Used Star Micronics Sv-32 for sale (10,110)

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Njdpfx Abeuyk S As Uswl

Condition: excellent (used), JBS guide bush pressure system suitable for Star Ecas 32 Nwjdpfopl U Efox Ab Uol - on request the suitable maintenance unit can be delivered with it

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Nodpfxey A Tpqo Ab Uswl Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1840 mm Furnishing: Nwjdpfxexaakao Ab Ujl - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

Condition: used, each with 32 stations with divider plate suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm Nwsdpfx Ajzxrkveb Ujl max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm Nwsdeyvvmropfx Ab Ujl feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: ready for operation (used), Fanuc A06B-6127-H106 amplifier SV 180HV SN V11135364, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos Nodpfx Absx Ercuj Uewl

Condition: ready for operation (used), Fanuc A06B-6127-H209 amplifier SV 80/80HV SN V11119827, used, minor signs of wear, 100% fully functional, scope of delivery as shown in the photos. Nedpfxsx Erd Sj Ab Uowl

Condition: ready for operation (used), Fanuc A06B-6127-H209 amplifier SV 80/80HV SN V11345531, used, minor signs of wear, 100% functional, delivery as per photos. Nodjx Erfcepfx Ab Uswl

Condition: ready for operation (used), Fanuc A06B-6127-H110 amplifier SV 540HV SN V11446167, used, normal signs of wear, 100% fully functional, delivery as shown in the photos. Nwodpjx Erdljfx Ab Uel

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm Nwsdpfx Ajy S Arteb Uel 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Year of construction: 1983, condition: good (used), FGSV 32 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Parameters: Table 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Nedpfx Abeh Ir Rmo Uswl Speed ​​range 35-1800 rpm. Distance between spindle and table 140 - 590 mm. Distance between spindle and column 120 - 520 mm. Max. table load 500 kg. Main engine power 11 kW. The demand for a power of 15 kW. Dimensions: Length X Width X Height: 2735 X 2425 X 2475 mm. Weight 4200 kg.

Condition: used, Year of construction: 1996, Monobloc filling machine from the renowned manufacturer Krones – model VHK 032 / SV 08. This machine is designed for filling alcoholic beverages (vodka, liqueurs, still drinks) into glass bottles with aluminum ROPP closures. Technical data: Manufacturer: Krones (Germany) Year of production: 1996 Model: VHK 032 / SV 08 Machine type: monobloc (filling + capping) Output: approx. 10,000 bottles/h Filler: 32 valves (gravity system) Nwjdjyxv Ihopfx Ab Ujl Capper: 8 ROPP heads (aluminum, e.g. 28 mm) Technical condition: used machine, condition as shown in the photos, serviced and fully operational until end of production.

Condition: new, Bernardo Gear-Driven Pillar Drilling Machine GB 32 S Vario Technical Specifications • Drilling capacity max.: 32 mm • Tapping capacity max.: M22 • Drill chuck: 1 – 13 mm / B16 • Morse taper: MK 4 • Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm • Feed range: 0.06 / 0.12 / 0.18 mm/rev • Throat depth: 300 mm • Max. spindle to table distance: 670 mm • Spindle to base plate distance: 1285 mm • Quill stroke: 160 mm • Column diameter: 125 mm • Table size / T-slot size: 460 x 460 mm / 14 mm • Base working area: 420 x 340 mm • Motor output (S1 100%): 1.5 kW / 400 V • Motor input (S6 40%): 2.2 kW / 400 V • Machine dimensions (W x D x H): 540 x 900 x 2120 mm • Weight: approx. 360 kg Features • Infinitely variable speed control, ideal for adjusting the desired cutting speed • Machined base (420 x 340 mm) with integrated coolant pump • Integrated digital display for speed and drilling depth • Heavy-duty cast iron table with rotatable and tiltable work surface • Supplied as standard with 3 automatic spindle feeds • Guaranteed concentricity ≤ 0.02 mm measured in the quill • User-friendly membrane keypad operation • Standard with automatic quill feed and tapping device • Robust, ground steel column designed for heavy-duty use Scope of Delivery • Gear-driven drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 • Reducing sleeves MK 4 / 3, MK 3 / 2 • Delta VFD frequency converter • Automatic tool ejector • Coolant system Nwjdsx Agiuopfx Ab Ujl • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Condition: new, Year of construction: 2024, == Exhibition Machine == ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of a separate container (33 l), pump with motor protection switch, complete valve assembly) and LED machine light standard equipment: mushroom push button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch speed adjustment stepless, digital speed display, feed overload protection, protection class IP54, connecting plug spindle protection with electrical protection technical data: drilling capacity steel E335 (St 60) 40 mm thread cutting: steel E335 (St 60) M 24 cast iron EN-GJL-200 (GG20) M 30 short spindle MK 3 spindle stroke 120 mm overhang 293 mm column diameter 115 mm machine table, usable support area 514 x 360 mm T-slots, number x width x spacing 2 x 14 x 224 mm Nodpfx Asd Hy Elsb Uswl distance spindle-table min./max. 117/701 mm feed 0.10 + 0.20 mm/rev machine height without options approx. 1840 mm net weight approx. 285 kg drive stepless motor 1500 / 3000 rpm power 1.45 / 1.9 kW spindle speed 160-2250 rpm

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting Nwsdpjgp Dyxefx Ab Usl

Condition: new, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, table load: 10,000 kg, position of the milling head: Vertikal, workpiece weight (max.): 10,000 kg, torque: 1,392 Nm, overall weight: 30,000 kg, spindle nose: SK 50 - DIN 69871/A, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, The STARVISION DX 3220 impresses with its robust portal design, powerful drives, and high-quality components. It offers high precision, rigidity, and reliable machining – even for demanding machining tasks. Ideally suited for mold making, machine construction, and contract manufacturing. Your advantages: ✔ Installation and commissioning in Germany included ✔ Service and spare parts directly from JMT ✔ Financing and leasing options available ✔ 24 months warranty Technical equipment: Control: HEIDENHAIN TNC 7 CNC path control HEIDENHAIN TFT screen 19" Nwsdpfshy Avpex Ab Uel HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (ICS) 70 bar Tool changer (ATC): 60-position chain magazine with dual gripper Chip conveyor systems: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Rotary table: Preparation for 4th axis (rotary table) Enclosure: Full enclosure, closed at the top (including roof) Accuracy: Positioning accuracy: ± 0.035 mm Repeatability: ± 0.028 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: good (used), Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutters: indexable insert end mills with internal cooling, 8 pieces -Receptacle: Ø 32 mm -Diameter: 32 to 43 mm, see photos / parts list -Levy/Price: complete Njdpfxork S Dqe Ab Uowl -Transport dimensions: 400/200/H60 mm -Weight: 8.7kg

Condition: good (used), End mill, shank mill, milling cutter -Six-cutter -Finishing cutter -Diameter: 32 mm -Usable length: 200 mm Nedpfob A Rbasx Ab Uewl -Type: HSSE N30 -Quantity: 9 pieces -Sale: only complete set -Weight: 12 kg

Condition: good (used), End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces Njdpfxeb A Rbfj Ab Uewl -Sale: only complete set -Weight: 10 kg

Condition: refurbished (used), machine/vehicle number: 4507, Rectificadora sin centros ESTARTA 327 CNC Njdpfx Abog Ix Hmj Uswl

Condition: used, TECHNICAL INFORMATION: Grinding wheel dimensions (h x w x d x w) Ø610 x Ø304,8 x 254 mm Ø min/max to be ground 1,5 / 125 mm Width of regulating grinding wheel 254 mm Number of regulating wheel speeds infinite Diamond speed 225 min1 Plunge (auto/manual) 254 mm Grinding wheel dimensions (h x w x d x w) Ø355 x Ø203,2 x 254 mm Width of the grinding wheel 254 mm Maximum length to be ground in plongeé 254 mm Motor power of grinding wheel head 30 kW Hydraulic motor power 0,37 kW Length 5.175 mm Width 2.950 mm Nsdpjhzvk Eofx Ab Ujwl Weight 8.375 kg

Condition: refurbished (used), GENERAL CHARACTERISTICS Ø min / max to grinding 3 / 200 mm Maximum Infeed grinding length 500 mm Ø Grinding Wheel Dimensions (OD x ID x width) Ø 650 x Ø 304,8 x 500mm Grinding wheel width 500 mm Regulating wheel width 500 mm Regulating wheel speed nº Infinitas Min/max Regulating wheel speed (r.p.m.) 10 / 255 r.p.m. Dressing (Auto/Manual) Automático / Automatic Diamond dressing speed 255 r.p.m. Lubrication (Auto/Manual) Automático / Automatic Control type ((CNC/Manual) CNC CNC Brand FANUC CNC Model Oi - TF Infeed (auto/manual) Automático / Automatic Regulating Wheel Dimensions (OD x ID x width) Ø 350 x Ø 203,2 x 500mm ELECTRICAL CHARACTERISTICS Motor power grinding wheelhead 55 Kw Power hydraulic motor 3 Kw Total Power 60 Kw Voltage 220/380V DIMENSIONS AND WEIGHTS High 2.100 mm Long 2.300 mm Weight 15.000 Kg Width 2.800 mm OTHER FEATURES Accessories Included * Portarreglas de pasante, Polipasto de 1000Kg, Carenado, CE | Throughfeed work rest, block and tackle for 1.000kg, Machine casing, CE Year 1991 Nwjdpfxsd I Um Rs Ab Uol Serial Nº 765142

Condition: refurbished (used), GENERAL CHARACTERISTICS Ø Grinding Wheel Dimensions (OD x ID x width) 508 x 304,8 x 254 mm Grinding wheel width 254 mm Regulating wheel width 254 mm Regulating wheel speed nº infinitas Min/max Regulating wheel speed (r.p.m.) 10/250 r.p.m. Dressing (Auto/Manual) Manual Lubrication (Auto/Manual) Automático / Automatic Control type ((CNC/Manual) CNC CNC Brand FANUC CNC Model Oi Mate - TD Regulating Wheel Dimensions (OD x ID x width) 305 x 190,5 x 254 mm ELECTRICAL CHARACTERISTICS Power hydraulic motor 0,55 kW Total Power 27 kW Voltage 220/380 V DIMENSIONS AND WEIGHTS High 1.900 mm Long 2.300 mm Nodpfx Abod Naktj Uewl Weight 6.420 kg Width 1.885 mm

Condition: refurbished (used), GENERAL CHARACTERISTICS Ø min / max to grinding 2/150 mm Nwjdjd Nakvepfx Ab Usl Maximum Infeed grinding length 355 mm Ø Grinding Wheel Dimensions (OD x ID x width) Ø610 x Ø304,8 x 355 mm Grinding wheel width 355 mm Regulating wheel width 177,5 mm Regulating wheel speed nº infinitas Min/max Regulating wheel speed (r.p.m.) 10/225 r.p.m. Control type ((CNC/Manual) CNC CNC Brand FANUC Regulating Wheel Dimensions (OD x ID x width) Ø350 x Ø203,2 x177,5 mm ELECTRICAL CHARACTERISTICS Coolant system motor power 0,70 Kw. Motor power grinding wheelhead 37 Kw. Total Power 45 Kw. Voltage 220/380 Kw. DIMENSIONS AND WEIGHTS Weight 14.000 Kg