Used Sanco Dosing Installation for sale (10,072)

Condition: used, total width: 762 mm, total length: 1,448 mm, total height: 1,800 mm, For sale is a used Capsugel ULTRA 8 II, a semi-automatic capsule filling machine for powders in hard capsules. The machine is suitable for applications in the dietary supplement, pharmaceutical, and powder processing industries. The ULTRA 8 II is a production machine with a stainless steel design in the product and work areas, powder hopper, capsule feeder, rotating processing unit, and separate control cabinet. The machine shown is offered in its current condition and with the existing scope of supply. Technical data: Manufacturer: Capsugel / Lonza Capsugel Model: ULTRA 8 II Machine type: semi-automatic capsule filling machine / capsule filler Filling material: powder Processing: hard capsules; the actually installed capsule or format part must be checked on-site Production capacity: up to approximately 33,000 capsules/hour according to the manufacturer; the actually achievable capacity depends, among other things, on capsule size, product, dosage, format parts, operation, and machine condition. Format ranges specific to the series: depending on the format part, sizes from 000 to 5 are mentioned in comparable offers; the specific scope of supply of this machine must be checked based on the available format/change parts. Dimensions according to the manufacturer: approx. 1,448 × 762 × 1,800 mm (L × W × H) Installation area according to the manufacturer: approx. 1,448 × 762 mm Weight according to the manufacturer: approx. 680 kg Djdpfozvmnwox Aptskt Closing system: integrated, horizontal hydraulic closing system; according to the manufacturer, no compressed air is required for the closing process. Drives: variable speed drives for capsule alignment, dosing screw, and rotary table Vacuum: integrated vacuum pump Capsule feeder: large-capacity capsule hopper and automatic ring spinner Format change: "pinned" change parts for quick and reproducible setup Operation/control: digital displays and separate control cabinet Design: stainless steel table top, ring carrier, powder hopper, and enclosure Equipment and visible components: Stainless steel powder hopper Capsule feeder and rotating capsule holder Dosing and filling area Integrated drives and gearboxes Hydraulic assembly with pressure gauge Integrated vacuum unit Separate control cabinet with control, protection, and regulation components Emergency stop switch Stainless steel machine frame and enclosure

Condition: like new (used), TURATTI Industrial Slicer / Dicer – Stainless Steel TURATTI industrial slicer/dicer made of stainless steel, designed for continuous slicing of fruits and vegetables in professional fruit and vegetable processing lines. The equipment incorporates a feeding system with an inclined conveyor belt, which continuously transports the product to the cutting unit. Its configuration allows for the automation of product preparation and ensures a uniform cut before subsequent washing, heat treatment, freezing, or packaging operations. Made primarily of stainless steel, it features a hygienic and compact design suitable for food processing plants. MAIN FEATURES Dsdpszxwx Sjfx Aptokt -Manufacturer: TURATTI -Type: Industrial slicer / dicer -Application: Fruits and vegetables -Automatic and continuous operation -Feeding system with inclined conveyor belt -Hopper / product receiving area -Controlled feeding to the cutting unit -Mechanical cutting / dicing system -Continuous discharge of the processed product -Electric drive -Construction primarily in stainless steel -Mobile structure on wheels -Compact design -Safety guards in moving areas -Accessibility for cleaning and maintenance -Integrable into complete vegetable processing lines PROCESS The product is introduced into the feeding area and picked up by the inclined belt, which transports it in a controlled manner to the cutting system. In the cutting unit, the product is processed by the installed blade assembly, obtaining the required format before being discharged to the next stage of production. The thickness, geometry, and type of cut will depend on the head, blades, and configuration currently installed in the machine. It can be integrated with: Hoppers and feeding systems Fruit and vegetable washers Sorting tables Peelers Blanchers Coolers IQF freezing tunnels Inspection systems Weighing and dosing systems Packaging lines APPLICATIONS Particularly suitable for fruit and vegetable processors, manufacturers of frozen products, canneries, IV/V range industries, and prepared food producers. Depending on the installed tooling, it can be used for different fruits, vegetables, and produce that require slicing or dicing operations before further processing. The combination of TURATTI technology, automatic feeding, and stainless steel construction provides an industrial solution for automating the continuous cutting of vegetable products. Machine available for inspection. Additional technical information, such as cut type and dimensions, production capacity, overall dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Dksdpfxownr Trs Aptet

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O. Type: DOSOWNIK 2G, Number: 439, Year of construction: 2014, Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Dimensions: 4200 mm x 1300 mm x 1800 mm. Dkodpfx Ajvz H N Noptst

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. Dkedpfx Apezmyvijtot • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and sealing machine - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Hot-air system for tube sealing - Temperature control for hot air - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available - Documentation available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION Suitable for filling and sealing plastic tubes. The machine is particularly well-suited for creams, gels, ointments, pastes, and other liquid to viscous products, depending on the product and the installed dosing configuration. CONDITION Used machine in good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. Djdpfx Apszyu R Uotekt The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. The exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available upon request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Djdpox R Dh Hefx Aptskt Documentation available

Condition: used, BARMAG extrusion system Dksdouak Nlopfx Aptot consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Year of construction: 2022, operating hours: 3,863 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 006682, On behalf of our customer, we hereby offer a virtually new OI sorting. This installation can be tested in operation at the customer. The machines consist of; Sorting oi: 0050 Bunker belt with dosing drum BDF1200/2000*10000 0060 Ascending belt to screen HBT1200/1600*14000 0070 Cardboard screen 1640*7000 Platform Cage ladder 0080 Adjustments to existing paper chain belt 0090 Switch cabinet included Dksdpfxowq D Dne Aptot Operating hours only 3863 In consultation with the customer and Bollegraaf, a guarantee is possible under certain conditions See the attached PDF for a precise technical description per machine

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Dkodpfjx R Df Ssx Aptot Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Dedpfx Ajzhvagsptjkt Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: LE-2104-133, For Sale: Labtech LE30-30/C 3D Filament Extrusion Line We are offering for sale a high-quality 3D filament extrusion line manufactured by Labtech Engineering Co., Ltd., a well-known producer of laboratory and production extrusion equipment. Technical Specifications Dedpfxezgwlzo Aptskt Manufacturer: Labtech Engineering Co., Ltd. Model: LE30-30/C Year of Manufacture: 2021 Power Supply: 400 V Phase: 3 Installed Power: 16.7 kW CE Certified Price: EUR 45,000 Condition The machine is in excellent condition, has been professionally maintained, and is ready for immediate production use. Included in the Sale Complete 3D filament extrusion line Additional spare barrel 25mm Additional spare screw 25mm/24D Optional Equipment Available for Purchase Laser diameter gauge Material dryer Material feeding/dosing system This extrusion line is suitable for the production of high-quality 3D printing filaments and offers reliable operation with consistent output quality. Additional photos, technical details, and machine inspections can be provided upon request. Location: Ivanka pri Nitre

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Dkedpfx Apjw Ttxfstst Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around €250,000. Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Machine Output: The machine has a capacity of approximately 500 kg per hour. Dimensions and Weight of the Bags: The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Maintenance Costs: The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high-output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high-reliability dry ice machine. DrDryice.

