Used Banner Q85Vr3Dl-T9-B for sale (39,161)

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. - taken out of running machine - fully functionalmanufacturer: B&R type: 1022 Rcedjp Rb Iajpfx Agueb manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: überholt

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Gross vehicle weight: 49,500 kg / 31,500 kg Fifth-wheel load: 18,000 kg Axle load: 31,500 kg / 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin trailing radius (rearwards) approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross vehicle weight depending on fifth-wheel load: Yes Special permit is required for exceeding country-specific regulations. Technical Description Gooseneck: Gooseneck in SNT Design for optimized loading platform length, length approx. 3,900 mm, rear with chamfer approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading platform: Loading platform, length approx. 9,600 mm with rear chamfer approx. 900 mm x 6°. Loading platform behind the gooseneck hydraulically raisable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps can be hydraulically shifted individually by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load capacity and approach angle per technical data sheet: C470319 Maximum ramp angle with lowered loading platform: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lift/lower valve. Axle tool kit. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer of our choice Load index 143/141J (144/144F) Braking system: WABCO EBS-E braking system according to EU regulations. Without connecting cable to tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" version as per EU regulations. (ASS 3) Metalizing: Complete HRM metalizing (High Resistance Metallisation) Complete steel structure shot blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). Rcedpfx Ageizu Ntoueb Painting 6K final treatment: Complete steel structure shot blasted after welding. 1 coat zinc-based primer, 1 coat bonding primer. Final painting with 2 coats 2K (acrylic) single-colour in RAL shades of your choice, then cavity sealing with special wax. Rims in silver. Multi-colour and special painting at extra cost. Steel construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG welding process to EN ISO 4063. Protective gas M21 per EN ISO 14175 Front wall of steel, plug-in, approx. 400 mm high Connection board for supply lines to the tractor unit at the height of the outer frame profile. ASPÖCK-UNIBOX at the front plug connection board with sockets 24N, 24S & 15-pin. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. “Anderson” socket at the front connection board. Rema 78051-00 & Amp. 150 V. Cable for supply to electro-hydraulic unit and/or electric winch (35 mm²,

Condition: used, Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts Redpodnca Hofx Aguecb -Dimensions: 335/560/H390 mm -Weight: 32 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 Rodpfx Ajckd Emjgujcb -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg

Condition: used, Digital input module, control, switchgear, PLC -Inputs: 16 -24 V DC -Product number: 7DI439.7 -Dimensions: 82/115/H60 mm -Weight: 0.2 kg Rodpfx Aednin Roguocb

Condition: used, Module carriers, subracks, terminal blocks, spring clips, controls, switchgear, PLC Rjdodnin Njpfx Aguecb -Module carrier lengths: 2x 534 mm 1x 380 mm -Field terminals: 36-pin and 72-pin -Weight: 2.8 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 57 rpm -Power: 1.1 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake Rcsdpec Nvx Uofx Agujb -Dimensions: 620/260/H260 mm -Weight: 40 kg

Condition: used, Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type no.: 4205 1021/1 -Display range: 0 V - 40 V -Installation dimensions: LxWxD approx. 140x140x90 mm Rjdpfx Aedpar Isguscb -Dimensions: 144/144/H90 mm -Weight: 1.2 kg

Condition: used, Gear motor, electric motor, electric gear motor Redpfefrlt Uox Agujcb -Speed: 1400 rpm -Power: 1.5 kW -Brake: 20.0 Nm -Shaft on both sides: Ø 14 x 20/19 x 40 mm -Protection class: IP54 -Dimensions: 430/200/H260 mm -Weight: 27 kg

Condition: used, Gear motor, electric motor -SEW-Eurodrive: gear motor type RF60DT90S4B Rcjdpfx Asgw Tuyjgujb -Speed: 72 rpm -Power: 1.1 kW -Construction: B5 -Brake: 10 Nm -Diameter shaft: Ø 30 x 60 mm -Protection class: IP 44 -Dimensions: 620/280 / H215 mm -Weight: 41 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 30 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 Rcodpfxscwuvte Agueb -Dimensions: 385/160/H255 mm -Weight: 12 kg

