Used Shirt Finisher for sale (3,264)

Condition: used, Year of construction: 2004, Overview Krones PET bottling line (wet part) built in 2004 for still and carbonated water: a CONTIFORM S8 stretch blow moulder blocked with a MECAFILL isobaric filler and capper, followed by a CANMATIC hot-melt labeller with CHECKMAT inspection. Nominal output is 13,500 bottles/hour on 0.5 L. The line runs 0.5 L, 1.0 L and 1.5 L PET bottles with PCO 1881 neck finish. It is still installed and under power, and can be visited. Technical data - Output: 13,500 bph (0.5 L) - Formats: 0.5 L (11.9 g preform), 1.0 L (22.9 g), 1.5 L (25.5 g) - Neck finish: PCO 1881 - Filler: isobaric, 50 valves, pitch 113 mm - Capper: 10 heads, pitch 113 mm - Blow moulder: 8 cavities, mould sets for all three formats - Electrical supply: 230/400 V, 3-phase, 50 Hz - Year of manufacture: 2004 Scope of Delivery - Stretch blow moulder | Krones | CONTIFORM S8 | 8 cavities, moulds for 0.5 L, 1.0 L and 1.5 L | 2004 - Preform feeding | . | Preform tipper, preform hopper and infeed chute | 2004 - Transfer | Krones | Gripper transfer from blow moulder to filler, 164 grippers - Isobaric filler | Krones | MECAFILL | 50 valves, pitch 113 mm | 2004 - Capper | Krones | 10 heads, pitch 113 mm - Air extraction | Galvani Clean Technology | Extraction system for the filler | 2004 - Nitrogen dosing | VBC | NITRODOSE SYSTEM | Liquid nitrogen dosing - Saturator | Fluid Engineering | EURO SAT | 2004 - CIP unit | Fluid Engineering | EURO SAN | 2004 Gedoz Sl Nrspfx Ag Souh - Labeller | Krones | CANMATIC | Hot melt, wraparound paper labels, 10 plates | 2004 - Laser marker | Domino | Mounted on the labeller - Inspection | Krones | CHECKMAT | Fill level, cap and label inspection at the labeller outfeed - Conveyors | Bottle conveyors and accumulation table up to the shrink wrapper infeed (shrink wrapper not included) - Spare parts | Main mechanical spare parts for the blow moulder and filler block Condition Used - still installed and under power in production. The line can be visited on request. Availability Available from 1 March 2027, after dismantling. Location: Italy.

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation Gedpfx Agewyda Uo Souh finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. Gusdpfx Agsf Epzcs Soh We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: new, Year of construction: 2026, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications. -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety. -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality. Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Gjdjqzxhyepfx Ag Ssuh Maximum Material Length: 500 mm

Condition: new, functionality: fully functional, Year of construction: 2026, Electromechanical Plate Rolling Machine ESR-1300 × 6.5 mm with Asymmetric Rolls The ESR-1300 × 6.5 mm electromechanical plate rolling machine with asymmetric rolls is designed for producing cylindrical and conical shells with various diameters. The machine is intended for bending metal sheets with a maximum thickness of 6.5 mm and a working width of up to 1300 mm. The upper roll diameter is 150 mm. Gusdsrh E Hwepfx Ag Seh Three-roll bending machines from this series are among the most popular solutions due to their relatively simple yet highly functional construction, providing reliable operation and versatility in metal fabrication applications. Main Advantages Asymmetric roll arrangement enabling easier sheet insertion and efficient bending. Lower and upper rolls driven by an electric motor through a gear system and chain transmission. Upper roll rotation in both directions with a tilting and opening mechanism for easy removal of finished workpieces. Manually adjustable lower and side rolls for precise setting of the bending parameters. Cone bending capability for producing tapered elements. Foot pedal control unit with an emergency stop button for safe and convenient operation. Construction and Technology The chain drive transfers rotation from the electric motor to the rolls, ensuring reliable power transmission and smooth operation. The upper roll is equipped with a hinged opening mechanism, allowing quick and easy removal of completed cylindrical or conical parts. The folding upper roll is fitted with a locking system that prevents accidental opening during operation, improving operator safety and machine reliability. Technical Specifications Parameter Value Model ESR 1300 × 6.5 mm Maximum working width 1300 mm Roll diameter 150 mm Maximum material thickness 6.5 mm Motor power 3.0 kW Dimensions (L × W × H) 1810 × 640 × 1050 mm Weight Approx. 770 kg (±2%) Standard Equipment Foot pedal control unit User manual CE Declaration of Conformity

