Used contour edgebanders / moulded edgebanders for sale (11)

Condition: used, Year of construction: 1989, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Lredpjwwxykofx Abyjn Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Availability: short-term Location: Röllbach

Condition: excellent (used), SCM contura in excellent condition Lredpfst E T I Nsx Abysn

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Suitable for curved shaped edges Good condition, possible to test ! Lrjdpfszc Hxqsx Abyon

Condition: good (used), Year of construction: 2001, and Edgebanding Machine IMA HKA The IMA HKA Hand Edgebanding Machine is a versatile device for manually applying edge strips or veneer strips to flat workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The machine can be used both manually and with a processing table, providing high flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, they are available new and used in our shop. The HKA consists of two main components: 1. Handheld unit: Automatically feeds the edge strip, applies glue, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, temperature regulator, and various control elements. The handheld unit can be suspended on a balancer to facilitate operation. Operating Methods: • Guided workpiece: The handheld unit is mounted on the processing table, and the workpiece is manually moved. • Guided handheld unit: The workpiece is fixed with vacuum clamps, while the handheld unit is guided manually. Lodev N Nn Djpfx Abyjrn Technical Data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Edge strip feed: 20 - 50 mm • Power consumption: 2.6 kW • Vacuum pump capacity: 6 cbm/h • Minimum outer radius: Depending on the bending suitability of the edge material • Minimum inner radius: 150 mm, depending on material properties Optional Accessories: • Boom for attaching a balancer • Vacuum clamping table

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for profile strips and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, minimum internal radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable 4 – 9 m/min, 2.6 kW, 400 Volt. Lredpfx Abevf H I Tsysn Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Year of construction: 1998, condition: good (used), I sell the edge banding machine IMA HKA. Suitable for curved shaped edges Lrsdog Dvrijpfx Abyen Good condition, possible to test !

Condition: good (used), Year of construction: 2001, functionality: fully functional, IMA HKA manual edge banding machine in fully functional condition. Edge banding machine for shaped parts. Various pneumatic hoses have just been completely replaced. Edge thickness: 0.4 - 3 mm Board thickness: 16 - 45 mm Strip feed: 20 - 50 mm Power consumption: 2.6 kW Ljdpfjx H Un Aex Abyern Minimum outer radius: Dependent on the bending suitability of the edge material Minimum inner radius: 150 mm, depending on the material properties With gantry and spring tension Vacuum clamping table with 4 switchable zones Rollers, vacuum supports (plus additional new rubber sets) for the vacuum table #C1

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife Lrjdpjb A Ninofx Abyjn -Edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg

Condition: good (used), Year of construction: 1981, Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm Ledpfeb A Hfqsx Abyern -Weight: 60 kg

Condition: as good as new (ex-display), Year of construction: 2024, Contour edge banding machine up to 140 mm Work piece thickness, Speed from 2,5 - 12m/min, Quick change glue pot, Glue pot and glue roller teflon coated, Standby function, tilting machine table up to 45° and digital length counter. Ledpfx Aed Sb Dusbyorn Standard machine incl. the following options : →electropneumatic pre-melting unit for 2 Kg Cartridge →motorized driving mechanism (patented) →supporting bars with steel balls 67641340f3652

Condition: as good as new (ex-display), Year of construction: 2024, Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material →Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins. →Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min. →Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal →Pneumatic cutt-off unit capacity max. 3 x 30 mm Ledpfxsd Sb Dtj Abyjrn →Turntable D=600mm 67641341015f6