Used 3 Wrappers + 1 Baler for sale (1,02,156)

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) Fgsdpfx Aeg N Db Hem Tod 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Fgedpfjxpqz Uox Am Ted Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: good (used), mileage: 8,12,271 km, power: 320 kW (435.08 HP), first registration: 08/2015, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,170 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2015, Equipment: AdBlue, central locking, cruise control, parking air conditioner, parking heater, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Rear working lights - Front working lights - Heated mirrors - Leaf suspension - Roof spoiler - Windscreen - Cab - Air suspension - Sleeper cab - Auxiliary heater = Notes = Daf XF440 SuperSpaceCab 6x2*4 - Cuppers 1-2-3 deck Livestock + Cuppers 3 deck trailer 2009 MY: 13-8-2015 / 18-2-2009 KM: 812271 XLRASH4100G073990 / XL9VA101092053008 76-BGG-7 / 83-WD-LH APK/TUV: 24 DAF XF440 6x2*4 SSC 76-BGG-7 812,200 km Alcoas Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 Fgedeymaqnjpfx Am Tjd Cupper 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swinging floorboards Folding roof 3 decks Fans Remote control release = Further Information = Technical details Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: air suspension Rear axle 2: Tyre size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: air suspension Weights Unladen weight: 14,507 kg Payload: 13,493 kg Gross vehicle weight: 28,000 kg Functional Body brand: ZF Maintenance, history, and condition APK (MOT/TUV): valid until 08.2026 Technical condition: good Visual condition: good Identification Registration number: 76-BGG-7 Further information For more information, please contact VAEX The Truck Traders.

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, Fgsdpfogynw Dex Am Tjd 2; 2S; 3; 3S; 6 and UC200/400

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 1,200 mm, total width: 700 mm, total height: 2,000 mm, shelf length: 1,200 mm, load capacity per storage section: 140 kg, frame height: 2,000 mm, Equipment: double-sided, Used shelving. Modular, boltless shelving unit in very good technical condition. Galvanized shelf unit warehouse number: #77 METALSISTEM Fjdpfx Amevnzmcj Togd Dimensions relevant to the price offer: - Frame/upright height up to 200 cm (we also have 250 cm height available) - Depth: 70 cm - Shelf width: 120 cm - Maximum shelf load: 150 kg with 4 shelves per section - For racks with fewer than 3 sections, shelf load capacity is 100 kg per shelf - Shelf adjustment every 5 cm The given price is for 1 add-on set to attach to the next section: 1 set includes: 1 upright/frame/side + 4 shelves To create a free-standing rack, 2 sets are required Section dimensions: Width – 120 cm Height – 200 cm Depth – 70 cm Shelf dimensions: Width – 120 cm Depth – 70 cm Approx. 2100 meters of this racking in stock Please browse our other listings for warehouse shelving

Condition: ready for operation (used), Size: max 750 x 1.050 mm min 40 x 75 mm section height: max 165 mm Stroke height :1.300 mm lifting capacity: 200 kg Power requirements: 3,1 kW (220/380V, 50Hz) Width: 1.425 mm Depth: 2.970 mm Fgedped N D Nvofx Am Tsd Weight: 850 kg (approx.)

Condition: used, Year of construction: 1988, spindle diameter 90 mm x-travel 2000 mm y-travel 1250 mm z-travel 1250 mm spindle turning speed range 8-1600 U/min spindle stroke 720 mm Feed 1-2500 mm/U weight of the machine ca. 9,1 t 31881-07/9 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Fgsdpjyutqkofx Am Tjd Your Markus Hirsch Team

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2011, tire size: 385/55/22.5, Year of construction: 2011, Lifting roof Fjdjyxw A Tjpfx Am Tegd Separate floor/two-cylinder system Independent operation Remote control = Further information = Tyre size: 385/55/22.5 Rear axle 1: Steered; Tyre tread left: 65%; Tyre tread right: 65% Rear axle 2: Tyre tread left: 65%; Tyre tread right: 65% Unladen weight: 10,800 kg Technical condition: very good Visual condition: very good

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Already disassembled without power (currently likely without PSU, but a PSU may be available). Inspection welcome north of Flensburg. Fsdpfjyt Rmgox Am Togd B2B sale only.

Condition: excellent (used), Used boltless shelving units Upright type S3 Fgsdpexxdkuefx Am Tod Height: approx. 446 cm (can also be shortened) Depth: 50 cm Longitudinal beams type S1 Length: 150 cm Double-section shelves: 90 cm + 60 cm Price applies to 11 uprights and 100 shelves, making 15m of racking Multiple sets available Delivery possible

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Fgedjtylpijpfx Am Tsd

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Fgedpfx Ajtylpcem Ted

Condition: ready for operation (used), A filling machine Ammann used in the dairy industry is available. Cup diameter: 95mm, cup height: 122mm. Including filling heads and various accessories. Documentation available. An on-site inspection is possible. Fgjdpfsxuvpzjx Am Ted

Condition: excellent (used), Tool milling machine DECKEL FP 1, three-axis digital readout TNC 113, from educational institution Fsdpfx Aeyln Irjm Tsgd - CE marking - Travel X / Y / Z 300x160x340 mm - Heidenhain TNC 113 / plug-in control - Spindle speed range 40 - 2000 rpm - Infinitely variable feed in all three axes - Rapid traverse in all three axes - Vertical head adjustable by 100 mm - Vertical-horizontal milling facility - Tool holder ISO 40 - Drive power 1.5 / 1.9 kW - Fixed angle table - Chip tray - Coolant system - Work light - Documentation Dimensions: LxWxH 1.3x1.2x1.7 m / Weight: 950 kg Errors and omissions excepted

