Used Ctx 650 Ecoline for sale (3,247)

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Controlled by Siemens Year of manufacture: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm Including the following accessories: Sliding guard 12-position turret with 6 driven tool stations Tool measurement in the working area 3-jaw chuck, hydraulic, SMW Autoblock 0, 315 mm Foot switch for chuck, foot switch for tailstock Various tool holders VDI 40 Various sets of top jaws Various turning tools Signal lamp, 4-color Tailstock with quill Fjdpfxszd Dczo Am Tjgd Chip conveyor with coolant tank 4 machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, DMG MORI Horizontal Turning Machine CTX -310V3 ecoline - Year 2010 Controller : MAPPS (Mitsubishi) Max swing dia.330mm Fjdex Ty S Tspfx Am Tsgd Max swing over slide dia. 260mm Max. Turn dia. 200mm Length 450mm Chuck 8" Turret 12 (6 driven tools) C axis indexing Power driven Tools 4,500rpm Tool setter tail Stock Chip conveyor --- Video upon request

Condition: excellent (used), Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, Control: Siemens 840 D Country of origin: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan), 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL DATA CTX 310 ecoline V1/V3 New Design Working range - Max. swing over bed: 330 mm - Max. swing over cross slide (X-axis): 260 mm - Max. turning diameter: Ø 200 mm - Chuck diameter: Ø 210 mm - X-axis travel: 182.5 mm - Z-axis travel: 455 mm - Centre height: 190 mm - Distance between centres: 581 mm Feed drives - Rapid traverse speed X/Z: 30 m/min - Control: Siemens Sinumerik 840D Slim Line - C-axis with Siemens control - Speed: 0 – 100 rpm - Torque: 112 Nm - Accuracy: < 0.04° Fgjdoxdiarspfx Am Tjd Spindle - Spindle nose: 140 h5 mm - Front bearing inner diameter: 100 mm - Spindle bore: Ø 74.3 mm - Max. bar capacity: 51 mm - Main drive with Siemens control - Drive power (40% / 100% DC): 16.5 / 11 kW - Torque (40% / 100% DC): 166.5 / 112 Nm - Max. spindle speed: 5000 rpm Turret - Number of tool stations: 12 - Tool holder: DIN69880 (VDI 3425) - Shank diameter: 30 mm - Tool change (with indexing lock): 0.95 s - Tool change (without indexing lock): 0.4 s - Turret with Siemens control - Number of driven tools: 12 - Drive power (40% DC) at 4000 rpm: 8.4 kW - Torque (40%): 20 Nm - Max. speed: 4500 rpm Tailstock - Automatic stroke: 396 mm - Quill type: flange-mounted - Max. quill axial force: 400 daN Hydraulic unit - Tank capacity: 50 l - Max. pressure: 50 bar Cooling system - Tank capacity: 175 l - Capacity with conveyor: 200 l - Pump power: 0.85 kW - Pump output at 5 bar: 30 l/min Electrical connection - Max. power: 21 kVA - Voltage: 400V - Frequency: 50–60 Hz - Fuses: 33 A Pneumatics - Compressed air connection: 6 bar

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: Fedpfx Amozadr No Togd - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Year of construction: 2013, condition: used, machine/vehicle number: 6012, Etikettiergerät / Labeling machine EcoLine 100-XSR Baujahr / Year 2013 - Serial-No. 6012 Durchlassbreite / bandwidth 100mm Stoppgenauigkeit / stopping accuracy +/- 0.5mm Etikettenlänge / label length min. 10mm Etikettenbreite / label width min. 10mm Innen-Durchmesser Etikettenrolle / Inside diameter of label roll 40/76mm Aussen-Durchmesser Etikettenrolle / Outer diameter of label roll 300mm Netzspannung / Voltage 115/230V, 50/60Hz Leistungsaufnahme / power consumption 400 VA Zertifizierung / Certification CE IP-Schutz IP44 (optional IP54) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fgsdolgz U Sjpfx Am Tjd

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Fgodpovvkipofx Am Tsd

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Fsdpfx Aowhqprom Tsgd

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Fgodpjwhqplofx Am Tod

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Fedpfx Aexyafkom Tsgd Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: good (used), The scope of delivery includes: Fgsdpfx Asi Eu Dvsm Tjd 1x partition panel, used Material color: gray-white Overall length: approx. 775 mm Tube length: 650 mm + 5 mm plastic cap Cross-section: square tube 20 x 20 mm Opening dimension: approx. 103 mm Weight: 0.93 kg | per piece

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Fodpskn Rz Hjfx Am Tjgd Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: used, Manufacturer: HERAEUS Model: RL 250 Internal dimensions: Diameter: 315 mm Fgedpjy Nlcvefx Am Ted Depth: 450 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, Model Year: 2000 Width: 700 Fsdpfx Amex T Dipj Tegd Length: 400 Height: 500 Number of Axes: 5 Holder: BBT40 Spindle Speed (RPM): 20,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2000, functionality: fully functional, Model Year: 2000 Width: 700 Length: 400 Fgjdpsx Uphmofx Am Tod Height: 500 Number of Axes: 5 Holder: BBT40 Spindle Speed (RPM): 20,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Year of construction: 2022, condition: used, Number of sanding units 6 st. Sanding height max. 120 mm output 12 kw Fjdpfeynnttsx Am Tjgd

