production cycle (zero downtime): While the operator unloads the first tank via the filling line, the next batch of finished product is being prepared in the second dissolver. Complete system: The installation comes fully equipped with all necessary pumps, transport pipelines, filters, and electrical control cabinets. Full documentation: The machines include a complete set of design drawings, electrical schematics, technical documentation, operating manuals, and CE certificates. PRODUCTION LINE COMPONENTS: Main Dissolver Unit: Guedpfx Akjztwp Hoajg 2 x Stationary Dissolver 50 HP (2 x 1500 L) with Inverter: Mounted on a high steel support structure (platform + stairs) Made of stainless / acid-resistant steel (INOX) Automatic control and cycle programming Automated dosing/filling for water, 4 types of resins, and dry/powder raw materials Integrated washing system: automatic water supply for tank cleaning + discharge of wastewater to separators (allows reuse of purified water) Direct connection to the semi-automatic filling machine Stationary Dissolver 30 HP with Inverter (2500 L) Slow-speed Stationary Mixer 10 HP (6000 L) Column Dissolver 15 HP with Inverter + dedicated tank/vessel Laboratory Dissolver 2 HP with Inverter (stepless speed adjustment for testing and formulation) Industrial Tinting System (Dosing & Coloring Unit): High steel support structure with 16 INOX stainless steel tanks and slow-speed mixers. Application: production of colored paints or multi-component specialty products (up to 16 additives). Upgrade options: Currently configured for manual operation, but fully prepared for semi-automatic production (gravimetric/volumetric dispensers) or fully automatic production (by connecting an optional PLC + dispensers/flow meters to generate color formulas via PC). Packaging & Filling Unit: DIAMAC mod. DPC30 semi-automatic liquid filling machine: Designed for packaging finished products into containers (buckets, cans, etc.) Can be permanently connected to the main 50 HP stationary dissolvers ADDITIONAL INFORMATION: Option to purchase additional auxiliary equipment. Equipment is ready for inspection and transport. Please feel free to contact me for further details, pricing, or to arrange an inspection.

Condition: new, MC SEAMER Automatic Can Seamer – Stainless Steel The MC SEAMER automatic can seamer is designed for the automatic sealing and crimping of metal containers in industrial production lines for the food and canning industries. The machine automatically joins the can body and its lid through a double sealing process, providing a hermetic and uniform seal, which is essential for subsequent pasteurization, sterilization, storage, and distribution processes. Gedjzwv H Sjpfx Akaeug Its robust stainless steel construction and enclosed work area with safety guards make it particularly suitable for continuous production industrial environments. MAIN FEATURES -Manufacturer: MC SEAMER -Type: Automatic can seamer -Application: Automatic sealing/crimping of containers -Industrial rotary sealing system -Automatic can handling and positioning -Automatic placement and sealing process -Designed for continuous industrial production -Robust stainless steel construction -Enclosed work area with safety guards -Integrated control panel with Siemens HMI -Integrable into canning and packaging lines -Designed for professional food processing environments APPLICATION The MC SEAMER is designed to automatically seal cans by forming the mechanical bond between the container body and its corresponding lid. The cans are automatically fed into the machine and transferred to the sealing section. Once sealed, they are discharged to continue directly to the next stage of the process. It can be integrated with: Can fillers Automatic lid feeders Product dosing systems Can conveyors Weight checkers and inspection systems Pasteurizers Industrial autoclaves Can washers and dryers Labeling machines Packaging equipment and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, food manufacturers, and industrial packaging plants that require an automatic system for sealing metal cans. It can be integrated into lines for vegetables, legumes, fish and seafood, meat products, pet food, sauces, ready meals, and other canned goods, depending on the installed format and the machine configuration. The MC SEAMER can be used as a stand-alone seamer or integrated into a complete automatic line for filling and sealing cans. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), SIDEL / HEMA SF Classic MV2 Volumetric Filler SIDEL / HEMA SF Classic MV2 automatic volumetric filler, designed for the precise dosing and filling of food products into containers within continuous industrial production lines. The equipment uses a volumetric filling system, allowing control over the amount of product introduced into each container and maintaining uniform dosing throughout the production process. The SF Classic MV2 incorporates a product feeding hopper, automatic container transport, and a control system with a Siemens HMI, offering an automated solution for professional filling applications in the food industry. MAIN FEATURES -Manufacturer: SIDEL / HEMA -Model: SF Classic MV2 -Type: Automatic volumetric filler -Volumetric dosing system -Automatic product feed -Integrated product hopper -Automatic container handling Gsdpfx Aozw Dgyokaeug -Integrated infeed and outfeed conveyor -Automatic container positioning -Control panel with Siemens HMI -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial operation -Integrable into automatic filling and packaging lines APPLICATION The SIDEL / HEMA SF Classic MV2 is designed to automatically dispense a controlled volume of product into each container. The product is fed from the top hopper to the volumetric system. The containers arrive automatically via the conveyor, are positioned in the filling area, and receive the set amount of product before continuing to the next stage of production. This system is particularly suitable for applications where dosing consistency, automated filling, and continuous operation are required. It can be integrated with: Product feeders Container conveyors Seamers and cappers Can closers Cap feeders Weight checkers Inspection equipment Labeling and coding machines Packaging equipment and end-of-line equipment Complete automatic filling lines APPLICATIONS Especially suitable for canning industries, food manufacturers, sauce producers, food preparation companies, and other processing plants that require an automatic volumetric filling system. Depending on the installed configuration, it can be used for different liquid, semi-liquid, viscous, or particulate food products, adapting to the specific product and container format. The combination of SIDEL / HEMA technology, volumetric dosing, and automatic container handling makes the SF Classic MV2 a particularly interesting solution for continuous industrial filling lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), functionality: fully functional, warranty duration: 12 months, filling weight (min.): 5 g, filling weight (max.): 5,000 g, Introducing the brand-new DLPACK 260 Servo! Built with stainless steel and equipped with Siemens controls, this machine delivers exceptional performance for a wide range of applications, from powders and granules to food and non-food products. The first 20 machines have already been built and commissioned, achieving an output of up to 105 bags per minute. With a dosing range of 5g to 5000g and bag sizes from 60–260 mm (W) × 80–500 mm (L), it is designed to handle almost any packaging requirement. Key Features: Brand: DLPACK Model: DLPACK 260 Servo Gedpfxsx Ag Iks Akaeug Capacity: Up to 105 bags/min Dosing range: 5g – 5000g (via separate dosing) Bag format: 60–260 × 80–500 mm Construction: Stainless steel Control system: Siemens Warranty: 12 months Delivery time: 10 weeks Optional extras: Printer, labeler, weigher, screw dosing, and more – fully customizable for your application. Suitable for pillow bags and almost any product type. About DL Packaging DL Packaging specializes in modernizing and installing dosing systems, vertical form-fill-seal machines, cartoners, and end-of-line packers. Our “Second Life Packaging Solutions” are rebuilt to near-new standards and can be combined into fully automated lines – all from a single source. With over 30 years of experience, in-house dosing capabilities, comprehensive warranties, and tailored advice, our experts design the perfect machine or packaging line for your needs. Remote support, maintenance contracts, and a warehouse stocked with over 20,000 parts ensure your production keeps running smoothly. DL Packaging – your worldwide partner in retrofitted packaging solutions, based in Oosterhout and proud retrofit partner of the Rovema Group.