Condition: new, empty load weight: 2,050 kg, maximum load weight: 650 kg, overall weight: 2,700 kg, loading space length: 5,600 mm, loading space width: 2,170 mm, loading space height: 2,100 mm, tire size: 195/55R10C, Large toilet trailer with aesthetic furnishings. A toilet trailer is often essential for a party, town festival, street party, company celebration or other outdoor event. We have set ourselves the task of helping here and have developed inexpensive car trailers with toilets. A visually appealing interior design is important to us for a toilet trailer in addition to good equipment. The car trailer is divided into two rooms for men and women. The lighting, heating and flow heater are operated via the power connection. Wall-mounted toilets with built-in cisterns and concealed pipes create a pleasant ambience. There is a fresh water supply and the gray water disposal runs via a sewer. The entrance to the portable toilet is a wide staircase that can be folded down and has lifting aids. The rest of the side wall is then folded upwards as weather protection. Swing-out handrails provide safety. Two entrance doors protect against wind and weather. The staircase is illuminated with an LED strip. The standard equipment in the ladies' area consists of Fedpfsuh Rzqex Am Togd three lockable cubicles with wall-hung toilet bowls, built-in cistern and toilet roll holder. The actual room has a heater, drain for internal cleaning, PVC on the floor, washbasin with vanity unit and instantaneous water heater, mirror, LED lighting, roof vent with mosquito net and blackout blind, light switch and socket. There is only one cabin in the men's area, which is equipped in the same way as the cabin on the ladies' side. The basic equipment is also the same. There are also four wall-mounted urinals with touchless sensors. The general equipment of the box trailer with toilet equipment is a 50mm insulated sandwich body in silver on the outside, white on the inside, insulated floor, supply flaps on the left for the technical equipment, power socket for 230V, distribution box with FI, fresh water access, outlet for drain pipe, four stable crank supports, very stable frame and V-drawbar hot-dip galvanized. Further technical details can be found below. We offer 100km/h shock absorbers, anti-theft devices and drawbar boxes as accessories for our toilet vehicles.

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures Fodpfxjvylhbs Am Tegd GDR3 H12 Motor ZBR100 B4 B050

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports Fgsdpfjtx Nwnsx Am Tod * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) Fgedeyhkqnepfx Am Ted * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Condition: excellent (used), 1 unit fully automatic pallet wrapper with film pre-stretch Inv. no. 3703 Manufacturer: Matco Model: A 718 L-PREA * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1800 mm * Max. wrapping height: approx. 2700 mm * Own weight: approx. 500 kg * For Euro pallets and block pallets!!! * In very good condition Fgsdpsyb A Urjfx Am Tjd

Condition: used, axle configuration: > 3 axles, first registration: 06/2010, color: red, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Lift axle Fsdpfxjuu Dgho Am Tjgd - Central lubrication = Further information = Price: On request

Condition: excellent (used), PISTON PUMP KING 3/1 HIGH-FLOX INOX GRACO, ON GROUND SUPPORT REF. 243748 - Brand: GRACO - Reference: 243748 - Paint circulating, high flow rate Fgodpfx Amsh Tx I Hj Tsd - General industry, automotive - Second hand product totally revised - 1 year warranty. - VAT not included

Condition: excellent (used), For sale is a Rietschle CLFT 81 DV vacuum-pressure pump from a renowned German manufacturer. This is a dry-running rotary vane pump designed for simultaneously generating vacuum and compressed air. It finds application in packaging machines, printing machines, woodworking machines, CNC machines, pneumatic conveying systems, and many other industrial installations. The unit is equipped with a three-phase motor with a power of 3.0 kW and is mounted on a robust, compact frame. Technical data: Manufacturer: Rietschle Model: CLFT 81 DV (13) Year of manufacture: 1991 Country of manufacture: Germany Type: vacuum-pressure pump (dry-running, rotary vane) Capacity: 80 m³/h (50 Hz) Maximum overpressure: 0.5 bar Motor power: 3.0 kW Rotational speed: 1450 rpm Fsdpfxeziw Rps Am Tegd Power supply: 3×380 V Continuous operation: S1 Serial number: 1375434 Application: packaging machines, CNC machine tools, woodworking industry, printing industry, pneumatic conveying, equipment requiring vacuum or compressed air. Condition: Used. Visual condition as shown in the photos. Robust construction, ready for further operation.

Condition: new, Sample configuration: 2x 12m worktable 20kW Raycus fiber laser source Boci BLT461T+AB rotary axis FSCUT 9200 system HL-20000 water chiller Yaskawa servomotor Fgedswxvl Tepfx Am Tod Optional: air compressor

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000 kg / 2000 kg LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit. Fgodpfx Aezk Rdxjm Tsd

Condition: excellent (used), functionality: fully functional, load capacity: 1,250 kg, 3-axis welding positioner, height-adjustable Fedpfx Amezk Rbqj Tsgd 1250 kg load capacity Very good condition Includes accessories: hand-held and foot-operated remote control See video.