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Gsdpfxey S Auuo Ag Souh Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gjdpfxozfapme Ag Seuh Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system - Hold-downs and workpiece vices: hydraulic, independent --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. Gjdpfx Agowd Ugto Souh LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: good (used), Code: 0040 Brand: BREVETTI MOTTA - ITALY Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Gjdpfxev Am Ibe Ag Ssuh Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit Guodex H T H Rjpfx Ag Ssh - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, functionality: fully functional, type of input current: three-phase, - manufactured in Italy TECHNICAL SPECIFICATIONS: - number of workstations: 10 - diameter of circular saw blade: 500 mm - diameter of blade arbor: 30 mm - max. dimensions of input block: 140 x 140 mm - power of main motor: 5.5 kW - power of feed motor: 0.75 kW - feed rate adjustment via variable speed drive - mechanical adjustment of the height of the finished block - diameter of dust extraction port: 120 mm Machine dimensions: Gujdoz E Rk Ejpfx Ag Soh - length: 200 cm - width: 160 cm - height: 120 cm - weight: approx. 800 kg

Condition: excellent (used), functionality: fully functional, mileage: 29,526 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, empty load weight: 1,868 kg, maximum load weight: 1,232 kg, first registration: 04/2025, next inspection (TÜV): 08/2028, loading space length: 2,800 mm, loading space width: 1,260 mm, loading space height: 1,300 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2025, total length: 5,331 mm, total width: 1,924 mm, total height: 1,865 mm, fuel: diesel, Equipment: ABS, Android Auto, Apple CarPlay, USB port, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, second-hand vehicle warranty, sliding door, soot filter, tire pressure monitoring, traction control, truck registration, Special equipment: Assist package, equipment package: Techno Nav, exterior mirrors electrically adjustable and heated, both sides, Comfort package, Converter package, rear wing doors with windows, interior release for sliding door, reinforced LED boot light, full-size spare wheel, sliding window in the front load/passenger compartment (2nd row of seats), sliding doors left and right, Surround View package, pre-installation for second air conditioning compressor, pre-installation for seat belt warning system. Additional features: 4 speakers, adaptive brake light, driver/passenger airbags, audio system: radio with USB including Bluetooth and DAB radio reception, electrically adjustable and heated exterior mirrors, rear parking assist, driver assistance system: autonomous emergency brake assist (AEB), driver assistance system: hill start assist, driver assistance system: forward collision warning, driver assistance system: speed warning display, driver assistance system: lane keeping assist, speed control system (cruise control) with distance control, automatic transmission (8-speed), rear wing doors without windows, bodywork: panel van, charging cable with type 2 plug (mode 3), bulkhead, multifunction steering wheel for audio control, Luxury package, model update, engine 2.0 L - 130 kW BlueHDi, black 16" wheel hub covers, wheelbase 3275 mm, tire repair kit, tire pressure monitoring system, low emissions according to Euro 6e standard, H4 headlights, right side sliding door, service system: Connect Box (microphone, speaker, SOS button, SIM card), height-adjustable driver's seat with lumbar support and armrest, height-adjustable driver's seat with lumbar support and armrest, double passenger bench right with storage under the bench, front seats with armrests and headrests, start/stop system, 12V socket in the glove compartment, solid paint finish. Gedpfx Agsz E Ruds Ssuh

Condition: used, Year of construction: 2007, Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data Gujdpfez I Rcaex Ag Seh - Product: still wine - Containers: glass bottles, design bottle 0.75 l - Line output: 12,000 bottles/h - Closures: natural cork, aluminium roll-on screw caps, shrink capsules - Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line - Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off depalletizer, layer-pad and empty-pallet handling, 14,000 containers/h | 2023 | - Bottle washer | KHS | INNOCLEAN | single-end washer for returnable glass, up to 14,500 bottles/h, drive and panel modernised in 2022 | 2007 | - Empty bottle inspector | Krones | LINATRONIC M | base, finish, thread, sidewall and residual liquid inspection | 2018 | - Filler-closer monoblock | KHS | INNOFILL NRF | 50 filling valves, cork closer and Zalkin roll-on capper with 10 heads each, CIP, 12,000 bottles/h | 2007 | - Capsuling machine | Kematec | MBK 12 AS | shrink capsules, 12 heating stations, up to 12,000 bottles/h | 2006 | - Bottle dryer | Kematec | T20-3 KMT | air-knife tunnel | 2006 | - Labeller | Krones | ERGOMODUL | 2 cold-glue and 2 self-adhesive stations | 2020 | - Case packer | KHS | INNOPACK SP | pick-and-place packer, KUKA controller | 2006 | - Palletizer and stretch wrapper | ABB, Strapex | FLEXPALLETIZER, SWR 30 | 2 robot cells, pallet destacker, ring wrapper | 2007 | - Pallet labeller | Logopak | LOGOMATIC 920 II PF | print-and-apply | 2007 | - Conveyors | all connecting bottle, case and pallet conveyors of the line Process area - Filtration system | KHS | CORVUS | cartridge microfiltration, 4 housings | 2007 | - Wine warmer-cooler | KHS | INNOPRO | plate heat exchanger, up to 9,900 l/h | 2006 | Condition Used, still installed. Each machine is also listed on its own page with full technical data and photos - follow the link at the end of each row in the scope of delivery. Availability Available immediately. Location: Belgium. Delivery terms: Ex Works Belgium.

Condition: used, maximum load weight: 34,422 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total length: 11,521 mm, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 55 cbm, "X-Shape" design First registered 01/2024, from first owner Delivered in Germany Mileage: 243,148 km Dimensions (L x W x H): 10,149 x 2,320/2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,578 kg Z-chassis, curved design Floor made of continuous 4 mm HardoX steel HB450 Guodpfxoz I Hr Ro Ag Soh Front and side walls made of 3 mm HardoX steel HB450 Sloping front wall, with internal access steps 2-wing portal doors with PENDULUM FUNCTION/combination doors, pneumatic automatic release 2 grain slides with dust protection cover Reinforced roof cover HYVA tilting cylinder, Alpha type, suitable for high and low pressure ALU fifth wheel, full load capacity 2 air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE with starting aid WABCO trailer EBS with roll-over protection RSS WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss finish Aluminum access ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, it is also immediately available in a FULL-SERVICE rental package.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon High Capacity Stacker H1/J1” finishing machine Item for sale: 1 x Canon High Capacity Stacker H1/J1 Gsdpfx Agoz Ixzqo Ssuh Condition: This offer is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Compatible with various Canon imagePRESS models, including the C650/C750/C850, C710/C810/C910 and C8000VP/C10000VP. The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2015, functionality: fully functional, NAKAMURA NTJ-100, CNC turning and milling center with FANUC 31i-B control • C-axis on the left spindle • C-axis on the right spindle • Milling drive on the upper turret • Milling drive on the lower turret • B-axis on the upper turret +/-91° • Y-axis +/- 40 mm on the upper turret • Y-axis +/- 32.5 mm on the lower turret • Bar capacity left 42mm A2-5, 6000 rpm • Bar capacity right 42 mm A2-5, 6000 rpm • 12/24 + 6 stations under 45° turret, top • 12/24 stations turret, bottom • 90° inclined bed • Interface for bar loader magazine, Hommel • Air blow-out, right spindle • Drive power left, FANUC AC11/7.5kW • Drive power right, FANUC AC 11/7.5KW • Chuck pressure monitoring, right and left Guodpfx Aoz Iy Urog Soh • 19" touch monitor • Door lock • Clamping force control • Helical interpolation • NT-Nurse 2 • NT-Work navigator • Feed rate and rapid traverse adjustment switch • Transformer • CE marking • Memory capacity 2560 meters • Tool offset memory 99 items • Program management 2000 programs • Extended editor function • Background editor • Macro B • Direct input of drawing dimensions • G52-G59 • Polar coordinate interpolation • Cylindrical interpolation • Current documentation • Machine color RAL 9002, light gray • Door color RAL 7011, iron gray • Chip conveyor RAL 7024, graphite gray Machine options NTJ-100 Air and coolant blow-out through the right spindle Ø 65mm NTJ-100 Chuck blow-out, left spindle NTJ-100 Intelligent handwheel NTJ-100 Polygon turning function Manual tool probe, removable for left and right Workpiece unloading NTJ-100 Unloading with gripper hand on the upper turret for parts up to Ø 65 mm x length 150 mm / 3.0 kg NTJ-100 Material collection tray type A with enclosed collection box, left, for material remnants and finished part ejection, part size up to spindle bore 65 mm NTJ-100 enlarged main spindle, left, Ø 65 mm, spindle nose A6 NTJ-100 enlarged counter spindle, right, Ø 65 mm, spindle nose A6 Chip disposal Hinged belt chip conveyor for NTJ-100, discharge right. Manufacturer: AME. Color: RAL 7024. Motor right, in the direction of travel.