Condition: excellent (used), WOLFKING Industrial Meat Grinder – Stainless Steel WOLFKING industrial meat grinder, designed for the continuous grinding and size reduction of meat and meat products in high-capacity industrial lines. The equipment incorporates a large feed hopper that allows for bulk product input and controlled conveyance to the grinding system. Its robust construction and powerful drive are designed for continuous operation in professional meat processing facilities. The industrial configuration of this type of grinder allows for preparing the raw material with an adequate particle size before subsequent operations of mixing, emulsification, forming, cooking, or packaging. MAIN FEATURES -Manufacturer: WOLFKING -Type: Industrial meat grinder -Application: Meat and meat products -Continuous grinding -Large feed hopper -Automatic product feed to the grinding system -Feed screw system -Industrial cutting assembly -High-power electric motor drive -Controllable speed/operation -Primarily stainless steel construction -Robust structure for intensive use -Integrated control panel Gsdpezxwwhjfx Akajug -Protections on moving parts -Designed for continuous industrial production -Integrable into complete meat processing lines PROCESS The meat is fed into the feed hopper, from where it is conveyed to the grinding mechanism. The feed system forces the product in a controlled manner towards the cutting assembly, where size reduction takes place before discharge to the next stage of the process. The final size of the product will depend on the installed plate, blades, and cutting configuration. It can be integrated with: Bin/cart lifters Feed conveyors Mixers Industrial cutters Emulsifiers Vacuum mixers Formers Stuffers Dosing systems Meat product preparation lines APPLICATIONS Especially suitable for slaughterhouses, cutting rooms, meat product manufacturers, meat processors, and prepared food plants that require a high-capacity solution for size reduction. Depending on the installed cutting system and the characteristics of the raw material, it can be used for beef, pork, poultry, and various meat preparations. The combination of WOLFKING technology, large hopper feed, and industrial construction provides a robust solution for continuous grinding and meat preparation processes. Machine available for inspection. Additional technical information, dimensions, cutting configuration, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs Gjdsi Dtbqepfx Akaeug > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Guodpfxey Ah Tkj Akaeg Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Gedpfszf N Ncex Akaoug Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Year of construction: 2020, OVERVIEW This Permeare ADA 600-1000 ion exchange resin unit, manufactured in 2020, is designed for the treatment of food-grade liquids, especially wine and must. The system can be used for tartaric stabilization of red and white wines and musts by means of ion exchange resin technology. The machine is a compact, skid-mounted treatment unit with four vertical resin columns, stainless steel pipework, a dosing pump system and an integrated electrical control cabinet. The system operates with two resin columns working alternately, allowing one column to be in production while another column is regenerated. The process is controlled by PLC and monitored via a Siemens SIMATIC Touch Panel and a Mettler Toledo M200 analytical controller. The unit is manufactured with metallic parts in AISI 316 stainless steel, while the plastic parts are specified as suitable for food industry use. The resin volume is listed as 120 litres. The maximum column flow is indicated as approx. 40 hl/h. The machine is supplied with documentation including instruction manual, P&ID process diagram and electrical schematics.   TECHNICAL DATA - Manufacturer: Permeare S.r.l. - Manufacturer Location: Milan, Italy - Machine Type: Ion exchange resin unit / softening unit - Type / Model: ADA 600-1000 - Year of Manufacture: 2020 - Application: Ion exchange treatment / tartaric stabilization of wine and must - Process Principle: Ion exchange resin treatment with alternating resin columns - Resin Volume: 120 l - Resin Type: Type A - Resin Supply Form: OH- - Maximum Column Flow: approx. 40 hl/h - Flow Rate per Column: 4–10 BV/h Gujdozh T R Ajpfx Akajg - Dosing Pump: Chemical / regenerant dosing pump installed on skid - Maximum Operating Pressure, Process Side: 10 bar at 38°C - Maximum Design Operating Pressure: 10 bar - Maximum Liquid Inlet Pressure: 5 bar - Operating Temperature Range: 0 – 40°C - Storage Temperature Range: +5 – +50°C - Material, Metallic Parts: Stainless steel AISI 316 - Material, Plastic Parts: Suitable for food industry use - Skid Construction: Open stainless steel frame structure - Power Supply: 230 VAC - Frequency: 50 Hz - Nominal Power: 1 kW - Nominal Current: 4.2 A - Control System: PLC-controlled unit - Operator Panel: Siemens SIMATIC Panel Touch - Analytical Controller: Mettler Toledo M200 - Condition: Used, installed / as complete skid-mounted industrial process unit

