Used Bobst 102 E Ii for sale (70,437)

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Gbsdezcfhdopfx Ap Deu

Condition: used, functionality: unexamined, Equipment: CE marking, finger protection, safety light barrier, Innovative finger guarding system for pressbrakes utilizing following LASER optical safety light grids in front of the tool. Installation kit with documentation. Like new, partially sealed with protective film, very little use. Godpfx Ajx Dq T Tep Djbu

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Gbsdpfx Ajvmq Tiop Deu

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Gbodpfxocuhvue Ap Dju Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,300 rpm, spindle motor power: 30,000 W, overall weight: 9,100 kg, controller manufacturer: MAZATROL, controller model: Mazatrol Matrix, number of axes: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Additional equipment • Chip conveyor • Tool presetter Gbjdpfsx D I Rijx Ap Dsu • Autoblock chuck • Toolholders • User and maintenance manuals Machine Benefits Technical Machine Benefits • Max. Turning diameter: Ø 420 mm • Max. Turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: asa 11” • Chuck type: autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tool motor power: 7. 5 kw • Max. Speed of driven tools: 4000 rpm Extra Information Machine still under power

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm Gsdpfxsnt T Aue Ap Dsbu diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Gjdpfov Ip R Ajx Ap Dobu

Condition: excellent (used), mileage: 450 km, power: 75 kW (101.97 HP), fuel type: electric, fuel: electricity, color: silver, gearing type: automatic, number of seats: 8, Year of construction: 2023, Number of doors: 6 Gbedpfeyw Nfksx Ap Deu Emission class: Euro 0 Technical condition: very good Optical condition: very good Damage: none Warranty: None

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 67137, Technical characteristics: Work Area - Maximum clamping plate diameter: 250 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 886 mm / Rapid traverse X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse Z: 30 m/min - Y-axis travel: -85/+100 mm / Rapid traverse Y: 30 m/min - Standard closed automation (number of loading stations by workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle (Weiss) per DIN 55026: Size A6 - Maximum speed: 5,500 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Secondary Spindle HSK63 - Spindle head size/type: HSK-A63 - Nominal speed: 2,700 rpm / Nominal power: 12 kW / Nominal torque: 42.4 Nm - Maximum speed: 15,000 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Tool Holder with Motorized Tools - Turret VDI40, Siemens-drive 0.5.440.220 (manufacturer: Sauter) - Number of stations: 12 - Live tool nominal speed: 3,000 rpm / Nominal torque: 33.1 Nm - Live tool maximum speed: 10,000 rpm / Nominal torque: 56.2 Nm - Live tool nominal power at 100% duty cycle: 10.4 kW Electrical Equipment - Operating voltage: 400 V, fused 100A GL - Connected load: 45 kW Dimensions - Overall dimensions: Length = 4,021 mm, Width = 4,709 mm, Height = 3,527 mm - Weight: 8,000 kg Main Features and Capabilities: - Vertical design for optimal chip evacuation and easy loading/unloading - Control system: Siemens 840D SL - High precision with Heidenhain linear scales for X, Y, Z axes - High-power main spindle (Weiss) with a wide speed range Gsdsxxi Urjpfx Ap Dobu - High-power secondary spindle (Weiss), easily accessible for drilling/milling operations - Automated loading/unloading via integrated automation - In-process control probe: Marposs T25 - Live tooling for extended machining capabilities (drilling, milling, etc.) - Chip conveyor: Knoll - Coolant 'paper' filter unit & chiller: Knoll KF150/500 - Electrostatic mist filter: IFS type IFM1000 Machine status: NOT WORKING - Sauter turret replaced with new unit; assembly not complete – turret motor spindle installation still required - Operator panel safety switch needs replacement

Condition: used, Year of construction: 2018, Control Siemens x-travel 750 mm y-travel 660 mm z-travel 650 mm Swivel range 0 - 180 ° Swivel time (0°–180°) ca. 5 s X-axis acceleration 6 m/s² Z-axis acceleration 9 m/s² Y-axis acceleration 6 m/s² spindle tunring speed 12.000 U/min spindle diameter in front bearing 80 mm Torque S6-40% 210 Nm tool taper HSK 63 number of tool places 120 Pos. The machine was used for machining aluminum and, in our assessment, is in good used condition. It can be inspected under power by appointment. Technical features & accessories: - Twin spindle - 5-axis - Pallet changer - Minimal quantity lubrication Gedpfxoyrt A Io Ap Debu Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2021, Several machines available from vintage 2021 and 2023. Gedowcriispfx Ap Debu Ask for additional details!

