Strung vertical

Scherer Feinbau VDZ220 XL EVO II

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Dodpfx Ajxm Sxvokgekn Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. Dsdpfxex Hn D De Akgokn - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: good (used), La San Marco NEW 105 MULTIBOILER 2G coffee maker New price 8.800 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. The Multiboiler technology allows precise temperature control for each boiler of each group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature setting that can be easily adjusted via the touchscreen keypad. The innovative keypad with touch screen technology is complemented by a graphic RGB display. Set-up and programme guidance is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. Workstation lighting with customisable multicolour LEDs makes the machine even more ergonomic with an eye to aesthetics. Groups: 2 Power: 5.3 kW Steam lance: 2 Dkjdpjkyt Nrsfx Akgjn Boiler: 10 L + 2 x 0,45 L Operation: Touch Display Multiboiler: Yes Power 230V: Yes Hot water: Programmable Power 380V: No Size LxDxH : 790 x 535 x 515 mm Shape: Traditional Barista Lights: Yes Item condition: defective, for spare parts or for hobbyists You can find more SM NEW 105 models - new and used - in our shop! International shipping costs on request!

Condition: used, Technical details: spindle diameter: 120 mm x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm W-axis (spindle longitudinal): 600 mm Speed of boring spindles: 1- 2000 U/min. spindle taper ISO: 50 table surface area: 1000 x 1000 mm total power requirement: 55 kW weight of the machine ca.: 18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets Dksdpfx Ajxt El Ajkgjn coolant attachment *

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Dkjdpfox N Atfsx Akgen

Condition: used, Year of construction: 1999, Pallet size 800 x 800 mm X/Y/Z - 1250/1000/850 mm Spindle taper BT 50 Spindle speeds 5000 rpm Tool changer w/80 stations Control: Dkjdpjv Rntuofx Akgen Fanuc 18 i-M Equipped with: 2 pcs. pallets

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 106374, Technical characteristics: Work Area - Chuck diameter: 160 mm - Maximum weight of chuck + workpiece: 45 kg - Maximum workpiece diameter/height: 100/400 mm - Distance spindle nose to origin of tailstock: 795.5 mm - X1/X2 working stroke: 340 mm / Rapid traverse in X: 30 m/min - Z1/Z2 stroke: 625 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading nests by workpiece diameter): 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm) Main Spindle - Spindle according to DIN 55026: Size KK5 - Maximum speed: 8,500 rpm - Power at 100% / 40% duty cycle: 34 / 26.5 kW - Torque at 100% / 40% duty cycle: 75 / 48 Nm Tailstock - Interface: MK3 Dodpfx Akexxtkwsgekn - Clamping force: 120 N/bar - Clamping stroke: 5 mm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 – BMT65 - Number of positions: 2 x 12 (1 gripper per turret) - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 120 A - Connected load: 45 kVA Dimensions - Total dimensions: Length = 5,300 mm with chip conveyor, Width = 1,760 mm, Height = 3,650 mm - Weight: 7,500 kg Main Features and Capabilities - Vertical design: Optimized chip evacuation and automatic loading/unloading - Control: GE Fanuc FS 32i - High precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automation: EMAG O-type – Parts are loaded and unloaded automatically via integrated automation - Live tools: Allows drilling and milling operations - Tool life monitoring with sister tool management - Chip conveyor, coolant unit, switchable dual cartridge filter, high pressure pump (15 bar) - Fully enclosed working area, LED light in working area - Documentation: Available both electronically and as hardcopy book Machine Status: NOT WORKING - X-axis drive - Five electrical switches (Siemens) - Hydraulic pump - Operator panel (in stock, needs installation) - Valve chiller - Pressure switch for oiling unit - Emulsion tank pump - Four emulsion circuit switches (electrovalves) - Pressure switch for hydraulic circuit - Complete hydraulic block

Condition: used, Year of construction: 2003, functionality: fully functional, HORIZONTAL MACHINING CENTER "FAMUP" MOD. MF 650 CNC FANUC SPINDLE HSK 63 15,000 RPM TRAVELS MM 700X660X550 PALLET MM 500X500 FULL ROTARY TABLE ATC 50 POSITIONS HIGH-PRESSURE COOLANT Dsdpfx Akexwccmogjkn CHIP CONVEYOR YEAR 2003

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,850 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,525 mm, controller model: Fanuc 16 i- M , rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel path X: 1,850 mm Travel path Y: 1,250 mm Travel path Z: 1,525 mm Pallet changer type: double (2-station) Pallet size: 1,250 x 1,000 mm Tool changer: 80-station Tool holder: ISO 50 Drive power: 30 kW Spindle speed: 20–6,000 rpm Maximum workpiece weight: 5,000 kg Rotary table: 360 x 1° Feed rates – automatic programming: 0–15,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Control unit: Fanuc 16i-M Total power requirement: 60 kW Dimensions & Weight Required installation space: approx. 8.3 x 7.3 x 4 m Machine weight: approx. 27 t Operating Hours Total operating hours: 84,857 h Dsdsx Dcb Nepfx Akgjkn Automatic mode hours: 31,451 h Spindle hours: 28,149 h EQUIPMENT Chip conveyor High-pressure cooling Internal coolant supply Approx. 300 SK 50 tool holders Renishaw measuring probe Filter belt system with internal cooling (IKZ) Extraction system