Used Arbor The Arbor Destacking Device for sale (14,614)

Condition: good (used), Measuring device for µA -30 m² to 750 m² Ibedsb A N R Rspfx Aiyob -approx. 1000 ohms to 5000 ohms -Dimensions: 200/90/H265 mm -Weight: 3 kg

Condition: excellent (used), Stäubli robot RX 60B LCR with control unit and handheld device Here we offer a Stäubli robot RX 60B with control unit. Robot: Stäubli robot RX 60B LCR Lifting capacity (nominal load - kg): 2.5 kg Weight: 46 kg Ibodezdytvspfx Aiyob Type: RX60B LCR / F04/50R7E1/A/01 Control unit: Stäubli CS8 RX60B LCR 3X400V - 50/60 Hz - 3000VA Weight: 170 kg Type: CS8 RX60BLCR / F06/546XA1/C/01 Handheld device: Stäubli SP1 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Peak height: 870 mm Ijdpfx Aoxm Sqreiysbb -Speed: electrically continuously variable 0-3 rpm -Drive: Servo motor 1/1.6 kW with cooling, see photo of nameplate -Direction of rotation: Right/left rotation -Axles: 1 piece -tiltable: No -Height adjustment: No -Transport dimensions: 3890/900/H1420 mm -Weight: 880 kg

Condition: used, cutting range for steel to 0,5 - 120 mm capacity at 100% 440 A mm cutting medium PerCut 451 dimensions ca. 1030 x 680 x 1450 mm weight ca. 600 kg water cooling unit KWE 360 control PGC Contour Cut Ijdpfx Ajzginhoiysbb Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the material The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means considerably higher flexibility. The inverter technology allows the highest marking quality and functionality. The HiFocus 440i neo is ideally suited for steel service centers, steel producers and distributors because it can be combined with 2D or 3D CNC-controlled guiding systems like gas cutting machines, robots and pipe cutting machines. With HiFocus neo the user benefits, compared to competitors, from higher speeds when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to optimised technology, the consumables are handled gently and the plasma cutting process is more efficient

Condition: good (used), Pipe heating device, pipe burner, pipeline construction burner -Max. diameter: 250 mm -Burner for steel pipeline construction -Propane -Transport crate Iedpsb A Ix Sofx Aiyebb -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Condition: good (used), Inert gas welding device, inert gas device -Max. Welding power: 340 A. Isdpfx Aisb Hiy Sjyjbb -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Condition: good (used), Weiss Umwelttechnik GmbH Salt spray chamber / corrosion test chamber Used salt spray chamber Weiss SC/KWT 450 for corrosion, salt spray, and condensation water tests according to common industry standards. The system is suitable for material testing, coating testing, and quality assurance. Technical data: Ibsdpszd Az Ajfx Aiyjb Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Salt spray test up to +50 °C Condensation water test up to +45 °C Humidifier up to +75 °C Power connection: 230 V / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment: Control unit Test chamber with sample holders Brine supply system Documentation / Service manual Accessories as shown in the pictures Scope of delivery Salt spray chamber Weiss SC/KWT 450 Documentation Accessories as shown in the pictures Condition Used, optical condition as shown in the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Ijdpfxjzi A Ele Aiyobb Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm

Condition: used, Year of construction: 1972, Hand clamps / clamping devices for band saw blades Meinert PH6D Ibjdpfszl N N Aex Aiyjb immediately available – fully functional Location: Austria, near St. Pölten

Condition: new, machine/vehicle number: 111208990B, Binding speed: 300 bindings/hour Paper format: DIN A4 Cover spine width: 3.5 - 28 mm Binding capacity: max. 280 pages (80 g / m²) Isdpfx Aish Eiayeyjbb Equipment / Additional information: 11 packages of materials

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: Ibedpfx Aiop Stgnjyob - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device Iodopix Nkepfx Aiyjbb -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete -Overall dimensions: 500/300/H170 mm -Weight: 34.4 kg

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 0000071163, Type: ALPHA20 HOR Ibedpfeunv Rxox Aiysb Equipment / Additional information: With tank Refix DE (Fabr. No.: 15 P 0316 90633)

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Iodpfxeib H U Ds Aiyjbb Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Documentation and wiring diagrams are available

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. Ibodjh Aw Rnspfx Aiyeb It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: good (used), Device tester, power supply Isdecdlt Sopfx Aiysbb -For: 15V devices -Measuring range -Measuring current: max. 300 mV -Dimensions: 250/260/H120 mm -Weight: 1.9 kg

Condition: good (used), Waste oil collection device, mobile oil collection container Iedpfx Aisb A Hdxeysbb -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

Condition: used, Year of construction: 1984, Vacuum filling machine, vacuum filler, sausage filling machine, dividing and twisting device -Handover: in its current condition as inspected -Process: Filling-Portioning-Twisting-Hanging -Program control: -Turning gear: -Turning nozzle: Ø 10 x 400 mm -Dimensions: 3400/1000/H1500 mm Ijdpfx Aob A Il Heiyebb -Weight: 860 kg

Condition: used, Built-in control unit, control cassette -Type: BUS6-E-SM-0012-A011-0000 Article No.: 222548 Ibjdpob A I A Ajfx Aiyjb -No.: S96317921 G -Number: 9 devices available Price: per piece -Weight: 1.45 kg

Condition: used, Technical details: width: 655 mm Iodpfx Aiou N D Sneysbb depth: 500 mm height: 500 mm weight of the machine ca.: 197 kg dimension L-W-H: 420 x 655 x 500 mm model: angular frame with double stiffness vertical plate: - size W: 655 x H 500 x thickness: 40mm - with clamping holes, long holes and center hole foot plate: - size: B:655 x L:420 x thickness : 40mm - with long holes *

Condition: used, Technical details: width: 700 mm depth: 600 mm height: 910 mm weight of the machine ca.: 440 kg dimension L-W-H: T: 600 x B: 700 x H: 910 mm Steel plate welded, 80mm thick, with stiffener Ibedou N Eatjpfx Aiyeb surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Clamping surface foot: L: 600mm x W: 700mm, 7x clamping hole *

Condition: used, Technical details: width: 350 mm depth: 120 ohne Platte mm height: 315 o.Platte mm 3 pieces available with base plate (A+B+C) 1 piece available without base plate (D) Dimensions of the base plate: W: 350 x D: 320 x Thickness: 30mm * Iodpfju N Eczjx Aiyobb

Condition: used, Technical details: width: 200 mm depth: 300 mm height: 500 mm weight of the machine ca.: 38 pro Winkel kg 2 pieces available ( price per piece) Ibodpfx Aisu N Ec Usyeb *

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm Ibedpfx Aiou Nlg Toyjb - chuck key - 2 pieces groove stone *

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg Ibjdpfx Aeu Nw Hleiyjb OSMOSIS PLANT *