Condition: used, Central processing unit, control, switchgear, CPU -Central unit CP476 product number: 7CP474.60-1 -Interface module IF371 product number: 7IF371.70-1 -Analog output module AO352 product number: 7AO352.70 -Dimensions: 153/155/H62 mm Redpfx Aodnin Teguocb -Weight: 0.7kg

Condition: used, Gear motor, electric motor -Speed: 53 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 44 Rcodpjci N Hfjfx Agujb -Dimensions: -Weight: 47 kg

Condition: used, Drum heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, heating drum -Handover: in the current condition as viewed -Connection cable: damaged, see photos Rcedpexm Rptjfx Agujb -Drum heater: Type designation 1082 105 BHT 932 07/20 -Shaft: Ø 40 x 40 mm -Dimensions: Ø 180 x 760 mm -Weight: 49 kg

Condition: good (used), Central unit, control system, switchgear, CPU, PLC -Manufacturer: B&R Bernecker & Rainer, Minicontrol with Control Panel -Product number: MCGE33-0 -Individual components: see photos -Overall dimensions: 255/130/H220 mm -Weight: 2.3 kg Redpfx Aegypu Seguecb

Condition: used, CPU module, Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Several single modules -Number: 1x stations available -1x type: 7CP474.60-1 -2x type: 7DM465.7 -1x type: 7DI439.7 -Price: complete -Dimensions: 400/170/H70 mm -Weight: 3.2 kg/piece Rcodpfect Nvcex Agusb

Condition: good (used), Device tester, power supply Rjdpfscdlt Sex Agujcb -For: 15V devices -Measuring range -Measuring current: max. 300 mV -Dimensions: 250/260/H120 mm -Weight: 1.9 kg

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: SEW-Eurodrive, spur geared motor with brake -Type: R42 DT90L2BMG/HR/TF/VS -Speed: 250 rpm -Power: 2.2 kW Redpfx Ajqux N Toguecb -Shaft: Ø 25 x 50 mm -Protection rating: IP54 -Brake: 20 Nm -Dimensions: 540/260/H200 mm -Weight: 34 kg

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: SA57 DT90S4/BMG/HR/TF/IS -Speed: 48 rpm Rsdpfem Hd Sbox Agujcb -Power: 1.1 kW / 1380 rpm -Hollow shaft: Ø 30 x 150 mm -Protection class: IP54 -Brake: 20 Nm -Dimensions: 550/197/H230 mm -Weight: 37 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor Redpfx Agochq Igsuocb -Manufacturer: SEW Eurodrive, gear motor with brake -Type: R43DT90S4BMG/HF/TF -Speed: 97 rpm -Power: 1.1 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Brake: 20 Nm -Number: 5x engines available -Price: per piece -Dimensions: 570/280/H210 mm -Weight: 33 kg

Condition: excellent (used), Year of construction: 2021, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: B&R, Servo geared motor 8GP40-LSA35-00244 -Motor: Type 030S000-3 -Voltage: 400 V -Speed: 3000 rpm -Gearbox: 8GP40-080- -008S2L3 i=008 -Shaft: Ø 20 x 35 mm -Dimensions: 308/90/H133 mm Rcjdsxt Dx Uepfx Agujb -Total weight: 5.8 kg

Condition: good (used), Year of construction: 1978, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Rcedpfswnn U Eex Agueb -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Condition: good (used), Gear motor, electric motor -Speed: 55 rpm -Power: 0.18 kW -Construction: B5 angle Rcedpfscwhlbjx Agusb -Diameter hollow shaft: Ø 19 mm -Protection class: IP 55 -Dimensions: 315/130/H155 mm -Weight: 6.7 kg

Condition: good (used), Geared motor, electric motor, electric geared motor Rodpfx Agecwl Dasujcb -Speed: 14 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: 28 mm Price: per piece -Quantity: 2 available -Protection class: IP 55 -Dimensions: 420/183/H210 mm -Weight: 16 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: B&R, ACOPOS P3 servo drive -Type: 8E14X5HWT10Dimensions: 375/70/H265 mm Rjdpfx Agsxn N Anouecb -Weight: 3.9 kg.