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m Dsdpfx Aog N Nlveptskt MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: excellent (used), Rare opportunity. Complete industrial puff pastry production line - from bulk flour storage to laminated dough. Comprising two 75 cubic metre Slob outdoor flour silos with automatic transfer, weighing and dosing system,, two stainless steel Diosna WV 240 A Premium mixers with four bowls, Syspal 2024 1 tonne rated bowl tipper and complete AMF Bakery Tromp continuous puff-pastry laminating line. Currently installed and in daily production producing 2 tonnes per hour at 90/100 laminations. Videos available upon request. Dedpfjzvilfox Aptjkt

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy Dodjfguntepfx Aptskt main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: used, mileage: 38,489 km, power: 175 kW (237.93 HP), color: black, gearing type: automatic, total length: 78,500 mm, total width: 25,500 mm, total height: 36,500 mm, loading space length: 60,600 mm, loading space width: 24,800 mm, loading space height: 24,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, power assisted steering, - Air suspension, rear - Air suspension, front For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. Mercedes-Benz Atego 824 L platform/tarpaulin + tail lift 6-cylinder engine! Djdpfx Aoztlrcsptokt Tail lift: BÄR BC 1000 S4-A4 (1,000 kg), A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A2Z rear axle differential lock, A5S axle ratio i = 3.636, B1B electronic braking system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, B5B trailer brake, 2-line system, C2J wheelbase 4220 mm, C5I fastening parts, for platform, C6B steering ZF 8095, C6S stabilizer, for extreme high load, rear axle, C7E front underrun protection (ECE), steel, C7M protection device, lateral, weight-optimized, C8J splash guard, in the fender, C9L extended frame overhang, 200 mm, C9Y omission of rear underrun protection (ECE), D1B driver's air-suspended seat, standard, D1M co-driver's fixed seat, simple, D1Z center seat, with 3-point safety belt, D3X seat cover, plain weave fabric, D4A standard cockpit, D4W window lift, electric, on both sides, D4Y sun visor, lateral, driver's side, D6F air conditioning, D6Y pollen filter, D7A additional thermal insulation, D7L storage compartment, above the windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0E batteries from Banner, E0Y battery cover, E1H batteries, 2 x 12 V/165 Ah, maintenance-free, E1N generator 28 V/100 A, E2J fuse box, E3F additional socket 12 V/15 A, railing, E4B interface, fleet management system FMS, E5A switch no. 1 for external superstructure electrical system, E6A trailer socket 24 V, 15-pin, E6Y reversing warning, combined with hazard warning lights, E7F cable remote control for air suspension, E9H preparation for tail lift control, F1X S-cab ClassicSpace, 2.30 m, tunnel, F5L exterior sun visor, transparent, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7V cab entry, two-step, F8L immobilizer, with transponder, F8X rain/light sensor, G0U economy driving program, G1D gearbox G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I0I tires tubeless, 235/75 R 17.5 front axle, I4A wheel formula 4x2, I6X air suspension, rear axle, J1A combination instrument, 10.4 cm, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeaker, 2-way system, J3N Fleetboard Eco Support, J5S radio, with USB connection and Bluetooth, J9D preparation for toll collection, J9N preparation for Truck Data Center 6 (DTCO), K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5S protective cap for AdBlue dosing system, K7I exhaust system, on the frame on the right, tailpipe pointing inwards, L1B daytime running light, L1H fog lights, halogen, M0S noise encapsulation, according to ECE, M2A engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm, M5C engine version Euro VI, D, M5V High Performance Engine Brake, M8Z fuel preheating, P0L tail lift preparation, Atego, Q1D front spring 4.0 t, parabolic, Q7B trailer coupling Ringfeder, Q7R trailer coupling G 135, for ZAA, Q8Y cross member, later installation of AHK G135 ZAA, R0Z wheel nut cover, R1B steep shoulder rims 6.75 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5Z cruise control, T0J weight variant 7.49 t (3.8/5.0), X2T maintenance documentation, Z4E in-line engine, 6 cylinders, Z5C OM 936, cargo space

Condition: excellent (used), TOYO JIDOKI TVP-E3 Automatic Vacuum Pouch Filling and Sealing Machine TOYO JIDOKI TVP-E3 automatic vacuum pouch filling and sealing machine, designed to automatically perform pouch feeding and handling, product filling, vacuum generation, and hermetic sealing operations within industrial packaging lines. The vacuum sealing system allows air to be extracted from the inside of the pouch before sealing, resulting in a compact and hermetically sealed package. This technology is particularly useful for food products where the goal is to reduce residual air inside the package before subsequent heat treatment, cooling, storage, or distribution operations. MAIN FEATURES -Manufacturer: TOYO JIDOKI -Model: TVP-E3 -Type: Automatic vacuum pouch filling/sealing machine -Application: Flexible pouches -Automatic operation -Automatic pouch handling and positioning -Multiple process stations -Product filling system -Vacuum system -Air extraction from inside the pouch -Automatic heat sealing -Control of the different stages of the cycle -Synchronized transport and transfer -Control panel / HMI -Industrial construction, primarily in stainless steel -Enclosures and safety protections -Illuminated status indicators -Designed for continuous industrial operation -Integrable into complete packaging and heat treatment lines PROCESS The pouches are fed into the system and automatically positioned at the different workstations. Once the pouch is opened and correctly positioned, the product is filled using the corresponding dosing system. Subsequently, the pouch moves to the vacuum stage, where the air present inside the package is reduced. Finally, the machine performs heat sealing of the top of the pouch, resulting in a sealed pouch ready for the next stages of production. Depending on the line configuration, the pouches can continue to: Inspection systems Djdpfx Apezxwy Astekt Weight checkers Metal detectors Pouch washing machines Pasteurizers Autoclaves / retorts Cooling systems Dryers Case packers End-of-line equipment APPLICATIONS Especially suitable for the food industry, canning industries, and manufacturers of products packaged in pouches. Depending on the dosing system and the installed format, it can be used for different liquid, semi-liquid, solid products with liquid coating, and prepared foods, always subject to the specific configuration of the equipment. The combination of TOYO JIDOKI technology, automatic pouch packaging, and vacuum sealing provides an industrial solution for obtaining hermetically sealed flexible packages with an automated and repeatable process. Machine available for inspection. Additional technical information, pouch formats, production capacity, dosing system, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), 3,000 L Complete Pilot Bioreactor / Fermentation System Complete 3,000 L pilot-scale bioreactor installation, fully skid-mounted and integrated on a stainless-steel frame. The complete system is built as an integrated stainless-steel skid installation, including the process vessel, pumps, piping, valves, instrumentation, control system, and auxiliary equipment. The skid is equipped with a platform and access stairs. The installation is highly suitable for testing, developing, and optimizing fermentation processes on a pilot scale. Main components: - Stainless-steel conical process vessel - Maximum working volume: 3,000 L - Heating/cooling jacket - Sampling connection - Custom-built sparger for air/gas injection - Cambridge Sensotec Rapidox 3100 off-gas analyzer - 4 × Watson Marlow 0XZ-63L/4 dosing pumps - Mettler Toledo InPro3250i pH sensor - MT 6850i DO sensor - Endress+Hauser TMR35 temperature sensor - Aerzen blower with 7.5 kW electric motor Dksdpfxozw Rkle Aptet - 2 × 0.2 μm PTFE air filters - Bran+Luebbe N-K11 plunger pump - Netzsch 4NL30A and 4NL40A progressing cavity pumps - Recirculation system - Complete CIP system - Gas control system including control valves and MFCs - PLC control system for pumps, valves, temperature, DO, and other process parameters - SCADA system for monitoring, operation, data logging, and data export - DO cascade control - Complete stainless-steel skid/frame with platform and access stairs - Sweco vibrating sieve --> three decks, not visible in the pictures. - Sieve bend - Screw press - Aseptic capability with tank modification The current installation is not designed as an aseptic system. However, the existing process vessel can be replaced with a suitable aseptic vessel, making it possible to adapt the installation for aseptic fermentation applications. Including documentation & technical knowledge from the manufacturer. In addition, all available technical knowledge regarding the installation, operation, and maintenance is available, providing an excellent basis for future commissioning, operation, and servicing. Complete Integrated Pilot System A highly versatile 3,000 L pilot fermentation system, combining process vessel, pumping, dosing, aeration, temperature control, CIP, process instrumentation, and advanced PLC/SCADA control in a complete stainless-steel skid-mounted installation. An excellent solution for pilot-scale fermentation development, process testing, and optimization.

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door Dksdpfx Apewhy T Tjtot - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), HEMA TD3/1 – Automatic Volumetric Piston Filling Machine The HEMA TD3/1 is an automatic piston filling machine designed for the precise volumetric dosing and filling of food products into containers within continuous production lines. The machine uses volumetric piston filling technology, which is particularly suitable for achieving controlled and uniform dosing of liquid, semi-liquid, and high-viscosity products, depending on the installed configuration. Equipped with a large stainless steel product hopper, an automatic container handling system, and an integrated conveyor, the HEMA TD3/1 offers a robust solution for industrial automatic filling applications. MAIN FEATURES -Manufacturer: HEMA -Model: TD3/1 -Type: Automatic piston filling machine -System: Volumetric piston filling -Automatic product dosing -Stainless steel feed hopper -Automatic container feeding and positioning -Integrated conveyor -Product contact areas in stainless steel -Control panel for the operator -Robust industrial construction -Designed for continuous production -Integrable into filling, closing, and packaging lines APPLICATION The HEMA TD3/1 is designed to automatically dispense a controlled volume of product into the containers as they pass through the filling line. The product is fed from the top hopper to the volumetric dosing system. The containers are automatically transported and positioned at the filling station, where the required amount is dispensed before continuing to the next stage of the process. The piston dosing system is particularly suitable for applications that require precision and consistency in filling volume. It can be integrated with: Container feeders Can and jar conveyors Capping and sealing machines Can sealers Lid feeders Weight checkers Inspection equipment Labeling and coding machines Packaging and end-of-line equipment Dkedpfx Aszw Atrsptot APPLICATIONS Particularly suitable for canneries, food manufacturers, sauce producers, and prepared food companies that require an automatic volumetric filling system. Depending on its configuration, it can be used with sauces, creams, purees, pastes, tomato products, fillings, condiments, and other liquid, semi-liquid, or viscous products. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), ZACMI 40-Cup Rotary Telescopic Filler – Stainless Steel ZACMI automatic telescopic filler with 40 cups, designed for the volumetric filling of solid and particulate food products into containers within continuous industrial production lines. Manufactured by ZACMI, the machine features a rotary telescopic filling system with 40 dosing cups, enabling the automatic and continuous feeding, dosing, and filling of the containers. This type of technology is particularly interesting for the canning industry, where a regular volumetric dosage of solid or particulate products is required, along with their proper introduction into cans or other rigid containers. Its construction, primarily in stainless steel, along with the rotary carousel and automatic transport systems, provides a robust solution for high-production industrial lines. MAIN FEATURES Dedpfx Apszw Dbwstskt -Manufacturer: ZACMI -Type: Automatic telescopic filler -Number of dosing cups: 40 -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dosing -Automatic container handling -Continuous container input and output -Integrated conveyor -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling using a rotary system with 40 cups. The containers are automatically fed and transferred to the filling carousel. During the cycle, the dosing cups control the amount of product and transfer it into the container. Once filled, the containers automatically continue to the next stage of production. It can be integrated with: -Product feeding systems -Can feeders and conveyors -Liquid or brine dosing systems -Can sealers -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling and end-of-line equipment APPLICATIONS Especially suitable for canning industries and processors of vegetables, legumes, and other solid or particulate foods that require a high-capacity automatic filling system. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. The combination of 40 cups, rotary operation, and telescopic filling technology makes this ZACMI a particularly interesting solution for continuous production canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, MC SEAMER Automatic Can Seamer – Stainless Steel Dkjdpjzwv H Sjfx Aptjt The MC SEAMER automatic can seamer is designed for the automatic sealing and crimping of metal containers in industrial production lines for the food and canning industries. The machine automatically joins the can body and its lid through a double sealing process, providing a hermetic and uniform seal, which is essential for subsequent pasteurization, sterilization, storage, and distribution processes. Its robust stainless steel construction and enclosed work area with safety guards make it particularly suitable for continuous production industrial environments. MAIN FEATURES -Manufacturer: MC SEAMER -Type: Automatic can seamer -Application: Automatic sealing/crimping of containers -Industrial rotary sealing system -Automatic can handling and positioning -Automatic placement and sealing process -Designed for continuous industrial production -Robust stainless steel construction -Enclosed work area with safety guards -Integrated control panel with Siemens HMI -Integrable into canning and packaging lines -Designed for professional food processing environments APPLICATION The MC SEAMER is designed to automatically seal cans by forming the mechanical bond between the container body and its corresponding lid. The cans are automatically fed into the machine and transferred to the sealing section. Once sealed, they are discharged to continue directly to the next stage of the process. It can be integrated with: Can fillers Automatic lid feeders Product dosing systems Can conveyors Weight checkers and inspection systems Pasteurizers Industrial autoclaves Can washers and dryers Labeling machines Packaging equipment and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, food manufacturers, and industrial packaging plants that require an automatic system for sealing metal cans. It can be integrated into lines for vegetables, legumes, fish and seafood, meat products, pet food, sauces, ready meals, and other canned goods, depending on the installed format and the machine configuration. The MC SEAMER can be used as a stand-alone seamer or integrated into a complete automatic line for filling and sealing cans. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), FAM ILC-3D Linear Dicer / Cubing Machine – Stainless Steel FAM ILC-3D industrial dicer/cubing machine, designed for continuous three-dimensional cutting of food products into cubes, strips, and other regular shapes, depending on the installed blade set and cutting dimensions. Manufactured by FAM, a specialist in industrial cutting systems, the ILC-3D is designed to produce a uniform end product through a sequence of cuts in different directions. Its configuration is particularly suitable for lines where precision, size regularity, and continuous production are required. Its construction, primarily in stainless steel, feeding system, and interchangeable cutting unit allow it to be used in industrial plants processing fruits, vegetables, and other food products. MAIN FEATURES -Manufacturer: FAM -Model: ILC-3D -Type: Industrial three-dimensional dicer/cubing machine -Continuous cutting system -Cutting in 3 dimensions -Production of cubes/dices -Possibility of obtaining strips and other shapes depending on tooling -Continuous product feed -Multi-stage cutting system -Interchangeable blade sets -Cutting dimensions determined by the installed tooling -Electric motor drive -Construction primarily in stainless steel -Protected cutting chamber -Robust construction for industrial use -Access for cleaning, maintenance, and blade changes -Integrable into automatic processing lines CUTTING PROCESS The product is continuously fed into the FAM ILC-3D and guided towards the cutting unit. In a typical cubing configuration, the product passes through a sequence of elements that perform the necessary cuts in different planes, ultimately producing cubes of regular dimensions. The final size and geometry depend on the combination of blades, cutting guides, and transverse cutting elements installed in the machine. It can be used for: Cubing in 3 dimensions Cutting into strips Djdpfezxlgqsx Aptskt Uniform product cutting Pre-processing before cooking or blanching Preparation for IQF freezing Preparation for canning Dosing and subsequent packaging APPLICATIONS Particularly suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and producers of prepared meals who need to obtain uniform cuts on an industrial scale. Depending on the tooling and the characteristics of the product, it can process potatoes, carrots, onions, fruits, vegetables, and other food products suitable for mechanical cutting. The FAM ILC-3D offers a versatile solution for industrial lines where continuous cubing, uniformity of the final product, and the ability to adapt cutting dimensions using different blade sets are required. Machine available for inspection. Additional technical information, dimensions, blade configurations, additional photographs, or videos can be provided upon request.

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ hour.High quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Djdex D A N Topfx Aptekt Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...