Condition: new, Year of construction: 2026, working width 630 mm workpiece width - max. 1,0 - 100 mm sandingbelt width 650 mm sandingbelt length 1900 mm dimensions 1320 x 2250 x 2200 mm weight of the machine ca. 2500 kg Description: Gedsz It Irepfx Ag Souh - Universal, compact entry-level machine for machining steel, stainless steel, and aluminum - The continuously adjustable sanding belt speed allows you to reliably remove cutting burrs and achieve a smooth surface finish - With our flap-disc unit, you can achieve uniform edge rounding on all sides and a non-directional finish - The speed-controlled rounding unit enables different rounding depths and optimal processing for every application - 150 mm wide magnetic track

Condition: used, maximum load weight: 34,500 kg, overall weight: 50,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2026, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low-bed/drop-deck trailer with full equipment First registration 05/2025, new vehicle Overall length 13,065 to 17,565 mm (single telescope 4,500 mm, extendable in 500 mm increments) Fifth wheel height 1,200 mm Length of drop-deck in normal position 6,650 mm Gusdpfx Ajz Iu U Hog Soh Length of drop-deck extended 11,150 mm Length of gooseneck 3,650 mm Length of rear axle bogie 2,765 mm Loading height on rear axle bogie only 845 mm LOADING HEIGHT OF DROP-DECK only approx. 300 mm (loaded) Total weight, technically 50,000 kg Fifth wheel load, technically up to 26,000 kg Axle load, technically 24,000 kg Unladen weight 15,500 kg Chassis with 3-layer paint finish Detachable gooseneck with external main frame Central lubrication system for front section and additionally 1x for rear section All axles hydraulically steered GIGANT axles with drum brakes WABCO trailer EBS with anti-roll system RSS WABCO Smartboard TRAILING AXLES with hydraulic suspension, lifting height 600 mm REMOTE CONTROL Tires 9x 245/70 R 17.5 Continental 24-volt electrical hydraulic system Overwidth package 10 pairs of folding load area extensions, 225 mm each 3 pairs of CONTAINER locking adapters for accommodating a 40 FT or a 20 FT container Side wall construction on fifth wheel platform Ramps for the drop-deck platform 5 pairs of swivel lashing eyes with a lashing force of 10,000 daN in the drop-deck 4 pairs of outrigger pockets in the outer frame 3 pairs of swivel lashing eyes on the rear section 1 pair of lashing eyes in the rear bumper, LC 6,000 daN RENTING is the new BUYING; with us, it is also available for rent or in a full-service lease – immediately available.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Gsdpsz Ii A Sefx Ag Ssuh Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 880 mm, travel distance Y-axis: 1,360 mm, travel distance Z-axis: 700 mm, table width: 1,110 mm, table length: 1,610 mm, overall weight: 12,500 kg, number of axes: 4, This 4-axis OPS INGERSOLL Gantry Eagle 1200 Plus was manufactured in 2014. It features a robust weight of 12,500 kg and includes a rotary tool changer magazine with multiple electrode holders. If you are looking to get high-quality die-sinking capabilities, consider the OPS INGERSOLL Gantry Eagle 1200 Plus machine we have for sale. Contact us for further details. - Control system: Eagle Powertec PC/NC Steuerung 3060 (22" Touchscreen display, Multiprog Powertec technology programming, Powertec 2 Easy Burn fast programming, Powertec Handheld, Ethernet and USB interfaces, MultiControl light remote maintenance)- Fine finishing generator: Eagle Powertec PT60- Z-axis speed: Eagle Power Jump with 18 m/min interval speed in Z-axis- Travel X / Y / Z: 880 x 1360 x 700 mm- Distance table / chuck min./max.: 440 / 1140 mm- Worktable dimensions: 1110 x 1610 mm (table clamping surface recessed 50 mm compared to standard)- Dielectric height: 960 mm (Option: 1000 mm)- Special telescopic working tank (W x L x H): 1140 x 1640 x 1040 mm- Max. head load: 300 kg- Additional dielectric fluid capacity: 2000 l (Total 4800 l with extra tank and connecting hoses)- Electrode changer: EW30 (30-fold) / 13-fold base unit- Measuring system: Linear measuring system in X and Y-axis (already included in Z-axis)- Electrode clamping system: Hirschmann H5000 / Minifix (H8.11.20)- Energy saving function: ECOTEC- Flushing: Programmable pressure flushing, manual suction connection- Filter system: 32 m² paper candle filter- Cooling: Compressor re-cooling unit- Main voltage: 400 V3~ / 50Hz- Control voltage: 24 VDC- Max. fuse: 32 A- Power consumption: 20 kVA- Total weight: approx. 12,500 kg (Machine base: 10,000 kg, Gantry/Portal: 2,500 kg, Extra tank: 1,100 kg)- Additional features: C-axis without chuck, CO2 fire extinguishing system, T-slot plate for large electrode mounting, machine shoes, preparation for external erosion mist extraction nozzle, fire damper, structural paint finish in Cobalt Blue (RAL5013), Telegrey (RAL7045), and Rape Yellow (RAL1021) Gujdjz Nhkljpfx Ag Ssh

Condition: used, Year of construction: 2015, Sandblasting system Sclick Gusdpez Nhv Usfx Ag Seh Schlick Surface Technology / Sandblasting systems Dimensions: 80 cm deep, 100 cm wide

Condition: excellent (used), Very rare option for the last model of the Accuriopress Inline Trimmer unit TU-510, in perfect condition. Basic function: 2-side slitting, 4-edge trimming, 4-edge trimming + 2-way slitting. Media weight: 50-400 gsm up to 487.7 mm, 128 – 300 gsm up to 1,300 mm* Media size: Min 140 x 153 mm, max. 330.2 x 1,300* mm (900 mm duplex mode) * Weight: 272 kg standard / 328 kg with all options JS-507 – Business Card Tray Kit Basic function: Enables business card cutting with a separate output tray. Standard finished size: 50 x 85 mm to 56 x 92 mm Standard number of cards: Trims 7 columns x 3 rows (21 cards per sheet) Output capacity: 420 Business Cards (depending on paper weight) MK-764 – Banner Paper Kit Basic function: Enables long-sheet feeding and page reversal during paper output. TU-504 – Centre Slit Kit Basic function: One- or two-line slitting. Paper weight: 128 to 300 gsm Media size before trimming: 1-line slitting Min 194 x 133 mm, Max 330.2 x 487.7 mm; 2-line slitting Min 271 x 133mm, Max 330.2 x 487.7 mm Gjdpjz Nygfefx Ag Souh Media size after trimming: 1-line slitting Min. 85 x 133 mm, Max. 161.1 x 487.7 mm; 2-line slitting Min. 85 x 133 mm, Max. 104.7 x 487.7 mm CR-102 Creasing Kit Basic function: Downward convex crease operation Number of creases: 1 to 5 Crease setting steps: 0.1 mm Minimum crease interval: 1 mm A first in the industry, the TU-510 cuts everything from small business cards to oversized long sheets. With both slitting and trimming capabilities, this new Konica Minolta finishing option produces full-bleed output. Its functionality can be extended with further accessories for creasing as well as full-bleed business card and postcard output. Via the connection with the IQ-501 Intelligent Quality Care unit, color consistency and registration accuracy are ensured for every printed sheet. Our intelligent trimmer even supports extra-long sheets, offering attractive opportunities for business expansion. At the same time, it helps save valuable operator time and thus reduces the cost of manual labor. As an experienced retailer of second-hand copiers, we have developed real expertise in packing and pallet shipping to guarantee that our customers receive machines in perfect condition. We ship copiers that come from, and are maintained by, Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries upon request.