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: Guedpfxoyfflzj Akaeg As a conventional diesel engine using heavy fuel oil (HFO); As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: like new (used), Industrial Linear Cooler – Stainless Steel Industrial linear cooler in stainless steel, designed for the continuous cooling of food products after cooking, scalding, pasteurization, or other heat treatment processes. The equipment allows for the gradual and controlled reduction of the product temperature as it moves through the different cooling zones, providing a high-capacity solution for continuous processing industrial lines. Its stainless steel construction, long processing length, and integrated transport system make it especially suitable for fruit, vegetable, canning, frozen food plants, and other food applications. MAIN FEATURES - Type: Industrial linear cooler - Application: Continuous cooling of food products - Continuous processing system - Automatic product transport - Several sections/process zones - Water circulation and distribution system - Integrated process pipes, pumps, and valves - Primarily stainless steel construction - Robust structure for industrial operation - Large treatment surface - Continuous discharge system - Top access for inspection and cleaning - Hygienic design for the food industry - Integrable into automatic processing lines PROCESS The product from a previous thermal stage enters the linear cooler continuously, where it is transported through the different zones of the equipment. During the process, the product temperature is gradually reduced using a water-cooling system, according to the configuration and operating conditions of the installation. The linear design provides a controlled dwell time and allows for maintaining a continuous product flow between the different production phases. It can be installed after: - Linear cookers - Scalders - Heat treatment systems - Vegetable preparation lines - Pasteurization processes And subsequently connected to: - Inspection belts Gsdpfsx S Iu Tsx Akajug - Draining systems - Sorting equipment - IQF freezing tunnels - Filling and packaging machines - Weighing and dosing systems APPLICATIONS Especially suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and other food industries that need to quickly reduce the product temperature after a thermal stage. Depending on its configuration, it can be used with vegetables, legumes, fruits, and other food products processed continuously. Its large capacity, stainless steel construction, and linear configuration provide a robust solution for continuous cooking and cooling industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 48 mm, clearance between the columns: 460 mm, displacement volume: 371 cm³, injection pressure: 1,630 bar, injection weight: 341 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,250 mm, total height: 1,800 mm, overall weight: 5,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A5-IU604 D=48 Clamping force: 160T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Basic standard equipment Gsdpfx Ajzz Spdskasug Suitable 12 kg linear robot available upon request. Optional equipment: CE standard Quick-change version of the plasticizing unit with Harting interface 1 set of core pull Dosing signal interface with HAN-3A connector KEBA 1000 1 set with 6 glass flow meters EU67

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ hour.High quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Gsdpfx Akox D A N Teaeug Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: used, functionality: fully functional, machine/vehicle number: POLPAK 3000C7, POLPAK packaging machine for bulk products, ice cream, powders. Automatic packaging line for bulk products in pillow-type bags with a weight range of 0.5-2kg. The set includes: - POLPAK 3000C7 packaging machine - Auger dosing unit - Inclined auger feeder - Receiver for finished packages 400x2m - Vide-Jet printer - Prepared for labeler installation Gsdpjx S Hqgefx Akajug - Labeling head The machine was used from 2021 to 2023. Currently, the machine is not in use due to a change in company operations.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around €250,000. Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Guodpfow Ttxfex Akaeg Advantages: Additional information about the bagging machine. System Dimensions: The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Machine Output: The machine has a capacity of approximately 500 kg per hour. Dimensions and Weight of the Bags: The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Maintenance Costs: The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high-output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high-reliability dry ice machine. DrDryice.

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition Guodpjzht H Rsfx Akaog • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: excellent (used), functionality: fully functional, MONDINI EVOLUZIONE SUPER E380VG PET Packaging Line for Solids and Liquids MONDINI EVOLUZIONE SUPER E380VG automatic packaging line, designed for filling and packaging solid and liquid products in PET containers, integrating different dosing and handling operations within a single industrial facility. The line combines a multi-head weighing and dosing system for solid products with stations for incorporating liquid components, enabling formulations in which the container contains a solid part and a covering liquid, sauce, brine, or other liquid component, depending on the installed configuration. Its construction, primarily in stainless steel, elevated platform, automatic transport systems, and safety enclosures, provides a complete solution for professional food packaging lines. MAIN FEATURES -Manufacturer: MONDINI -Model: EVOLUZIONE SUPER E380VG -Type: Automatic PET packaging line -Application: Solid + liquid products -Automatic container feeding system -Solid product dosing -Integrated multi-head weigher -Weight-controlled dosing -Independent system for liquid incorporation -Automatic container transport Gujdpfewny Rxsx Akaog -Synchronized positioning at stations -Elevated platform for dosing equipment -Structure and processing areas mainly in stainless steel -Safety enclosures and protections -Continuous industrial operation -Integrable with inspection and end-of-line equipment PROCESS PET containers are automatically fed into the line and transported to the various processing stations. The solid product is fed to the multi-head weigher, where it is divided into different portions, and the appropriate combination is selected to achieve the target weight. Subsequently, the dose is discharged into each container. In a later stage, the liquid component can be incorporated, allowing the product to be completed before the final packaging operations. The line can be combined with: PET container feeders Multi-head weighers Liquid dispensers Product feeding systems Sealing/closing equipment Weight controllers Metal detectors Labelers Case packers and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, manufacturers of ready meals, processed vegetables, pickles, and other food companies that need to package combinations of solid and liquid products. Depending on the installed configuration, it can be suitable for vegetables, legumes, olives, pickles, prepared products, and other foods with covering liquids or sauces. The combination of MONDINI EVOLUZIONE SUPER E380VG, multi-head dosing, and filling of solids and liquids provides an automated solution for PET packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Gujdpfoufih Dex Akaeg Feed hopper SVEDALA H-36 cone crusher Dosing hopper SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Complete electrical installation with control cabinet in container

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm Gusdpfx Akoy Rk Igjaeg - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Gujdsx Rvcijpfx Akasg Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: used, Year of construction: 2025, COLOMBO R. Discontinuous sandwich panel production line Complete PUR sandwich panel production line for manufacturing panels up to 8 meters in length. Fully automated and equipped with a heated press, high-pressure foaming machine, and integrated roll forming system. A high-performance industrial solution for producing roof and wall sandwich panels in compliance with European standards. Production specifications - Production of sandwich panels up to 8 meters long. - Panel thickness: 40 - 100 mm. - Pre-painted steel thickness: 0.40–0.80 mm. - Manufacturing of roof and wall sandwich panels. - Capability to produce tile-effect sandwich panels. - Automatic cut-to-length system. - Automated machine settings. - Electrical components from leading brands: Siemens, Rexroth, Schneider Electric, Omron, and SMC. Line configuration - 4-platen heated press. - Maximum panel length: 8 meters. - Production of polyurethane (PUR) insulated sandwich panels. - ULTRAMIX 100 high-pressure foaming machine with 1:1 mixing ratio and self-cleaning mixing head. - Complete roll forming line for steel facings. - Two roll forming lines for manufacturing different panel profiles. - 7-ton hydraulic decoilers. Godjzrhtmopfx Akaeug - Automatic hydraulic cutting system. - PLC control system with touchscreen interface. - Automatic control of panel lengths and production quantities. - Fully automatic dosing of foam components. - CE-compliant installation with integrated safety systems. Included - Complete production line. - High-pressure foaming machine. - Heated press. - Roll forming equipment. - Outfeed tables. - Electrical control cabinet. - PLC control system. - Technical documentation included. Panel length: Up to 8 meters Panel thickness: 40 - 100 mm Pre-painted steel thickness: 0.40 – 0.80 mm Panel types: Roof and wall sandwich panels, capability to produce tile-effect sandwich panels Control system: PLC control with touchscreen interface and automatic settings Foaming machine: ULTRAMIX 100 high-pressure foaming machine (1:1 mixing ratio) Press type: 4-platen heated press