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Gbedpfx Aoxrk Itsp Dsu Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Support frame for mill and motor, complete with connection for aspirated discharge.

Condition: used, Year of construction: 2014, 2014 MAZAK OPTIPLEX 3015 FIBER II CNC LASER CUTTING MACHINE Manufacturer: Mazak Model: Optiplex 3015 Fiber II Year: 2014 Location: Belgium Condition: Good working condition Technical Data - Working area: 3,000 x 1,500 mm - Fiber laser technology - Mazatrol control system - Machine weight: approx. 14,500 kg - CE marked - Power supply: 3-phase, 400 V / 50-60 Hz - Laser power: to be confirmed Description Gbedpfezxzc Usx Ap Dou Mazak Optiplex 3015 Fiber II laser cutting machine in good operating condition. The machine is designed for high-speed, high-precision sheet metal processing and offers the efficiency and low operating costs associated with fiber laser technology. The machine is equipped with the original Mazatrol control system and can be inspected under power by appointment. Suitable for a wide range of applications in metal fabrication, subcontract manufacturing, and industrial production. Operating Hours - Power On Time: 21,927 h - Laser On Time: 20,691 h - Automatic Operation Time: 5,261 h - Cutting Time: 2,913 h Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Mazak Model: Optiplex 3015 Fiber II Year: 2014 Location: Belgium * Working area: 3,000 x 1,500 mm * Machine weight: approx. 14,500 kg * Power On Time: 21,927 h * Cutting Time: 2,913 h * Automatic Operation Time: 5,261 h

Condition: used, mileage: 1,84,000 km, power: 145 kW (197.14 HP), first registration: 09/1989, fuel type: diesel, color: white, gearing type: automatic, number of seats: 10, Year of construction: 1989, ORION II LOW-FLOOR BUS / SHOWROOM / EXHIBITION VEHICLE / SUITABLE FOR HISTORIC LICENSE (H-PLATE) / GERMAN REGISTRATION / V8 DIESEL ENGINE WITH 8.2 L DISPLACEMENT VEHICLE HISTORY - GERMAN VEHICLE - GERMAN REGISTRATION - IMMEDIATE CLASSIC (H-PLATE) REGISTRATION POSSIBLE - RARE US SPECIAL VEHICLE - FORMER PROMOTIONS AND SHOWROOM VEHICLE - YEAR OF MANUFACTURE: [please specify] - MADE IN THE USA - MANUFACTURER: BUS INDUSTRIES OF AMERICA INC., ORISKANY, NEW YORK - VIDEO OF INTERIOR AND EXTERIOR AVAILABLE UPON REQUEST. FOR MORE INFO ABOUT THIS VEHICLE PLEASE CALL DIRECTLY. VEHICLE EQUIPMENT - ORION II LOW-FLOOR BUS - SHOWROOM CONVERSION - TRADE SHOW VEHICLE - ROADSHOW VEHICLE - EVENT VEHICLE - V8 DIESEL ENGINE - AUTOMATIC TRANSMISSION - LOW ENTRY - LARGE OPEN INTERIOR Gbedpfx Apszgqp Hs Dju - SEATING WITH STORAGE - EXTENSIVE DISPLAY AREAS - HUAWEI FUSIONSOLAR EQUIPPED - SOLAR TECHNOLOGY DEMO VEHICLE - SPECIAL CONVERSION - LARGE REAR DOORS - IDEAL AS A MOBILE EXHIBITION UNIT - HIGH-VISIBILITY PROMOTIONAL VEHICLE SPECIAL FEATURES - EXTREMELY RARE ORION II LOW-FLOOR BUS, MADE IN THE USA - PROFESSIONALLY CONVERTED FOR HIGH-END PROMOTIONS AND SHOWROOM EVENTS - PERFECT FOR TRADE SHOWS, EVENTS, ROADSHOWS, MOBILE CONSULTING, OR PROMOTIONAL USE - ALSO IDEAL FOR CONVERSION TO FOOD TRUCK, MOBILE BAR, INFO BUS, OR EXHIBITION VEHICLE - IMMEDIATELY OPERABLE IN GERMANY DUE TO EXISTING REGISTRATION - ELIGIBLE FOR HISTORIC LICENSE (H-PLATE), ESPECIALLY INTERESTING FOR COLLECTORS AND BUSINESSES - CLASSIC AMERICAN LOW-FLOOR DESIGN WITH UNIQUE LOOK - HIGHLY DISTINCTIVE AND ATTENTION-GRABBING TECHNICAL INFORMATION - MANUFACTURER: BUS INDUSTRIES OF AMERICA INC. - MODEL: ORION II - YEAR OF MANUFACTURE: September [please specify year] - FUEL: DIESEL - OUTPUT: 145 KW AT 2,600 RPM - V8 ENGINE - PERMITTED GROSS VEHICLE WEIGHT: 9,000 KG - TIRE SIZE: 255/80 R22.5 - LOW-FLOOR DESIGN - HEAVY SPECIAL CONVERSION - LARGE SIDE SURFACES FOR ADVERTISING OR BRANDING FURTHER DETAILS - VEHICLE AVAILABLE IMMEDIATELY - VEHICLE RUNS AND DRIVES WITHOUT ISSUE, HOWEVER: EMITS SMOKE!! - TIRES IN GOOD CONDITION - ORIGINAL US VEHICLE WITH GERMAN REGISTRATION - GROSS VEHICLE WEIGHT: 9,000 KG EXPORT EXPORT SALES ONLY WITH MIN. DEPOSIT OF €500 – €2,000 EXPORT REGISTRATION (EXW) POSSIBLE WITHIN 10 MIN. (APPROVED EXPORTER) VEHICLE RESERVATIONS ONLY ACCEPTED IN WRITING. ORAL AGREEMENTS ARE NON-BINDING. NO PRICE NEGOTIATION BY PHONE. FIXED PRICE. IF YOUR BUDGET IS INSUFFICIENT, PLEASE ONLY INQUIRE FOR VEHICLES IN YOUR PRICE RANGE. SPECIFICATIONS, ERRORS, AND PRIOR SALE SUBJECT TO CHANGE. LEGAL NOTICE THIS LISTING DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF §145 BGB. IT IS FOR THE PURPOSE OF INITIATING A CONTRACT ONLY. ALL INFORMATION PROVIDED WITHOUT GUARANTEE. NO WARRANTED CHARACTERISTICS. SALE IS SUBJECT TO OUR GENERAL TERMS AND CONDITIONS ONLY.

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm Gbedsu Nfinjpfx Ap Dou biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,148 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 650 mm, spindle motor power: 37,000 W, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, positioning accuracy: 0.008 mm, tool weight: 20,000 g, number of slots in tool magazine: 48, number of axes: 5, This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details. Technical Data • Machine Type: Twin-Spindle Horizontal Machining Center • Control Unit: Siemens SINUMERIK 840D sl • Operator Panel: Siemens OP15T with integrated TCU • ECO Mode • Remote Diagnostics (eWON Router) • PROFIBUS Interface for Automatic Workpiece Loading • Signal Tower (3-color LED) Travels • X-Axis Travel: 750 mm • Y-Axis Travel: 660 mm • Z1-Axis Travel: 650 mm • Z2-Axis Travel: 650 mm Rapid Traverse • X-Axis: 60 m/min • Y-Axis: 60 m/min • Z1/Z2 Axes: 90 m/min Axis Performance • X-Axis Acceleration: 6 m/s² • Y-Axis Acceleration: 6 m/s² • Z1/Z2 Axis Acceleration: 9 m/s² • Feed Force X: 15,000 N • Feed Force Y: 15,000 N • Feed Force Z1/Z2: 10,000 N • Positioning Accuracy: 8 µm Spindle • Number of Spindles: 2 • Precision Motor Spindles • Tool Holder: HSK-A63 (DIN 69893-1) • Spindle Speed: 12,000 rpm • Spindle Power: 37 kW (40% ED) • Spindle Torque: 85 Nm (40% ED) • Maximum Torque: 100 Nm • Direct Drive Axes / Swivel System • 2 NC B-Axes • 2 NC Rotary Axes (A-Axes) • Swivel Range: 0°–180° Gjdpfxjzqr Skj Ap Debu • Swivel Time (0°–180°): approx. 5 s Technology • Independent X, Y and Z Axes for both Spindles • Separate Direct Measuring System for each Axis • Independent Z-Axis Correction Range: 5 mm Tool Magazine • 96 Tool Stations (2 × 48) • Maximum Tool Length: 400 mm • Maximum Tool Diameter (Adjacent Pockets Occupied): 80 mm • Maximum Tool Diameter (Adjacent Pockets Free): 250 mm • Maximum Tool Weight: 20 kg Lubrication • Automatic Central Lubrication • 5-Channel Media Transfer (Oil or Air) Cooling / Coolant • 70 bar Through-Spindle Coolant • Coolant Tank Capacity: 2,300 l • Coolant Flow Rate: 400 l/min • High-Pressure Pump: 15 kW • Automatic Coolant Refill • Coolant Cleaning System • Water Cooling • Cooling Water Temperature: 22 °C • Cooling Water Flow Rate: 800 l/h Chip Management • Scraper-Type Chip Conveyor • Chip Conveyor Discharge Height: < 1,150 mm • Dry Machining Ready • MMS (Minimum Quantity Lubrication) Compatible Electrical Data • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V DC • Connected Load: 150 kW Additional Features • Automatic Workpiece Loading Interface • Automatic Tool Changer • Closed Machine Enclosure • Machine Lighting • Pneumatic Equipment • Energy Monitoring System • Automatic Media Connections • Modular Machine Design Additional Information • Motor Spindle 11 replaced in Week 19/2024 • Motor Spindle 12 replaced in Week 24/2023 Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 1984, machine/vehicle number: 6229, Offer 24483 Gbedpeu Eq Rpsfx Ap Dou Technical data: - max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle setting preselectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - of the bending beam 50 mm - of the lower beam 50 mm - E. foot switch - Upper beam drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

Condition: good (used), functionality: fully functional, Parker Parkrimp II 83 CE crimping machine for high-pressure hoses (hydraulic hoses) Crimping force: 125t (at max. 5,000 PSI) Gsdpev Rnnlsfx Ap Debu Suitable for the following fitting series: 43, 71, 77, 25, 26, 81, HY series (611HT, 801, 836) The following crimping dies are included: 5/16" Purple 80C B05 & A05 3/8" Yellow 80C A06 5/8" Orange 80C B10 & A10 1/4" Red 80C B04 & A04 3/4" Green 80C A12 & B12 & C12 & 12 (78) 1/2" Blue 80C A08 & B08 1" Black 80C A16 & B16 & C16 & 16 (78) 1 1/4" White 80C A20 (2 pcs) & C20 2" Red C24 Weight: 450 kg #8247

Condition: like new (used), Year of construction: 2023, HAITIAN JUPITER JU III 18500/22300 B ServoDrive – 2-Platen Injection Moulding Machine Operating Hours: 6,000 automatic cycles TECHNICAL SPECIFICATIONS Clamping force: 1,850 tons (18,500 kN) Tie bar distance (H × V): 1,870 × 1,425 mm Platen dimensions: 2,590 × 2,150 mm Min. mould height: 750 mm Max. mould height: 1,600 mm Max. daylight: 3,350 mm Opening stroke: 2,600 / 1,750 mm INJECTION UNIT Screw diameter: 159 mm L/D ratio: 22.4 Shot volume: 12,017 cm³ Shot weight (PS): 10,935 g Injection rate: 1,583 g/s Max. injection pressure: 1,184 bar GENERAL INFORMATION Drive system: Servo-hydraulic Controller: KEBA Installed power: 318 kW (excluding heating) Machine dimensions: 12.75 × 4.15 × 4.47 m Gbedoz Rqpmspfx Ap Dou Machine weight: 101,000 kg Oil capacity: 1,720 litres EQUIPMENT & OPTIONS 7 hydraulic core pulls (3 fixed + 4 moving platen) 8 hydraulic cascade circuits 64 hot runner heating zones Euromap 67 robot interface Euromap 73 interface Euromap 70.1 magnetic platen interface Rexroth proportional injection valve Oil preheating system Additional programmable I/O CE electrical sockets Oil collection tray Operator access platforms OPTIONAL AUTOMATION SEPRO 7X 55 LV Robot X-axis: 5,500 mm Y-axis: 1,500 mm Z-axis: 3,000 mm Payload: 40 kg Servo wrist: R1 + R2

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Gedsxqgxrepfx Ap Djbu

Condition: like new (used), functionality: fully functional, input voltage: 400 V, input current: 251 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP21, year of last overhaul: 2026, continuous power: 132 kW (179.47 HP), Equipment: type plate available, Exact model designation: Danfoss FC-102N132T4E2MH4XLCXXXSXXXXA0BXCXXXXD0 Output power and output current: 132 kW | 260 A 134N1389 ° Includes inspection seal! ° 0 motor operating hours – manufacturer rating allows for over 100,000 hours! ° Easy operation via integrated control panel ° Quick parameter setup possible thanks to the Quick Menu ° Original operating manual for commissioning included Gbsdpfx Aez Rk T Esp Dsu Only 3 units left in stock! The item has been reset to factory settings and is therefore in its original condition as supplied by the manufacturer. Please refer to the original product photos for the visual condition. Fully functional and ready for immediate use.

Condition: excellent (used), mileage: 6,81,412 km, power: 169 kW (229.78 HP), first registration: 07/2000, axle configuration: 4x2, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, Year of construction: 2000, Equipment: crane, Crane Number of hydraulic extensions: 2 Number of manual extensions: 1 Number of support legs: 2 Remote control: × = More information = Cab: single Front axle: Steering Rear axle: Double wheels GVW: 18.000 kg Crane: HIAB 102, year of manufacture 1999, behind the cab Technical condition: very good Visual appearance: very good Price: On request Registration number: NC0059 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Gbjdpfx Aoy Dic Nsp Dou Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 6,81,412 km, power: 169 kW (229.78 HP), first registration: 07/2000, axle configuration: 4x2, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, Year of construction: 2000, Equipment: crane, Crane Number of hydraulic extensions: 2 Number of manual extensions: 1 Number of support legs: 2 Remote control: × = More information = Cab: single Front axle: Steering Rear axle: Double wheels GVW: 18.000 kg Crane: HIAB 102, year of manufacture 1999, behind the cab Technical condition: very good Visual appearance: very good Price: On request Registration number: NC0059 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Godpfxey Diive Ap Dsbu When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,794 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, overall weight: 4,380 kg, controller manufacturer: MAZATROL, controller model: Matrix NEXUS, number of axes: 2, Horizontal turning machine manufactured in 2007. This Mazak QUICK TURN NEXUS 200-II features a maximum turning diameter of Ø 350 mm and a turning length of 550 mm. It is equipped with a chuck size of 200 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200-II machine we have for sale. Contact us for further details. • Control: Mazatrol Matrix NEXUS • Chuck Size: 200 mm (8") • Maximum Turning Diameter: Ø 350 mm • Maximum Turning Length: 550 mm • Machine Weight: 4,380 kg Gbodpfx Aezg Dz Asp Dou • Tool Eye (Tool Setter): Yes • Coolant System: Currently not functional (coolant/water cannot be added) • Additional optional Accessories: Chip Conveyor, various clamping jaws included • Machine On Hours: 24,079 h • Spindle Hours: 8,794 h Technical Specification Counter Spindle Yes Driven Tools No

Condition: ready for operation (used), Year of construction: 2016, spindle motor power: 11,000 W, spindle speed (max.): 8,000 rpm, overall weight: 3,900 kg, total width: 1,390 mm, total height: 1,745 mm, bar diameter (max.): 38 mm, product length (max.): 3,020 mm, number of axes: 8, This 8-axis UTIMAC ISOLA XD 38 II Siemens was manufactured in 2016. It features a maximum bar capacity of Ø38 mm and a spindle speed of 8,000 rpm. The machine includes a counter spindle with a speed of 7,000 rpm and a rapid traverse of 32 m/min. If you are looking to get high-quality turning capabilities, consider the UTIMAC ISOLA XD 38 II Siemens swiss type turning machine we have for sale. Contact us for further details. • Main spindle: • Max. bar capacity: 38 mm (42 mm optional) • Stroke (versions): H = 320 mm; N = 90 mm; NH = 90 / 160 mm • Rapid traverse: 32 m/min • Counter spindle: • Max. bar capacity: 38 mm • Stroke: 280 mm • Speed: 7,000 rpm • Motor power: 11 kW • Vertical tool plate axes X1–Y1: • Turning tools: 5 (16x16) • Standard rotating tools: 5 • Rotating tools for B-axis: 4 Gsdpsy U H Nnsfx Ap Djbu • Fixed spindle stations: 5 • Motorized tool power: 2.6 kW • Motorized tool speed: 6,000 rpm • Rapid traverse: 32 m/min • B-axis: • Angular adjustment: 145° (+90° / -55°) • Number of tools: 6 (3 ER16 + 3 ER11) • Motorized tool speed: 6,000 rpm • Motor power: 1.9 kW • HY2 version: • Tool stations: 8 (4 fixed + 4 motorized) • Coolant tank capacity: 230 L Technical Specification Counter Spindle Yes Driven Tools Yes