Condition: used, Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Diameter of rotation: max. 465 mm Length of rotation: 1050 mm Diameter when turning: 680 mm Diameter of the chuck: 325 mm Travel x: 300 mm Travel z: 1050 mm Control: Fanuk Series 21I-TB Speed range: Max 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Diameter of the bearing in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Fsdpfx Aov Epzvom Tsgd Pin stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40

Condition: new, 🧰 Product Features • Condition: new • Color: gray • Volume: 650 l • Load capacity: 4000 kg (at 5°C room temperature) • Weight: 43 kg • Length: 120 cm • Width: 100 cm • Height: 78 cm Fgodpfx Ashvrk Tjm Tod • Stackable: Yes • Dimensionally stable: Yes • Special features: suitable for racking, liquid-tight, drain valve possible 💰 Price €155.00 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment We continuously stock over 5,000 linear meters of pallet racking from numerous manufacturers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions, all prices exclude VAT, ex warehouse.)

Condition: used, CTX Toastmaster Z55 conveyorised pizza oven stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control Fedpfx Amjdmn D Ue Tsgd

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, container length: 20 ft, color: blue, machine/vehicle number: 022499722, Equipment: bathroom, hot water, lighting, shower, Equipment: 6 pcs. wall reinforcement 2 pcs. sanitary windows with tilt fittings Parapet height: 1,525 mm above finished floor level (FFL) Frame external dimension: 652 x 714 mm Clear window opening: 590 x 528 mm Insulating glazing with gas fill 1 pc. steel external door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm Outward opening 1 pc. door stopper Partitions: 2 m interior partition wall Without insulation Coated steel sheet, 0.5 mm, color: white (approx. RAL 9010) 1 pc. internal door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm 5 m WC partition wall 3 pcs. WC partition doors, 625 x 2,000 mm Fjdjyyw R Hopfx Am Tsgd Electrical Equipment: 3 pcs. single socket outlet 1 pc. single socket outlet, 350 mm above finished floor level (FFL) 1 pc. double switch 1 pc. double switch Moisture-proof electrical installation 1,150 mm above finished floor level (FFL) Sanitary Equipment: 2 pcs. ceramic hand basins, 500 x 410 mm Incl. single-lever mixer tap Incl. metal mirror Incl. metal hooks Incl. soap dish 3 pcs. WC cubicles incl. toilet and toilet paper holder 2 pcs. floor drains 2 pcs. GRP shower cabins Incl. single-lever mixer tap Incl. shower curtain 1 pc. 300-liter boiler 1 pc. pressure reducing valve 1'' Heating, Ventilation, Cooling Equipment: 3 pcs. exhaust fans, 170 m³ 2 pcs. 2 kW fan heaters

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Fgedpfxezf H Nms Am Ted Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, travel distance W-axis: 500 mm, number of slots in tool magazine: 54, TECHNICAL DETAILS Type: CNC EDM drilling machine Travel in X-axis: 600 mm Travel in Y-axis: 500 mm Travel in Z-axis: 755 mm Travel in W-axis: 500 mm W-axis type: Servomotor Electrode length: 800 mm Drilling diameter: from 0.10 mm Fgsdpfxszhnige Am Tod MACHINE DETAILS Width: 1,975 mm Depth: 1,445 mm Height: 2,280 mm Height: max. 2,785 mm EQUIPMENT Electric changer with 18 stations Electric changer with 36 stations Automatic electrode and guide changer Breakthrough detection CAD import with intuitive touch operation Detection of holes by color code Automatic wear compensation Blind hole machining with depth control 3-stage discharge control Thread erosion for hardened materials M3 - M16 Generator power booster for large diameters Indexing axes, 1- and 2-axis available Large water tank with 175 l and filter system Drilling depth measurement Automatic electrode control

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Fgodpevk T S Aofx Am Tsd Tailstock

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL duo 3660/650 tech Year: 2025 Control: CC300 Integrated robot: ENGEL VIPER 40 Clamping force: 650 t Injection unit: 810 Screw diameter: 80 mm Possible screw diameters: 55 / 60 / 70 / 80 mm Shot volume: 1810 cm³ Injection capacity: 1660 g PS Injection pressure: 1800 bar (max. 2000 bar) Injection speed: 493 cm³/s Screw stroke: 510 mm Screw torque: 3600 Nm Max. screw speed: 210 rpm Plasticising rate: up to 118 g/s Nozzle orifice: 12 mm Tie bar distance (H x V): 1110 x 960 mm Fgjdoza Au Nopfx Am Tjd Platen size (H x V): 1510 x 1440 mm Opening stroke: 1800 mm Max. daylight opening: 1950 mm Mould height min./max.: 350 - 1200 mm Dry cycle: 2.8 s Ejector stroke: 250 mm Ejector force: 105 / 51 kN Installed drive power: 74 kW Oil tank capacity: 750 l Equipment: * ENGEL VIPER 40 integrated robot * 2-fold hydraulic core pull on moving platen * Tool heating with 32 control circuits * Hydraulic machine

Condition: used, machine/vehicle number: 008477, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Fgjdpey Hq Nvefx Am Tod Operating Units: 7 nr

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Fgsdpfx Amsv Sf I Eo Tod Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr