Used Bielsa T-2 Exp. Fsb for sale (1,05,432)

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 1,122 h, load capacity: 16,000 kg, lifting height: 2,410 mm, free lift: 140 mm, fuel type: diesel, mast type: triplex, construction height: 3,130 mm, fork carriage width: 2,500 mm, fork length: 2,440 mm, empty load weight: 25,500 kg, total length: 6,840 mm, drive type: Diesel, construction width: 2,535 mm, Heavy-duty forklift - Diesel Load centre: 1200 Fork width: 250 mm Fork thickness: 105 mm Codpfx Aiexx E H Dsaogu ISO class: Terminal West Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyre type: pneumatic Front tyre size: 12.00 - 24 Front tyre condition: 80 - 100% Rear tyre type: pneumatic Rear tyre size: 12.00 - 20 Rear tyre condition: 80 - 100% Sideshift, fork positioner, (Open range outside edge to outside edge = 925 mm to 2,260 mm) (Open range inside edge to inside edge = 430 mm to 1,760 mm)

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Main frame: Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Csdpfxjxrr Uhs Aiaegu Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue Rental or sale EU-wide.

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: Cjdpfxouf Rw Tj Aiajgu 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Cjdpfxexrtlus Aiajgu Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: new, empty load weight: 936 kg, maximum load weight: 2,564 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,100 mm, color: black, construction height: 1,000 mm, working width: 2,180 mm, Automatic reverse drive, sloping rear / drive-on ramps 2, hot-dip galvanized, 35m / perforated lashing floor / e-wheel / floor storage box, * IMMEDIATELY AVAILABLE * incl. incl. sloping rear / drive-on ramps 2.35m / perforated lashing floor / e-wheel / floor storage box Technical data: - Make: Brian James - Model: T Transporter 231 - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): 550 x 210 x 0 cm - Exterior dimensions (LxWxH): 710 x 218 x 100 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 936 kg - Payload: 2,564 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Perforated steel lashing floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Additionally sloped rear ensures a particularly low drive-on angle - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, etc. Can be retrofitted at any time - Very sturdy welded steel frame - Storage compartments embedded in the loading area for drive-on ramps at the rear - 2x perforated steel ramps, galvanized steel, 2.35 m long - Sliding contact edge for drive-on ramps for different track widths - Lockable floor storage box with spring-loaded lid - Perforated track pattern made of galvanized steel - Numerous lashing points and a heavy-duty floor offer flexible lashing options and perfect grip. - Side panels color: black - Additional lashing options thanks to side railing - Removable railing all round: The multi-part side profile railing offers numerous lashing points and is removable so that wider loads can be transported. - Frame completely hot-dip galvanized - Spare wheel mounted on the drawbar for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Codpfsu Hrynox Aiajgu

Condition: new, empty load weight: 951 kg, maximum load weight: 2,549 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,100 mm, color: black, construction height: 1,000 mm, working width: 2,180 mm, Hydraulic pump / sloping rear / 2, automatic reverse drive, drive-on ramp, hot-dip galvanizing, 35m ramps / perforated lashing floor / e-wheel / floor storage box, * IMMEDIATELY AVAILABLE * incl. Hydraulic pump / sloping rear / 2.35m ramps / perforated lashing floor / e-wheel / floor storage box Technical data: - Make: Brian James - Model: T Transporter 231 - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 550 x 210 x 0 cm - External dimensions (LxWxH): 710 x 218 x 100 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 951 kg - Payload: 2,549 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Perforated steel lashing floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Additionally sloped rear ensures a particularly low drive-on angle - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, etc. can be retrofitted at any time - Very stable welded steel frame - Storage compartments for drive-on ramps at the rear recessed in the loading area - 2x perforated steel ramps, galvanized steel, 2.35 m long - Hydraulic tipping function (hand pump) incl. cylinder, for very flat drive-on ramps. Hydraulic tipping function (hand pump incl. cylinder, for very flat drive-on angle - Sliding contact edge for drive-on ramps for different track widths - Lockable floor storage box with spring-loaded lid - Perforated galvanized steel lanes - Numerous lashing points and a heavy-duty floor offer flexible lashing options and perfect grip. - Side panels color: black - Additional lashing options thanks to side railing - Removable railing all round: The multi-part side profile railing offers numerous lashing points and is removable so that wider loads can be transported. - Frame completely hot-dip galvanized - Spare wheel mounted on the drawbar for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cgedou Hryzepfx Aiaju

Condition: new, empty load weight: 946 kg, maximum load weight: 2,554 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,100 mm, color: black, construction height: 1,000 mm, working width: 2,180 mm, hydraulic pump / sloping rear / continuous ramp / perforated lashing floor / e-wheel / floor storage box, automatic reversing, drive-on ramp, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. hydraulic pump / sloping rear / continuous ramp / perforated lashing floor / e-wheel / floor storage box Technical data: - Make: Brian James - Model: T Transporter 231 - Vehicle type: car transporter - Vehicle condition: new vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 550 x 210 x 0 cm - External dimensions (LxWxH): 710 x 218 x 100 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 946 kg - Payload: 2,554 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Perforated steel lashing floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Additionally sloped rear ensures a particularly low drive-on angle - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: winches, other ramps etc. can be retrofitted at any time - Very sturdy welded steel frame - Storage compartments for drive-on ramps at the rear recessed in the loading area - Sliding contact edge for drive-on ramps for different track widths - Continuous drive-on ramp, + additional ramps, foldable, adjustable (heavy-duty) - Hydraulic tipping function (hand pump) incl. cylinder, for very flat drive-on ramps. Hydraulic tipping function (hand pump incl. cylinder, for very flat drive-on angle - Lockable floor storage box with spring-loaded lid - Hole pattern of galvanized steel lanes - Numerous lashing points and a heavy-duty floor offer flexible lashing options and perfect grip. - Side panels color: black - Additional lashing options thanks to side railing - Removable railing all round: The multi-part side profile railing offers numerous lashing points and is removable so that wider loads can be transported. - Frame completely hot-dip galvanized - Spare wheel mounted on the drawbar for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Codou Hry Iepfx Aiasgu

Condition: new, empty load weight: 954 kg, maximum load weight: 2,546 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,100 mm, color: black, construction height: 1,000 mm, working width: 2,180 mm, Automatic reverse drive, sloping rear / drive-on ramps 2, hot-dip galvanized, 35m / perforated lashing floor / e-wheel / floor storage box, * IMMEDIATELY AVAILABLE * incl. incl. sloping rear / drive-on ramps 2.35m / perforated lashing floor / e-wheel / floor storage box Technical data: - Make: Brian James - Model: T Transporter 231 - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (L x W x H): 450 x 210 x 0 cm - Exterior dimensions (L x W x H): 610 x 218 x 100 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 954 kg - Payload: 2,546 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Perforated steel lashing floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Additionally sloped rear ensures a particularly low drive-on angle - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, etc. Can be retrofitted at any time - Very sturdy welded steel frame - Storage compartments embedded in the loading area for drive-on ramps at the rear - 2x perforated steel ramps, galvanized steel, 2.35 m long - Sliding contact edge for drive-on ramps for different track widths - Lockable floor storage box with spring-loaded lid - Perforated track pattern made of galvanized steel - Numerous lashing points and a heavy-duty floor offer flexible lashing options and perfect grip. - Side panels color: black - Additional lashing options thanks to side railing - Removable railing all round: The multi-part side profile railing offers numerous lashing points and is removable so that wider loads can be transported. - Frame completely hot-dip galvanized - Spare wheel mounted on the drawbar for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cjdpeu Skvxjfx Aiaogu

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, type of input current: AC, overall weight: 1 kg, For sale: ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industrial and research applications, especially when components need to be measured in challenging environments. Fast application, easy operation. Condition: Lightly used, predominantly for trade shows, exhibitions, and training purposes only. Scope of delivery: · T-Scan Hawk 2 Lite · Class 2 blue laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS-calibrated) · Sensor cable · Transport case · Acceptance test in our facility with calibration bars in accordance with ISO 10360 · Acceptance certificate with traceability documentation · ZEISS INSPECT OPTICAL 3D Free · T-SCAN Hawk 2 sensor driver ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing, and processing of polygon meshes · Element construction: standard geometries, points, sections, curves, surfaces, dimensions · CAD import for standard formats: IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · CAD comparison with colored deviation display · Dimensioning and geometric tolerancing analysis according to ISO GPS and ASME Y14.5 · Reporting module T-SCAN Hawk 2 Sensor Driver · Setup and calibration · Guided user calibration · Data acquisition and project management · Configurable workflow assistant · Switching measurement modes and setting exposure time directly on the sensor · Automatic sensor calibration monitoring · Pre-capture of reference points with graphic support · Real-time display of sensor position and acquired 3D scan data · Continuous transformation into a common coordinate system · Merging upper and lower surfaces · Removal of background points · Automatic calculation and export of non-overlapping polygon meshes · Export of scan data (e.g., G3D format, STL format) Note: Cjdpfxsw Swplo Aiaegu The device was exclusively used for demonstration, training, and exhibition purposes, so some signs of use are visible. If required, we can provide a suitable laptop for an additional charge. 3D acceptance certificate available. We are also open to trade-in of older GOM systems upon purchase of the T-SCAN Hawk 2.

Condition: used, maximum load weight: 7,390 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 02/2004, next inspection (TÜV): 12/2025, loading space length: 13,410 mm, loading space width: 2,500 mm, loading space height: 2,640 mm, loading space volume: 89 m³, Year of construction: 2004, Equipment: ABS, KRONE 2-axle insulated box trailer, 13.40 m, with portal doors * Gross vehicle weight 29,000 kg = Payload approx. 21,840 kg * New TÜV approval available for an additional charge * Vehicle number for customer inquiries: 3271 * ABS * Eberspächer cargo space heater Cjdokf Snqepfx Aiajgu * BPW axles * 2-axle * EBS, Wabco No liability for printing or typographical errors Sale to commercial customers only Subject to errors and prior sale* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty under the terms of the sales contract. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. Warranty insurance available upon request from the insurer. * TÜV / UVV LBW / tachometer inspection and OBU device installation by our local partners. * Customs license plate valid for 30 days. All customs documents for export are available, but must be requested separately. * Toll Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * --- Visit us on our website at * Over 200 vehicles always in stock.

Condition: used, maximum load weight: 7,390 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 02/2004, next inspection (TÜV): 12/2025, loading space length: 13,410 mm, loading space width: 2,500 mm, loading space height: 2,640 mm, loading space volume: 89 m³, Year of construction: 2004, Equipment: ABS, KRONE 2-axle insulated box trailer, 13.40 m, with portal doors * Gross vehicle weight 29,000 kg = Payload approx. 21,840 kg * New TÜV approval available for an additional charge * Vehicle number for customer inquiries: 3271 * ABS * Eberspächer cargo space heater * BPW axles * 2-axle * EBS, Wabco No liability for printing or typographical errors Sale to commercial customers only Subject to errors and prior sale* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty under the terms of the sales contract. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. Warranty insurance available upon request from the insurer. * TÜV / UVV LBW / tachometer inspection and OBU device installation by our local partners. * Customs license plate valid for 30 days. All customs documents for export are available, but must be requested separately. * Toll Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * --- Visit us on our website at * Over 200 vehicles always in stock. Cedpfx Aiskf Snxoaogu

Condition: good (used), Offer 24132 + 24133 Technical data approx: - 2 pieces T - groove plates total approx. 4970 x 3880 mm - Clamping plates - length approx. 4970 mm each - Clamping plates - width approx. 1940 mm each - Top panel thickness approx. 90 mm - Panel thickness with ribbing 200 mm - 4 T - longitudinal grooves L 4970 mm each - Distance from outer edge to center of T-slot 110 mm - Distance between the T-slots 550 mm - T-slots for T-nuts M 24 - Lateral holes to connect the two panels together - Weight per panel approx. 6000 kg - Total weight approx. 12 T. Cgodpfxetiybxo Aiasu

Condition: used, Year of construction: 2017, machine/vehicle number: 117119, Ref. no. 25158 Technical specifications: - Airflow approx. 220 m³/h - Dust class M - Connection nozzle: 50 mm - Drawer Cedoxay D Hopfx Aiajgu - Pneumatic connection - Drive power: 400 V / 1.3 kW - Required space: W 1000 x H 1350 x D 500 mm - Weight approx. 120 kg

Condition: new, Year of construction: 2016, 2-post lift 4.2 t – barrier-free – Professional Line TW 242PEB43 The Professional Line lift is designed for daily professional workshop use. Features include automatic release of the safety locks and two-stage swivel pads. Fully barrier-free drive-through area. The lift is also equipped with an automatic limit switch, which stops lifting as soon as an over-height vehicle reaches the crossbeam. Each outer side of the columns has a practical plug adapter holder, providing secure storage for two plug adapters each. Anti-Lift-Up button enables precise lowering of the lift without prior automatic lifting. Also includes a convenient 230 V socket directly mounted on the control box. * Top-quality workmanship with CE certification * Manufactured according to ISO 9001 * New: Anti-Lift-Up button * New: Practical 230 V socket on control box * Protective covers in front of the columns * Automatic locking and unlocking of safety latches * High-quality support columns made from special rolled profiles * 2 hydraulic cylinders for powerful lifting and lowering * Automatic arm locking mechanism * Synchronous control via wire ropes * Telescopic support arms * Practical plug adapter holders (one per column side) for two plug adapters each ----* CE lifting capacity: 4200 kg * Max. lifting height: 1900 mm / Ad 2080 * Swing-in height: 96 mm * Lifting/lowering time approx.: 45/30 sec. * Drive voltage: 400V / 3 phase * Power: 2.2 kW * Fuse: 16 A (C/slow-blow) * Net weight: 700 kg * Lifting height (swivel pads retracted): 1900 mm * Lifting height (swivel pads extended): 1960 mm * Lifting height (plug adapter + swivel pads extended): 2060 mm * Safety unlocking: automatic * Swivel pads: 2-stage * Powder coated: yes * Anti-Lift-Up button: yes * Total width/base plate (without motor): 3436 mm * Column height: 4300 mm * Required concrete thickness: 200 mm * Support arm length / short (approx.): 740 – 1150 mm * Support arm length / long (approx.): 890 – 1390 mm * Width between columns: 2850 mm * Max. drive-through height: 4135 mm * Max. drive-through width: 2574 mm * Color: RAL 5015 (Blue), RAL 7000 (Grey) ----Stock no. 93 -----Subject to errors & prior sale WhatsApp support available! Cgodpekpl Eljfx Aiaeu If you have questions about the unit or require further information, feel free to contact us conveniently via WhatsApp. WhatsApp – German, English -- WhatsApp – German, English, Arabic

Condition: used, Year of construction: 2004, machine/vehicle number: 114465, For sale Used Konecrane single girder suspension crane 9,334 mm x 2t Codpjuvikzsfx Aiaogu We can supply the cranes including: * assembly and inspection * power rails * radio control * master controls Jan Reiling B.V. also supplies new DEMAG cranes completely customized at very competitive prices. * overhead cranes * Suspended cranes * Slewing cranes * KBK rails cranes * boat elevators All our new and used cranes which we deliver assembled are delivered including warranty! In addition, we have our own stock of about 15,000 Demag parts.

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm Cgedpfxeu Ix Dcs Aiasu centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. Csdpfx Aoyvd Upjiajgu The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Cgsdpfx Aewrn Iyoiasu Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified. Cedpofhgvwsfx Aiaogu

Condition: repair required (used), Year of construction: 2009, functionality: not functional, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete Siemens 802 D CNC Component Set – Ground Slides & Bed Description: CNC component set / machine kit featuring Siemens Sinumerik 802D control system. The machine is currently disassembled into functional subassemblies and is being sold as-is, making it an ideal project for hobbyists, machine rebuilding shops, system integrators, or for complete restoration. All components are included. Key Highlights: • Mechanics: The machine bed and support have been freshly ground and painted in RAL 5015. Cgjdpfx Aiey Sub Hsasu • Geometry: The mechanical alignment has already been professionally restored, providing the optimal basis for high precision. • Control: Includes a fully functional Siemens Sinumerik 802D CNC control system. • Feed drives: SIEMENS; Main spindle drive regulator manufactured by Siemens. • Completeness: All associated parts and assemblies are in stock and included. Perfect for refurbishing a precise CNC machine. Sold as inspected from stock, without warranty. Technical data of the MEXPOL TUB 830 C metal lathe as configured prior to disassembly: • Max turning diameter over bed: 830 mm • Max turning diameter over slide: 580 mm • Max bar diameter: 103 mm • Max turning length between centers: 1250 mm • Rapid traverse in X-/Z-axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of spindle speed steps: 3 • Diameter of front spindle bearing: 140 mm • Spindle drive power: 15 kW • Max spindle torque: 2100 Nm • Bed width: 520 mm • Center height over bedways: 420 mm • Tailstock quill diameter: 105 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse 6 • X-axis drive: SIEMENS motor (X-axis torque: 11 Nm) • Z-axis drive: SIEMENS motor (Z-axis torque: 18 Nm) • Coolant pump capacity: 25 l/min • Coolant pump motor power: 0.18 kW • Coolant pump motor speed (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3 x 400 V; 50 Hz Equipment of TUB 830C lathe: • CNC control: SIEMENS SINUMERIK 802D Sales and Delivery Conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex stock Hilden. • Validity: Offer is non-binding – subject to prior sale (only while stocks last).

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Cgedpfx Aeflt Egsiasu Total weight: 100 kg Good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack Csdpfx Aeflt Edoiaegu - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Cgedpeflt Ebjfx Aiaou Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, Year of construction: 2003, operating hours: 5,318 h, 2003 | Terex Pegson 428 Track Feeder Impact | Used Crusher | 5318 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 75000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Codpfxeyz Ubfj Aiaogu 👷‍♂️ Inspected by an independent expert 81 inspection points 58 approved ✅ 23 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine has not been running continuously for a few years, but it does undertake a few small campaigns each year. It has recently worked and is ready to work. It has been parked in the sun (no shelter) hence the oxidation and cracked hoses. We were not able to see the main and magnetic conveyors in operation during the inspection. Please look at all the photos and videos for more details. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40524 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2020, condition: ready for operation (used), A motorized transport trolley with a cover is available. Load capacity: 300kg, max. speed: 6km/h, steering roller diameter: 260mm, drive wheel diameter: 350mm, loading surface dimensions X/Y: 1250mm/600mm, machine dimensions X/Y/Z: approx. 1650mm/600mm/1750mm, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Csdpfx Aijy E S Hgeajgu