Condition: new, functionality: fully functional, fuel type: electric, overall weight: 10,327 kg, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 123, Equipment: CE marking, adjustable boom, hydraulics, A. Paver Module Travel System: Power: 3kW motors × 2 (2 drive heads per side, totaling 4 motors) Working Width: 1.9m (single-pass coverage) Lifting System: Motorized screw lift: 0.75kW × 2 (2 sets per side for precise height control) Vibration System: 3KM high-frequency vibrators × 2 units (ensuring concrete compaction) Key Advantages: Multi-motor synchronous drive for smooth and efficient paving; integrated vibration and lifting for complex slope surfaces. Gjdpfxsz Izffj Ag Ssuh B. Finishing Machine Module Travel System: Power: 2.2kW motor × 1 (2 drive heads per side) Working Width: 1.9m (matched with the paver) Lifting System: Hinge-type lifting (manual/hydraulic adjustment for flexible slope adaptation) Finishing System: Finishing heads: 3kW motors × 2 (80cm working width, dual-head synchronized finishing) Motorized screw lift: 0.5kW × 2 (precise pressure control) Trolley device: 3kW motor × 1 (automatic transverse movement for efficiency) Key Advantages: Dual finishing heads for one-pass completion; automated trolley reduces labor intensity. C. Work Platform Modules any America Inc. Travel System: Power: 2.2kW motor × 1 (2 drive heads per side) Working Width: 1.9m (synchronized with the main machine) Lifting System: Hinge-type structure (quick height adjustment for manual repairs) Application: Provides a safe and stable platform for workers, complementing paving and finishing operations. D. Cutting machine (horizontal and vertical) E.100KW generator

Condition: new, Year of construction: 2026, CORMAK ESR 1300 x 2.5 Electromechanical Three-Roll Plate Rolling Machine The ESR 1300 x 2.5 electromechanical three-roll plate rolling machine with asymmetrical rollers is designed for producing cylindrical and conical shapes of various diameters. The machine is intended for bending sheet metal with a thickness of up to 2.5 mm and a working width of up to 1300 mm. The upper roller has a diameter of 90 mm. Three-roll plate bending machines from this series are particularly popular due to their relatively simple yet highly functional design. Main Advantages - Asymmetrical roller arrangement Gujdpemtwuysfx Ag Sjh - Motor-driven upper and lower rollers – both rollers are driven by an electric motor through a gear and chain drive system. - Bidirectional upper roller rotation – the upper roller rotates in both directions and features a swing-out mechanism. - Adjustable lower and side rollers – manually adjustable roller height. - Conical bending capability – allows the production of conical shapes. - Foot pedal controller with emergency stop button – provides convenient operation and enhanced operator safety. CORMAK ESR 1300 x 2.5 mm Sheet Metal Rolling Machine The chain drive system transfers rotational power from the electric motor to the rollers. The upper roller features a swing-out design, making it easier to remove finished workpieces after the rolling process. The swing-out roller is equipped with a locking mechanism that prevents accidental opening during operation. Technical Specifications Parameter Value Model ESR 1300 x 2.5 Maximum working width 1300 mm Maximum material thickness 2.5 mm Roller diameter 90 mm Motor power 1.5 kW Dimensions (L × W × H) 1800 × 640 × 1000 mm Approximate weight 600 kg (±2%) Standard Equipment - Foot pedal controller - User manual - CE Declaration of Conformity

Condition: used, Colour: Green Empty weight: 3.500 kg Price: On request - Transport weight [kg]: 3500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gedoz Ngv Hepfx Ag Sjuh Lukas van Rossum